Philips 32HFL5573D/10 Installation Manual

[Page 1] Philips 32HFL5573D/10

Philips Hospitality TV Installation Manual for 32HFL5573D/10 40HFL5573D/10 46HFL5573D/10 55HFL5573D/10 Version 1.0 ...

[Page 2] Philips 32HFL5573D/10

1 Contents 1. Requirements before starting the installation .......................................................................................................... 2 2. Find out the state of the TV .........................................

[Page 3] Philips 32HFL5573D/10

2 1. Requirements before starting the installation Before starting the installation, make sure that you have everything you need at hand. Master remote control 22AV8573 or Guest remote control 22AV1104A And USB stick ...

[Page 4] Philips 32HFL5573D/10

3 2. Find out the state of the TV It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before. If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See ...

[Page 5] Philips 32HFL5573D/10

4 3. Re-install TV If you want to start an installation from scratch you can always re-install the TV. This can be done by using the option: Re-install TV set. If PBS is active you can access the setup menu press the ...

[Page 6] Philips 32HFL5573D/10

5 Press “OK” to access the sub-menu, navigate to “Reinstall TV”. Press “OK” to reinstall the TV set. If all is correct select “YES” and press “OK”. After this operation the TV will power off and on and display the ins...

[Page 7] Philips 32HFL5573D/10

6 4. Installation wizard When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen. Here you will need to select your preferred language. After this, you will need to select the ...

[Page 8] Philips 32HFL5573D/10

7 The next step is to select ‘Wall mounted’ or ‘On a TV stand’. This option changes some settings for the audio and image of the TV. Now you can select the visual and hearing impaired options. If you select ‘On’, your TV wil...

[Page 9] Philips 32HFL5573D/10

8 For the channel installations, select ‘Install TV channels’ and press ‘OK’ Then you can select ‘Continue’ and press ‘OK’ again. Here you can select the type of channels you would like to install and what preferenc...

[Page 10] Philips 32HFL5573D/10

9 Note: If all options are disabled you have to go down to the Digital channels option and set the digital channels to ON. A screen is displayed to make changes to set the channel list/map configuration: [Symbol rate mode]: Automatic TV ...

[Page 11] Philips 32HFL5573D/10

10 Frequency step size has two options: 1. “1 MHz” – With Full scan, the step size to search for channels is 1 MHz. The scan will take more time but will find also channels broadcasted not according to the channel grid. 2. “8 MHz (...

[Page 12] Philips 32HFL5573D/10

11 During the channel search you can see the progress bar and how many channels are found at that time. When the search is done, you should see “Channel search complete” and a summary of the channels found. In this case: Digita...

[Page 13] Philips 32HFL5573D/10

12 The wizard will ask you some questions about which image you prefer, select the option you desire and press “OK” on the remote control. Once this wizard is done, you will return to the installation menu again. The network wi...

[Page 14] Philips 32HFL5573D/10

13 Please select “Next” and press OK to continue The connection will be made to wireless network (special dongle required) or via wired network, depending on preferences. TV will automatically acquire an IP address if this is availab...

[Page 15] Philips 32HFL5573D/10

14 When you are done with this, select “Done” and press ‘OK’ on the remote control. After pressing “Done” you have completed the installation of the TV and you should see this screen. Press “OK” on the remote control to e...

[Page 16] Philips 32HFL5573D/10

15 5. Channel options a. Reordering channels For reordering TV channels the channel plan from PBS Setup must be used. In consumer menu you cannot rearrange channels. The PBS Setup can be accessed by using the Yellow remote (RC 22AV8573 M...

[Page 17] Philips 32HFL5573D/10

16 Navigate to the channel that you want to move and press “OK” on the remote control to select that channel. The arrows around the channel indicate that the channel is selected and can be moved. Use the arrow keys to move the channel to...

[Page 18] Philips 32HFL5573D/10

17 Press “OK” on the remote control to confirm that you are done with the re-ordering. b. Rename channels Select the channel, press the “Options” button on the remote control and select “Rename” to change name of...

[Page 19] Philips 32HFL5573D/10

18 6. PBS Mode Select the Setup menu language to be English, French, German or Italian. [Off]: The TV operates as a basic (consumer) TV. [On]: All settings in the PBS mode Setup menu are active. Only by switchin...

[Page 20] Philips 32HFL5573D/10

19 [On] To enable the welcome message. [Off] No welcome message Line 1: First line of the welcome message. Line 2: Second line of the welcome message. Clear: Will delete the message entered on the welcome messa...

[Page 21] Philips 32HFL5573D/10

20 [Off]: PBS setup menu can be accessed by both Guest remote control and Master remote control 22AV8573 (yellow) or RC2573 (green). Guest remote control access to the set up menu only possible with code 3,1,9,7,5...

[Page 22] Philips 32HFL5573D/10

21 Allows the menu to control external HDMI-CEC. [Off]: Disables TV functionality to control external HDMI-CEC devices. [On]: Enables TV functionality to control external HDMI-CEC devices. Enables or disables USB break-in ...

[Page 23] Philips 32HFL5573D/10

22 Enables or disables the use of the EPG by pressing the EPG button: [Off]: No EPG services available [Now & Next]: EPG (Now/Next) services available [8 Day EPG]: EPG (8 Day) services available Note: EPG availability depend...

[Page 24] Philips 32HFL5573D/10

23 [Freeze on no signal] When this feature is enabled, the TV will display the last received frame in case of signal loss on DVB signals. Show OSD with scrambled TV channel. Power settings The power on func...

[Page 25] Philips 32HFL5573D/10

24 Enables or disables the use of the automatic switch off functionality. The TV will switch off if no RC action is noticed after 240 minutes: [Off]: The TV will not switch off after 240 minutes [On]: The TV will switch of ...

[Page 26] Philips 32HFL5573D/10

25 Manual set the Time. Select the source for the clock time: [Automatic]: Clock time is retrieved from the “Download Program” channel. [Manual]: The clock time is set using the Time Setting option. Note: If the p...

[Page 27] Philips 32HFL5573D/10

26 Set the Daylight saving options: [Set]: Off, On Check [Feature settings] (on page 31 …) [Off]: The main speakers are muted. The RC can control the volume and mute the headphone/bathroom speaker [On]: The main s...

[Page 28] Philips 32HFL5573D/10

27 The default volume for headphones can be set. The value define will be applied when the headphones are connected. Restore the factory default of the PBS Menu. Channel installation is not affected. A shortcut to ente...

[Page 29] Philips 32HFL5573D/10

28 Check Smart Clone section Check RF Download section After storing PBS settings, the TV will restart to apply the new parameters. Now you can clone all settings to other TV sets by using the option TV to USB and USB to TV. Check ho...

[Page 30] Philips 32HFL5573D/10

29 7. Welcome Logo There are 2 Philips logos displayed at startup. The second logo can be replaced by a picture uploaded via USB. File format: 960 x 540.jpg file. The Welcome Logo is displayed only when Standby mode is set to “Green”....

[Page 31] Philips 32HFL5573D/10

30 8. Smart Clone Smart Clone With Smart Clone it is possible to copy to/from a USB device TV the configuration data and channel list data. Place a USB Memory stick in the USB side connector of the TV. *The USB device should be formatted a...

[Page 32] Philips 32HFL5573D/10

31 9. Feature settings [Multi RC] This function allows that up to four televisions can be installed in a room whereas every TV will listen to its own RC. Once the TV is set, also every RC can be set to remember its connected TV: [Off] ...

[Page 33] Philips 32HFL5573D/10

32 10. RF Download Instead of using a USB memory device to do cloning and firmware update, this upgrading is also possible using the RF infrastructure. This is supported by SmartInstall (Philips Hospitality RF Download mechanism) ...