Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual

Download or browse on-line these Owner's Manual for Mitsubishi Electric GRANDIS OXPE10E1 Automobile.

Mitsubishi Electric GRANDIS OXPE10E1 Manual Information:

This manual for Mitsubishi Electric GRANDIS OXPE10E1, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 273 pages, and the size of the file at download is . The document type is Owner's Manual.

Download Manual

Summary of Contents:

[Page 1] Mitsubishi Electric GRANDIS OXPE10E1

GRANDIS OWNER’ S MANUAL GRANDIS - ENGLISH - OXPE10E1 ...

[Page 2] Mitsubishi Electric GRANDIS OXPE10E1

Table of contents Overview General information Locking and unlocking 1 Seat and seat belts 2 Instruments and controls 3 Starting and driving 4 For pleasant driving 5 For emergencies 6 Vehicle care 7 Maintenance 8 Specifications 9 ...

[Page 3] Mitsubishi Electric GRANDIS OXPE10E1

Instruments and Controls (Driver’s area) E00100104900 LHD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 17 16 15 1. Instruments p. 3-02 2. Windscreen wiper and washer switch p. 3-23 Rear window wiper and washer switch p. 3-24 3. Ignition switch p. 4-08 4. Aut...

[Page 4] Mitsubishi Electric GRANDIS OXPE10E1

1 RHD 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1. Instruments p. 3-02 2. Windscreen wiper and washer switch p. 3-23 Rear window wiper and washer switch p. 3-24 3. Ignition switch p. 4-08 4. Auto-speed control lever* p. 4-25 5. Card holder p. 5-42 ...

[Page 5] Mitsubishi Electric GRANDIS OXPE10E1

Instruments and Controls (Instrument panel) E00100104913 LHD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1. Instrument panel upper box p. 5-39 2. Multi centre display* p. 3-09 Multi display station* Refer to the separate “Multi display station owner�...

[Page 6] Mitsubishi Electric GRANDIS OXPE10E1

RHD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1. Instrument panel upper box p. 5-39 2. Multi centre display* p. 3-09 Multi display station* Refer to the separate “Multi display station owner’s manual” 3. Front passenger’s airbag OFF indication lam...

[Page 7] Mitsubishi Electric GRANDIS OXPE10E1

Interior (Front area) E00100203539 LHD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1. Lock switch p. 1-12, 1-13 2. Electric window control switch p. 1-11 3. Room lamp & map lamps p. 5-35, 8-26, 8-30 4. Sunglasses pocket* p. 5-39 5. Inside rear-view mir...

[Page 8] Mitsubishi Electric GRANDIS OXPE10E1

1 2 3 4 5 6 7 8 RHD 9 10 11 12 13 14 15 1. Sunglasses pocket* p. 5-39 2. Room lamp & map lamps p. 5-35, 8-26, 8-30 3. Inside rear-view mirror p. 4-06 4. Lock switch p. 1-12, 1-13 5. Electric window control switch p. 1-11 6. Adjustable seat belt ...

[Page 9] Mitsubishi Electric GRANDIS OXPE10E1

Interior (Rear area) E00100203542 LHD 1 2 3 4 6 7 8 9 10 5 1. Sunroof switch* p. 1-13 2. Rear heater*/Rear cooler* p. 5-09 Rear automatic air conditioning* p. 5-09 3. Personal table (front seats only)* p. 5-42 4. Second seats p. 2-07 5. Bottle hold...

[Page 10] Mitsubishi Electric GRANDIS OXPE10E1

RHD 1 2 3 4 5 6 7 8 9 10 1. Assist grip p. 5-44 Coat hooks p. 5-44 2. Cup holder (for second seats) p. 5-40 3. Supplemental restraint system - curtain airbag p. 2-39 4. Bottle holder (for third seats) p. 5-41 5. Third seats p. 2-10 6. Bottle holder ...

[Page 11] Mitsubishi Electric GRANDIS OXPE10E1

Luggage area E00100400833 1 2 3 4 5 6 1. Luggage floor box p. 5-39 2. Warning triangle retaining bands p. 5-45 3. Spare wheel p. 6-08 4. Tools and jack p. 6-06 5. Luggage hooks p. 5-45 6. Rear side box p. 5-39 Overview ...

[Page 12] Mitsubishi Electric GRANDIS OXPE10E1

Exterior E00100503558 1 2 3 4 5 6 8 7 9 10 11 12 1. Sunroof* p. 1-13 2. Antenna p. 5-31 3. Fuel tank filler p. 03 4. Side turn-signal lamps p. 3-21, 8-25 5. Outside rear-view mirrors p. 4-07 6. Position lamps p. 3-18, 8-25, 8-28 7. Headlamps, low b...

[Page 13] Mitsubishi Electric GRANDIS OXPE10E1

1 2 3 4 5 6 7 8 9 10 11 12 1. High-mounted stop lamp p. 8-25 2. Locking and unlocking p. 1-06 Keyless entry system* p. 1-04 3. Tyre inflation pressures p. 8-12 Changing tyres p. 6-11 Tyre rotation p. 8-13 Tyre chains p. 8-14 Wheel covers* p. 6-13 4....

[Page 14] Mitsubishi Electric GRANDIS OXPE10E1

Fuel selection...................................................................................02 Filling the fuel tank..........................................................................03 Installation of accessories............................

[Page 15] Mitsubishi Electric GRANDIS OXPE10E1

Fuel selection E00200102343 Recommen- ded fuel Petrol-powered vehicles Unleaded petrol octane num- ber (EN228) 95 RON or higher Diesel-powered vehicles Cetane number (EN590) 51 or higher CAUTION l For petrol-powered vehicles, the use of lea- ded f...

[Page 16] Mitsubishi Electric GRANDIS OXPE10E1

Filling the fuel tank E00200202142 WARNING l Petrol is highly flammable and explosive. You could be burned or seriously injured when handling it. When refueling your ve- hicle, always turn the engine off and keep away from flames, sparks, and sm...

[Page 17] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l Since the fuel system may be under pres- sure, remove the fuel tank filler tube cap slowly. This relieves any pressure or vac- uum that might have built up in the fuel tank. If you hear a hissing sound, wait un- til it stops before removi...

[Page 18] Mitsubishi Electric GRANDIS OXPE10E1

Even when such parts are officially authorized, for example by a “general operators permit” (an ap- praisal for the part) or through the execution of the part in an officially approved manner of construc- tion, or when a single opera...

[Page 19] Mitsubishi Electric GRANDIS OXPE10E1

Used engine oils safety instructions and disposal information E00200600025 WARNING l Prolonged and repeated contact may cause serious skin disorders, including dermatitis and cancer. l Avoid contact with the skin as far as pos- sible and wash...

[Page 20] Mitsubishi Electric GRANDIS OXPE10E1

Keys..............................................................................................1-02 Electronic immobilizer (Anti-theft starting system).....................1-03 Keyless entry system*....................................................

[Page 21] Mitsubishi Electric GRANDIS OXPE10E1

Keys E00300102096 The key fits all locks. Type 1 WARNING l When taking a key on flights, do not press any switches on the key while on the plane. If a switch is pressed on the plane, the key emits electromagnetic waves, w...

[Page 22] Mitsubishi Electric GRANDIS OXPE10E1

Electronic immobilizer (Anti-theft starting system) E00300201553 The electronic immobilizer is designed to signifi- cantly reduce the possibility of vehicle theft. The purpose of the system is to immobilize the vehicle if an invalid star...

[Page 23] Mitsubishi Electric GRANDIS OXPE10E1

Keyless entry system* E00300302115 Press the remote control switch, and all doors and the tailgate will be locked or unlocked as desired. It is also possible to operate the outside rear-view mir- rors. 1- LOCK switch 2- UNLOCK switch 3- Indication la...

[Page 24] Mitsubishi Electric GRANDIS OXPE10E1

l If you wish to add a remote control switch, we recommend you to contact your MITSUBISHI MOTORS Authorized Service Point. A maximum of 4 remote control switches are available for your vehicle. Procedure for replacing the remote control switc...

[Page 25] Mitsubishi Electric GRANDIS OXPE10E1

9. Check the keyless entry system to see that it works. NOTE l You may purchase a replacement battery at an electric appliance store. l A MITSUBISHI MOTORS Authorized Serv- ice Point can replace the battery for you if you prefer. CAUTIO...

[Page 26] Mitsubishi Electric GRANDIS OXPE10E1

To lock without using the key Front passenger’s door, Rear door Set the inside lock knob (1) to the locked position, and close the door (2). NOTE l The driver’s door cannot be locked using the inside lock knob while the driver’s door is ...

[Page 27] Mitsubishi Electric GRANDIS OXPE10E1

Child-protection rear doors E00300900915 1- Lock 2- Unlock Child protection helps prevent doors from being opened accidentally, especially when small chil- dren are in the rear seat. A lever is provided on each rear door. If the lever i...

[Page 28] Mitsubishi Electric GRANDIS OXPE10E1

To lock or unlock from inside the vehi- cle The tailgate can be locked or unlocked by using the inside lock knob (driver side), regardless of the po- sition of the ignition key. 1- Lock 2- Unlock If the tailgate is locked or unlocked by using the in-...

[Page 29] Mitsubishi Electric GRANDIS OXPE10E1

• Do not hold the gas struts when closing the tailgate. Also, do not push or pull the gas struts. • Do not attach any plastic material, tape, etc., to the gas struts. • Do not tie string, etc., around the gas struts. • Do not hang any ...

[Page 30] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l Always keep the release lever lid on tail- gate closed when driving so that your lug- gage cannot accidentally bump against the lever and open the tailgate. Electric window control E00302200042 The electric windows can only be operate...

[Page 31] Mitsubishi Electric GRANDIS OXPE10E1

Press the switch down for opening the window, and pull up the switch for closing it. Passenger’s switch NOTE l The rear door windows only open halfway. Lock switch E00303100338 When this switch is operated, the passenger’s switches...

[Page 32] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l The safety mechanism is cancelled just be- fore the window is fully closed. This al- lows the window to close completely. Therefore be especially careful that no fin- gers are trapped in the window. NOTE l The safety mechanism c...

[Page 33] Mitsubishi Electric GRANDIS OXPE10E1

NOTE l Be sure to tilt down the sunroof before clos- ing the sunshade. l The sunshade cannot be closed with the sun- roof opened. Do not attempt to close the sun- shade when the sunroof is opened. Rear sunroof The rear sunroof can only be operated wi...

[Page 34] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l The safety mechanism is cancelled just be- fore the sunroof is fully closed. This al- lows the sunroof to close completely. Therefore be especially careful that no fin- gers are trapped in the sunroof. NOTE l The sunroof stops jus...

[Page 35] Mitsubishi Electric GRANDIS OXPE10E1

...

[Page 36] Mitsubishi Electric GRANDIS OXPE10E1

Seat...............................................................................................2-02 Seat arrangement..........................................................................2-03 Seat adjustment.......................................

[Page 37] Mitsubishi Electric GRANDIS OXPE10E1

Seat E00400101449 6-person seat 7-person seat 1-Front seat l To adjust forward or backward ® p. 2-05 l To recline the seatback ® p. 2-06 l To adjust seat cushion height ® p. 2-06 l Armrest* ® p. 2-06 l Heated seats* ® p. 2-06 2- Second seat l ...

[Page 38] Mitsubishi Electric GRANDIS OXPE10E1

Seat arrangement E00400200645 By operating the seats, select the desired seats arrangement. 6 - person seat 7 - person seat Normal usage Flat seat With front and second seats ® p. 2-15 With second and third seats ® p. 2-16 Seat and seat belts 2-0...

[Page 39] Mitsubishi Electric GRANDIS OXPE10E1

6 - person seat 7 - person seat How to stow large articles Folding up the second seat cushion ® p. 2-09 Folding the third seatbacks forward ® p. 2-11 Stowing the third seat ® p. 2-13 Seat and seat belts 2-04 2 ...

[Page 40] Mitsubishi Electric GRANDIS OXPE10E1

Seat adjustment E00400300402 Adjust the driver’s seat so that you are comfortable and that you can reach the pedals, steering wheel, switches etc. while retaining a clear field of vision. WARNING l Do not attempt to adjust the seat while dri...

[Page 41] Mitsubishi Electric GRANDIS OXPE10E1

To recline the seatback E00400600610 In order to recline the seatback, lean forward slight- ly, pull the seatback lock lever up, and then lean backward to the desired position and release the lev- er. The seatback will lock in that position....

[Page 42] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l Operate in the high position for quick heat- ing. Once the seat is warm, set the heater to low to keep it warm. Slight variations in seat temperature may be felt while us- ing the heated seats. This is caused by the operation of the heat...

[Page 43] Mitsubishi Electric GRANDIS OXPE10E1

7-person seat WARNING l When a person is sitting in the middle seat- ing position of the second seat in a cabin with 7-person seats, the two sides of the second seat must have the same forward/ backward position and the same seatback angl...

[Page 44] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l Do not drive the vehicle with the seatback folded forward. The seat is not retained with the seatback in this position, so seri- ous injuries could be suffered in the event of hard braking or a collision. CAUTION l The reclining mech...

[Page 45] Mitsubishi Electric GRANDIS OXPE10E1

After making the adjustment, gently try to move it forward and backward to check that it is securely re- tained. 6-person seat 7-person seat NOTE l The seat can slide further forward only when the seat cushion is folded up. To adjust the seat cush...

[Page 46] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l The reclining mechanism of the seatback is spring loaded, causing it to return to the vertical position when the lock lever is operated. When using the lever, sit close to the seatback or hold it with your hand to contro...

[Page 47] Mitsubishi Electric GRANDIS OXPE10E1

To raise the head restraint, move it upward. To low- er the restraint, move it downward while pushing the height adjusting knob (A) in the direction of the arrow. After adjustment, push the head restraint downward and make sure that it i...

[Page 48] Mitsubishi Electric GRANDIS OXPE10E1

Making a luggage area E00403400039 WARNING l If required, always operate the seating be- fore the vehicle is in motion. l After seat operations are made, ensure the seating is locked in position by attempt- ing to move the seat and seatbac...

[Page 49] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l When stowing the seat, hold it with your hands and lower it slowly. Unless you hold the seat securely, it may suddenly tip under its own weight, trapping your hands. l Do not pull the belt while a person is sit- ting on the sea...

[Page 50] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l Do not jump on, or impact the seatbacks heavily. l To raise the seatback, sit on the seat and put a hand on the seatback and raise slow- ly. Never have a child do this operation, or an unexpected accident may result. With front and...

[Page 51] Mitsubishi Electric GRANDIS OXPE10E1

NOTE l The removed head restraints (A) can be fitted together and stored in the cargo net in the lug- gage area. (Refer to “Cargo net” on page 5-45.) With second and third seats E00404500024 NOTE l Retract the personal table to its origina...

[Page 52] Mitsubishi Electric GRANDIS OXPE10E1

5. Tip the seatbacks of the third seats back- ward. (Refer to “To recline the seatback” on page 2-10.) 6. Move the front seats backward until they touch the second seats. Lock them in that po- sition. The flat seat configuration is n...

[Page 53] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l No modifications or additions should be made by the user which will either pre- vent the seat belt adjusting devices from operating to remove slack, or prevent the seat belt assembly from being adjusted to remove slack. l To ...

[Page 54] Mitsubishi Electric GRANDIS OXPE10E1

Seat belt reminder/warning lamp E00409800774 A tone and warning lamp are used to remind the driver to fasten the seat belt. NOTE l For the front passenger seat, the warning func- tion works only while a person is sitting on the seat. When ...

[Page 55] Mitsubishi Electric GRANDIS OXPE10E1

After passing the belt through the rear notch (B), in- sert the plate into the front notch (C). Insert the third seat’s buckle into the pocket on the seat cushion. Pregnant women restraint E00405600123 WARNING l Seat belts work for everyone, i...

[Page 56] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l To obtain the best results from your pre- tensioner seat belt, make sure you have ad- justed your seat correctly and wear your seat belt properly. CAUTION l Installation of audio equipment or re- pairs in the vicinity of the pre...

[Page 57] Mitsubishi Electric GRANDIS OXPE10E1

Caution for installing the child re- straint on vehicles with a front passen- ger airbag The label shown here is attached on vehicles with a front passenger airbag. WARNING l Extreme Hazard! Do not use a rearward facing child re- straint on a ...

[Page 58] Mitsubishi Electric GRANDIS OXPE10E1

Instructions: l For small infants, an infant carrier should be used. For small children whose height when seated allows the shoulder belt to lie in con- tact with the face or the throat, a child seat should be used. l The child restraint system shoul...

[Page 59] Mitsubishi Electric GRANDIS OXPE10E1

Suitability for various seating positions E00406800799 6 - person seat Mass group Seating position Front passenger Rear outboard Intermediate Outboard Activated airbag Deactivated airbag* 1 Left side Right side 0 - Up to 10 kg (0-9 months) X X U U U ...

[Page 60] Mitsubishi Electric GRANDIS OXPE10E1

NOTE l The suitability table above applies to retention of child restraints using seat belts. l When MITSUBISHI MOTORS genuine part No. MZ313045 is used on the intermediate outboard seat, it can also be retained by means of ISOFIX child restraint mou...

[Page 61] Mitsubishi Electric GRANDIS OXPE10E1

L (Genuine part information) Genuine parts No. ECE No. * 2 MZ312807 E1-04301146 * 3 MZ312745 E1-04301136 MZ313045 E1-04301133 * 4 MZ312808 E1-04301148 NOTE l The suitability table above applies to retention of child restraints using seat belts. l W...

[Page 62] Mitsubishi Electric GRANDIS OXPE10E1

Installing a child restraint system to the lower anchorage (ISOFIX child re- straint mountings) E00408900042 Your vehicle’s second seat is fitted with lower an- chorages for attaching a child restraint system with ISOFIX mountings. 6-person seat 7...

[Page 63] Mitsubishi Electric GRANDIS OXPE10E1

2. Open the gap a little between the seat cush- ion (A) and the seatback (B) with your hand to locate the lower anchorages (C). 3. Push the child restraint system’s connectors into the lower anchorages (C) in accordance with the instructions provid...

[Page 64] Mitsubishi Electric GRANDIS OXPE10E1

Seat belt inspection E00406300550 l Check the belts for cuts, worn or frayed web- bing and for cracked or deformed metallic parts. Replace the belt assembly if it is defec- tive. l A dirty belt should be cleaned with neutral de- tergent in warm...

[Page 65] Mitsubishi Electric GRANDIS OXPE10E1

The SRS is NOT a substitute for the seat belts; for maximum protection in all types of crashes and ac- cidents, seat belts should ALWAYS be worn by ev- eryone who drives or rides in this vehicle. (With in- fants and small children in child restraints...

[Page 66] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l A REARWARD FACING CHILD RE- STRAINT must NOT be used in the front passenger seat if the front passenger’s air- bag has not been deactivated. The force of an inflating airbag could kill or cause serious injuries to the child...

[Page 67] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l Extreme Hazard! Do not use a rearward facing child re- straint on a seat protected by an airbag in front of it! How the Supplemental Restraint Sys- tem works E00407300935 The SRS includes the following components: 1. Airbag module (D...

[Page 68] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l If the SRS warning lamp comes on, we rec- ommend you to have the vehicle inspec- ted by a MITSUBISHI MOTORS Author- ized Service Point as soon as possible. l Please observe the following instructions to ensure that the driver�...

[Page 69] Mitsubishi Electric GRANDIS OXPE10E1

That airbag OFF indication lamp, with the word “OFF” (depending upon which airbag has been turned off) should illuminate. That will tell you that airbag is OFF, and will NOT deploy. (Refer to “Front passenger’s airbag OFF ...

[Page 70] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l If the indication lamp behaves in any of the following ways, there may be a fault in the airbag system. We recommend you to have the vehicle inspected by a MITSUBISHI MOTORS Authorized Service Point as soon as possible. �...

[Page 71] Mitsubishi Electric GRANDIS OXPE10E1

Head-on collision with a solid wall at speed of approximately 25 km/h (16 mph) or higher Moderate to severe frontal impact within the shaded area between the arrows The front airbags are designed to deploy when the vehicle suffers a moderate to seve...

[Page 72] Mitsubishi Electric GRANDIS OXPE10E1

Because the front airbags do not protect the occu- pant in all types of frontal collisions, be sure to al- ways properly wear your seat belts. Collision with a utility pole, tree or other narrow objects Vehicle slides under the rear body of a truck ...

[Page 73] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l Do not attach anything to the steering wheel padded cover, such as trim materi- al, badges, etc. It might strike and injure an occupant if the airbag inflates. l Do not set anything on, or attach any- thing to, the instrumen...

[Page 74] Mitsubishi Electric GRANDIS OXPE10E1

Deployment of side airbags and cur- tain airbags E00407701082 The side airbags and curtain airbags ARE DE- SIGNED TO DEPLOY when… The side airbags and curtain airbags are designed to deploy when the vehicle suffers a moderate to se- vere sid...

[Page 75] Mitsubishi Electric GRANDIS OXPE10E1

Oblique side impacts Vehicle rolls onto its side or roof The side airbags and curtain airbags ARE NOT DESIGNED TO DEPLOY when… The side airbags and curtain airbags are not de- signed to deploy in conditions where they cannot usually...

[Page 76] Mitsubishi Electric GRANDIS OXPE10E1

WARNING l Do not allow any second seat occupant to hold onto the seatback of either front seat, in order to reduce risk of injury from the deploying side airbags. Special care should be taken with children. l Do not place any object...

[Page 77] Mitsubishi Electric GRANDIS OXPE10E1

SRS warning lamp E00407800653 There is a Supplemental Restraint System (“SRS”) warning lamp on the instrument panel. The system checks itself and the lamp tells you if there is a prob- lem. When the ignition switch is turned to the “ON�...

[Page 78] Mitsubishi Electric GRANDIS OXPE10E1

Instruments...................................................................................3-02 Indication and warning lamps.......................................................3-05 Indication lamps..................................................

[Page 79] Mitsubishi Electric GRANDIS OXPE10E1

Instruments E00500100137 1- Tachometer 2- Speedometer 3- Water temperature gauge 4- Fuel gauge 5- Daytime dipper button 6- Odometer/Tripmeter 7- Tripmeter reset button Speedometer E00500200154 Indication for km/h The speedometer indicates the veh...

[Page 80] Mitsubishi Electric GRANDIS OXPE10E1

Odometer/Tripmeter E00500600897 When the ignition key is turned to the “ON” posi- tion, odometer and tripmeter indications are given. 1- Odometer 2- Tripmeter 3- Reset button Odometer The odometer indicates the total distance the vehi- cle has tr...

[Page 81] Mitsubishi Electric GRANDIS OXPE10E1

Low fuel warning lamp E00508100638 The warning lamp (A) illuminates when the fuel lev- el is getting low (approx. 10 litres) with the igni- tion switch in the “ON” position. Refuel as soon as possible. NOTE l On inclines or curves, due to the m...

[Page 82] Mitsubishi Electric GRANDIS OXPE10E1

Indication and warning lamps E00501501962 1- CRUISE indication lamp* ® p. 4-26 2- ASC indication lamp* ® p. 4-24 3- Turn-signal indication lamps/Hazard warning indication lamps ® p. 3-06 4- Rear fog lamp indication lamp ® p. 3-06 5- Front fog lam...

[Page 83] Mitsubishi Electric GRANDIS OXPE10E1

Indication lamps E00501600012 Turn-signal indication lamps/ Hazard warning indication lamps E00501700329 These indication lamps blink on and off when a turn-signal lamp is operating. NOTE l If the blinking is too fast, the cause may be a bl...

[Page 84] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION • The brake warning lamp does not illuminate when the parking brake is applied or does not turn off when the parking brake is re- leased. • The ABS warning lamp and brake warning lamp illumi- nate at the same time. For de...

[Page 85] Mitsubishi Electric GRANDIS OXPE10E1

Check engine warning lamp (diesel-powered vehicles) E00502600628 This lamp is a part of an onboard diag- nostic system which monitors the emis- sions control systems. If a problem is detected in one of these systems, this lamp illuminates. Althoug...

[Page 86] Mitsubishi Electric GRANDIS OXPE10E1

CAUTION l If you continue driving with low engine oil level or with this warning lamp illuminated, en- gine seizure may occur. NOTE l The oil pressure warning lamp should not be treated as an indica- tion of the engine’s oil level. The o...

[Page 87] Mitsubishi Electric GRANDIS OXPE10E1

A- Outside temperature ® p. 3-12 B- Driving information ® p. 3-13 C- Digital clock ® p. 3-10 NOTE l The display unit (ex. km or mile) and bright- ness can be changed as desired. (Refer to “Display brightness adjustment” on page 3-16...

[Page 88] Mitsubishi Electric GRANDIS OXPE10E1

2. Press the “MENU” button repeatedly to se- lect the CT (Clock Time) mode. The order is: AF → CT → REG → TP-S → PH → MUTE (With PH OFF, this mode is not displayed.) → Language of PTY display → Function setup mode OFF (Refer to...

[Page 89] Mitsubishi Electric GRANDIS OXPE10E1

Automatic mode (For vehicles with MITSUBISHI MOTORS genuine audio) The automatic adjustment mode can set the local time automatically by using the signal from local RDS stations. In this mode, CT (A) is shown in the display. Refer to ...

[Page 90] Mitsubishi Electric GRANDIS OXPE10E1

Driving information E00509000067 For vehicles with MITSUBISHI MOTORS genu- ine audio The momentary fuel consumption, average fuel con- sumption, driving range and average speed can be displayed. When the ignition switch is turned to the “ON” po- ...

[Page 91] Mitsubishi Electric GRANDIS OXPE10E1

1. Press and hold down button (A), then press the “SET” button (B) within 1 second, and a buzzer will sound and the reset mode will be changed. 2. The name of the newly selected mode will flash, then the display will return to its origi- n...

[Page 92] Mitsubishi Electric GRANDIS OXPE10E1

Driving range E00509400016 This value shows the distance (in km or miles) that can be driven on the fuel remaining in the fuel tank. NOTE l If the driving range drops below 50 km (30 miles) while the driving range is dis- played, the di...

[Page 93] Mitsubishi Electric GRANDIS OXPE10E1

Display brightness adjustment E00509600018 1. Press and hold down button (A), then press the “H” button (B) within 1 second. A buz- zer will sound, and the system will allow ad- justment of the display brightness. 2. Adjust the brightness by pr...

[Page 94] Mitsubishi Electric GRANDIS OXPE10E1

H - km M - mile 3. If the km unit was selected in step 2, the fuel consumption unit must be subsequently selec- ted using the “H” button (C) or “M” button (B). Use the “H” button (C) or “M” button (B) to select the desired fuel co...

[Page 95] Mitsubishi Electric GRANDIS OXPE10E1

l To cancel the unit setting procedure before completion, press the button (A). l The outside temperature and digital clock are not shown during the unit selecting procedure. l If the “SET” button is not pressed for about 15 seconds or longe...

[Page 96] Mitsubishi Electric GRANDIS OXPE10E1

l When the key has been turned to either the “LOCK” or “ACC” position or removed from the ignition switch with the lamp switch in the “ ” position, and the lamp switch is turned to the “OFF” position within ap...

[Page 97] Mitsubishi Electric GRANDIS OXPE10E1

●:1 person :Full luggage loading Switch position 0- Driver only/Driver + 1 front passenger Switch position 1- Driver + 1 front passenger + 2 third seat passengers Switch position 2- All passengers Switch position 3- All passengers + Full luggag...

[Page 98] Mitsubishi Electric GRANDIS OXPE10E1

Turn/Lane-change signals E00506501156 The turn-signal lamps flash when the switch is op- erated (with the ignition switch in the “ON” posi- tion). At the same time, the turn signal indicator flashes. 1- Turn-signals When making a norma...

[Page 99] Mitsubishi Electric GRANDIS OXPE10E1

l It is possible to cause a buzzer to sound in time with flashing of the turn-signal lamps. For further information, we recommend you to consult a MITSUBISHI MOTORS Author- ized Service Point. On a vehicle equipped with a Multi Display...

[Page 100] Mitsubishi Electric GRANDIS OXPE10E1

Wiper and washer switch E00507101162 The windscreen wiper and washer can be operated with the ignition switch in the “ON” or “ACC” po- sition. Move the switch to operate the windscreen wipers or spray the washer fluid. Windscreen wipers MIST-...