Panasonic KX-TG3651BX Operating Instructions Manual

[Page 1] Panasonic KX-TG3651BX

Thank you for purchasing a Panasonic digital cordless phone. This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company. Please read these operating instructions before us...

[Page 2] Panasonic KX-TG3651BX

Table of Contents 2 Introduction Accessory information. . . . . . . . . . . . . . . . . . . . . 3 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important safety instructions . . . . . . . . . . . . . . . . 5 For best performa...

[Page 3] Panasonic KX-TG3651BX

Introduction 3 Accessory information Supplied accessories *1 See page 3 for replacement battery information. *2 The handset cover comes attached to the handset. Additional/replacement accessories Please contact your nearest Panasonic dealer for sales...

[Page 4] Panasonic KX-TG3651BX

Introduction 4 For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection L Use only the power source marke...

[Page 5] Panasonic KX-TG3651BX

Introduction 5 Battery L We recommend using the batteries noted on page 3. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. L Do not mix old and new batteries. L Do not open or mutilate the batteries. Released electrolyte from the batteries i...

[Page 6] Panasonic KX-TG3651BX

Introduction 6 L Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care L Wipe the outer surface of the product with a soft moist cloth. L Do not use benzine, thinner, or any...

[Page 7] Panasonic KX-TG3651BX

Preparation 7 Controls Base unit A Corded handset B Receiver C {CLEAR} D {REDIAL} E {CALLER ID} F Display G {EXIT} H Navigator key ({^}/{V}/{<}/{>}) VOL. (Volume: {^}/{V}) I {LOCATOR} {INTERCOM} J Microphone K Speaker L Dial keypad ({*}: TONE) ...

[Page 8] Panasonic KX-TG3651BX

Preparation 8 Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<} , or {>}. To adjust the receiver or speaker volume, press {^} to increas...

[Page 9] Panasonic KX-TG3651BX

Preparation 9 *1 Caller ID subscribers only Handset display items The range status level The status of the radio between the base unit and the handset is displayed on the handset (Out of range and level 0-3). Important: L When w is not displayed, m...

[Page 10] Panasonic KX-TG3651BX

Preparation 10 Connections Connect the AC adaptor cord (A) by pressing the plug firmly (B). Connect the handset cord to the corded handset and the base unit (C). Connect the telephone line cord until it clicks into the base unit and telephone lin...

[Page 11] Panasonic KX-TG3651BX

Preparation 11 Battery installation and replacement Important: L Use the supplied rechargeable batteries. L When installing the batteries: – Wipe the battery ends (S , T ) with a dry cloth. – Avoid touching the battery ends (S, T) or the unit ...

[Page 12] Panasonic KX-TG3651BX

Preparation 12 Battery level Note: L The batteries need to be charged if: – “Recharge battery” or 4 displays on the handset display. – the handset beeps intermittently while it is in use. Panasonic Ni-MH battery performance (supplied batte...

[Page 13] Panasonic KX-TG3651BX

Preparation 13 L The date and time may be incorrect after a power failure. In this case, set the date and time again. TG3651BX(e).book Page 13 Monday, May 31, 2010 8:51 AM ...

[Page 14] Panasonic KX-TG3651BX

Making/Answering Calls 14 Making calls Using the base unit = 1 Dial the phone number. L To correct a digit, press {CLEAR}. 2 Lift the corded handset. 3 When you finish talking, place the corded handset on the cradle. Note: L You can also dial the ph...

[Page 15] Panasonic KX-TG3651BX

Making/Answering Calls 15 Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also nee...

[Page 16] Panasonic KX-TG3651BX

Making/Answering Calls 16 Temporary handset ringer off While the handset is ringing for a call, you can turn the ringer off temporarily by pressing {i}. Useful features during a call Hold This feature allows you to put an outside call on hold. Melo...

[Page 17] Panasonic KX-TG3651BX

Making/Answering Calls 17 Note: L Please contact your service provider/telephone company for details and availability of this service in your area. Temporary tone dialing (for rotary/pulse service users) You can temporarily switch the dialing mode...

[Page 18] Panasonic KX-TG3651BX

Phonebook 18 Handset phonebook The handset phonebook allows you to make calls without having to dial manually. You can add 100 names and phone numbers to the handset phonebook, and assign each handset phonebook entry to the desired group. Adding ...

[Page 19] Panasonic KX-TG3651BX

Phonebook 19 Searching by the group 1 n i {#} 2 Select the desired group by pressing {1} to {9}. 3 {V}/{^}: Select the desired entry. 4 {C} Editing entries 1 Find the desired entry (page 18). i ~ 2 Edit the name if necessary (16 characters max.; se...

[Page 20] Panasonic KX-TG3651BX

One-Touch Dial 20 One-Touch Dial The base unit has 5 one-touch dial buttons. You can make calls without having to dial manually by pressing the buttons. Assigning a phone number to an one-touch dial button Important: L Before storing phone numbers...

[Page 21] Panasonic KX-TG3651BX

Programming 21 Programmable settings You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods: – scrolling through the display menus (page 21) – using the direct commands (pag...

[Page 22] Panasonic KX-TG3651BX

Programming 22 Programming using the direct commands 1 ! i {#} 2 Enter the desired feature code. 3 Press {<} or {>} to select the desired setting. i I L This step may vary depending on the feature being programmed. L To exit the operation, pres...

[Page 23] Panasonic KX-TG3651BX

Programming 23 Special instructions for programmable settings Setting the selective ring/call block for specified phone number (individual call setting) (Caller ID subscribers only) This feature allows you to select which unit rings (Selective r...

[Page 24] Panasonic KX-TG3651BX

Programming 24 Night mode Night mode allows you to select a period of time during which all of the units will not ring for outside calls. This feature is useful for time period when you do not want to be disturbed, for example, while sleeping. Im...

[Page 25] Panasonic KX-TG3651BX

Caller ID Service 25 Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features, you must subscribe to Caller ID service. Contact your service provider/ telephone company for details. Caller ID features When a...

[Page 26] Panasonic KX-TG3651BX

Caller ID Service 26 Caller list Important: L Only 1 person can access the caller list at a time. L Make sure the unit’s date and time setting is correct (page 12). Viewing the caller list and calling back 1 {CALLER ID} 2 Press {V} to search fro...

[Page 27] Panasonic KX-TG3651BX

Caller ID Service 27 Storing caller information into the phonebook 1 {>} CALLER ID 2 {V}/{^}: Select the desired entry. i I 3 Press {;} to select “Phonebook”. 4 Enter the name if necessary. i I 5 Edit the phone number if necessary. i I 6 Sele...

[Page 28] Panasonic KX-TG3651BX

Intercom/Locator 28 Intercom Intercom calls can be made between the base unit and handset. Note: L If you receive an outside call while talking on the intercom, you hear ringer tones. Base unit: Selected ringer tone for outside call (page 15) Hand...

[Page 29] Panasonic KX-TG3651BX

Intercom/Locator 29 3 Proceed with the desired operation. ■ To complete the transfer: Press {SP-PHONE} or place the corded handset on the cradle. L The outside call is being routed to the handset. ■ To establish a conference call: Press {HOLD}....

[Page 30] Panasonic KX-TG3651BX

Useful Information 30 Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Cause/solution Already stored L The phone number has already been stored. Busy L The called unit is in use. L O...

[Page 31] Panasonic KX-TG3651BX

Useful Information 31 Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and t...

[Page 32] Panasonic KX-TG3651BX

Useful Information 32 Making/answering calls, intercom Caller ID Problem Cause/solution Noise is heard, sound cuts in and out. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use ...

[Page 33] Panasonic KX-TG3651BX

Useful Information 33 Liquid damage Caution: L To avoid permanent damage, do not use a microwave oven to speed up the drying process. Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the h...

[Page 34] Panasonic KX-TG3651BX

Index 34 Index A Answering calls: 15 Auto talk: 15 B Battery: 11 , 12 C Call block: 23 Caller ID service: 25 Caller list: 26 Caller list edit: 26 Call share: 17 Call waiting: 16 Chain dial: 19 Conference calls: 28 D Date and time: 12 Dialing mode...

[Page 35] Panasonic KX-TG3651BX

35 Notes TG3651BX(e).book Page 35 Monday, May 31, 2010 8:51 AM ...

[Page 36] Panasonic KX-TG3651BX

PNQX2099ZA CD0510DM0 Serial No. Date of purchase (found on the bottom of the base unit) Name and address of dealer Attach your purchase receipt here. For your future reference Copyright: This material is copyrighted by Panasonic System Networks Co.,...