ADC MM702G2-W V5.x User Manual

Download or browse on-line these Operation & User’s Manual for ADC MM702G2-W V5.x Modem.

ADC MM702G2-W V5.x Manual Information:

This manual for ADC MM702G2-W V5.x, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 208 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for ADC MM702G2-W V5.x. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] ADC MM702G2-W V5.x

Megabit Modem ® MM702G2-W V5.x User Manual Document Number: MM702G2-W-UM-03 Product Catalog: MM702G2-W ...

[Page 2] ADC MM702G2-W V5.x

REVISION HISTORY The Revision History provides a summary of any changes in this manual. Please make sure you are using the latest revision of this manual. April 14, 2006 This manual is available online at ADC’s website (www.adc.com/documentationlib...

[Page 3] ADC MM702G2-W V5.x

Table of Contents MM702G2-W-UM-03 iii Chapter 1: Installation .................................................................................................... 1-1 Overview .............................................................................

[Page 4] ADC MM702G2-W V5.x

Table of Contents iv MM702G2-W-UM-03 Delete a WAN Session ...........................................................................................................5-26 Edit a WAN Session ................................................................

[Page 5] ADC MM702G2-W V5.x

Table of Contents MM702G2-W-UM-03 v Ports ....................................................................................................................................... 6-58 Ethernet .............................................................

[Page 6] ADC MM702G2-W V5.x

Table of Contents vi MM702G2-W-UM-03 Page Intentionally Left Blank ...

[Page 7] ADC MM702G2-W V5.x

List of Figures MM702G2-W-UM-03 vii Figure 1-1. Remove the Modem ......................................................................................... 1-1 Figure 1-2. Set the MDI/MDI-X Switch .........................................................

[Page 8] ADC MM702G2-W V5.x

List of Figures viii MM702G2-W-UM-03 Figure 5-5. Edit IP Interface ................................................................................................ 5-5 Figure 5-6. Advanced ................................................................

[Page 9] ADC MM702G2-W V5.x

List of Figures MM702G2-W-UM-03 ix Figure 6-9. Add TCP or UDP Filter ................................................................................... 6-10 Figure 6-10.Add TCP or UDP Port Filter .......................................................

[Page 10] ADC MM702G2-W V5.x

List of Figures x MM702G2-W-UM-03 Figure 6-46.Create New Subnet ........................................................................................ 6-48 Figure 6-47.Create New Fixed Host .............................................................

[Page 11] ADC MM702G2-W V5.x

List of Tables MM702G2-W-UM-03 xi Table 1-1. Required Equipment ........................................................................................... 1-2 Table 1-2. LED Status Indicators ...........................................................

[Page 12] ADC MM702G2-W V5.x

List of Tables xii MM702G2-W-UM-03 Page Intentionally Left Blank ...

[Page 13] ADC MM702G2-W V5.x

MM702G2-W-UM-03 xiii ABOUT THIS MANUAL INTRODUCTION This manual applies to the ADC ® Megabit Modem ® version MM702G2-W. This modem can be used in two types of applications: • As an endpoint (CPE) to a DSLAM for Internet and other broadband conn...

[Page 14] ADC MM702G2-W V5.x

About This Manual xiv MM702G2-W-UM-03 INSPECTING YOUR SHIPMENT Upon receipt of the equipment: • Unpack each container and visually inspect the contents for signs of damage. If the equipment has been dam- aged in transit, immediately report the exte...

[Page 15] ADC MM702G2-W V5.x

MM702G2-W-UM-03 1-1 1 Chapter INSTALLATION OVERVIEW The MM702G2-W is a versatile, 1-pair/2-pair high-speed modem that connects an Ethernet LAN to one or more service providers using G.shdsl transmission technology in fixed and rate adaptive modes w...

[Page 16] ADC MM702G2-W V5.x

Chapter 1: Installation 1-2 MM702G2-W-UM-03 DETERMINE WHAT YOU NEED In addition to what is shipped with the modem, you need the following hardware and software to complete the installation and configuration. Table 1-1. Required Equipment Equipment R...

[Page 17] ADC MM702G2-W V5.x

Chapter 1: Installation MM702G2-W-UM-03 1-3 CONNECT CABLES Install cables for the Ethernet port (see “Connect the 10/100Base-T Port” below). Then check “LED Status Indications” on page 1-5. Connect the 10/100Base-T Port Set the modem MDI/MDI...

[Page 18] ADC MM702G2-W V5.x

Chapter 1: Installation 1-4 MM702G2-W-UM-03 2 Connect the cables to the modem rear panel as shown below in Figure 1-3: • Silver cable to the SHDSL line port and wall jack • Black Ethernet cable to the 10/100Base-T port and to another Ethernet dev...

[Page 19] ADC MM702G2-W V5.x

Chapter 1: Installation MM702G2-W-UM-03 1-5 LED STATUS INDICATIONS Table 1-2 summarizes the modem’s operational status as provided by the front panel LEDs. Table 1-2. LED Status Indicators LED State Description PWR On green Modem has power. Off Mod...

[Page 20] ADC MM702G2-W V5.x

Chapter 1: Installation 1-6 MM702G2-W-UM-03 Page Intentionally Left Blank ...

[Page 21] ADC MM702G2-W V5.x

MM702G2-W-UM-03 2-1 2 Chapter ACCESSING THE WEB INTERFACE FOR MODEM MANAGEMENT Use the Web interface to set up and manage the modem. This chapter provides steps to help you access the Web interface pages for configuration and management of the mode...

[Page 22] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management 2-2 MM702G2-W-UM-03 SET UP THE WEB BROWSER To access and view the modem Web pages, set up features for the Web browser. The Web browser must have cache settings enabled to allow the Web ...

[Page 23] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management MM702G2-W-UM-03 2-3 5 Click the Connections tab, then click LAN Settings to open the LAN Settings dialog (Figure 2-3). Figure 2-3. LAN Settings 6 In the Proxy Server section of the dialog, d...

[Page 24] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management 2-4 MM702G2-W-UM-03 ACCESSING THE MODEM WEB PAGES Use the following steps to access the login page, enter the Web interface, and navigate the Web pages. This login is for the system adminis...

[Page 25] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management MM702G2-W-UM-03 2-5 2 Enter the User Name and Password, then click OK. Figure 2-5. Enter User Name and Password The Operational Status page is displayed and functions as a home page with a m...

[Page 26] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management 2-6 MM702G2-W-UM-03 MENU STRUCTURE Figure 2-7, Figure 2-8, and Figure 2-9 show the menu structure of the terminal management system. Figure 2-7. Menu Structure - Part 1 Operational Status St...

[Page 27] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management MM702G2-W-UM-03 2-7 Figure 2-8. Menu Structure - Part 2 Description Edit Service Edit Edit RFC 1483 Encapsulation Edit ATM Channel VPI VCI PCR ATM QOS Burst Tolerance Max Cell Rate Max Burs...

[Page 28] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management 2-8 MM702G2-W-UM-03 Figure 2-9. Menu Structure - Part 3 Advance Configuration MM702G2-W Security Security State Policies, Triggers, Intrusion Detection, Logging Port Filter Source Address (I...

[Page 29] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management MM702G2-W-UM-03 2-9 Figure 2-10. Menu Structure - Part 4 ZIPB Advance Configuration MM702G2-W LAN Interface WAN Interface LAN IP Address Spoof Method Manual LAN IP Address LAN Subnet Mask Se...

[Page 30] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management 2-10 MM702G2-W-UM-03 Figure 2-11. Menu Structure - Part 5 Advance Configuration MM702G2-W Bridge Global Setting Bridge MAC Address Numbers of Ports Bridge Type Unicast Learning Multicast Lea...

[Page 31] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management MM702G2-W-UM-03 2-11 Figure 2-12. Menu Structure - Part 6 Advance Configuration MM702G2-W Bridge Spanning Priority Forward Delay Hello Time Maximum Age Spanning Tree Unicast Destination MAC...

[Page 32] ADC MM702G2-W V5.x

Chapter 2: Accessing the Web Interface for Modem Management 2-12 MM702G2-W-UM-03 Figure 2-13. Menu Structure - Part 7 Advance Configuration MM702G2-W Ports Auto Negotiation Speed Mode Ethernet SHDSL Admin State Admin State Mode Annex Type Bit Rate Mo...

[Page 33] ADC MM702G2-W V5.x

MM702G2-W-UM-03 3-1 3 Chapter VIEW STATUS PARAMETERS Status provides an overall management view of the modem configuration and performance. The system information page, which also functions as the Web interface home page, provides a management view...

[Page 34] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-2 MM702G2-W-UM-03 2 View the Status as described below: • Local IP Address – Identifies the Local IP Address. • Port Connection Status – Includes status on type, whether connected and line state of the Ethe...

[Page 35] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-3 VIEW SYSTEM INFORMATION Step Action 1Select Status|System Information to access the System Information page (Figure 3-2). Figure 3-2. System Information 2 View the System Information as described ...

[Page 36] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-4 MM702G2-W-UM-03 Statistics View Routing Table Step Action 1Select Status|Statistics|Routing Table to access the Routing Table page (Figure 3-3). Figure 3-3. Routing Table 2 View the Routing Table for the followin...

[Page 37] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-5 View ARP Table Step Action 1Select Status|Statistics|ARP Table to access the Address Resolution Protocol (ARP) Table page (Figure 3-4). Figure 3-4. ARP Table 2 View the ARP Table for the followin...

[Page 38] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-6 MM702G2-W-UM-03 View Bridge Interfaces Step Action 1Select Status|Statistics|Bridge Interfaces to access the Bridge Interfaces page (Figure 3-5). Figure 3-5. Bridge Interfaces ...

[Page 39] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-7 2 NOTE: With each interface, there are two links provided (Clear and Flush) for Clearing statistics and Flushing the dynamic entries for the interface respectively. View the Bridge Interfaces for...

[Page 40] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-8 MM702G2-W-UM-03 View VLAN Port Statistics Step Action 1Select Status|Statistics|VLAN Port Statistics to access the VLAN Port Statistics page (Figure 3-6). Figure 3-6. VLAN Port Statistics 2 View the VLAN Port Tab...

[Page 41] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-9 View Ethernet Statistics Step Action 1Select Status|Statistics|Ethernet Statistics to access the Ethernet Statistics page (Figure 3-7). Figure 3-7. Ethernet Statistics ...

[Page 42] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-10 MM702G2-W-UM-03 2 View the Ethernet Statistics as described below: •Port Name – Name assigned to this Port (Ethernet). • Connected – Values are True and False. • Rx Packets – The total number of pack...

[Page 43] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-11 View ATM Statistics Step Action 1Select Status|Statistics|ATM Statistics to access the ATM Statistics page (Figure 3-8). Figure 3-8. ATM Statistics ...

[Page 44] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-12 MM702G2-W-UM-03 2 View the ATM Statistics for the following information: •Port Name – Name assigned to this Port (SHDSL). • Rx VPI – Received VPIs. Values range from 0-4095. •Rx VCI – Received VCIs. ...

[Page 45] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-13 View SHDSL Statistics Step Action 1Select Status|Statistics|SHDSL Statistics|SHDSL to access the SHDSL page (Figure 3-9). Figure 3-9. SHDSL Statistics 2 View the current SHDSL Line status for the...

[Page 46] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-14 MM702G2-W-UM-03 View SHDSL Errors Step Action 1Select Status|Statistics|SHDSL Statistics|Errors to access the SHDSL Errors page (Figure 3-10). Figure 3-10. SHDSL Errors ...

[Page 47] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters MM702G2-W-UM-03 3-15 2 View the SHDSL page for the following information: • SHDSL Errors – Error LOSW Indicates the total number of loss of sync word (LOSW) defects that have occurred since the last time that th...

[Page 48] ADC MM702G2-W V5.x

Chapter 3: View Status Parameters 3-16 MM702G2-W-UM-03 Page Intentionally Left Blank ...

[Page 49] ADC MM702G2-W V5.x

MM702G2-W-UM-03 4-1 4 Chapter VIEW AND CONFIGURE SYSTEM PARAMETERS The information covered is: Save Configuration, Configure User Administration parameters, Retrieve Event Log information, and Configure SNTP parameters. SAVE CONFIGURATION CHANGES U...

[Page 50] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters 4-2 MM702G2-W-UM-03 2 Do one of the following: a. To confirm that you want to save the changes, click Save (Figure 4-1 on page 4-1). Confirming save will write the configuration to flash memory. Do not...

[Page 51] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters MM702G2-W-UM-03 4-3 CONFIGURE USER ADMINISTRATION Assigning and Editing User Access The modem provides secure access for managing and viewing modem configuration. Three levels of access are predefined ...

[Page 52] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters 4-4 MM702G2-W-UM-03 Step Action 2 To add a new user account, do the following: a. Click Create a new user (Figure 4-3 on page 4-3). Figure 4-4 is displayed. Figure 4-4. Add New User b. Enter the followi...

[Page 53] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters MM702G2-W-UM-03 4-5 Step Action 2 (cont.) c. Click Create. The new entry is now viewable from the Users’ List table (Figure 4-3 on page 4-3). 3 To modify or delete an existing user entry, do the follo...

[Page 54] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters 4-6 MM702G2-W-UM-03 VIEW EVENT LOGS Step Action 1Select System|Event Log to access the Event Log page (Figure 4-6). Figure 4-6. All Event Logs 2 Press the arrow beside Select a Log to view the following...

[Page 55] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters MM702G2-W-UM-03 4-7 CONFIGURE SNTP CLIENT Step Action 1Select System|SNTP Client to access the Simple Network Time Protocol (SNTP) Client page (Figure 4-7). Figure 4-7. SNTP 2 Configure the SNTP parame...

[Page 56] ADC MM702G2-W V5.x

Chapter 4: View and Configure System Parameters 4-8 MM702G2-W-UM-03 Page Intentionally Left Blank ...

[Page 57] ADC MM702G2-W V5.x

MM702G2-W-UM-03 5-1 5 Chapter CONFIGURE LAN, WAN, AND SHDSL LAN CONNECTIONS The LAN configuration sets up the interface between the modem 10/100Base-T LAN port and devices on the LAN. The LAN is managed by your network administrator, who will make ...

[Page 58] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-2 MM702G2-W-UM-03 2 The default LAN IP interface is iplan. To change the IP address for the LAN Port, click on Change LAN Port IP Address from the LAN Connections page. Figure 5-2 is displayed. Figure 5-2. ...

[Page 59] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-3 3 Configure the following parameters: Primary IP Address • IP Address See the LAN administrator for a LAN IP address. – Enter an IP address for the LAN (10/100Base-T) port provided by ...

[Page 60] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-4 MM702G2-W-UM-03 EDIT A LAN To edit the IP Interface, TCP MSS Clamp, RIP Versions or NAT, refer to the following procedures: • Edit LAN Protocol on page 4-5 • Edit TCP MSS Clamp on page 4-7 • Edit RIP...

[Page 61] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-5 Edit LAN Protocol Step Action 1Select Configuration|LAN Connections|Change LAN Port IP Address to access the LAN Port page (Figure 5-4). Figure 5-4. Advanced 2 Click Advanced (Figure 5-4)....

[Page 62] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-6 MM702G2-W-UM-03 3 Edit the following parameters (as appropriate): • IP Address See the LAN administrator for a LAN IP address. Do one of the following, then click Apply: – Enter an IP address for the L...

[Page 63] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-7 Edit TCP MSS Clamp Step Action 1Select Configuration|LAN Connections|Change LAN Port IP Address to access the LAN Port page (Figure 5-6). Figure 5-6. Advanced 2 Click Advanced (Figure 5-6)...

[Page 64] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-8 MM702G2-W-UM-03 Step Action 3 Edit the following parameter (as appropriate): • TCP MSS Clamp Valid values are True or False. Default is False. Problem When using the PPPoE Client for an Internet connecti...

[Page 65] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-9 Edit RIP Versions Step Action 1Select Configuration|LAN Connections|Change LAN Port IP Address to access the LAN Port page (Figure 5-8). Figure 5-8. Advanced 2 Click Advanced (Figure 5-8)....

[Page 66] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-10 MM702G2-W-UM-03 Step Action 3 Edit the following parameters (as appropriate): • Accept V1 Valid values are True or False. Default is False. • Accept V2 Valid values are True or False. Default is False...

[Page 67] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-11 Edit NAT NAT provides the ability to map private IP address on the LAN to public IP addresses (WAN) that are assigned to each session. This essentially hides the private IP addresses behi...

[Page 68] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-12 MM702G2-W-UM-03 2 Click Advanced (Figure 5-10). Figure 5-11 is displayed. Figure 5-11. Edit NAT Step Action ...

[Page 69] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-13 Step Action 3 Edit the following parameter (as appropriate): •NAT Enabled Valid values are True or False. Default is False. 4 Click Change to change the parameters or click Reset to keep...

[Page 70] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-14 MM702G2-W-UM-03 CONFIGURING THE WAN The WAN configuration sets up from 1 to 8 sessions between the modem and the service provider or between two G.shdsl modems (refer to “Implementing a Point-To-Point ...

[Page 71] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-15 CONFIGURE A NEW WAN SESSION You can configure up to 8 total PPPoA, PPPoE, 1483-Bridge, and 1483-Router sessions for the modem. From the WAN configuration page (Figure 5-12), define the pa...

[Page 72] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-16 MM702G2-W-UM-03 Set Up an RFC 1483 Bridged Session Step Action 1Select Configuration|WAN|Create a new service to access the WAN Connection: Create Service page. Click on RFC 1483 Bridged (Figure 5-13). F...

[Page 73] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-17 Step Action 3 Configure the following parameters for each session: • Session Name Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters. ...

[Page 74] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-18 MM702G2-W-UM-03 Set Up an RFC 1483 Routed Step Action 1Select Configuration|WAN|Create a new service to access the WAN Connection: Create Service page. Click on RFC 1483 Routed (Figure 5-15). Figure 5-15...

[Page 75] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-19 3 Configure the following parameters for each session: • Session Name Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters. • Virtual ...

[Page 76] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-20 MM702G2-W-UM-03 Set Up a PPPoA Routed Step Action 1Select Configuration|WAN|Create a new service to access the WAN Connection: Create Service page. Click on PPPoA Routed (Figure 5-17). Figure 5-17. Selec...

[Page 77] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-21 Step Action 3 Configure the following parameters for each session: • Session Name Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters. ...

[Page 78] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-22 MM702G2-W-UM-03 Set Up a PPPoE Routed Step Action 1Select Configuration|WAN|Create a new service to access the WAN Connection: Create Service page. Click on PPPoE Routed (Figure 5-19). Figure 5-19. Selec...

[Page 79] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-23 Step Action 3 Configure the following parameters for each session: • Session Name Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters. ...

[Page 80] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-24 MM702G2-W-UM-03 Set Up a IPoA Routed Step Action 1Select Configuration|WAN|Create a new service to access the WAN Connection: Create Service page. Click on IPoA Routed (Figure 5-21). Figure 5-21. Select ...

[Page 81] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-25 Step Action 3 Configure the following parameters for each session: • Session Name Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters. ...

[Page 82] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-26 MM702G2-W-UM-03 Permanently Save Sessions After you have set up all the WAN sessions, save these changes permanently, as described in Save Configuration Changes on page 4-1. DELETE A WAN SESSION To Delet...

[Page 83] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-27 Edit Service Step Action 1Select Configuration|WAN to access the WAN Configuration page (Figure 5-23). Figure 5-23. WAN Configuration ...

[Page 84] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-28 MM702G2-W-UM-03 2 Click Edit (Figure 5-23). Figure 5-24 is displayed. Figure 5-24. Edit Service 3 Edit the following parameter (as appropriate): • Description Enter a unique, descriptive identifier as...

[Page 85] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-29 Edit RFC1483 Step Action 1Select Configuration|WAN to access the WAN Configuration page (Figure 5-25). Figure 5-25. WAN Configuration ...

[Page 86] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-30 MM702G2-W-UM-03 2 Click Edit (Figure 5-25). Figure 5-26 is displayed. Click Edit RFC1483. Figure 5-26. Edit RFC1483 3 Edit the following parameter (as appropriate): • LlcBridged Logical Link Control al...

[Page 87] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-31 Edit ATM Channel Step Action 1Select Configuration|WAN to access the WAN Configuration page (Figure 5-27). Figure 5-27. WAN Configuration ...

[Page 88] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-32 MM702G2-W-UM-03 2 Click Edit (Figure 5-27). Figure 5-28 is displayed. Click Edit ATM Channel. Figure 5-28. Edit ATM Channel Step Action ...

[Page 89] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-33 3 Edit the following parameter (as appropriate): • VPI Enter the value (from 0 to 4,095) provided by the service provider. The number identifies the virtual path that transports ATM cell...

[Page 90] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-34 MM702G2-W-UM-03 Edit Bridge Interface Step Action 1Select Configuration|WAN to access the WAN Configuration page (Figure 5-29). Figure 5-29. WAN Configuration ...

[Page 91] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-35 2 Click Edit (Figure 5-29). Figure 5-30 is displayed. Click Edit Bridge Interface. Figure 5-30. Edit Bridge Interface Step Action ...

[Page 92] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-36 MM702G2-W-UM-03 3 Edit the following parameter (as appropriate): • Leave Mode Valid values are Normal and Fast. Default is Normal. • IGMP Port State Valid values are Disable, Enable and Drop. Default ...

[Page 93] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-37 Edit Spanning Bridge Interface Step Action 1Select Configuration|WAN to access the WAN Configuration page (Figure 5-31). Figure 5-31. WAN Configuration ...

[Page 94] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-38 MM702G2-W-UM-03 2 Click Edit (Figure 5-31). Figure 5-32 is displayed. Click Edit Spanning Bridge Interface. Figure 5-32. Edit Spanning Bridge Interface 3 Edit the following parameter (as appropriate): �...

[Page 95] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-39 CONFIGURE A SHDSL PORT CONFIGURATION The SHDSL parameters set up the G.shdsl communication between the modem and a DSLAM or between two modems used in a point-to-point application. Typica...

[Page 96] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-40 MM702G2-W-UM-03 Step Action 1 Select Configuration|SHDSL to access the SHDSL Port Configuration page (Figure 5-33). Figure 5-33. SHDSL Port Configuration 2 Configure the Admin State parameter (Figure 5-33...

[Page 97] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL MM702G2-W-UM-03 5-41 4 Configure the following parameters: • Mode The four mode options are: CPE-2Wire, CPE-GS4Wire, CO-2Wire, and CO-GS4Wire. For 2-wire, default is CPE-2Wire. For 4-wire, default is CPE-GS...

[Page 98] ADC MM702G2-W V5.x

Chapter 5: Configure LAN, WAN, and SHDSL 5-42 MM702G2-W-UM-03 4 (cont) • PSD Mode The Power Spectral Density (PSD) plots the variations of signal power with signal frequency for the G.shdsl transmission between the modem and the DSLAM or the mode...

[Page 99] ADC MM702G2-W V5.x

MM702G2-W-UM-03 6-1 6 Chapter CONFIGURING ADVANCED FEATURES These configuration parameters affect system functions for the modem. Other system parameters used to manage or troubleshoot the modem (updating modem software, for example) are at the end...

[Page 100] ADC MM702G2-W V5.x

Chapter 6: Configuring Advanced Features 6-2 MM702G2-W-UM-03 Step Action 1Select Configuration|Advance|Default Gateway on the menu bar to access the Default Gateway page (Figure 6-1). Figure 6-1. Default Gateway 2 To add a default gateway, enter the...