Siemens ET 200SP Operating Instructions Manual

Download or browse on-line these Operating Instructions Manual for Siemens ET 200SP Adapter, Controller.

Siemens ET 200SP Manual Information:

This manual for Siemens ET 200SP, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 122 pages, and the size of the file at download is . The document type is Operating Instructions Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Siemens ET 200SP. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Siemens ET 200SP

___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ _...

[Page 2] Siemens ET 200SP

Siemens AG Division Process Industries and Drives Postfach 48 48 90026 NÜRNBERG GERMANY C79000-G8976-C426-02 Ⓟ 01/2017 Subject to change Copyright © Siemens AG 2016. All rights reserved Legal information Wa...

[Page 3] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 3 Preface Validity of this manual This document contains information on the following modules: ● CP 1542SP-1 Article number 6GK7...

[Page 4] Siemens ET 200SP

Preface CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 4 Operating Instructions, 01/2017, C79000-G8976-C426-03 Directly below, you will find the firmware version of the CP as it shipped. The MAV address is printed on the front at the bottom lef...

[Page 5] Siemens ET 200SP

Preface CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 5 Current manual release on the Internet You will also find the current version of this manual on the Internet pages of Siemens Indust...

[Page 6] Siemens ET 200SP

Preface CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 6 Operating Instructions, 01/2017, C79000-G8976-C426-03 always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may...

[Page 7] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 7 Table of contents Preface .................................................................................................................

[Page 8] Siemens ET 200SP

Table of contents CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 8 Operating Instructions, 01/2017, C79000-G8976-C426-03 4.5.2 Communication types ....................................................................................................

[Page 9] Siemens ET 200SP

Table of contents CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 9 A Approvals ...................................................................................................................

[Page 10] Siemens ET 200SP

Table of contents CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 10 Operating Instructions, 01/2017, C79000-G8976-C426-03 ...

[Page 11] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 11 Application and functions 1 1.1 Components of the product The following components are supplied with the product: ● CP 154xSP-1 ...

[Page 12] Siemens ET 200SP

Application and functions 1.3 Communications services CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 12 Operating Instructions, 01/2017, C79000-G8976-C426-03 1.3 Communications services Communications services The following communications...

[Page 13] Siemens ET 200SP

Application and functions 1.4 Telecontrol communication of the CP 1542SP-1 IRC CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 13 1.4 Telecontrol communication of the CP 1542SP-1 IRC Tele...

[Page 14] Siemens ET 200SP

Application and functions 1.5 Other services and properties CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 14 Operating Instructions, 01/2017, C79000-G8976-C426-03 – SIMATIC WinCC OA – Third-party systems that support the DNP3 specificatio...

[Page 15] Siemens ET 200SP

Application and functions 1.6 Security functions (CP 1542SP-1 IRC, CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 15 – Only CP 1542SP-1 IRC When telecontrol communication is e...

[Page 16] Siemens ET 200SP

Application and functions 1.6 Security functions (CP 1542SP-1 IRC, CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 16 Operating Instructions, 01/2017, C79000-G8976-C426-03 ● Secure telecontrol communication The telecontrol prot...

[Page 17] Siemens ET 200SP

Application and functions 1.7 Configuration limits and performance data CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 17 ● SNMPv3 For secure transmission of network analysis informatio...

[Page 18] Siemens ET 200SP

Application and functions 1.7 Configuration limits and performance data CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 18 Operating Instructions, 01/2017, C79000-G8976-C426-03 The size of the send buffer can be configured in STEP 7, refer to the ...

[Page 19] Siemens ET 200SP

Application and functions 1.8 Requirements for use CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 19 Security functions Only CP 1543SP-1 ● VPN tunnel A maximum of four VPN tunnels c...

[Page 20] Siemens ET 200SP

Application and functions 1.9 Configuration examples CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 20 Operating Instructions, 01/2017, C79000-G8976-C426-03 ● CPU 1512SP F-1 PN Article number: 6ES7512-1SK01-0AB0 Further parts and modules tha...

[Page 21] Siemens ET 200SP

Application and functions 1.9 Configuration examples CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 21 Figure 1-1 Configuration example of an ET 200SP with CP 1542SP-1 CP 1543SP-1 - Cell ...

[Page 22] Siemens ET 200SP

Application and functions 1.9 Configuration examples CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 22 Operating Instructions, 01/2017, C79000-G8976-C426-03 CP 1542SP-1 IRC - Connection to control centers By using the CP the ET 200SP can be us...

[Page 23] Siemens ET 200SP

Application and functions 1.9 Configuration examples CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 23 Figure 1-4 Configuration example of an ET 200SP with CP 1542SP-1 IRC; protocol: DNP3 o...

[Page 24] Siemens ET 200SP

Application and functions 1.9 Configuration examples CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 24 Operating Instructions, 01/2017, C79000-G8976-C426-03 ...

[Page 25] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 25 LEDs and connectors 2 2.1 LEDs Meaning of the LED displays of the CP The CP has the following light emitting diodes (LEDs) on the fr...

[Page 26] Siemens ET 200SP

LEDs and connectors 2.2 Power supply CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 26 Operating Instructions, 01/2017, C79000-G8976-C426-03 LEDs of the bus adapter Every port of a bus adapter has an LED "LKx" that informs about the ...

[Page 27] Siemens ET 200SP

LEDs and connectors 2.3 Connector for the BusAdapter CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 27 Reverse polarity protection The plug-in terminal block for connector X80 is designed s...

[Page 28] Siemens ET 200SP

LEDs and connectors 2.3 Connector for the BusAdapter CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 28 Operating Instructions, 01/2017, C79000-G8976-C426-03 ...

[Page 29] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 29 Installation and connecting up 3 3.1 Important notes on using the device Safety notices on the use of the device Note the following ...

[Page 30] Siemens ET 200SP

Installation and connecting up 3.1 Important notes on using the device CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 30 Operating Instructions, 01/2017, C79000-G8976-C426-03 WARNING The equipment is designed for operation with Safety Ex...

[Page 31] Siemens ET 200SP

Installation and connecting up 3.1 Important notes on using the device CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 31 3.1.2 Notes on use in hazardous areas according to ATEX / IECEx ...

[Page 32] Siemens ET 200SP

Installation and connecting up 3.2 Installing the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 32 Operating Instructions, 01/2017, C79000-G8976-C426-03 3.1.4 General notices on use in hazardous areas according to FM WARNING EX...

[Page 33] Siemens ET 200SP

Installation and connecting up 3.2 Installing the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 33 NOTICE Installation location - Dependency of the temperature range The module must...

[Page 34] Siemens ET 200SP

Installation and connecting up 3.2 Installing the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 34 Operating Instructions, 01/2017, C79000-G8976-C426-03 Slot 1 - only permitted for the CPU. Slot 2 - for CM / CP / BusAdapter Send * ...

[Page 35] Siemens ET 200SP

Installation and connecting up 3.2 Installing the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 35 The ET 200SP system is suitable for installation on a mounting rail according to EN 60715...

[Page 36] Siemens ET 200SP

Installation and connecting up 3.3 Connecting the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 36 Operating Instructions, 01/2017, C79000-G8976-C426-03 4. Plug the connector of the connecting cable into the socket of the bus adapter if you ...

[Page 37] Siemens ET 200SP

Installation and connecting up 3.3 Connecting the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 37 The 2-terminal plug-in terminal block has the following pin assignment for the socket: ...

[Page 38] Siemens ET 200SP

Installation and connecting up 3.3 Connecting the CP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 38 Operating Instructions, 01/2017, C79000-G8976-C426-03 ...

[Page 39] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 39 Configuration and operation 4 4.1 Security recommendations Keep to the following Security recommendations to prevent unauthorized acc...

[Page 40] Siemens ET 200SP

Configuration and operation 4.1 Security recommendations CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 40 Operating Instructions, 01/2017, C79000-G8976-C426-03 Network attachment Do not connect the PC directly to the Internet. If a connection...

[Page 41] Siemens ET 200SP

Configuration and operation 4.1 Security recommendations CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 41 ● Make sure that all passwords are protected and inaccessible to unauthorized pers...

[Page 42] Siemens ET 200SP

Configuration and operation 4.2 Configuration in STEP 7 CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 42 Operating Instructions, 01/2017, C79000-G8976-C426-03 Protocol / function Port number (pro- tocol) Default of the port Port status ...

[Page 43] Siemens ET 200SP

Configuration and operation 4.3 Ethernet interface CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 43 7. Optional: Create the program blocks for the Open User Communication. 8. Save and comp...

[Page 44] Siemens ET 200SP

Configuration and operation 4.3 Ethernet interface CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 44 Operating Instructions, 01/2017, C79000-G8976-C426-03 Note No forwarding of the time of day with NTP / NTP (secure) Both the CPU and CP can ...

[Page 45] Siemens ET 200SP

Configuration and operation 4.4 SNMP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 45 4.4 SNMP "SNMP" parameter group ● " Enable SNMP " parameter group Relea...

[Page 46] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 46 Operating Instructions, 01/2017, C79000-G8976-C426-03 4.5.2 Communication types In this parameter group, you enab...

[Page 47] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 47 ● Activate online functions Enables access to the CPU for t...

[Page 48] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 48 Operating Instructions, 01/2017, C79000-G8976-C426-03 Address information required by the CP You will find informatio...

[Page 49] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 49 Transmission settings - TeleControl Basic ● Connection esta...

[Page 50] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 50 Operating Instructions, 01/2017, C79000-G8976-C426-03 ● Buffer for class 1 / 2 / 3 events Here, for each of the ...

[Page 51] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 51 ● Monitoring time for S and U frames (t 2 ) Monitoring ti...

[Page 52] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 52 Operating Instructions, 01/2017, C79000-G8976-C426-03 Port [X1 Px] If you do not want to use both ports of the bus ad...

[Page 53] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 53 ● Partner number The partner number is always signed by STE...

[Page 54] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 54 Operating Instructions, 01/2017, C79000-G8976-C426-03 ● Connection establishment Specifies the communications par...

[Page 55] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 55 4.5.5.2 Addressing of single and redundant communications par...

[Page 56] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 56 Operating Instructions, 01/2017, C79000-G8976-C426-03 Project Here, enter the project number of the CP in the partner...

[Page 57] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 57 The fourth parameter "Frame memory size" decides the siz...

[Page 58] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 58 Operating Instructions, 01/2017, C79000-G8976-C426-03 Figure 4-1 Open the data point and message editor Open the dat...

[Page 59] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 59 Properties of the data points All PLC tags intended to be used ...

[Page 60] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 60 Operating Instructions, 01/2017, C79000-G8976-C426-03 Format (memory re- quirements) Data point type S7 data types ...

[Page 61] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 61 Format (memory requirements) Data point type DNP3 object gro...

[Page 62] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 62 Operating Instructions, 01/2017, C79000-G8976-C426-03 Assign each data point on the master using the configurable data p...

[Page 63] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 63 Format (memory requirements) Data point type IEC type Dire...

[Page 64] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 64 Operating Instructions, 01/2017, C79000-G8976-C426-03 Data points are configured as a static value or as an event using ...

[Page 65] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 65 ● TeleControl Basic The forced image mode If the send buffer ...

[Page 66] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 66 Operating Instructions, 01/2017, C79000-G8976-C426-03 ● DNP3 The evaluation of the following classification must ...

[Page 67] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 67 ● Event trigger The value of the data point is transferred ...

[Page 68] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 68 Operating Instructions, 01/2017, C79000-G8976-C426-03 Status IDs - TeleControl Basic The status bits are converted to...

[Page 69] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 69 Status IDs - IEC The status IDs can be evaluated by the master....

[Page 70] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 70 Operating Instructions, 01/2017, C79000-G8976-C426-03 DNP3 On a CP, data point indexes must be unique within each of ...

[Page 71] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 71 ● Low priority read jobs Some of the values of input data p...

[Page 72] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 72 Operating Instructions, 01/2017, C79000-G8976-C426-03 ● Event trigger (Trigger tag) The value of the data point i...

[Page 73] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 73 4.5.7.8 Threshold value trigger Note Threshold value...

[Page 74] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 74 Operating Instructions, 01/2017, C79000-G8976-C426-03 Integrative method The integration threshold value calculation ...

[Page 75] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 75 Requirements and restrictions You will find the requirements fo...

[Page 76] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 76 Operating Instructions, 01/2017, C79000-G8976-C426-03 Sequence of the analog value preprocessing options The values o...

[Page 77] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 77 The 500 millisecond cycle is started by the integrative threshold ...

[Page 78] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 78 Operating Instructions, 01/2017, C79000-G8976-C426-03 The calculation of a new mean value is then started. If the analog...

[Page 79] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 79 Input modules The suppression is adjusted to analog values that...

[Page 80] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 80 Operating Instructions, 01/2017, C79000-G8976-C426-03 Set limit value 'low' / Set limit value 'high&apos...

[Page 81] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 81 Range Raw value (16 bits) of the PLC tag Module output [mA] ...

[Page 82] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 82 Operating Instructions, 01/2017, C79000-G8976-C426-03 Requirements and necessary information Remember the following r...

[Page 83] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 83 Enable identifier for processing status If this option is enabl...

[Page 84] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 84 Operating Instructions, 01/2017, C79000-G8976-C426-03 DNP3 security options ● Enable DNP3 security options Met...

[Page 85] Siemens ET 200SP

Configuration and operation 4.5 Telecontrol communication (CP 1542SP-1 IRC) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 85 ● Key length Length of the pre-shared key in bytes The fol...

[Page 86] Siemens ET 200SP

Configuration and operation 4.6 Security configuration(CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 86 Operating Instructions, 01/2017, C79000-G8976-C426-03 4.5.11 Security > E-mail configuration E-mail configuration ●...

[Page 87] Siemens ET 200SP

Configuration and operation 4.6 Security configuration(CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 87 Properties ● VPN forms a logical subnet that is embedded in a neighb...

[Page 88] Siemens ET 200SP

Configuration and operation 4.6 Security configuration(CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 88 Operating Instructions, 01/2017, C79000-G8976-C426-03 4.6.1.2 Creating a VPN tunnel for S7 communication between stations ...

[Page 89] Siemens ET 200SP

Configuration and operation 4.6 Security configuration(CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 89 Select the "Activate security features" check box After loggi...

[Page 90] Siemens ET 200SP

Configuration and operation 4.6 Security configuration(CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 90 Operating Instructions, 01/2017, C79000-G8976-C426-03 4.6.1.3 VPN communication with SOFTNET Security Client (engineering s...

[Page 91] Siemens ET 200SP

Configuration and operation 4.6 Security configuration(CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 91 VPN subscriber (active) ⇔ gateway (dyn. IP address) ⇔ Internet ⇔ gat...

[Page 92] Siemens ET 200SP

Configuration and operation 4.7 Table "Certificate manager" (CP 1542SP-1 IRC, CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 92 Operating Instructions, 01/2017, C79000-G8976-C426-03 4.6.2.3 Notation for the source IP a...

[Page 93] Siemens ET 200SP

Configuration and operation 4.7 Table "Certificate manager" (CP 1542SP-1 IRC, CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 93 The local certificate manager Certific...

[Page 94] Siemens ET 200SP

Configuration and operation 4.7 Table "Certificate manager" (CP 1542SP-1 IRC, CP 1543SP-1) CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 94 Operating Instructions, 01/2017, C79000-G8976-C426-03 Assign the certificates in the CP config...

[Page 95] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 95 Programming (OUC) 5 5.1 Program blocks for OUC Using the program blocks for Open User Communication (OUC) Connections of Open User C...

[Page 96] Siemens ET 200SP

Programming (OUC) 5.1 Program blocks for OUC CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 96 Operating Instructions, 01/2017, C79000-G8976-C426-03 Connection descriptions in system data types (SDTs) For the connection description, the blocks...

[Page 97] Siemens ET 200SP

Programming (OUC) 5.1 Program blocks for OUC CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 97 SDT only for CP 1543SP-1 The CP 1543SP-1 can use the following SDT for data transfer with Secu...

[Page 98] Siemens ET 200SP

Programming (OUC) 5.1 Program blocks for OUC CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 98 Operating Instructions, 01/2017, C79000-G8976-C426-03 ...

[Page 99] Siemens ET 200SP

CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 Operating Instructions, 01/2017, C79000-G8976-C426-03 99 Diagnostics and maintenance 6 6.1 Diagnostics options The following diagnostics options are available. LEDs of the module For inf...

[Page 100] Siemens ET 200SP

Diagnostics and maintenance 6.2 Diagnostics with SNMP CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1 100 Operating Instructions, 01/2017, C79000-G8976-C426-03 6.2 Diagnostics with SNMP Requirement The requirement for using SNMP is the ena...