Russound P125 Installation Manual

[Page 1] Russound P125

P125 Dual Source Power Amplier Installation Manual ...

[Page 2] Russound P125

2 Russound P125 Installation Manual The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of suci...

[Page 3] Russound P125

3 Russound P125 Installation Manual Safety Instructions .................................................................................................................. 2 Product Overview .............................................................

[Page 4] Russound P125

4 Russound P125 Installation Manual Introduction The Russound P125 is 2-channel dual source power amplier with auto- source switching. Features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the...

[Page 5] Russound P125

5 Russound P125 Installation Manual FRONT AND REAR PANEL 12V Trigger In / Out Delay Time Speaker Level Input Primary Input Stereo/Bridge Switch Voltage Selector Power Inlet / Fuseholder Secondary Input/Output Speaker Level Line Input Switc...

[Page 6] Russound P125

6 Russound P125 Installation Manual Stereo Mode (Single Source) The P125 can be congured as a power upgrade for specic zones, for use with large speaker selectors, and for long parallel speaker runs (outdoor zones). For a single source conn...

[Page 7] Russound P125

7 Russound P125 Installation Manual SYSTEM DIAGRAM - STEREO MODE Stereo Mode Conguration with Dual Sources (CD player is primary source) P125 Amplier Line Out RCA Cable DVD Player (primary source) Speaker Cables 8 Ohm Speakers Speaker Cables M...

[Page 8] Russound P125

8 Russound P125 Installation Manual SYSTEM CONFIGURATION - BRIDGED MODE Bridged Mode In this mode both the left and right channels are combined for a higher power mono output. For proper operation, the Master Level left and right channel adjustmen...

[Page 9] Russound P125

9 Russound P125 Installation Manual System Conguration with External Volume Control The P125 amplier can be used for multiple pairs of speakers with impedance matching volume controls and/or speaker selectors. In this conguration, connect...

[Page 10] Russound P125

10 Russound P125 Installation Manual TECHNICAL SPECIFICATIONS P125 Amplier Continuous Output Power: 80W per channel at 8 ohms (<0.2% THD+N) 125W per channel at 4 ohms 250W bridged mono at 8 ohms Signal-to-Noise Ratio: >93dB...

[Page 11] Russound P125

11 Russound P125 Installation Manual WARRANTY Warranty The Russound P125 Amplier is guaranteed against all defects in materials and workmanship for two (2) years from the date of purchase. During this period, Russound will replace any defective...

[Page 12] Russound P125

P125 Dual Source Power Amplier Installation Manual Russound, Inc. 1 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 email: [email protected] www.russound.com 28-1388 04.23.15, Rev.1 ©2015 Russound. All rights rese...