TKO 9GR Assembly Manual

Download or browse on-line these Assembly Manual for TKO 9GR Exercise Bike.

TKO 9GR Manual Information:

This manual for TKO 9GR, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 23 pages, and the size of the file at download is . The document type is Assembly Manual.

Download Manual

Summary of Contents:

[Page 1] TKO 9GR

ASSEMBLY MANUAL 9GR - RECUMBENT CYCLE ...

[Page 2] TKO 9GR

...

[Page 3] TKO 9GR

2 IMPORTANT SAFETY INSTRUCTIONS • Read this Owner’s Manual and follow it’s instructions carefully before assembly the machine. Make sure that it is properly assembled and tightened before each use. • Inspect your machine prior to...

[Page 4] TKO 9GR

3 ...

[Page 5] TKO 9GR

4 BEFORE YOU BEGIN Note: Before beginning assembly remove all parts and hardware from the carton, ensure you have everything according to the list. THE FOLLOWING TOOLS ARE INCLU...

[Page 6] TKO 9GR

5 HARDWARE PACK Hardware pack Part # Description Q’TY 85 85 Washer (8x38x2.0t) 4 90 90 Lock Washer (M8) 6 95 95 Screw, Round Head (M5xp0.8x15mm) 10 96 96 Screw, Round Head (M5xp0.8x50mm) 2 104 104 Bolt, So...

[Page 7] TKO 9GR

6 EXPLODED DIAGRAM (A) ...

[Page 8] TKO 9GR

7 PARTS LIST NO. Item Name Q'TY 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Seat Handlebar 1 5 Back Cushion Bracket 1 6 Back Cushion Frame 1 7 Seat Frame 1 8 Upright Post 1...

[Page 9] TKO 9GR

8 NO. Item Name Q'TY 36 Quick-Access Key Base (-) 1 37 Square Plug (30x60mm) 1 38 End Cap (50x100mm) 4 39 Leveler (ψ50) 4 40 Transport Wheel 2 41 Generator 1 42 Belt (584mm J8) 1 43 Pulley ...

[Page 10] TKO 9GR

9 NO. Item Name Q'TY 73 Left Crank 1 74 Right Crank 1 75 Crank Shaft 1 76 Roller Axle 1 77 Spacer (M8×12×7mm) 2 78 Seat Linkage Spacer 1 79 Eye Bolt (40mm) 2 80 Eye Bolt (50mm) 4 81 ...

[Page 11] TKO 9GR

10 NO. Item Name Q'TY 110 Bolt, Hex Head (M8×p1.25×75mm) 1 111 Bolt, Hex Head (M8×p1.25×80mm) 4 112 Bolt, Hex Head (M10×p1.5×145mm) 2 113 Bolt, Hex Head (M10×p1.5×144mm) 2 114 Bolt, Hex Head (M10×p1....

[Page 12] TKO 9GR

11 ASSEMBLY INSTRUCTIONS STEP 1 Leveler Installed a. Attach the Leveler (39) to the Front Stabilizer (2) and the Rear Stabilizer (3) b. Adjust the Leveler (39) then securely tighten the Adjustment Plate (diagram above) STEP 2 Front &...

[Page 13] TKO 9GR

12 STEP 3 – Upright Post Assembly Slide the Console Bracket (18) and the Upright Sleeve (22) onto the Upright Post (8.) • Make sure the flat side of the Upright Post (8) is facing forw...

[Page 14] TKO 9GR

13 STEP 5 a. Connect the Extension Wire (124) in the Upright post to the Lower Connection Wire (125) in the Main Frame. b. Connect the Pulse Sensor Wire in the Upright Post (128) to the Pulse Sensor Wire in the Main...

[Page 15] TKO 9GR

14 STEP 6 – Display Console and Handlebar Assembly a. Remove the Screw (M3x10mm) (91) in the back on the console using a Philips Screw Driver. b. Remove the Battery Door (20). c. Install the ...

[Page 16] TKO 9GR

15 STEP 8 a. Connect the Pulse Sensor Wire in the back of the Console (127) to the Pulse Sensor Wire in the Upright Post (128.) b. Connect the Extension Wire (123) in the back of the Console to the Extension Wire (124)...

[Page 17] TKO 9GR

16 STEP 12 a. Remove the 4 Bolts, Button Head (M8xp1.25x20mm) (102) and 4 Lock Washers (M8) (90) from the Back Cushion Frame (6). b. Installed the Back Cushion Frame (6) to the Bac...

[Page 18] TKO 9GR

17 STEP 15 Attach the Accessory Tray (32) onto the Seat Handlebar (4) and secure it using 4 Screws (M4x10mm) (131) from underneath. Tighten it with a Philip Screw Driver. STEP 16 Install the Seat Handlebar (4) into the...

[Page 19] TKO 9GR

18 STEP 18 a. Loosen and remove all 4 Bolt, Button Head (M8xp1.25x20mm) (102) at the bottom on the Seat Cushion (25). b. Attach the Seat Cushion (25) onto the Seat Frame (7) and ...

[Page 20] TKO 9GR

19 Your Recumbent Cycle is now ready to use. Please make sure that all Nuts and Bolts are securely tightened before exercising. Transport your Recumbent Cycle • There ar...

[Page 21] TKO 9GR

20 ADJUSTMENTS Uneven Floor After placing the unit where it will be used, check its stability. If there is even a slight rocking motion or the unit is not stable, determine which stabilizer is not resting on the floor. To adjust the Floor...

[Page 22] TKO 9GR

21 Adjusting Seat Position & Back Rest Angle Seat Adjustments • Lifting the Seat Adjustment Leveler upward to move the seat forward and backward. • Release the Leveler when adjusted to the...

[Page 23] TKO 9GR

22 How To Replace Batteries a. Remove the Console Bracket (18) by loosening the Screws at the bottom of the Console Bracket. b. Loosen and remove the Screw at the bottom on the Console (17) by using a Philips Screw Driver. c. Open the ...