Sea-doo 230 Series Operator's Manual

Download or browse on-line these Operator's Manual for Sea-doo 230 Series Boat.

Sea-doo 230 Series Manual Information:

This manual for Sea-doo 230 Series, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 180 pages, and the size of the file at download is . The document type is Operator's Manual.

Download Manual

Summary of Contents:

[Page 1] Sea-doo 230 Series

...

[Page 2] Sea-doo 230 Series

WARNING Disregarding any of the safety precautions and instructions contained in this Operator’s Guide, SAFETY DVD and on-product labels could cause injury including the possibility of death! WARNING This boat may exceed the performance of other bo...

[Page 3] Sea-doo 230 Series

TABLE OF CONTENTS FOREWORD .......................................................................... 6 KnowBeforeyouGo............................................................. 6 SafetyMessages........................................................

[Page 4] Sea-doo 230 Series

TABLE OF CONTENTS BOAT INFORMATION CONTROLS.......................................................................... 46 1)SteeringWheel............................................................... 47 2)Throttle/ShifterControl ........................

[Page 5] Sea-doo 230 Series

TABLE OF CONTENTS EQUIPMENT (cont’d) 7)BowStorageCompartment................................................. 73 8)DeckStorageCompartment ................................................ 74 9)RearStorageCompartment/EngineCover/ReleaseHandle...........

[Page 6] Sea-doo 230 Series

TABLE OF CONTENTS SPECIALPROCEDURES ......................................................... 108 JetPumpWaterIntakeandImpellerCleaning.............................. 108 TowingtheBoatinWater..................................................... 109 Ca...

[Page 7] Sea-doo 230 Series

TABLE OF CONTENTS BOAT IDENTIFICATION (cont’d) HullIdentificationNumber ................................................... 138 EngineIdentificationNumber................................................ 138 ENGINEEMISSIONSINFORMATION..................

[Page 8] Sea-doo 230 Series

FOREWORD Congratulations on your purchase of a new Sea-Doo Boats. It is backed by the BRP limited warranty and a net- work of authorized Sea-Doo Boats dealers ready to provide the parts, ser- vice or accessories you may require. At delivery, you were...

[Page 9] Sea-doo 230 Series

FOREWORD change specifications, designs, fea- tures, models or equipment without incurring any obligation upon itself. This Operator's Guide and the SAFETY DVD shouldremainwiththeboat when it's sold. _______________ 7 ...

[Page 10] Sea-doo 230 Series

FOREWORD This page is intentionally blank 8 _______________ ...

[Page 11] Sea-doo 230 Series

SAFETY INFORMATION ________ SAFETY INF ORMATION ________ 9 ...

[Page 12] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES Reminders Regarding Operation – Engine exhaust contains carbon monoxide (CO), which can cause injury or death if inhaled in sufficient quantities. Educate all occupants about the risks and symptoms of CO accumulation and CO ...

[Page 13] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES Before Getting Underway – Always perform the pre-ride inspec- tion as specified in this Operator's Guide. – Do not exceed the payload or pas- senger capacities for this boat, which are listed on the capacity plate loc...

[Page 14] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES Carbon Monoxide and Boating Burning a material containing carbon produces carbon monoxide (CO), an odor- less and colorless gas. Because CO has a similar density as air, it can spread throughout an enclosed space unnoticed bec...

[Page 15] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES WARNING Engine exhaust fumes contain carbon monoxide (CO) which can accumu- late in and around the boat (under bimini top, in cockpit, etc.). CO can be harmful or fatal if inhaled. Assure there is adequate ventilation whenever...

[Page 16] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES F00A2IL WHILE UNDERWAY (BACKDRAFTING) Even with the best boat design and construction, CO may still accumulate in enclosed or confined areas under certain conditions. Continually observ e passen- gers for symptoms of CO poison...

[Page 17] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES Water Sports WARNING Avoid Personal Injury! Your boat is not designed for and should not be used for pulling parasails, kites, gliders, or any device which can become airborne. Use boat only for appropriate water sports. WARNI...

[Page 18] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES F00A2LY SWIM AREA BUOY 1. Do not water ski between sunset and sunrise. It is illegal in most states. 2. Do not drive the boat directly behind a water skier, tuber or wakeboarder as the boat may overtake a person who falls in t...

[Page 19] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES F00A2NL FASTER - Palm of one hand pointing upward. SLOWER - Palm pointing down. SPEED OK - Arm upraised with thumb and finger joined to form circle. RIGHT TURN - Arm outstretched pointing to the right. LEFT TURN - Arm outstret...

[Page 20] Sea-doo 230 Series

SPECIAL SAFETY MESSAGES Hypothermia Hypothermia, the loss of body heat to the water, is a significant cause of deaths in boating accidents. After an individual has been overcome by hypothermia, he or she will lose con- sciousness and then drown. PFDs...

[Page 21] Sea-doo 230 Series

SAFETY EQUIPMENT Mandatory Safety Equipment As the owner of the boat, you are re- sponsible for assuring that all manda- tory safety equipment is aboard. Safety equipment required by regula- tions is mandatory. Check state and lo- cal regulations abo...

[Page 22] Sea-doo 230 Series

SAFETY EQUIPMENT wearer in a vertical or slightly back- ward position and has no tendency to turn the wearer face down. It has the same buoyancy as a Type Il PFD and may be appropriate in areas where other people are commonly involved in water activi...

[Page 23] Sea-doo 230 Series

SAFETY EQUIPMENT – For their own safety and the safety of others, all non-swimmers, poor swimmers, and small children should wear PFD's at all times whether the boat is stationary or moving. – Check the PFD frequently to make sure that it is...

[Page 24] Sea-doo 230 Series

SAFETY EQUIPMENT BASIC EQUIPMENT Anchor Boat hook Compass Dewatering device (pump or bailer) Distress signals Dock fenders Electronic Position Indicating Radio Bacon (EPIRB) First aid kit Flashlight Local map Mooring lines Oarorpaddle Tow line VHF ra...

[Page 25] Sea-doo 230 Series

PRACTICE EXERCISES It is always a good idea to practice and get familiar with all controls, functions and handling characteristics of your boat before venturing on the water. Always secure the tether cord to the engine cut-off switch and the clip to ...

[Page 26] Sea-doo 230 Series

PRACTICE EXERCISES Important Factors Not to Neglect In addition, always remember that the following conditions have a direct im- pact on how your boat will behave and respond to different inputs: – Load change – Currents –Wind – Water conditi...

[Page 27] Sea-doo 230 Series

SAFE BOATING PRACTICES YOU are responsible for your own safety, the safety of your passengers, and the safety of fellow boaters. Drugs and Alcohol Do not use drugs or drink alcohol while operating a boat. Like driving a car, driving a boat requires s...

[Page 28] Sea-doo 230 Series

SAFE BOATING PRACTICES – Avoid adding on accessories or equipment which may alter your control of the boat. – Riding with a passenger(s) or pulling a tube, skier or wakeboarder makes the boat handle differently and re- quires greater skills. – ...

[Page 29] Sea-doo 230 Series

NAVIGATION RULES Operating Rules Operating a boat can be compared with driving unmarked highways and roads. To prevent collisions or avoid other boaters, a system of operating rules must be followed. It's not only common sense, it's the law...

[Page 30] Sea-doo 230 Series

NAVIGATION RULES Navigation System Navigational aids, such as signs or buoys, can help you identify safe wa- ters. Buoys will indicate whether you should keep to the right (starboard) or to the left (port) of the buoy or to which channel you can cont...

[Page 31] Sea-doo 230 Series

NAVIGATION RULES out on the water between sunset and sunrise, you are required to display ap- propriate navigation lights. ________ SAFETY INF ORMATION ________ 29 ...

[Page 32] Sea-doo 230 Series

FUELING Recommended Fuel Use unleaded gasoline or oxygenated fuel containing a maximum total of 10% of ethanol or methanol. The gaso- line used must have the following rec- ommended octane rating. NOTICE Never experiment with other fuels. The use of ...

[Page 33] Sea-doo 230 Series

FUELING 4. Insert the gas pump spout into the filler neck and fill up fuel tank. WARNING To prevent fuel back-flow, fill up tank slowly so the air can escape from the fuel tank. 5. Stop filling immediately after the re- lease of the gas pump nozzle h...

[Page 34] Sea-doo 230 Series

TRAILERING INFORMATION Refer to the trailer owner's manual for proper capacity, operation, mainte- nance, accessories and warranty. Check the regulations in your area con- cerning towing a trailer, especially the following rules: – Brake syste...

[Page 35] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS The following labels are on your boat. If missing or damaged, they can be replaced free of charge. See an authorized Sea-Doo Boats dealer. Please read the following labels carefully before operating your boat. ...

[Page 36] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS Safety Labels 4,14,22 7 5,10,12,13,15,24 820 16 17,18 921 6,19 2 1,11,23 3 20 21 lmo2012-005-100_a TYPICAL - 230 WAKE SHOWN 219904003 LABEL 1 - TYPICAL 204901330 LABEL 2 204902065 LABEL 3 219903992 LABEL 4 WARN...

[Page 37] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS Avoid Serious Or Fatal Injury. Do Not Occupy Seat When Speed Exceeds 5 M.P.H. WARNING 204901424 LABEL 7 204900359 LABEL 8 219903498 LABEL 9 219904002 LABEL 10 mmo2008-003-007 LABEL 11 204 902 067 WARNING  Ch...

[Page 38] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS 204901625 LABEL 13 204901626 LABEL 14 219903475 LABEL 15 36 _______ SAFETY I NFORMATION ________ ...

[Page 39] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS WARNING 204 902 068 Misuse of tower may cause severe injury or death.  Use tower only for wakeboarding or water skiing.  Do not allow tow rope to dangle or get entangled with occupants, boat or engine. �...

[Page 40] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS 219903412E LABEL 24 – CAPACITY - 230 CHALLENGER 219903413E LABEL 24 – CAPACITY - 230 WAKE Compliance Labels 3 2 1 lmo2012-005-100_b TYPICAL - 230 WAKE SHOWN 38 _______ SAFETY I NFORMATION ________ ...

[Page 41] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS 219902679 LABEL 1 – EMISSION CONTROL 230 Challenger SE and 230 Wake lmo2012-001-200 LABEL 2 – EPA COMPLIANCE 219903480 LABEL3-ISO ________ SAFETY INF ORMATION ________ 39 ...

[Page 42] Sea-doo 230 Series

LOCATION OF IMPORTANT ON-PRODUCT LABELS Technical Information Labels 2 1 lmo2012-005-100_c TYPICAL - 230 WAKE SHOWN 219903596 LABEL 1 219903993 LABEL 2 40 _______ SAFETY I NFORMATION ________ ...

[Page 43] Sea-doo 230 Series

PRE-RIDE INSPECTION WARNING The pre-ride inspection is very important before operating the boat. Bring all safety equipment required by local laws. Perform a pre-ride inspec- tion before each ride to detect potential problems during operation. The pr...

[Page 44] Sea-doo 230 Series

PRE-RIDE INSPECTION Pre-Ride Check List When Boat is Trailered to Waterway SUMMARY ITEM OPERATION ✔ Fuel tank Refill. Hull and deck Inspect for damage. Jet pump water intake Inspect/clean. Bilge Check for abnormal water presence in bilge and ensure...

[Page 45] Sea-doo 230 Series

PRE-RIDE INSPECTION Pre-Ride Check List When Boat is Moored to a Dock SUMMARY ITEM OPERATION ✔ Fuel tank Refill. Bilge Check for abnormal water presence in bilge. Engine compartment Verify for leaks or gasoline vapor odor. Verify fuel system compon...

[Page 46] Sea-doo 230 Series

PRE-RIDE INSPECTION This page is intentionally blank 44 _______ SAFETY I NFORMATION ________ ...

[Page 47] Sea-doo 230 Series

BOAT INFORMATION _______________ 45 ...

[Page 48] Sea-doo 230 Series

CONTROLS Cockpit View lmo2012-005-101_a TYPICAL - 230 CHALLENGER lmo2012-005-102_d TYPICAL - 230 WAKE 46 ______________ ...

[Page 49] Sea-doo 230 Series

CONTROLS 1) Steering Wheel The steering wheel controls the direc- tion of the boat. Turning the steering wheel clockwise steers the boat to the right and inversely. 2) Throttle/Shifter Control Shifter Lever A 3-position lever: – Forward –Neutral ...

[Page 50] Sea-doo 230 Series

CONTROLS Pulling the key from the engine cut-off switch stops engines. WARNING Should the tether cord become loose or fail to remain on engine cut-off switch, replace it immedi- ately. lmo2010-003-015_a 1. Tether cord clip (switch side) 2. Tether cor...

[Page 51] Sea-doo 230 Series

CONTROLS Insert key in switch and turn to the de- sired position. NOTICE If the key does not turn easily, do not force it. Pull it out and reinsert key. OFF NOTE: When turning the key to OFF position, the boat electrical system will take a few second...

[Page 52] Sea-doo 230 Series

CONTROLS NOTICE Using the bilge blower for a prolonged time when the engines are not running will discharge the battery. 6) Engine Start/Stop Buttons The Start/Stop buttons are located to the RH side of the toggle switches be- low the analog fuel gau...

[Page 53] Sea-doo 230 Series

CONTROLS lmo2012-005-008_b 1. Bilge pump switch 1 2 lmo2010-003-021_a 1. ON position 2. OFF position Turn to ON position when a manual op- eration of the bilge pump is required (after cleaning, storage, etc.). Turn switch to OFF when finished. NOTICE...

[Page 54] Sea-doo 230 Series

CONTROLS 1 2 3 A25H05A 1. NAV 2. OFF 3. ANC ANC: Turns on the anchorage light when the boat is anchored. Only the stern light is lit. OFF: Turns off all lights. NAV:Turnsonbothbowandstern lights and illuminates the gauges. 10) Deck Light Switch Thisi...

[Page 55] Sea-doo 230 Series

CONTROLS lmo2012-005-200_b 1. SET button Press SET to select the desired func- tion or to save any modified settings. For further details on the information center and the display modes, refer to INFORMATION CENTER . 13) UP and DOWN Switch 230 Challe...

[Page 56] Sea-doo 230 Series

CONTROLS WARNING The added weight of the ballast af- fects the handling characteristics of the boat. Do not perform high speed maneuvers when ballast reservoirs contain water. Further- more, it is then not recommended to operate the boat at speeds of...

[Page 57] Sea-doo 230 Series

INFORMATION CENTER (230 CHALLENGER) It allows the operator to view at a glance several indications such as, engines RPM, fuel level and engine temperature. The gauge can also be used to navigate through and select several functions, modes of operatio...

[Page 58] Sea-doo 230 Series

INFORMATION CENTER (230 CHALLENGER) PILOT LAMPS MESSAGE DISPLAY DESCRIPTION LH TACHOMETER – When turn ON: SKI MODE is engaged When blinking: SKI MODE is selected but not engaged _ CRUISE mode engaged DOCK READY - DOCKING mode engaged - ECO mode eng...

[Page 59] Sea-doo 230 Series

INFORMATION CENTER (230 CHALLENGER) ni MA h/lagMPR pal lmo2010-003-026 NUMERICAL DISPLAY When the information center is first powered up, the numerical display de- faults to the last function chosen by the operator from the multifunction display. The...

[Page 60] Sea-doo 230 Series

INFORMATION CENTER (230 CHALLENGER) Changing Numerical Display Indication To change the indication in the numeri- cal display, press the MODE button re- peatedly until DISPLAY is visible in the multifunction display. ni MA h/lagMPR pal lmo2010-003-02...

[Page 61] Sea-doo 230 Series

INFORMATION CENTER (230 CHALLENGER) Selecting Functions When operating at speed, the multi- function display normally provides an indication of the compass direction and azimuth the boat is traveling. To select the various functions avail- able throu...

[Page 62] Sea-doo 230 Series

INFORMATION CENTER (230 CHALLENGER) For a compass indication to be dis- played, the GPS must have a good link with the navigation satellites. This is confirmed when the COMPASS active indicator is visible in the digital screen. ni MA h/lagMPR pal 2 1...

[Page 63] Sea-doo 230 Series

TOUCHSCREEN DISPLAY (230 WAKE) WARNING Observing or using the touch- screen display can distract from safe operation. Always keep on observing the traffic and make sure the surrounding is clear and safe. Navigating the Touchscreen Display Cruise Mode...

[Page 64] Sea-doo 230 Series

TOUCHSCREEN DISPLAY (230 WAKE) Trip Display Touch the TRIP DISPLAY icon to dis- play the following information: – Trip meter –Topspeed – Average speed – Instant fuel economy – Average fuel economy – Distancetoempty. The radio frequency is...

[Page 65] Sea-doo 230 Series

TOUCHSCREEN DISPLAY (230 WAKE) lmo2012-005-022_a COMPASS BUTTON BLINKS YELLOW WHEN FAULT OCCURS 1. Fault icon Nav Display lmo2012-005-020_a TYPICAL - NAV MAP To enter mode: Touch NAV icon. Refer to EQUIP- MENT . Use oval pad to control NAV mode. To e...

[Page 66] Sea-doo 230 Series

ANALOG GAUGES (230 CHALLENGER) lmo2012-005-101_d 230 CHALLENGER 1. Analog fuel level gauge 2. Analog voltmeter 3. Analog temperature gauge Analog Temperature Gauge Located to the right of the information center, this gauge continuously indi- cated th...

[Page 67] Sea-doo 230 Series

ANALOG GAUGES (230 CHALLENGER) Analog Fuel Level Gauge Located to the right of the speedome- ter, this gauge continuously indicates the amount of fuel in fuel tank when engines are running. lmo2012-005-207_a 1. Analog fuel level gauge The gauge is il...

[Page 68] Sea-doo 230 Series

ANALOG GAUGES (230 WAKE) lmo2012-005-701_a 230 WAKE 1. Analog speedometer 2. Analog fuel level gauge 3. Analog voltmeter Analog Speedometer The speedometer, located in the right top corner of the drivers' cockpit, pro- videsananalogindicationoft...

[Page 69] Sea-doo 230 Series

ANALOG GAUGES (230 WAKE) The voltmeter displays the battery voltage. Normally, it should indicates around 14 V (volts). lmo2012-005-205_b 1. Analog voltmeter NOTE: It is normal to see a voltage drop during engine cranking. _______________ 67 ...

[Page 70] Sea-doo 230 Series

EQUIPMENT 24 22,33 3 16 34 4 1 31 1325 2 3195,65,18,193 2514 14 7 25 32 10 9 2 12 10 14 8 36 32 11 25 29 15 35 28 30 23 20 28 27 lmo2012-005-105_a TYPICAL - 230 WAKE SHOWN 2113 17 24 3131 24 29 26 26 lmo2011-004-006_b TYPICAL 68 ______________ ...

[Page 71] Sea-doo 230 Series

EQUIPMENT 1) Driver/Passenger Seat Swivel Adjustment WARNING Always ensure drivers seat swivel is locked so that seat faces steering wheel before riding. 230 Challenger Both driver and passenger seats can swivel. Pull and hold the lever located on th...

[Page 72] Sea-doo 230 Series

EQUIPMENT Height Adjustment 230 Wake and 230 Challenger SE Driver seat can be adjusted in height. To move the seat up, pull the foremost lever and release weight from the seat cushion. When the desired height is reached, release the lever. To move th...

[Page 73] Sea-doo 230 Series

EQUIPMENT 1 2 lmo2009-006-009_a 230 CHALLENGER AND 230 WAKE SET-UP 1. Side seats and storage 2. Removable cooler The ballast reservoirs are located be- neath the aft side seat cushions and in the ski locker. NOTICE Avoid storing any items in ballast ...

[Page 74] Sea-doo 230 Series

EQUIPMENT Before getting underway or towing the boat on a trailer, fasten the retaining cord on each rear side cushion. WARNING Ensure that the rear side and any removable cushions are properly secured to avoid lost of cushions while underway or when...

[Page 75] Sea-doo 230 Series

EQUIPMENT lmo2011-004-021_a TYPICAL-230CHALLENGER 1. Lower glove box 2. Upper glove box lmo2011-004-022 Operator's glove box is also provided. It is located just over the information center cluster. lmo2011-004-023 6) Console Storage Compartment...

[Page 76] Sea-doo 230 Series

EQUIPMENT lmo2007-003-077_a 1. Latch To close, lift the latch ring and slowly lower the cover. NOTE: Always relatch compartment lid. 8) Deck Storage Compartment The deck storage compartment is a convenient lockable location for wa- ter-skis, paddles,...

[Page 77] Sea-doo 230 Series

EQUIPMENT lmo2008-006-016_a 230 CHALLENGER/SE 1. Latch handle lmo2012-005-003_a 230 CHALLENGER SP/230 WAKE 1. Latch handle To release latch, pull and turn latch han- dle. Turning the latch handle locks it in position. Lift storage compartment cover, ...

[Page 78] Sea-doo 230 Series

EQUIPMENT 11) Rear Grab Handles Provide a handhold for boarding when needed. NOTICE Never use the grab han- dle to tow anything or to lift the boat. 12) Swim Platform Provides an anti-skid surface for easy boarding either from front or rear of boat d...

[Page 79] Sea-doo 230 Series

EQUIPMENT F09L5TY SLIDE THIS DIRECTION Thread onto folding joint as shown be- low. F09L5UY Lift connector cap. Insert post in connector hole. Ensure to align hole keyway with post screw head. lmo2010-002-003_b 1. Stern light post 2. Post screw head 3...

[Page 80] Sea-doo 230 Series

EQUIPMENT When positioned correctly, tighten plastic knob to retain the pole in this position. Connect both stern light connectors. To turn the stern light on, see NAVIGA- TION LIGHTS SWITCH in this section. NOTICE Usingthesternlightfora prolonged ti...

[Page 81] Sea-doo 230 Series

EQUIPMENT lmo2010-003-062_a 1. Radio remote control 18) Audio Input Jack/USB Port This boat is equipped with an audio input jack and a USB port. They are lo- cated in the driver's glove box. Using these adapters, an audio player suchasa CD playe...

[Page 82] Sea-doo 230 Series

EQUIPMENT lmo2008-006-012_a 1. Drain plug 2. Loosen 3. Tighten 22) Walk-Thru Door/ Windshield CAUTION – Use caution when operating door. – Hand will contact boat structure during operation. – Latch door at all times. – Walkthru door should be...

[Page 83] Sea-doo 230 Series

EQUIPMENT lmo2009-006-013_a 1. Cup holder 24) Bow and Stern Eyelets Bow Eyelet Eyelets can be used for mooring, tow- ing and as a tie-down point for trans- portation. lmo2007-003-008_a 1. Bow eyelet Stern Eyelets Eyelets can be used for mooring, tow-...

[Page 84] Sea-doo 230 Series

EQUIPMENT WARNING “Teak Surfing” is extremely dan- gerous to participants due to their proximity to the rear of the boat where direct contact with the ex- haust fumes from the boat engine is the highest. Carbon monoxide poisoning can occur and re...

[Page 85] Sea-doo 230 Series

EQUIPMENT NOTE: A pad is provided for lowering the tower for quick bridge clearance. Place the pad on the forward hoop of the tower where it comes in contact with the windshield and slowly rest the tower on the windshield. NOTICE Use storage brackets...

[Page 86] Sea-doo 230 Series

EQUIPMENT lmo2011-003-003_a BRACKET HOOK IN TOWER MOUNT 1. Bracket hook 2. Tower mount pin 6. Secure the other end of bracket to tower leg end with the retaining screw. lmo2012-005-002_a 1. Knob 2. Holder bracket (upper end) 3. Tower leg end NOTE: Fo...

[Page 87] Sea-doo 230 Series

EQUIPMENT 1 lmo2011-006-002_a 1. UNLOCK/RESET position (port side) 1 lmo2011-006-003_a 1. UNLOCK/RESET position (starboard side) 3. Raise the tower to its highest posi- tion. lmo2011-002-022_b TYPICAL - RAISING TOWER 4. On both sides of tower, turn h...

[Page 88] Sea-doo 230 Series

EQUIPMENT Gently pull on the heating duct grill to stretch. lmo2007-003-050_a PASSENGER'S SIDE 1. Multi-purpose heating duct lmo2011-004-029_a PASSENGER'S SIDE 1. Adjustable heating duct 2. Heating duct stretched 28) Ballast System 230 WAKE...

[Page 89] Sea-doo 230 Series

EQUIPMENT Monitor the water levels in your bal- last through the touchscreen. Refer to TOUCHSCREEN DISPLAY (230 WAKE) . NOTICE It is always a good prac- tice to monitor ballast reservoir fill- ing and stop pump before it comes out from ballast vent f...

[Page 90] Sea-doo 230 Series

EQUIPMENT lmo2007-003-034_a TYPICAL — THRU-HULL VALVE 1. Closed position WARNING Never tow a boat with water re- maining in the ballast reservoirs. The weight of ballast increases the load on the trailer, the axle, and thetires,whichcouldleadtopre-...

[Page 91] Sea-doo 230 Series

EQUIPMENT 29) Bimini Top If so Equipped The bimini top is convenient for protec- tion against inclement weather or sun- shine. DANGER – Exhaust fumes from engines contain deadly carbon monoxide gas (CO). – Boat with bimini top are most likely to ...

[Page 92] Sea-doo 230 Series

EQUIPMENT lmo2007-003-082_a 1. Hook strap to body eyelet Adjust strap tension as needed. Closing Bimini Top NOTE: If canvas of bimini top has been splashed by salt water, rinse canvas with cold fresh water. At any time when canvas is wet, let dry bef...

[Page 93] Sea-doo 230 Series

EQUIPMENT With assistance, carefully lift bimini top and remove. Installation is procedure in reverse, however, pay attention to bimini top orientation for proper positioning. 30) Cockpit Table 230 Challenger SE and SP Conveniently stored inside the ...

[Page 94] Sea-doo 230 Series

EQUIPMENT lmo2012-005-005_a TYPICAL 1. Elastic band NOTICE Ensure to fold and secure wakeboard racks inside boat prior to trailering. 32) Storage Nets Located at the rear and at the front of the boat, these storage areas provide quick, easy access fo...

[Page 95] Sea-doo 230 Series

EQUIPMENT 35) Automatic Fire Extinguisher For CE Models Only This boat is equipped with an auto- matic fire extinguisher located in the engine compartment in case a fire starts in the engine compartment. NOTE: There is an indicator light on thesideof...

[Page 96] Sea-doo 230 Series

BREAK-IN PERIOD Operation During Break-In NOTICE Carefully follow the in- structions in this section. Failure to do so may reduce the life and/or per- formance of the engines. A break-in period of 10 hours is re- quired for each engine before continu...

[Page 97] Sea-doo 230 Series

OPERATING INSTRUCTIONS WARNING Always perform PRE-RIDE IN- SPECTION before operating the boat. Become thoroughly familiar with all controls and the function of each. Should any control or in- struction be not fully understood, refer to an authorized ...

[Page 98] Sea-doo 230 Series

OPERATING INSTRUCTIONS lmo2010-005-001_a TYPICAL A. 90 cm (3 ft) NOTICE Starting the engine or rid- ing the boat in shallower water may damage the impeller or other jet pump components. Boarding from Deep Water WARNING Inexperienced riders should pra...

[Page 99] Sea-doo 230 Series

OPERATING INSTRUCTIONS WARNING Do not start engines until all pas- sengers are properly seated. Starting the Engine NOTE: Before starting engines for the first time during the day, perform the complete pre-ride inspection as de- scribed in PRE-RIDE I...

[Page 100] Sea-doo 230 Series

OPERATING INSTRUCTIONS NOTICE To avoid starter motor overheating, the cranking period should not exceed 5 - 10 seconds and a rest period of 30 seconds should be observed between crank- ing cycles to let the startercooldown and its mechanism disengage...