Datavideo MS-VGB1K Instruction Manual

Download or browse on-line these Instruction Manual for Datavideo MS-VGB1K Processor.

Datavideo MS-VGB1K Manual Information:

This manual for Datavideo MS-VGB1K, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 30 pages, and the size of the file at download is . The document type is Instruction Manual.

Download Manual

Summary of Contents:

[Page 1] Datavideo MS-VGB1K

1 ...

[Page 2] Datavideo MS-VGB1K

2 Table of Contents FCC COMPLIANCE STATEMENT.......................................................................................... 3 WARNINGS AND PRECAUTIONS ........................................................................................

[Page 3] Datavideo MS-VGB1K

3 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received...

[Page 4] Datavideo MS-VGB1K

4 may often require extensive work by a qualified technician to restore the unit to normal operation; e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicatin...

[Page 5] Datavideo MS-VGB1K

5 for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. CE Marking is the symbol as shown on the left of this page. The letters "CE" are the abbreviati...

[Page 6] Datavideo MS-VGB1K

6 1. Introduction The MS-VGB1K Mobile VGB is a main Audio and Video processing unit for Virtual Interactive Board System (VGB-1000F/R). It is an integrated system of HD/SD Chromakeyer, HD/SD Digital Video Recorder, Audio Delay Box, H.264 Network ...

[Page 7] Datavideo MS-VGB1K

7 1.1 System Diagrams Virtual Interactive Board System (VGB-1000R) - Rear Projection ...

[Page 8] Datavideo MS-VGB1K

8 Virtual Interactive Board System (VGB-1000F) - Front Projection ...

[Page 9] Datavideo MS-VGB1K

9 2. Rear Panel Connections 2.1 RP-77 Rear Panel Foreground SDI/HDMI IN Connect one of SDI IN or HDMI IN to the camera shooting foreground Talent. Background HDMI IN Connect this port to an “output” port of a 2~...

[Page 10] Datavideo MS-VGB1K

10 AUDIO IN (R)/(L) Connect the RCA AUDIO IN either to a PC (PPT Audio) or to a player as background sound. MIC IN Connect this port to an external microphone. Note: At the back panel of AD-100M as shown in the diagram ...

[Page 11] Datavideo MS-VGB1K

11 CHROMA Control LAN Connect this port to a PC/NB with the DVK- 300HD software installed to apply the Chromakey effect to the foreground camera video. Please refer to DVK-300HD instruction manual for in-depth operation instructions. ...

[Page 12] Datavideo MS-VGB1K

12 2.2 PD-2A Power Center On / Off Switch Turns the PD-2A On / Off when using AC Power. Note: No function when DC Power is used. AC IN with built-in fuse AC Inlet for connecting to suitable mains power outlet (100-240 VAC) ....

[Page 13] Datavideo MS-VGB1K

13 3. Peripheral Device – FS-210 Foot Switch The FS-210 is a Foot Switch designed specifically for use with the MS-VGB1K. Its purpose is for the user to toggle between Record and Record Pause modes on the HDR-70 HD/SD Digital Video Recorder by ...

[Page 14] Datavideo MS-VGB1K

14 4. Front Panel 4.1 AD-100M Audio Delay Box Power ON/OFF Switch Switches the power ON/OFF Menu This switch allows access to the 9 mode system settings. Mode Select LEVEL or TIME information on LCD Display. LEV...

[Page 15] Datavideo MS-VGB1K

15 Adjust The ADJUST knob is for mode select and value adjustment. It can be rotated to navigate through menu options or parameter values and then pressed in to select or confir m a chosen value. 4.2 NVS-25 H.264 Network V...

[Page 16] Datavideo MS-VGB1K

16 STM Turns ON/OFF the network streaming feature Note: Before using this button, the user should first make sure the network and stream settings are properly configured. Restore factory defaults from the front panel. From powe...

[Page 17] Datavideo MS-VGB1K

17 Fwd / Rew Buttons In playback state, these buttons will operate as Fast Forward and Rewind Buttons. While the unit is playing, press Fwd or Rew button and then press Previous / Next Buttons which i f pressed multiple ti...

[Page 18] Datavideo MS-VGB1K

18 Record Button To start recording, press the Record Button and Play Button simultaneously. Note1: Unit will not record if no video signal is present. Note2: In PLAY state, press Record button, the display panel will show CH...

[Page 19] Datavideo MS-VGB1K

19 GEN-LOCK LED LED will be ON when signal is GEN- LOCKed. 2.5” Removable HDD Rack 2.5" Removable HDD Rack, and SATA & USB interface can be connected to PC for file transfer. 4.4 DVK-300HD HD/SD Chromakey ...

[Page 20] Datavideo MS-VGB1K

20 5. Quick Setup Before start using your MS-VGB1K, there are several settings that must be manually configured. This section will guide you through various specific configurations. 5.1 DVK-300HD HD/SD Chromakey – Alpha Matte Preview Output ...

[Page 21] Datavideo MS-VGB1K

21 3. Select “PREVIEW (PVW)” and then click the “SAVE” button to complete the configuration. 5.2 NVS-25 Video Streaming Server – Audio Setting The audio source should be set to RCA. Login the NVS-25 User Interface, click Settings -&...

[Page 22] Datavideo MS-VGB1K

22 6. Quick Calibration Guide 1. Locate AC inlet at the back of MS-VGB1K and connect it to the wall socket using a power cord. 2. Press the power button on the left of the AC inlet to turn on MS-VGB1K. 3. Plug the FS-210 footswitch into the ...

[Page 23] Datavideo MS-VGB1K

23 10. Use the camera (LBK-1) zoom function to make sure the four corners of the monitor correspond to the four corners of the green board. 11. Attach the eBeam receiver to the left of the board as shown in the diagram below and ...

[Page 24] Datavideo MS-VGB1K

24 12. Install the eBeam software on the notebook computer. 13. To calibrate the system, launch the eBeam software and press the circular button located at the center of the receiver once. 14. Once the calibration chart shown below app...

[Page 25] Datavideo MS-VGB1K

25 15. After the ninth calibration mark is touched, the calibration chart will disappear and return to the projected computer screen. 16. On the green board, locate the tools palette as shown below. 17. The user is allowed to turn on and off ...

[Page 26] Datavideo MS-VGB1K

26 18. After the system is successfully calibrated, insert the hard disk into the HDR-70 High Definition SD Digital Video Recorder and then turn the latch left to lock the inserted hard disk. 19. Step on the footswitch once to enter the HDR-70 R...

[Page 27] Datavideo MS-VGB1K

27 7. Dimensions All measurements in millimeter (mm) ...

[Page 28] Datavideo MS-VGB1K

28 8. Specifications Video Input DVK-300HD Foreground 1 x SDI or 1 x HDMI connector on RP-77 SDI Formats: 576i, 480i (SMPTE 259M-C) 1080i50, 1080i59.94,1080i60, 720p50,720p59.94, 720p60, 1080p25, 1080p30 (SMPTE 292M)1080p50, 1080p59.94,1080...

[Page 29] Datavideo MS-VGB1K

29 MPEG2 i-Frame Only: HD 1. 100Mbps 4:2:2 1920x1080/1280x720 2. 125Mbps 4:2:2 1920x1080/1280x720 SD 1. 25Mbps 4:2:2 720x480/720x576 2. 50Mbps 4:2:2 720x480/720x576 Audio Input (AD-100M) Microphone 1x XLR balanced MIC IN on RP-77 48V...

[Page 30] Datavideo MS-VGB1K

30 Service and Support ...