Dell Edge 5000 Series Installation And Operation Manual

Download or browse on-line these Installation And Operation Manual for Dell Edge 5000 Series Gateway.

Dell Edge 5000 Series Manual Information:

This manual for Dell Edge 5000 Series, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 101 pages, and the size of the file at download is . The document type is Installation And Operation Manual.

Download Manual

Summary of Contents:

[Page 1] Dell Edge 5000 Series

Dell Edge Gateway 5000 Series Installation and Operation Manual Computer Model: Dell Edge Gateway 5000\5100 Regulatory Model: N01G\N02G Regulatory Type: N01G001\N02G001 ...

[Page 2] Dell Edge 5000 Series

Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNI...

[Page 3] Dell Edge 5000 Series

Contents 1 Overview......................................................................................................................... 6 2 System views................................................................................................

[Page 4] Dell Edge 5000 Series

Ubuntu core OS basic function...................................................................................................................................34 UEFI capsule update.......................................................................

[Page 5] Dell Edge 5000 Series

Service and support......................................................................................................................................................... 70 6 I/O Module Overview........................................................

[Page 6] Dell Edge 5000 Series

1 Overview The Dell Edge Gateway 5000/5100 series allows you to connect (wired or wireless) to network enabled devices and manage them remotely in your existing network ecosystem. The system can be either mounted on the wall using the Dell approved ...

[Page 7] Dell Edge 5000 Series

2 System views System—Front Features 1 Power button Press and hold for 2 seconds to turn on the system if it is turned o. NOTE: For more details about the LED indicators on the front of the system, see LED indicators. 7 ...

[Page 8] Dell Edge 5000 Series

System—Front (LED indicators) Features 1 Power status LED Indicates the power‑state of the system. 2 Mobile broadband status LED Indicates the mobile broadband status and network activity. 3 Wireless status LED Indicates the wireless connectivity...

[Page 9] Dell Edge 5000 Series

Features 5 RS485 port Connect a RS485 device. 6 RS485 port Connect a RS485 device. 7 USB 3.0 port Connect a USB 3.0 device. 8 Network port Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or internet access. 9 Network ...

[Page 10] Dell Edge 5000 Series

Pin Signal 1 A(-) 2 B(+) 3 GND RS422/485 connector mapping Pin Signal 1 TXA(-) / A(-) 2 TXB(+) / B(+) 3 GND 4 RXA(-) 5 RXB(+) System—Bottom (DIP switches) Feature 1 RS422/RS485 port toggle switch Toggle between RS422 or RS485 standard. 2 RS422/RS48...

[Page 11] Dell Edge 5000 Series

System—Top Features 1 Mobile broadband antenna port (port one) Connect an antenna to increase the range and strength of the mobile broadband signals. 2 Micro-SIM card slot Insert a micro-SIM card to connect to a mobile broadband network. 3 Mobile...

[Page 12] Dell Edge 5000 Series

HDMI connector mapping Pin Signal 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2− 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1− 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0− 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock− 13 CEC 14 Res...

[Page 13] Dell Edge 5000 Series

System—Left Features 1 Power module expansion port Connect an external power module for increased power options. 2 24 V AC/DC power Phoenix connector Connect an 24 V AC/DC power connector to provide power to your system. 3 19.5 V DC power adapter ...

[Page 14] Dell Edge 5000 Series

24 V AC/DC power port 19.5 V DC power adapter port 14 ...

[Page 15] Dell Edge 5000 Series

System—Right Features 1 IO expansion port Connect an external expansion module for additional IO ports. 15 ...

[Page 16] Dell Edge 5000 Series

3 Setting up your Dell Edge Gateway WARNING: Before you begin any of the procedures in this section, read the safety information that shipped with your system. For additional best practices information, go to www.dell.com/regulatory_compliance. WARN...

[Page 17] Dell Edge 5000 Series

External antenna Use only the antenna(s) which have been approved by the applicant. Non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to a violation of FCC/IC limits and is prohibited. Installat...

[Page 18] Dell Edge 5000 Series

• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This eq...

[Page 19] Dell Edge 5000 Series

3. The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the eirp limits specied for point-to-point and non point-to-point operation as appropriate. 4. The worst-case tilt angle(s) necessary to remain complian...

[Page 20] Dell Edge 5000 Series

4. Install the WWAN antenna to enable the wireless connections—optional. 5. Connect a display to the Edge Gateway (if necessary). 20 ...

[Page 21] Dell Edge 5000 Series

6. Connect a keyboard and mouse if accessing the Edge Gateway directly. 7. Connect a grounding cable to the Gateway (if necessary). 8. Connect a SELV/limited energy circuit power source to the Edge Gateway and press the power button to turn it on. 24...

[Page 22] Dell Edge 5000 Series

9. If setting up the Edge Gateway for the rst time, complete the operating system setup. NOTE: The Edge Gateway is shipped with either Windows 10 Enterprise, Ubuntu Snappy, or Wind River Linux operating systems. NOTE: On Windows 10 OS, select Do...

[Page 23] Dell Edge 5000 Series

2. Drill four holes in the wall that correspond to the holes in the mounting bracket, then place the Edge Gateway against the wall and align the holes in the mounting brackets with the holes in the wall. 3. Tighten the screws to secure the Edge Gate...

[Page 24] Dell Edge 5000 Series

Mounting the Edge Gateway on a DIN rail The Edge Gateway can be mounted on a DIN rail. The DIN rail bracket mounts to the back of the Edge Gateway. 1. Align the screw holes on the DIN rail mount to the back of the Edge Gateway, place the screws on th...

[Page 25] Dell Edge 5000 Series

3. Mount the Edge Gateway on a DIN rail. 4. Secure the Edge Gateway to the DIN rail by pressing the latch. 25 ...

[Page 26] Dell Edge 5000 Series

Inserting a micro-SIM card and activating your mobile broadband CAUTION: Dell recommends that you insert the micro-SIM card before powering on the Edge Gateway. 1. Shut down your Edge Gateway. 2. Locate the micro-SIM card slot. 3. Use a paper clip or...

[Page 27] Dell Edge 5000 Series

b. Click the play button to connect to your HSPA+ network. NOTE: Click the information button to view the International Mobile Equipment Identity (IMEI) and Integrated Circuit Card Identier (ICCID) information. Click the stop to disconnect fr...

[Page 28] Dell Edge 5000 Series

Example: at+cgdcont=3,"IPV4V6","vzwinternet". NOTE: If the command runs successfully, the message OK appears. c. Congure the Network Control Mode with the at#ncm command. Example: at#ncm=1,3. d. Activate the Packet Data Protoco...

[Page 29] Dell Edge 5000 Series

Example: at+cgdcont=3,"IPV4V6","broadband". NOTE: If the command runs successfully, the message OK appears. d. Congure the Network Control Mode with the at#ncm command. Example: at#ncm=1,3. e. Activate the Packet Data Protocol ...

[Page 30] Dell Edge 5000 Series

4 Setting up your operating system CAUTION: To prevent operating system corruption from sudden power loss, use the operating system to gracefully shut down the Edge Gateway. Windows 10 LTSB 2015 Overview The Edge Gateway is shipped with Windows 10...

[Page 31] Dell Edge 5000 Series

Watchdog Timer The Watchdog Timer for Windows 10 IoT Enterprise LTSB 2015 is controlled via the BIOS setting. Enter the BIOS during boot by pressing F2. The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer. TPM Support Wi...

[Page 32] Dell Edge 5000 Series

Edge Gateway I/O Module GPIO Mapping The GPIOs on the external I/O Module for the Edge Gateway are behind PIC microcontroller. The PIC microcontroller is exposed to the host system and to the host OS as a USB-HID device. Software applications develo...

[Page 33] Dell Edge 5000 Series

Press Enter, the following text is displayed: Ubuntu 15.04 localhost.localdomain tty1 localhost login: ubuntu Password Last login: Mon Nov 2 16:47:43 UTC 2015 on tty1 Welcome to snappy Ubuntu Core, a transactionally updated Ubuntu * See http://ubuntu...

[Page 34] Dell Edge 5000 Series

returns Linux ubuntu.localdomain 3.19.0-47-generic #53-Ubuntu SMP Mon Jan 18 14:02:48 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Running command, (plano)ubuntu@localhost:~$ sudo snappy info returns Linux power5000.localdomain 3.19.0-47-generic #53-Ubun...

[Page 35] Dell Edge 5000 Series

Action Ubuntu Core 15 Ubuntu Core 16 remove cloud- init Adjust grub conguration $sudo mount –o remount,rw / $sudo vi /boot/grub/grub.cfg N/A Remount Ubuntu Snappy 16 root le system as read/write N/A Snappy 16 rootfs is Re...

[Page 36] Dell Edge 5000 Series

#echo 0 > /sys/class/gpio/gpio346/value Serial Port Serial device nodes mapping. Table 2. Serial device nodes mapping table. Port Type Connector Device Node RS232 DB9 /dev/ttyS6 RS422_485 5 pin terminal /dev/ttyS4 RS485 3 pin terminal /dev/ttyS5 ...

[Page 37] Dell Edge 5000 Series

Network Manager – Ubuntu Core 15 Network-Manager is a native Ubuntu Snappy Connection Manger, the application handles multiple network devices, provides detection and conguration for system to automatically connect to network. A command line ut...

[Page 38] Dell Edge 5000 Series

11. Run the $quit command to quit the bluetoothctl console. Network Manager – Ubuntu Core 16 Network-Manager is a native Ubuntu Snappy Connection Manger, the application handles multiple network devices, provides detection and conguration for s...

[Page 39] Dell Edge 5000 Series

10. Run the $connect <MAC address of bluetooth keyboard> command to connect the to the Bluetooth keyboard. 11. Run the $quit command to quit the bluetoothctl console. Flashing a new OS Image Pre-requisites • USB 2.0 or USB 3.0 ash drive (4...

[Page 40] Dell Edge 5000 Series

Flashing the BIOS Prerequisites • BIOS le. Download the le from www.dell.com/support. • USB 2.0 or USB 3.0 ash drive (4GB min) • Turn o the Edge Gateway has been turned o. 1. On a separate computer, unzip the BIOS update le th...

[Page 41] Dell Edge 5000 Series

Power On the Edge Gateway to boot into Wind River Linux OS. The Wind River Linux does not have a graphical user interface (GUI). Log into the OS on the terminal with the following default credentials. • root@WR-IDP-xxxx login: root (where xxxx is t...

[Page 42] Dell Edge 5000 Series

Wind River Linux Basic Functions Preinstalled Packages Run the root@WR-IDP-xxxx:~# rpm -qa command to list all the packages installed on the Wind River Linux OS. NOTE: If you are looking for a specic package, you have to pipe the output of the roo...

[Page 43] Dell Edge 5000 Series

TPM support (HW TPM module dependency) Run the root@WR-IDP-xxxx:~# tpm_statistic command displays the status of TPM service. If the TPM is functional and enabled in the BIOS, below would be the expected results, when tpm_statistic command is execute...

[Page 44] Dell Edge 5000 Series

• lo • wlan0 Network conguration and default setup The following commands can be used to congure dierent network interfaces on the system with Wind River Linux on it. Network conguration on Wind River Linux IDP 3.1 environment can be ...

[Page 45] Dell Edge 5000 Series

through the system. The issued IP addresses by the access point and eth1 interface are in the 192.168.1.x subnet. The default access point SSID for the access point is IDPDK-5591. The bridge conguration can be modied using LuCi web interface. ...

[Page 46] Dell Edge 5000 Series

Launch minicom terminal utility on the system with one of the USB ACM device port to identify that we have the correct USB ACM device for Telit LE910 device before conguring the device, e.g. below shows how to launch minicom with ttyACM1 as inter...

[Page 47] Dell Edge 5000 Series

Description: The following are a capture from a sample session that was performed on a Dell Edge Gateway platform with default Wind River Linux OS image to establish LTE connectivity using Verizon LE910 module and Verizon SIM card. The commands hig...

[Page 48] Dell Edge 5000 Series

Description: The following method can be used to disable or delete the WWAN connection that was setup using the descriptions mentioned in the previous sections. 1. Launch minicom as dened in the other sections and choose the appropriate ttyACM po...

[Page 49] Dell Edge 5000 Series

2. Add apn according to the SIM card operator. For e.g. "3gnet" for China Unicom root@WR-IDP-XXXX:~# uci set network.wwan.apn="3gnet" root@WR-IDP-XXXX:~# uci commit network root@WR-IDP-XXXX:~# uci get network.wwan.apn3gnet 3. Setu...

[Page 50] Dell Edge 5000 Series

Some of the detailed documentation on how to develop for Wind River Linux OS image based Gateway 5000 solution and how to utilize built in Developer Hub are available at www.intel.com/gatewaytraining please refer to that site for more details. The f...

[Page 51] Dell Edge 5000 Series

• Select the packages tab inside the IoT Developer Hub, search for iot-developer-hub package and select to update that package only, it is not necessary to update other packages at this time. Give few minutes for package to download and update. �...

[Page 52] Dell Edge 5000 Series

• Once the update of the OS is complete, the Gateway should reboot and now the system should be upgraded to the latest RCPL release available for the Gateway 5000 product at the Windshare repository. At this point the user should have an environme...

[Page 53] Dell Edge 5000 Series

• The package tab indicates installed packages on the platform, update to the packages can be performed and additional repository channels can be added through the developer hub portal. Common port mappings on Edge Gateway 5000 with Wind River OS ...

[Page 54] Dell Edge 5000 Series

The I/O module GPIO mapping and references will be provided as a separate technical sheet and article and will be released at the support web portal for user/customer reference. Edge Gateway I/O Module PCIe expansion mapping Description: The PCIe sl...

[Page 55] Dell Edge 5000 Series

Edge Gateway CAN Module Functions Description: The Edge Gateway supports an optional CAN module that is mounted inside the Gateway itself. The CAN module is enumerated to the OS as a USB device as USB HID device to the Linux kernel driver layer on t...

[Page 56] Dell Edge 5000 Series

5 System specications NOTE: Oerings may vary by country; not all congurations are available in all regions. Component types Component 5000 5100 PCB Standard FR4 Isola 370HR CPU Intel E3B25/E3827 Intel E3B25/E3827 Memory Dell-managed Dell-m...

[Page 57] Dell Edge 5000 Series

Memory 5000 5100 Type DDR3L DDR3L Memory channel Single/dual Single/dual Minimum memory 2 GB 2 GB Maximum system memory 8 GB 4 GB Drives and removable storage 5000/5100 Supported number of mSATA hard drives (maximum) 1 32GB M.2 Solid State Drive X 64...

[Page 58] Dell Edge 5000 Series

Mechanical and environmental specications Mounting Wall mounted Connector type SMA male Antenna color White Cable type Plenum rated low loss RG58 Cable color White Mounting bracket Swivel type (plastic) Mounting bracket length (approximate) 175 mm...

[Page 59] Dell Edge 5000 Series

Coaxial cable specication Jacket pullout 4.5 pound-force minimum on 76.2 mm (3 in) section at 12.7 mm (0.5 in) per minute Minimum bend radius 12.7 mm (0.5 in) static bend Leakage -90 dB Communications—WWAN antenna General specications Antenn...

[Page 60] Dell Edge 5000 Series

Mechanical and environmental specications Mounting bracket Swivel type (plastic) Mounting bracket length (approximate) 175 mm (6.89 in) Mounting bracket color Black Pig tail length 1000 mm (39.37 in) Coaxial cable specication Impedance 50 ± 2....

[Page 61] Dell Edge 5000 Series

Measured antenna peak gain (antenna only) Main antenna Auxiliary antenna Frequency (MHz) Horizontal (dBi) Vertical (dBi) Horizontal (dBi) Vertical (dBi) 698 0.09 0.63 1.19 1.12 704 -0.11 0.66 0.89 0.91 710 -0.27 0.60 0.51 0.78 716 -0.08 0.55 0.42 0...

[Page 62] Dell Edge 5000 Series

Measured antenna peak gain (antenna only) 900 1.71 1.00 2.13 0.94 915 1.65 1.03 1.87 0.82 925 1.57 1.16 1.61 0.74 940 1.30 1.36 1.24 0.60 960 1.43 1.31 0.98 0.69 1710 2.19 2.18 1.83 2.39 1730 2.25 2.29 1.66 2.36 1750 1.90 2.15 1.39 2.29 1770 1.33 1.9...

[Page 63] Dell Edge 5000 Series

Measured antenna peak gain (antenna only) 2400 1.29 1.91 1.85 1.63 2500 3.17 2.75 2.94 2.47 2515 3.11 2.62 2.78 2.47 2535 2.88 2.42 2.55 2.48 2555 2.51 2.09 2.18 2.46 2570 2.21 1.91 1.92 2.46 2570 2.21 1.91 1.92 2.46 2595 1.89 1.65 1.56 2.45 2620 1.6...

[Page 64] Dell Edge 5000 Series

5000/5100 Universal audio jack None USB 2.0 2 USB 3.0 1 CANBus (3–pin Phoenix connector) 1 Dimensions and weight NOTE: System weight and shipping weight are based on a typical conguration and may vary depending on PC conguration. A typical c...

[Page 65] Dell Edge 5000 Series

5000 5100 IO module Power module IP65 rugged enclosure Depth 72.7 mm (2.86 in) 83 mm (3.27 in) 56.2 mm (2.21 in) 72.7 mm (2.86 in) 91.8 mm (3.61 in) Environmental and operating conditions Environmental conditions—System Ingress protection rating I...

[Page 66] Dell Edge 5000 Series

Environmental requirements NOTE: Enclosure meets IP50 with the pre-installed PCIe blank bracket. System IP rating depends on the PCIe card IP rating. Temperature range: Operating (with a maximum temperature gradation of 15°C per hour) -30°C to 7...

[Page 67] Dell Edge 5000 Series

System ambient after altitude derating (°C) Maximum supported power dissipation (W) for 85°C or above still air rated PCIe cards Maximum supported power dissipation (W) for 70°C still air rated PCIe cards Maximum supported power dissipation...

[Page 68] Dell Edge 5000 Series

Environmental requirements NOTE: The maximum operating temperature is derated 1°C/305m (1000ft) above sea level altitude. Storage -15.20 m to 10,668 m (-50 ft to 35,000 ft) Environmental conditions - Enclosure Ingress protection rating IP65 NOTE: R...

[Page 69] Dell Edge 5000 Series

Maximum altitude 5000 5100 Operational -15.20 m to 5000 m (-50 ft to 16,404 ft) -15.20 m to 5000 m (-50 ft to 16,404 ft) Non-operational –15.2 to 10,668 m (–50 to 35,000 ft) –15.2 to 10,668 m (–50 to 35,000 ft) Power Power adaptor (optional) ...

[Page 70] Dell Edge 5000 Series

Brand Type Voltage Composition (for Edge Gateway 5000) SHUNWO & KTS CR2032 (for Edge Gateway 5000) 3 V Lithium PANASONIC BR2032 (for Edge Gateway 5100) 3 V Lithium NOTE: Dell recommends checking or replacing the coin-cell battery prior to operati...

[Page 71] Dell Edge 5000 Series

5000/5100 ProSupport extensions up to ve years, with next business day on-site service Available NOTE: For a copy of our guarantees or limited warranties, write to ‘Dell USA L.P., Attn: Warranties, One Dell Way, Round Rock, TX 78682’. For mo...

[Page 72] Dell Edge 5000 Series

6 I/O Module Overview The I/O module allows you to install a PCIe x1 card and adds additional ports to your Dell Edge Gateway. NOTE: The power module is required to be installed with the Dell Edge Gateway to enable and use the I/O expansion module. ...

[Page 73] Dell Edge 5000 Series

IO module—Top Features 1 Top release latch Push both the top and bottom release latches to disconnect the power module from the Edge Gateway. 2 USB 2.0 port For USB 2.0 devices. 3 USB 2.0 port For USB 2.0 devices. 4 GPIO port Connect a GPIO 8–pi...

[Page 74] Dell Edge 5000 Series

RS232 port on IO expansion module connector mapping Pin Signal Pin Signal 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND IO module—Bottom Features 1 Bottom release latch Push both the top and bottom release latches to disconnect the power mo...

[Page 75] Dell Edge 5000 Series

4. Align the power module guide pins to the power module port on the Edge Gateway and slide the power module toward the Edge Gateway until fully seated. 5. Ensure the top and bottom latches are locked to secure the module to the Edge Gateway. 75 ...

[Page 76] Dell Edge 5000 Series

6. Install the Edge Gateway and the IO module along with the power module at a desired location using a wall-mount bracket or the DIN rail mount. Wall mount bracket DIN rail mount 7. Connect to a power source, and press the power button. 76 ...

[Page 77] Dell Edge 5000 Series

NOTE: Connect a power cable to the 24 V AC/DC or 19.5 V DC power adapter port on the power module. NOTE: The power adapter and sealed lead-acid battery is sold separately. NOTE: To enable and use the IO expansion module, you must also install the pow...

[Page 78] Dell Edge 5000 Series

2. Remove the PCIe expansion card-slot cover. 3. Install the PCIe card into the PCIe expansion card slot on the IO expansion module and secure with a screw. 4. Replace the cover on the IO expansion module. 78 ...

[Page 79] Dell Edge 5000 Series

5. Tighten the screw that secures the cover to the IO expansion module. NOTE: Replace the dust caps on any unused ports and connectors. 79 ...

[Page 80] Dell Edge 5000 Series

7 Power Module Overview The power module allows you to connect additional power sources to your Dell Edge Gateway. The power module allows you to connect to all three power sources, that is, the 24V AC/DC, 19.5 VDC, and a battery. NOTE: The Power Mo...

[Page 81] Dell Edge 5000 Series

Power module—Front Features 1 Power status LED Indicates the power‑state of the power module and the Edge Gateway. 2 Battery status LED Indicates the power‑state of the attached battery. 81 ...

[Page 82] Dell Edge 5000 Series

Power module—Bottom Features 1 19.5 V DC power adapter port Connect a 19.5 V DC power adapter to provide power to your Edge Gateway. 2 24 V AC/DC power port Connect a 24 V AC/DC power source to power your Edge Gateway. 3 Sealed lead-acid battery ...

[Page 83] Dell Edge 5000 Series

24 V AC/DC power port Sealed lead-acid battery port 83 ...

[Page 84] Dell Edge 5000 Series

Power module—Top Features 1 Top release latch Push both the top and bottom release latches to disconnect the power module from the Edge Gateway. 84 ...

[Page 85] Dell Edge 5000 Series

Power module—Right Features 1 Edge Gateway expansion port Connect the power module to the Edge Gateway for increased power options and to power the IO expansion module. Setting up the power module WARNING: Before installing the power module, shut ...

[Page 86] Dell Edge 5000 Series

3. Align the power module guide pins to the power module port on the Edge Gateway and slide the power module until fully seated. 4. Ensure the top and bottom latches are locked to secure the module to the Edge Gateway. 5. Secure the power module to ...

[Page 87] Dell Edge 5000 Series

Wall mount bracket DIN rail 6. Connect the power sources and press the power button on the Edge Gateway. 87 ...

[Page 88] Dell Edge 5000 Series

NOTE: You can connect the power cable to the 24V AC/DC, 19 VDC, and a battery simultaneously. NOTE: The power adapter and sealed lead-acid battery are sold separately. NOTE: Installing the battery is optional. Dell recommends that you connect a seale...

[Page 89] Dell Edge 5000 Series

Environmental requirements NOTE: The maximum operating temperature is derated 1°C/305m(1000ft) above sea level altitude. Non-operating -40°C to 70 °C (-40°F to 158°F) Relative humidity (maximum): Operating (with maximum humidity gradation of 10...

[Page 90] Dell Edge 5000 Series

8 Enclosure Overview The rugged enclosure allows you to install the Dell Edge Gateway in harsh environment’s, like locations that are subjected to high temperature variation, dust particle, and humidity. Enclosure (optional) view Enclosure - Sid...

[Page 91] Dell Edge 5000 Series

Features 6 Cable tie-o (17) To prevent accidental cable disconnection, tie all cables to the cable tie-o guides. 7 Cable conduit openings (8) Route the cables through the conduits (1 inch and 0.75 inch diameter). 8 Primary ground (internal) C...

[Page 92] Dell Edge 5000 Series

4. Secure the enclosure to the wall bracket by using the rubber washers and screws. 5. Secure the enclosure mounting brackets to the Edge Gateway by using the screws. NOTE: Before attaching the brackets to the Edge Gateway, note the correct orientati...

[Page 93] Dell Edge 5000 Series

7. Connect the intrusion switch to the system. 8. Remove the desired conduit plugs on the bottom or the left side of the enclosure and install the wiring conduits. NOTE: To ensure that dust and water does not enter the enclosure, install a conduit ra...

[Page 94] Dell Edge 5000 Series

9. Route the cables through the conduits and connect the cables to the desired connectors. NOTE: To reduce the risk of accidental cable disconnection, tie all cables to the cable tie-o guides. 10. Close and securely latch the enclosure door. 94 ...

[Page 95] Dell Edge 5000 Series

95 ...

[Page 96] Dell Edge 5000 Series

9 Setting up the ZigBee dongle CAUTION: Do not connect the ZigBee dongle if the Edge Gateway is installed inside the enclosure. NOTE: Do not connect the ZigBee dongle to the internal USB port of the IO expansion module. 1. Shut down your Edge Gatewa...

[Page 97] Dell Edge 5000 Series

10 BIOS defaults System conguration 5000 5100 Integrated NIC Enable w/PXE Enable w/PXE Serial port Disable Disable SATA operation AHCI AHCI Drives Enable (SSD-1) Enable (SSD-1) SMART reporting Disable Disable USB conguration Enable (boot suppor...

[Page 98] Dell Edge 5000 Series

5000 5100 Password bypass Disable Disable Password changes Enable Enable TPM security Enabled Enabled Computrace® Deactivate Deactivate Chassis intrusion On (Silent) On (Silent) CPU XD support Enable Enable Admin setup lockout Disable Disable OROM k...

[Page 99] Dell Edge 5000 Series

POST behavior 5000 5100 Numlock LED Enable Enable Keyboard errors Enable Enable Adaptor warning N/A Enable Cloud desktop 5000 5100 Server lookup method DNS DNS Server name CDServer CDServer Server IP address 255.255.255.255 255.255.255.255 Server por...

[Page 100] Dell Edge 5000 Series

11 Other documents you may need Besides this Installation and Operations Manual, you may need to see the following guides available at https://www.dell.com/ support/manuals. • Dell Edge Device Manager Getting Started Guide • Dell SupportAssist Fo...