I3 International Ax47DC User Manual

[Page 1] i3 International Ax47DC

User Manual Please read this guide carefully before you install your Ax47DC. Keep this guide for future reference. Rev. 170322 Ax47DC i3 INTERNATIONAL INC. 1.866.840.0004 www.i3international.com Canada 780 Birchmount Road, Unit 16, Scarborough, ...

[Page 2] i3 International Ax47DC

2 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 Default IP: 192.0.0.16 Default Subnet Mask : 255.255.255.0. Default User Name: i3admin Default Password: i3admin Ax47DC User Manual COPYRIGHT © 2017 by i3 International, Inc. All rights reserved. No part of...

[Page 3] i3 International Ax47DC

3 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Table of Contents Introduction 5 Warnings and operation notes 6 Precautions 6 Power 7 Cleaning 7 Servicing 7 Routine Maintenance 7 Unpacking 8 Accessories 8 Dimensions & Parts Identification 9 In...

[Page 4] i3 International Ax47DC

Advance Settings 27 Video Adjustment 28 Motion Detection (edge) 28 Motion Setting 28 Motion Zone Area Setting 29 Store to SD Card 29 On Screen Display 30 Sending E-mail by MOTION 30 Privacy Zone (edge) 31 Privacy Zone Setting 31 Privacy Zon...

[Page 5] i3 International Ax47DC

5 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 1. Introduction Thank you for purchasing an i3 Ax47DC Door Count Dome Camera. i3’s Annexxus Ax47DC megapixel IP camera features 1.3MP video resolution. This dome camera comes with a fixed 2.1mm lens, provi...

[Page 6] i3 International Ax47DC

6 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 2. Warnings and operation notes Please read this guide carefully before you install the camera. Keep this guide for future reference. If the camera needs to be modified or repaired, contact a certified i3 I...

[Page 7] i3 International Ax47DC

7 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 2.2 Power This camera supports PoE power only. IEEE 802.3af Class 3, max load of 8.5W. Incorrect voltage may cause irreparable damage to the video camera and will effectively void the camera warranty. For P...

[Page 8] i3 International Ax47DC

8 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 3. Unpacking Ensure that the items received match those listed on the order form and the packing slip. In addition to this manual and a fully assembled camera, the dome camera packing box includes: 1. Dri...

[Page 9] i3 International Ax47DC

9 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 4. Dimensions & Parts Identification Ax47DC dome camera is designed for indoor installation in commercial environment specifically for Door Counting installations. The camera installation must comply wit...

[Page 10] i3 International Ax47DC

10 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 1. Mounting holes (x3) 2. Dome bubble housing / Dome cover 3. Screws securing the dome bubble housing to camera module (x3, silver) 4. Lexan bubble 5. Screws attaching camera module to the camera base (...

[Page 11] i3 International Ax47DC

11 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 5.1 Door Count Installation Requirements For accurate count, Ax47DC installation must comply with all requirements below: 1. Mounting height between 2.43m (8’) and 3.65m (12’) Above Finished Floor (AFF)...

[Page 12] i3 International Ax47DC

12 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 1. Prepare the surface for mounting. Use supplied guide pattern sticker to drill screw holes on the mounting surface. Insert plastic anchors. If routing cables from the back of the camera, cut a cable hol...

[Page 13] i3 International Ax47DC

13 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Pan Adjustment 0°~360° Horizontal Rotation 0°~350° (±175°) 5.4 Axis lens position adjustment Ax47DC dome camera is specifically designed for Door Countring installations in commercial indoor environme...

[Page 14] i3 International Ax47DC

14 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 5.5 Surface Mounting The camera installation must comply with installation requirements. See section 5.1 . 1. Attach the supplied Drill Template to the mounting surface. 2. Drill 3 (three) 4.5 mm (0.2�...

[Page 15] i3 International Ax47DC

15 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 5.6 Mounting w/ Ax61BB Back Box (optional) The Ax61BB is an optional extension back box for cable management and surface mounting. Ax61BB back box is also needed for pendant or horizontal wall mount instal...

[Page 16] i3 International Ax47DC

16 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 8. Connect the wiring. 9. Adjust the lens angle by rotating and panning the camera lens base. Do not over-rotate the camera lens beyond the stop point to avoid damage to the camera. See section 5.4 f...

[Page 17] i3 International Ax47DC

17 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 6.1 Hardware/Software Requirements The following requirements must be met to achieve a successful network connection with the Ax47DC IP camera. SRX-Pro Server • i3 SRX-Pro Version 3.3.3 or higher • La...

[Page 18] i3 International Ax47DC

18 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 c) Click Custom Level. Security Settings - Internet Zone window will be displayed. d) Scroll down to the ActiveX controls and plug-ins radio buttons and configure as follows: » Automatic prompting for A...

[Page 19] i3 International Ax47DC

19 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 8. Enter the new IP address and Subnet Mask of the camera in the Device(s) Communication Update area and click Update. The new camera IP address must match the original range of your SRX-Pro LAN or NIC1 ...

[Page 20] i3 International Ax47DC

20 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 Note: If you do not have VC++ 2008 Redistributable installed on your unit, you must do that first. Once VC++ 2008 has been downloaded and installed, click on the ActiveX plug-in link in the Download messag...

[Page 21] i3 International Ax47DC

21 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 5. In the Select IP Camera window, enter the default camera User Name and Password, then click Add. Selected camera will be added to the IP Camera list. 6. Assign the IP camera to the SRX-Pro video chann...

[Page 22] i3 International Ax47DC

22 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 6.7 Configuring Door Count in SRX-Pro IBefore configuring Door Count feature, connect Ax47DC to SRX-Pro by following instructions in the side panel on the right. 1. In SRX-Pro Server, click the Setup butt...

[Page 23] i3 International Ax47DC

23 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 7. Advanced Camera Setup via IE To access Annexxus camera’s advanced setup, go to Setup -> IP Camera tab, select the camera in the list of added IP cameras and click the Advanced Setup button or Web S...

[Page 24] i3 International Ax47DC

24 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 7.1 Basic Setup Click the Setup button to access Annexxus camera Setup features. You may switch to the Advanced Setup mode at any time by clicking the Advance Setup button in the bottom left-hand corner. T...

[Page 25] i3 International Ax47DC

25 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Network settings • DHCP: Enable or Disable to have the network automatically assign an IP address to the camera. • IP Address: Manually enter the camera’s IP address here. This option will not be av...

[Page 26] i3 International Ax47DC

26 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 Triple Video Streaming Annexxus 47DC cameras support triple H264/MJPEG streaming, each stream can be configured separately: • Primary Streaming (Stream 1) is used by SRX-Pro Server for video recording a...

[Page 27] i3 International Ax47DC

27 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd • VBR Max bit rate / CBR bit rate (for H264 codec): Set the video bit rate between 64-20000 kbit/s. The default value is dependent on the Resolution and Frame Rate. • H264 GOP (I-Frame Interval): (for...

[Page 28] i3 International Ax47DC

28 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 Video Adjustment • Brightness: adjust the image brightness level, Values range from 0% to 100%. • Contrast: adjust the image contrast level. Values range from 0% to 100%. • Saturation: adjust the im...

[Page 29] i3 International Ax47DC

29 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Motion Zone Area Setting • Set Enable Motion Detection to On. • Draw the Motion Detection area in the Preview window. To draw, position your mouse cursor inside the Preview window, left-click and ho...

[Page 30] i3 International Ax47DC

30 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 MJPEG codec to support this feature. • Record: Enable Record check box to save an *.mp4 video clip to the micro SD card each time motion is detected inside the motion detection area. Note: At least one ...

[Page 31] i3 International Ax47DC

31 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 7.4 Privacy Zone (edge) In the Privacy Zone setup tab, select an area that needs to be blocked off with a rectangle on Live View and from video recording because of privacy or other concerns. Up to 8 separ...

[Page 32] i3 International Ax47DC

32 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 7.5 Exposure The camera’s exposure settings can be adjusted in the Exposure setup tab. Exposure Mode > Auto Exposure Note: All Auto Exposure settings are disabled when Manual Exposure is enabled. • ...

[Page 33] i3 International Ax47DC

33 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd compensates for exposure in these spots to enhance overall video quality. This feature is especially helpful in preventing blinding of security cameras at night time from headlights and is widely used for n...

[Page 34] i3 International Ax47DC

34 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 After making any setting adjustments, remember to click the Save button to save any changes made. 7.6 SD Card (edge recording) Your Ax47DC camera supports edge video recording to a micro SD card for the p...

[Page 35] i3 International Ax47DC

35 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd » Continuous: This recording type will start recording after the event starts (e.g. Motion detected, Tamper event detected) and will continue recording until the event has finished. This recording type ca...

[Page 36] i3 International Ax47DC

36 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 SD Card LifeSpan Notification Setting • Enable: Check to enable micro SD card health notifications. Note that not all card manufacturers support this functionality. • OSD Enable: Check to enable On Sc...

[Page 37] i3 International Ax47DC

37 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 7.7 Recording/Schedule (edge) In Recording/Schedule tab, the user can configure a number of actions in response to detected camera events. The following events are supported and can be configured in this s...

[Page 38] i3 International Ax47DC

38 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 • Attach Image: This setting controls whether *.jpg snapshots are allowed to be attached to the outbound emails. Set to On or Off. Email Address List Configure up to three unique email recipients. Enable...

[Page 39] i3 International Ax47DC

39 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Arming Schedule Setting > DEFOCUS Defocus compares the sharpness of consecutive video frames. Defocus events can trigger a video clip or snapshot recording to the micro SD card. On- screen display and ema...

[Page 40] i3 International Ax47DC

40 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 Arming Schedule Setting > TAMPER Tamper event arming lets the user configure a custom schedule for video clip or snapshot recording to the micro SD card based on Tamper events. On-screen display and ema...

[Page 41] i3 International Ax47DC

41 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd 7.8 Communication Setup The Communication tab is used to configure network and communication settings on the camera as well as camera OSD settings. Note: Do not configure SNMP settings in this tab as these...

[Page 42] i3 International Ax47DC

42 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 • Event Settings: Configure camera’s event OSD settings. These settings apply to motion, Defocus, and tamper events as well as and micro SD card notification OSD. » Background Color: Set the on-scre...

[Page 43] i3 International Ax47DC

43 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Adding a User To add a new user, 1. Click Add User button. 2. Enter New Username 3. Enter new user Password 4. Re-enter password in the Confirm Password field. 5. Set user Permission to User or Operat...

[Page 44] i3 International Ax47DC

44 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 7.10 System Setup System Setup tab this section allows adjusting changing camera’s TV System to NTSC or PAL, adjusting camera’s date/time settings, updating the camera’s firmware, restarting the cam...

[Page 45] i3 International Ax47DC

45 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Restart/Reset Reminder: Default IP address is 192.0.0.16, default Subnet: 255.255.255.0. Default Username/Password are i3admin / i3admin • Click Restart Camera to restart your Annexxus-series camera and c...

[Page 46] i3 International Ax47DC

46 i3-TRNG-CAMS-Ax47DC-UM.indd Rev. 170322 7.11 Logs Note: Logs setup page is not available in IE v8 and IE v9. Use IE v10 or higher, or Firefox. Camera Logs tab allows searching for event occurrence by date, time and event type. Logs facilitate ...

[Page 47] i3 International Ax47DC

47 Rev. 170322i3-TRNG-CAMS-Ax47DC-UM.indd Features/Model Ax47DC Image System Image Sensor Progressive Scan CMOS 1/3” sensor Signal System NTSC/PAL Optical System Iris Control Auto Iris Focal Length 2.1mm F-stop Range (F-number) F1.8 Horizontal FO...

[Page 48] i3 International Ax47DC

i3 INTERNATIONAL INC. 1.866.840.0004 www.i3international.com Canada 780 Birchmount Road, Unit 16, Scarborough, ON, M1K 5H4 U.S.A. i3 America Inc. 4450 Witmer Industrial Estates Unit 4 Niagara Falls, NY 14305 ...