Amx AXT-CA10 Instruction Manual

[Page 1] AMX AXT-CA10

instruction manual Software Design XPress - Professional version 1.1 Programmer’s Guide ...

[Page 2] AMX AXT-CA10

Software License and Warranty Agreement LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. The AMX Software consists of generally av...

[Page 3] AMX AXT-CA10

Table of Contents i D XP-PRO v1.1 - Programmer’s Guide Table of Contents Introduction ...............................................................................................................1 New Features available within version 1.1 ........

[Page 4] AMX AXT-CA10

ii DXP-PRO v1.1 - Programmer’s Guide Table of Contents DXP-PRO Menu Bar ....................................................................................................... 14 File Menu ..............................................................

[Page 5] AMX AXT-CA10

Table of Contents iii D XP-PRO v1.1 - Programmer’s Guide Touch Panel Interfaces Dialog ........................................................................................ 46 Choose Touch Panel Theme Dialog ......................................

[Page 6] AMX AXT-CA10

iv DXP-PRO v1.1 - Programmer’s Guide Table of Contents Finishing a Project........................................................................................................... 69 Understanding the Report File ....................................

[Page 7] AMX AXT-CA10

Table of Contents v D XP-PRO v1.1 - Programmer’s Guide G4CC ................................................................................................................................... 90 HELP-ABOUT ........................................

[Page 8] AMX AXT-CA10

vi DXP-PRO v1.1 - Programmer’s Guide Table of Contents mtgmViewSchedule3 ....................................................................................................... 104 Polycom Bandwidth ..............................................

[Page 9] AMX AXT-CA10

Table of Contents vii D XP-PRO v1.1 - Programmer’s Guide TNadvancedControls ......................................................................................................... 116 TNcanvas .................................................

[Page 10] AMX AXT-CA10

viii DXP-PRO v1.1 - Programmer’s Guide Table of Contents String Output - Tandberg Keyboard ................................................................................ 138 String Output - Tandberg Keyboard CAPS .........................

[Page 11] AMX AXT-CA10

Introduction 1 DXP-PRO v1.1 - Programmer’s Guide Introduction Design XPress - Professional (DXP-PRO)™ is a software package developed to assist AMX dealers in quickly designing, installing, and programming a control system. The type of control ...

[Page 12] AMX AXT-CA10

Introduction 2 DXP-PRO v1.1 - Programmer’s Guide  Support for NI-700 NetLinx Integrated Controller This new controller is treated the same as any of the other NI Series of Integrated Controllers. If the project calls for more ports than the NI-...

[Page 13] AMX AXT-CA10

Introduction 3 DXP-PRO v1.1 - Programmer’s Guide  Support for i!-TimeManager This new support is added as a selectable option within the Integrated Applications dialog page. Enabling the Use i!-TimeManager option prompts you to select a time zo...

[Page 14] AMX AXT-CA10

Introduction 4 DXP-PRO v1.1 - Programmer’s Guide Supported Operating Systems  Windows 2000® (Service Pack 4 or greater)  Windows XP® Professional (Service Pack 1) Minimum System Hardware Requirements  Pentium 450 MHZ processor (Pentium 7...

[Page 15] AMX AXT-CA10

Introduction 5 DXP-PRO v1.1 - Programmer’s Guide The two Adobe Acrobat files included (in addition to this one) are:  The On-Site Installer’s Guide is intended for the equipment installer.  The User-Interface Guide describes the Touch Panel...

[Page 16] AMX AXT-CA10

Introduction 6 DXP-PRO v1.1 - Programmer’s Guide  Resource Management (RMS)  PictureFrame The AXD-CV6 has the same considerations as the other G3 panels, but it also does not support the following devices:  Audio Conferencing Supported Su...

[Page 17] AMX AXT-CA10

Introduction 7 DXP-PRO v1.1 - Programmer’s Guide Audio Conferencing Devices AMX NetLinx Integrated Controllers Cameras CD (Compact Disc) Players DVD (Digital Video Disc) Players • ClearOne XAP400 • ClearOne XAP800 • ClearOn...

[Page 18] AMX AXT-CA10

Introduction 8 DXP-PRO v1.1 - Programmer’s Guide Lighting MAX - Integrated Content Servers by AMX MAX-MMS and MAX-IMS media servers are supported for G4 touch panels only, via Ethernet control. DXP-PRO treats these devices essentially the sa...

[Page 19] AMX AXT-CA10

Introduction 9 DXP-PRO v1.1 - Programmer’s Guide MP3 Players Plasma Displays Serial-Interface Devices User Interfaces Video Cassette Recorder (VCR) If multiple MAX-MMS or MAX-IMS servers are used in a project, each server must have its own uni...

[Page 20] AMX AXT-CA10

Introduction 10 DXP-PRO v1.1 - Programmer’s Guide Video Conferencing Devices Video Projection Devices • Polycom VS4000 • Polycom VSX8000 • Tandberg Tandberg 2500 • Tandberg Tandberg 6000 The supported Polycom Videoconference units are...

[Page 21] AMX AXT-CA10

Introduction 11 DXP-PRO v1.1 - Programmer’s Guide User Information Splash-screen This dialog appears the first time DXP-PRO is launched, and prompts you to enter the user information that will be used to identify the designer of the DXP-PRO projec...

[Page 22] AMX AXT-CA10

Introduction 12 DXP-PRO v1.1 - Programmer’s Guide Project Selection List The Project Selection List is displayed on the DXP-PRO Main Screen (FIG. 1), along with the Main menu and the Create New Project, Open Project, Copy Project, Delete Project, ...

[Page 23] AMX AXT-CA10

Introduction 13 DXP-PRO v1.1 - Programmer’s Guide Project Selection List Context Menu Right-click anywhere inside the Project Selection List (on the Main Screen) to open the Project Selection List context menu, containing shortcuts to several proj...

[Page 24] AMX AXT-CA10

Introduction 14 DXP-PRO v1.1 - Programmer’s Guide Copy Project dialog Click on the Copy Project command button (on the Main Screen) to invoke the Copy Project dialog and save a copy of the selected file under a new name. Use the fields in this dia...

[Page 25] AMX AXT-CA10

Introduction 15 DXP-PRO v1.1 - Programmer’s Guide DXP-PRO maintains all of its projects in a single database. To move a project from one DXP-PRO installation to another (for example moving a project from your desktop computer to your laptop), you...

[Page 26] AMX AXT-CA10

Introduction 16 DXP-PRO v1.1 - Programmer’s Guide Before You Begin The first step in defining the system is to run the Design XPress - Professional (DXP-PRO) application. This Windows ® based wizard should be run in the office well in advance of...

[Page 27] AMX AXT-CA10

Introduction 17 DXP-PRO v1.1 - Programmer’s Guide  Warning on duplicate IP Addresses: Alerts you to the assignment of duplicate IP Address to a device being controlled via an Ethernet connection. All IP Addresses being used by Ethernet-capable...

[Page 28] AMX AXT-CA10

Introduction 18 DXP-PRO v1.1 - Programmer’s Guide When creating a new project it is important to go through each dialog in order, using the Next>> button. This helps to insure that no information is missed and that the project configuration ...

[Page 29] AMX AXT-CA10

Using the DXP-PRO Wizard 19 D XP-PRO v1.1 - Programmer’s Guide Using the DXP-PRO Wizard Design Xpress - Professional (DXP-PRO) uses a Project Wizard to step you through the process of designing a control system. To launch the Wizard, click the C...

[Page 30] AMX AXT-CA10

Using the DXP-PRO Wizard 20 DXP-PRO v1.1 - Programmer’s Guide Launching the DXP-PRO Project Wizard Design XPress - Professional (DXP-PRO) uses a Project Wizard to step you through the process of designing and configuring a business-room oriented c...

[Page 31] AMX AXT-CA10

Using the DXP-PRO Wizard 21 D XP-PRO v1.1 - Programmer’s Guide  Choose Touch Panel Text Colors (page 51)  Input Names (page 51)  Switcher Inputs/Outputs (page 52)  Channel Preset Categories (page 55)  Channel Presets (page 56)  ...

[Page 32] AMX AXT-CA10

Using the DXP-PRO Wizard 22 DXP-PRO v1.1 - Programmer’s Guide System Information Dialog The first dialog in the Project Wizard is the System Information dialog (FIG. 2). This dialog contains the information used by Design XPress Professional (DXP-...

[Page 33] AMX AXT-CA10

Using the DXP-PRO Wizard 23 D XP-PRO v1.1 - Programmer’s Guide  Click the Add button to add a device to the list, via the Device Configuration dialog. The Device Configuration dialog is used to add or edit devices in the Device Information Li...

[Page 34] AMX AXT-CA10

Using the DXP-PRO Wizard 24 DXP-PRO v1.1 - Programmer’s Guide Adding a Device to the Project To add a device to your system, click the Add button in the System Information dialog. This opens the Device Configuration dialog - Device Data tab. In t...

[Page 35] AMX AXT-CA10

Using the DXP-PRO Wizard 25 D XP-PRO v1.1 - Programmer’s Guide 7. Use the up and down arrows to adjust the IR pulse time (in .10-second increments) in the IR Pulse field. The default setting is .5 seconds. 8. Open the IR Mapping tab of the Devic...

[Page 36] AMX AXT-CA10

Using the DXP-PRO Wizard 26 DXP-PRO v1.1 - Programmer’s Guide  It is first necessary to understand that the NI-700 is limited to direct communication via 2 available Serial ports. If more Serial devices are added to a project that requires dire...

[Page 37] AMX AXT-CA10

Using the DXP-PRO Wizard 27 D XP-PRO v1.1 - Programmer’s Guide  The above example uses 3 NXC-COM2 cards for communication to the external Serial devices. If any of the other Master devices (NI-Series and ME260/64) are selected, then there wi...

[Page 38] AMX AXT-CA10

Using the DXP-PRO Wizard 28 DXP-PRO v1.1 - Programmer’s Guide Adding a MAX-IMS or MMS Server to the Project To add the MAX device to your system, click the Add button in the System Information dialog. This opens the Device Configuration dialog - D...

[Page 39] AMX AXT-CA10

Using the DXP-PRO Wizard 29 D XP-PRO v1.1 - Programmer’s Guide Duplicating a Device DXP-PRO supports duplicating existing source devices and their settings via the Duplicate button on the System Information dialog. Use the Duplicate feature to m...

[Page 40] AMX AXT-CA10

Using the DXP-PRO Wizard 30 DXP-PRO v1.1 - Programmer’s Guide  Control Configuration tab: The options in this tab are used to configure the AMX IR port to properly transmit the IR signal to the AV equipment. This tab requires that you know how...

[Page 41] AMX AXT-CA10

Using the DXP-PRO Wizard 31 D XP-PRO v1.1 - Programmer’s Guide  Source Type: Click the down-arrow to open a drop-down list of available device types (Compact Disc Player, Digital Satellite System, Digital Video Disc Player, etc). Click to se...

[Page 42] AMX AXT-CA10

Using the DXP-PRO Wizard 32 DXP-PRO v1.1 - Programmer’s Guide  Control Logic: Select a Control Logic option from this drop-down list, if applicable.  The IR Data section allows you to configure a number of settings for IR controlled devices....

[Page 43] AMX AXT-CA10

Using the DXP-PRO Wizard 33 D XP-PRO v1.1 - Programmer’s Guide How to setup external cameras (using Camera and Video Conference source types) The development of an external camera type is used in tandem with a video conferencing unit. You must f...

[Page 44] AMX AXT-CA10

Using the DXP-PRO Wizard 34 DXP-PRO v1.1 - Programmer’s Guide 7. For an indirect connection type, select AXlink for the Control Method.  Click the down-arrow adjacent to the Control Logic field.  Select from the list of indirect camera contro...

[Page 45] AMX AXT-CA10

Using the DXP-PRO Wizard 35 D XP-PRO v1.1 - Programmer’s Guide Selecting a G4CC Source Type only configures the DXP-PRO application to be enabled to function with G4CC-enabled touch panels. To configure: 1. From the System Information dialog, cl...

[Page 46] AMX AXT-CA10

Using the DXP-PRO Wizard 36 DXP-PRO v1.1 - Programmer’s Guide Device Configuration dialog - IR Mapping tab The options in the IR Mapping tab (FIG. 5) help to insure that the button you press on the touch panel does what you expect. IR files, espec...

[Page 47] AMX AXT-CA10

Using the DXP-PRO Wizard 37 D XP-PRO v1.1 - Programmer’s Guide Removing a Mapped Function 1. Click on the button with the three left facing arrows, "<<<", and the IR Function Name will be deleted and the Channel will be return...

[Page 48] AMX AXT-CA10

Using the DXP-PRO Wizard 38 DXP-PRO v1.1 - Programmer’s Guide  IR Pulse Time - the length of time the IR signal is on and is being transmitted (CTON).  Time Gap Between IR Pulses - the length of time between IR pulses. This is usually used ...

[Page 49] AMX AXT-CA10

Using the DXP-PRO Wizard 39 D XP-PRO v1.1 - Programmer’s Guide Device Configuration dialog - Power Control tab The options in the Power Control tab (FIG. 7) allow you to configure power control to the AV equipment. This tab requires that you kno...

[Page 50] AMX AXT-CA10

Using the DXP-PRO Wizard 40 DXP-PRO v1.1 - Programmer’s Guide Device Considerations when using New Features When working with several of the new features available within DXP-PRO version 1.1, it is necessary to note some special device considerati...

[Page 51] AMX AXT-CA10

Using the DXP-PRO Wizard 41 D XP-PRO v1.1 - Programmer’s Guide Which Screens? Dialog The Which Screens? dialog (FIG. 8) is available for selection from the Jump To drop-down list after pressing the Next >> button from the System Informatio...

[Page 52] AMX AXT-CA10

Using the DXP-PRO Wizard 42 DXP-PRO v1.1 - Programmer’s Guide  Switcher Inputs/Outputs (page 52)  Channel Preset Categories (page 55)  Channel Presets (page 56)  CD Titles (page 57)  DVD Titles (page 59)  Relay Control (page 59) �...

[Page 53] AMX AXT-CA10

Using the DXP-PRO Wizard 43 D XP-PRO v1.1 - Programmer’s Guide  The Room Name/Location/Owner fields must be populated with descriptive information that better specifies the location being monitored and queried. Information must be entered in...

[Page 54] AMX AXT-CA10

Using the DXP-PRO Wizard 44 DXP-PRO v1.1 - Programmer’s Guide Lighting Presets Dialog The Lighting Presets dialog (FIG. 10) sets up the available presets for the Lighting system selected on the System Information page. There is a maximum of nine p...

[Page 55] AMX AXT-CA10

Using the DXP-PRO Wizard 45 D XP-PRO v1.1 - Programmer’s Guide  The Button # refers to the button number or scene number the Design XPress system is to emulate when communicating to the lighting system.  For the AMX Radia, the button # is...

[Page 56] AMX AXT-CA10

Using the DXP-PRO Wizard 46 DXP-PRO v1.1 - Programmer’s Guide Note for Radia Lighting Systems On Radia lighting systems, channels 1-128 represent Radia lighting presets 1-128. If a channel is on, then the corresponding preset is on. However, on st...

[Page 57] AMX AXT-CA10

Using the DXP-PRO Wizard 47 D XP-PRO v1.1 - Programmer’s Guide The Touch Panel Interfaces table can be sorted by clicking on any of the three column header cells (Panel ID, Display Name and Type). Clicking the header cells toggles between sortin...

[Page 58] AMX AXT-CA10

Using the DXP-PRO Wizard 48 DXP-PRO v1.1 - Programmer’s Guide  Scrolling - allows you to scroll through the menu buttons using left and right-arrow buttons.  Static - all menu buttons are displayed - no scrolling involved.  Use PopUp Page...

[Page 59] AMX AXT-CA10

Using the DXP-PRO Wizard 49 D XP-PRO v1.1 - Programmer’s Guide All of these selections are dependent on these devices first being defined. As an example, if no lighting was previously defined, the Lights Button checkbox will be greyed-out and u...

[Page 60] AMX AXT-CA10

Using the DXP-PRO Wizard 50 DXP-PRO v1.1 - Programmer’s Guide Choose Touch Panel Background dialog To select a background for your custom touch panel theme: 1. Click on one of the background names in the list on the left side of the screen.  A ...

[Page 61] AMX AXT-CA10

Using the DXP-PRO Wizard 51 D XP-PRO v1.1 - Programmer’s Guide Choose Touch Panel Text Colors dialog To select the touch panel text colors: 1. Select Text On and Text Off state colors from the top color palette. 2. Click and drag each color sele...

[Page 62] AMX AXT-CA10

Using the DXP-PRO Wizard 52 DXP-PRO v1.1 - Programmer’s Guide To edit the Display Text field information 1. Select a Default Input Name from the list and make any necessary changes within the Display Text field (lower portion of the page). 2. Cli...

[Page 63] AMX AXT-CA10

Using the DXP-PRO Wizard 53 D XP-PRO v1.1 - Programmer’s Guide  Input Number - This is a read-only field that changes to reflect the currently selected Switcher input number (from the upper table).  Source - This drop-down list provides yo...

[Page 64] AMX AXT-CA10

Using the DXP-PRO Wizard 54 DXP-PRO v1.1 - Programmer’s Guide Switcher Outputs tab Within the Outputs section, in addition to assigning devices to outputs of the switcher, you can assign a display device as the primary display. When selecting a so...

[Page 65] AMX AXT-CA10

Using the DXP-PRO Wizard 55 D XP-PRO v1.1 - Programmer’s Guide Channel Preset Categories Dialog This dialog (FIG. 17) allows you to create up to 8 different preset categories. For example, you might create a presets category for Sports channels,...

[Page 66] AMX AXT-CA10

Using the DXP-PRO Wizard 56 DXP-PRO v1.1 - Programmer’s Guide Channel Presets for...Dialogs The Channel Preset dialogs are the same for any TV type channel preset. This includes TV tuners, Cable TV tuners, DSS tuners, PVR tuners and VCR tuners. Th...

[Page 67] AMX AXT-CA10

Using the DXP-PRO Wizard 57 D XP-PRO v1.1 - Programmer’s Guide You can also define your own custom presets. If you select None as the button image, the text placed in the Preset Name text box will be displayed on the touch panel button. CD Title...

[Page 68] AMX AXT-CA10

Using the DXP-PRO Wizard 58 DXP-PRO v1.1 - Programmer’s Guide Editing CD Information 1. Select a CD title from the list to populate the Artist and Disc Title fields, where you can enter new information as desired. 2. Click the Update button to up...

[Page 69] AMX AXT-CA10

Using the DXP-PRO Wizard 59 D XP-PRO v1.1 - Programmer’s Guide 2. Click the down-arrow (in the Setting to receive CD data from freedb.org section of the dialog) to view a list of available CD drives on your PC. 3. Select the drive that you plac...

[Page 70] AMX AXT-CA10

Using the DXP-PRO Wizard 60 DXP-PRO v1.1 - Programmer’s Guide The Display Name text box is used to label the relay group on the touch panel. Changing a Display Name can result in DXP-PRO displaying a warning pop-up message informing you that &quo...

[Page 71] AMX AXT-CA10

Using the DXP-PRO Wizard 61 D XP-PRO v1.1 - Programmer’s Guide Adding a Relay Control Definition to the list 1. Enter a name for the Relay in the Display Name text field. Then select a type of Control Logic. 2. Click the Add button to add the ne...

[Page 72] AMX AXT-CA10

Using the DXP-PRO Wizard 62 DXP-PRO v1.1 - Programmer’s Guide  Each navigation and routing macro may contain up to 50 steps, the following sections outlines more specific information on using macros.  These Macros would have been previously ...

[Page 73] AMX AXT-CA10

Using the DXP-PRO Wizard 63 D XP-PRO v1.1 - Programmer’s Guide Using the Macro Steps for....dialog to edit the macro steps Select a macro and click the Edit button in the Macros section of the Navigation and Routing Macros dialog to open the Mac...

[Page 74] AMX AXT-CA10

Using the DXP-PRO Wizard 64 DXP-PRO v1.1 - Programmer’s Guide The items in this dialog include:  Macro Steps table: This table lists all of the steps currently included in this macro. Use the Up/Down arrow buttons to rearrange the order of the ...

[Page 75] AMX AXT-CA10

Using the DXP-PRO Wizard 65 D XP-PRO v1.1 - Programmer’s Guide  Clear: Click to clear the macro function from a selected macro step, without removing the step from the list.  OK/Cancel: Click OK to accept the changes and return to the prev...

[Page 76] AMX AXT-CA10

Using the DXP-PRO Wizard 66 DXP-PRO v1.1 - Programmer’s Guide Adding a New System Macro to the Project 1. Click the Add button to open the Macro Steps dialog. 2. Enter a name for the new macro in the Macro Name text field. 3. Click the Apply butt...

[Page 77] AMX AXT-CA10

Using the DXP-PRO Wizard 67 D XP-PRO v1.1 - Programmer’s Guide  Select New from the Project Selection List context menu. Opening an Existing Design XPress - Professional Project There are three ways to open an existing Design XPress - Professi...

[Page 78] AMX AXT-CA10

Using the DXP-PRO Wizard 68 DXP-PRO v1.1 - Programmer’s Guide Exporting a DXP-PRO Project There are two ways to export an existing Design XPress - Professional project file. Both methods have the same result; they each invoke the Export dialog, wh...

[Page 79] AMX AXT-CA10

Using the DXP-PRO Wizard 69 D XP-PRO v1.1 - Programmer’s Guide Finishing a Project Once you have gone through all of the configuration screens, it is time to build your project. 1. Click the Finish button at the bottom of any screen (A in FIG. 2...

[Page 80] AMX AXT-CA10

Using the DXP-PRO Wizard 70 DXP-PRO v1.1 - Programmer’s Guide Understanding the Report File The report file (Report.html), automatically generated by DXP-PRO (after the project is finished) should be used as a step-by-step guide to installing the ...

[Page 81] AMX AXT-CA10

Using the DXP-PRO Wizard 71 D XP-PRO v1.1 - Programmer’s Guide Uploading a completed touch panel file to a target panel 1. Double-click on the desired touch panel file (listed in the User Interface folder of the Workspace tab (D in FIG. 25). Thi...

[Page 82] AMX AXT-CA10

Using the DXP-PRO Wizard 72 DXP-PRO v1.1 - Programmer’s Guide 3. Note the IP Address and IP port values used by the NetLinx Master for communication. 4. From the TPD4 Main menu, select Transfer > Connect to open the Connect dialog (FIG. 26). 5. ...

[Page 83] AMX AXT-CA10

Using the DXP-PRO Wizard 73 D XP-PRO v1.1 - Programmer’s Guide 11. Click on the radio button next to the desired transfer option for the files being sent to the panel. 12. Click Send to return to the main TPD4 application, open the Transfer Statu...

[Page 84] AMX AXT-CA10

Using the DXP-PRO Wizard 74 DXP-PRO v1.1 - Programmer’s Guide The NetLinx Studio Project Building the project can be accomplished by compiling Main.axs, or selecting Build Active System. Be sure that you are compiling the project for NetLinx. The ...

[Page 85] AMX AXT-CA10

Using the DXP-PRO Wizard 75 D XP-PRO v1.1 - Programmer’s Guide To use FTP to transfer these files to the system's NetLinx Master, you'll need to know the Master's IP Address: 1. Launch Windows Explorer and navigate to the director...

[Page 86] AMX AXT-CA10

Using the DXP-PRO Wizard 76 DXP-PRO v1.1 - Programmer’s Guide ...

[Page 87] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 77 D XP-PRO v1.1 - Programmer’s Guide DXP-PRO Touch Panel Channel Maps The channel maps are generated in TPD4. Once you have created a touch panel project: 1. Open a TPD4 template file. 2. From the Main menu, clic...

[Page 88] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 78 DXP-PRO v1.1 - Programmer’s Guide O CH Port: 0, CH Code: 524 P CH Port: 0, CH Code: 525 { [ CH Port: 0, CH Code: 526 } ] CH Port: 0, CH Code: 527 | \ CH Port: 0, CH Code: 543 Caps CH Port: 0, CH Code: 558 A CH Po...

[Page 89] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 79 D XP-PRO v1.1 - Programmer’s Guide Cable Menu Cable Tuner Cable Video CABLE_MENU_BUTTON CH Port: 1, CH Code: 200 CABLE_GUIDE_BUTTON CH Port: 1, CH Code: 201 CABLE_FAV_BUTTON CH Port: 1, CH Code: 202 CAB...

[Page 90] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 80 DXP-PRO v1.1 - Programmer’s Guide Camera CD Changer CD Changer Advanced CAMERA_UP CH Port: 1, CH Code: 210 CAMERA_DN CH Port: 1, CH Code: 211 CAMERA_LT CH Port: 1, CH Code: 212 CAMERA_RT CH Port: 1, CH Code: 21...

[Page 91] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 81 D XP-PRO v1.1 - Programmer’s Guide CD List CD List - Title Only CD_SELECTDISC_BUTTON CH Port: 3, CH Code: 57 AD Port: 3, AD Code: 57 CD_POWER_BUTTON CH Port: 3, CH Code: 25 CDADVANCED_SELECT_BUTTON CH Port: 3, ...

[Page 92] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 82 DXP-PRO v1.1 - Programmer’s Guide CD List Action Picker CD List Keyboard Channel Preset Categories Channel Presets CDACTION_EDIT_BUTTON CH Port: 3, CH Code: 26 CDACTION_EXIT_BUTTON CH Port: 3, CH Code: 28 CDACTIO...

[Page 93] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 83 D XP-PRO v1.1 - Programmer’s Guide ClearOne Incoming ClearOne Info ClearOne Main CHANPRE_12_BUTTON CH Port: 3, CH Code: 111 AD Port: 3, AD Code: 111 CHANPRE_18_BUTTON CH Port: 3, CH Code: 117 AD Port: 3, AD Cod...

[Page 94] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 84 DXP-PRO v1.1 - Programmer’s Guide ClearOne Presets ClearOne TH2 Main CLEARONE_OUTPUT_SEL_7 CH Port: 4, CH Code: 7 CLEARONE_OUTPUT_SEL_8 CH Port: 4, CH Code: 8 CLEARONE_OUTPUT_SEL_10 CH Port: 4, CH Code: 178 CLEAR...

[Page 95] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 85 D XP-PRO v1.1 - Programmer’s Guide ClearOne TH2 Speed Dial Conference Volume Controls CLEARONE_TH2_REDIAL CH Port: 4, CH Code: 155 CLEARONE_TH2_VIEW CH Port: 4, CH Code: 157 CLEARONE_TH2_CONNECT CH Port: 4, C...

[Page 96] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 86 DXP-PRO v1.1 - Programmer’s Guide Debug Display Display Advanced DEBUG_GENERAL_BUTTON CH Port: 3, CH Code: 250 DEBUG_PATH_BUTTON CH Port: 3, CH Code: 251 DEBUG_HANDLER_BUTTON CH Port: 3, CH Code: 252 DEBUG_MAIN_B...

[Page 97] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 87 D XP-PRO v1.1 - Programmer’s Guide Display Inputs Display Video DISPLAY_VOLUP_BUTTON CH Port: 2, CH Code: 1 DISPLAY_VOLDN_BUTTON CH Port: 2, CH Code: 2 DISPLAY_VOLMUTE_BUTTON CH Port: 2, CH Code: 3 DISPLAY_ASPE...

[Page 98] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 88 DXP-PRO v1.1 - Programmer’s Guide DSS Menu DSS Tuner DSS Video DSSMNU_MENU_BUTTON CH Port: 2, CH Code: 169 DSSMNU_GUIDE_BUTTON CH Port: 2, CH Code: 170 DSSMNU_FAV_BUTTON CH Port: 2, CH Code: 171 DSSMNU_INFO_BUTTO...

[Page 99] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 89 D XP-PRO v1.1 - Programmer’s Guide DVD DVD Changer Advanced DVD_PLAY_BUTTON CH Port: 2, CH Code: 11 DVD_STOP_BUTTON CH Port: 2, CH Code: 12 DVD_PAUSE_BUTTON CH Port: 2, CH Code: 13 DVD_SKIPREV_BUTTON CH Port: 2...

[Page 100] AMX AXT-CA10

DXP-PRO Touch Panel Channel Maps 90 DXP-PRO v1.1 - Programmer’s Guide DVD Menu DVD Video G4CC HELP-ABOUT KBKeyboard DVD_MENU_UP_BUTTON CH Port: 2, CH Code: 21 DVD_MENU_DOWN_BUTTON CH Port: 2, CH Code: 22 DVD_MENU_LEFT_BUTTON CH Port: 2, CH Code:...