GIRBAU HS-6008 Advanced Operation Instructions

[Page 1] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 Advanced Operation Instructions for washers COIN CONTROL GIRBAU, S.A. Crta de Manlleu, km. 1 08500 VIC (Barcelona) • SPAIN Tel. 34 93 8861100 Fax 34 93 8860785 girbau...

[Page 2] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 Model From serial # High Speed HS-6008 2.080.884 HS-6013 2.110.200 HS-6017 2.120.320 EH020 1.430.001 EH030 1.460.021 EH040 1.470.060 Medium Speed MS-610 2.020.001 MS-613 2.030.001 MS-617 2.040.001 ...

[Page 3] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 3 Index SAFETY INSTRUCTIONS INDEX ........................................................................................................................................... 3 1. DESCRIPTION 1.1 Characteri...

[Page 4] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 4 Advanced Mode 3. MODIFICATION MODE. The MODIFICATION mode offers some menus, which allow the modification of programs contents, the price management of the programs, the modification of operating p...

[Page 5] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 5 Advanced Mode 3.2.1. Master program EXECUTION LEVEL TEMP. DOSING ROTATION ROTATION TIME EXTRACT EXTRACT TIME PHASE Ph L C / F d r rt E Et 1 Y / N 1…3 n.p. 1 1...3 1...6 1......

[Page 6] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 6 Advanced Mode 3.2.2. Default program contents. CE Configuration HS & MS models Pr - 1. SUPER WASH  31 min. Pr - 2. COLOR FAST. PERM. PRESS  31 min. Ph Ph L C d r ...

[Page 7] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 7 Advanced Mode 3.2.4. Default program contents. USA Configuration Models EH020 & EM025. SP-I, SP-2, SP-3. Pr - 1. SUPER WASH  32 min. Pr - 2. WHITE  28 min. Ph Ph L F d...

[Page 8] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 8 Advanced Mode 3.2.6. Phases definition. PHASES DEFINITION 1 2 3 4 5 6 Pre-wash. Optional execution phase. Washing. Obligatory execution phase. The mixing of hot and cold water is permitted an...

[Page 9] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 9 Advanced Mode 3.2.8. Modification of a program Access the MODIFICATION mode (section 3.1) The display will indicate Pro. Press the 1 key to access the PROGRAMMING menu. The display will indicate Pr-...

[Page 10] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 10 Advanced Mode Dosing. Permits to activate or deactivate dosing that appear in the master table. OPTIONS MEANING d-0 Without dosing d-1 Dosing of pre-wash detergent d-2 Dosing of wash detergent ...

[Page 11] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 11 Advanced Mode Bath drain The draining of the water from the washing machine is done through the activation of the drain system, either by pump or by gravity at the same time the drum is rotating. Optio...

[Page 12] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 12 Advanced Mode 3.4. DEMO menu. Operating mode with program accelerator It allows executing one of the four COIN programs with the possibility of reducing the program time. Program to facilitate mainte...

[Page 13] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 13 Advanced Mode 3.6. MOD menu. Modification of operating parameters. The Mod menu allows the modification of the operation parameters of all the programs. The modifications carried out from Mod menu ...

[Page 14] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 14 Advanced Mode External dosing Adapts the operation of the control panel leds to the washer operation. Option Ed-1 has to be programmed only if washer uses wash products form an external dosing installat...

[Page 15] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 15 Advanced Mode OPTIONS MEANING SP-0 Without suds prevention SP-1 First level of suds prevention SP-2 Second level of suds prevention SP-3 Third level of suds prevention The 2 / 4 keys allow...

[Page 16] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 16 Advanced Mode 3.7. Ncod menu. Modification of the access code to MODIFICATION mode. As it is described in section 3.1, the access to MODIFICATION mode is restricted with an access code. This code ca...

[Page 17] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 17 Advanced Mode 4.1.1. Setting clock time and day of the week. Access to the MODIFICATION menu. Section 3.1. Display shows Pro. Press key 2 seven times. In the display reports CASH, DEMO, INFO, Mod, Ncod...

[Page 18] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 18 Advanced Mode Example: Example of the weekly programming of the time band BAND 1 BAND 2 BAND 3 BAND 4 DIA TIME RATE TIME RATE TIME RATE TIME RATE 1-Mo 00-12 h. LOW 12-18 h. MId 18-2...

[Page 19] GIRBAU HS-6008

Cod. 429704 Rev. 02/0606 19 Advanced Mode Programming of the remaining programs. Select by 2 and 4 keys the program that you want to modify. Repeat the procedure: programming the price of a program. Push the 1 key to program the ...