Asus RS161-E4 PA2 User Manual

Download or browse on-line these Operation & User’s Manual for Asus RS161-E4 PA2 Server.

Asus RS161-E4 PA2 Manual Information:

This manual for Asus RS161-E4 PA2, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 126 pages, and the size of the file at download is 6.82 Mb. The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] Asus RS161-E4 PA2

RS161-E4/PA2 1U Rackmount Server User Guide ...

[Page 2] Asus RS161-E4 PA2

ii Copyright 2006© ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in...

[Page 3] Asus RS161-E4 PA2

iii Contents Notices ................................................................................................vii Safety information .............................................................................viii About this guide ..............

[Page 4] Asus RS161-E4 PA2

iv Contents 2.9 Removable components ........................................................... 2-19 2.9.1 System fans .............................................................. 2-19 2.9.2 Device fan ................................................

[Page 5] Asus RS161-E4 PA2

v Contents 5.3 Main menu ................................................................................ 5-14 5.3.1 System Date [Day xx/xx/xxxx] ................................. 5-14 5.3.2 System Time [xx:xx:xx] .......................................

[Page 6] Asus RS161-E4 PA2

vi Contents 6.2.4 Rebuilding a RAID set .................................................. 6-7 6.2.5 Deleting a RAID array .................................................. 6-8 6.2.6 Clearing the disk data ..............................................

[Page 7] Asus RS161-E4 PA2

vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept a...

[Page 8] Asus RS161-E4 PA2

viii Safety information Electrical Safety • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable ...

[Page 9] Asus RS161-E4 PA2

ix About this guide Audience This user guide is intended for system integrators, and experienced users with at least basic knowledge of conguring a server. Contents This guide contains the following parts: 1. Chapter 1: Product Introduction This...

[Page 10] Asus RS161-E4 PA2

x References Refer to the following sources for additional information, and for product and software updates. 1. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management util...

[Page 11] Asus RS161-E4 PA2

1- ASUS RS161-E4/PA2 This chapter describes the general features of the chassis k i t . I t includes sections on front panel and rear panel specications. Chapter 1 Product introduction ...

[Page 12] Asus RS161-E4 PA2

Chapter 1: Product introduction1-12 1.1 System package contents Check your system package for the following items. Chassis ASUS R11 1U rackmount chassis Motherboard ASUS KFN4-DRE motherboard Components 500W Single power supply 1 x Optic...

[Page 13] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 1-13 1.2 System specications The ASUS RS161-E4/PA2 is a 1U barebone server system featuring the ASUS KFN4-DRE motherboard. The server supports dual Socket-F(1207) 2200 Series AMD Opteron TM , plus other l...

[Page 14] Asus RS161-E4 PA2

Chapter 1: Product introduction1-14 1.3 Front panel features The barebone server displays a simple yet stylish front panel with easily accessible features. The power and reset buttons, LED indicators, location switch, optical drive, and...

[Page 15] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 1-15 1.5 Internal features The barebone server includes the basic components as shown. 1. PCI Slot 2. Rear fans 3. ASUS KFN4-DRE motherboard 4. Power supply 5. System fans (40mm x 56mm) x 4 6. System fans (40mm x 28mm) x 2 7. ...

[Page 16] Asus RS161-E4 PA2

Chapter 1: Product introduction1-16 1.6 LED information HDD Access LED LAN2 LED LAN1 LED Message LED Location LED Power LED LED Display status Description Power LED ON System power ON HDD Access LED OFF Blinking No activity Read/write data into the ...

[Page 17] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 2- This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. Chapter 2 Hardware setup ...

[Page 18] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-2 2.1 Chassis cover 2.1.1 Removing the cover 1. Use a Phillips screwdriver to remove the screw on each front end of the top cover. 4. Firmly hold the cover and slide it toward the rear panel for ...

[Page 19] Asus RS161-E4 PA2

2-3ASUS RS161-E4/PA2 2.1.2 Installing the cover 1. Position the cover on top of the chassis with the thumbscrews on the rear, and leaving a gap of about half an inch from the front panel. 3. Slide the cover toward the front until it snaps in plac...

[Page 20] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-4 R KFN4-DRE 2.2 Motherboard information Place eleven (11) screws into the holes indicated by circles to secure the motherboard to the chassis. Place this side towards the rear of the chassis Refer to "Chapter 4 Mo...

[Page 21] Asus RS161-E4 PA2

2-5ASUS RS161-E4/PA2 2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount Socket F designed for the AMD® Opteron® 2200 Ser...

[Page 22] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-6 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and f o r efinger to a 100º angle (A), then push the PnP cap from the load plate window ...

[Page 23] Asus RS161-E4 PA2

2-7ASUS RS161-E4/PA2 The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. Close the load plate (A), then push the ...

[Page 24] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-8 2.3.2 Installing the heatsink and fan-duct The AMD Opteron™ socket-F(1207) 2200 series processors require a specially designed heatsink and fan-duct to ensure optimum thermal condition and performance...

[Page 25] Asus RS161-E4 PA2

2-9ASUS RS161-E4/PA2 2.4 System memory 2.4.1 Overview The motherboard comes with eight 240-pin Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. The following gure illustrates the location of the sockets: For CPU 1 ...

[Page 26] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-10 2.4.2 Memory Congurations You may install 256 MB, 512 MB, 1 GB, 2 GB, or 4 GB registered ECC DDR2 DIMMs into the DIMM sockets using the memory configurations in this section. • For dual-channel con...

[Page 27] Asus RS161-E4 PA2

2-11ASUS RS161-E4/PA2 2.4.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. To install a DIMM: 1...

[Page 28] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-12 2.5 Hard disk drives The system supports two hot-swap Serial ATAII hard disk drives. To install a hot-swap SATAII HDD: 1. Release a drive tray by pushing the spring lock to the right, then pulling the tra...

[Page 29] Asus RS161-E4 PA2

2-13ASUS RS161-E4/PA2 5. Carefully insert the drive tray and push it all the way to the depth of the bay until just a small fraction of the tray edge protrudes. 6. Push the tray lever until it clicks, and secures the drive tray i...

[Page 30] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-14 2.6 Expansion slot 2.6.1 Installing an expansion card to the riser card bracket The barebone server comes with a riser card bracket. You need to remove the bracket if you want to install PCI Express x16 expansion cards...

[Page 31] Asus RS161-E4 PA2

2-15ASUS RS161-E4/PA2 5. Install a PCI Express x16 card to the bracket, then secure the card with the screw you removed earlier. 2.6.2 Reinstalling the riser card bracket To reinstall the riser card bracket: 1. Take note of the holes o...

[Page 32] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-16 2.6.3 Conguring an expansion card After installing the expansion card, congure it by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 5...

[Page 33] Asus RS161-E4 PA2

2-17ASUS RS161-E4/PA2 2.7 Cable connections Pre-connected system cables 1. 24-pin SSI power connector (from power supply to motherboard) 2. 4-pin SSI power connector (power supply to motherboard) 3. SATAII backplane power connector (from power sup...

[Page 34] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-18 2.8 SATA backplane cabling Connects the SATAII cable from SATA1 on the MB Connects the SMBus cable from the MB Connects the fan cable from FRNT_FAN4 on the MB Connect the system fan cables Connect the SATAII HDDs C...

[Page 35] Asus RS161-E4 PA2

2-19ASUS RS161-E4/PA2 2.9 Removable components You may need to remove previously installed system components when installing or removing system devices, or when you need to replace defective components. This section tells ho...

[Page 36] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-20 2.9.2 Device fan To uninstall the device fan: 2. Lift the fan, then set aside. 1. Re m o v e t h e f a n - D u c t , t h a n disconnect the device fan cable f r o m t h e c o n n e c t o r o n t h e moth...

[Page 37] Asus RS161-E4 PA2

2-21ASUS RS161-E4/PA2 2.9.3 Device fan with dummy case The device fan for the memory module(s) comes with a dummy case that allows it to t in the fan cage. Follow these instructions when replacing this fan. 1. Uninstall the fan following the in...

[Page 38] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-22 2.9.4 Power supply module To uninstall the power supply module: 1. Disconnect all the power cables connected to the motherboard and other system devices. 2. Use a Phillips (cross) screwdriver to remove the ...

[Page 39] Asus RS161-E4 PA2

2-23ASUS RS161-E4/PA2 2.9.5 Optical drive To uninstall the optical drive: 2. I n s e r t t h e o p t i c a l d r i v e em e rge n cy e j ect p in t o th e emergency eject pin hole until the drive tray ejects. 3. Pull out half of...

[Page 40] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-24 6. Remove two metal bracket screws and screws on the other side of the drive. Keep the screws for later use. 7. Pull the metal bracket to the direction of the arrow until its pegs disengage from the d...

[Page 41] Asus RS161-E4 PA2

2-25ASUS RS161-E4/PA2 2.9.6 Motherboard To uninstall the motherboard: 1. Disconnect all the pre-connected cables from the motherboard. See section “2.7 Cable connections” for illustration. 2. Uninstall all the devices from the motherboard incl...

[Page 42] Asus RS161-E4 PA2

Chapter 2: Hardware setup2-26 To reinstall the motherboard: 1. Firmly hold the motherboard by the sides and insert it into the chassis. 2. Carefully adjust the motherboard until the rear panel ports fit in place. 4. Reconne...

[Page 43] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 2- Thi s ch ap te r de sc ri be s ho w to install the optional components and devices into the barebone server. Chapter 3 Installation options ...

[Page 44] Asus RS161-E4 PA2

Chapter 3: Installation options3-2 3.1 Rackmount rail kit items If you have the rackmount rail kit, it contains two pairs of rails (one pair for each side of the barebone system), and eight (8) pairs of nut-and-bolt type screws. 3.2 Rack rails ass...

[Page 45] Asus RS161-E4 PA2

3-3ASUS RS161-E4/PA2 3.3 Attaching the rails to the rack To attach the rails to the rack: 1. Select one unit of space (1U) on the rack where you wish to install the barebone server. 2. Remove the screws from the 1U space on th...

[Page 46] Asus RS161-E4 PA2

Chapter 3: Installation options3-4 3.4 Rackmounting the server To mount the server to the rack: 1. Firmly hold the server on both sides and insert the rear panel side to the front end of the rack rail, then carefully push the server all the way to...

[Page 47] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-1 This chapter gives inforamtion about the motherboard that comes with the server. This chapter includes the motherboard layout, jumper settings, and connector locations. Chapter 4 Motherboard Info ...

[Page 48] Asus RS161-E4 PA2

4-2 Chapter 4: Motherboard information 4.1 Motherboard layout Socket F (1207) Socket F (1207) DDR2 DIMM_D2 (64 bit,240-pin module) DDR2 DIMM_C2 (64 bit,240-pin module) DDR2 DIMM_D1 (64 bit,240-pin module) DDR2 DIMM_C1 (64 bit,240-pin module) DDR2 DIM...

[Page 49] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-3 4.1.1 Layout Contents Slots/Sockets Page 1. CPU sockets 4-2 2. DDR2 DIMM sockets 4-2 3. PCI Express x16 slot 4-2 4. PCI slot 4-2 Jumpers Page 1. Clear RTC RAM (CLRTC1) 4-4 2. Keyboa...

[Page 50] Asus RS161-E4 PA2

4-4 Chapter 4: Motherboard information 4.2 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing t...

[Page 51] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-5 3. Gigabit LAN1 controller setting (3-pin LAN1_EN1) This jumper allows you to enable or disable the onboard Broadcom ® BCM5721 Gigabit LAN1 controller. Set to pins 1-2 to activate the Gigabit LAN feature. 2. Keyb...

[Page 52] Asus RS161-E4 PA2

4-6 Chapter 4: Motherboard information 4. Gigabit LAN2 controller setting (3-pin LAN2_EN1) This jumper allows you to enable or disable the onboard Broadcom ® BCM5721 Gigabit LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN ...

[Page 53] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-7 7. VGA Graphics controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI Rage XL video graphics controller. Set to pins 1-2 to enable the video graphics controller. 6. BIOS Recovery (3-...

[Page 54] Asus RS161-E4 PA2

4-8 Chapter 4: Motherboard information 4.3 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY1) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect t...

[Page 55] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-9 2. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) The onboard IDE connectors are for Ultra DMA 133/100/66 signal cables. There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray. Connect the blu...

[Page 56] Asus RS161-E4 PA2

4-10 Chapter 4: Motherboard information 3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) Supported by the NVIDIA ® nForce4™ chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows u...

[Page 57] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-11 5. Storage add-on card activity LED connector (4-pin HDLED1) This connector is for the storage add-on card cable connected to the SCSI or SATA add-on card. The read or write activities of any device connected to the SCSI...

[Page 58] Asus RS161-E4 PA2

4-12 Chapter 4: Motherboard information 7. Front and rear fan connectors (3-pin FRNT_FAN1, FRNT_FAN2, FRNT_ FAN3, FRNT_FAN4, FRNT_FAN5, FRNT_FAN6, REAR_FAN1, REAR_FAN2, REAR_FAN3, REAR_FAN4) The fan connectors support cooling fans of 350mA~200...

[Page 59] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-13 8. Serial port connector (10-1 pin COM2) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. 9. ATX...

[Page 60] Asus RS161-E4 PA2

4-14 Chapter 4: Motherboard information 10. Power Supply SMBus connector (5-pin PSUSMB1) This connector allows you to connect SMBus (System Management Bus) devices to the power supply unit. Devices communicate with an SMBus host and/or other SMBus ...

[Page 61] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-15 12. BMC and Mini PCI connectors (200-pin BMCSOCKET1) This connectors is for the ASUS server management card (SO-DIMM socket for ASMB3-SOL). R KFN4-DRE KFN4-DRE BMCSOCKET Connector BMCSOCKET1 ...

[Page 62] Asus RS161-E4 PA2

4-16 Chapter 4: Motherboard information 13. System panel auxiliary connector (20-pin AUX_PANEL1) This connector supports several server system functions. • Chassis Intrusion connector (3-pin CASEOPEN) This lead is for a chassis with an intrusio...

[Page 63] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 4-17 14. System panel connector (20-pin PANEL1) This connector supports several chassis-mounted functions. • System power LED (Green 3-pin POWERLED) This 3-pin connector is for the system power LED. Connect the chassis power...

[Page 64] Asus RS161-E4 PA2

4-18 Chapter 4: Motherboard information ...

[Page 65] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-1 This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Chapter 5 BIOS Setup ...

[Page 66] Asus RS161-E4 PA2

5-2 Chapter 5: BIOS setup 5.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS AFUDOS (Updates the BIOS in DOS mode using a bootable oppy disk...

[Page 67] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-3 5.1.2 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can...

[Page 68] Asus RS161-E4 PA2

5-4 Chapter 5: BIOS setup 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support CD to the bootable oppy disk you created earlier. 3. Boot the system in DOS mode, then at the prompt type: afudos/[lename] where [lename] ...

[Page 69] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-5 5. The utility returns to the DOS prompt after the BIOS update process is completed. Reboot the system from the hard disk drive. A:\>afudos /RS161E4.ROM /pbnc AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB...

[Page 70] Asus RS161-E4 PA2

5-6 Chapter 5: BIOS setup 5.1.3 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. You can update a corrupted BIOS ...

[Page 71] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-7 The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS le. Recovering the BIOS from the support CD To recover the BIOS from the support C...

[Page 72] Asus RS161-E4 PA2

5-8 Chapter 5: BIOS setup Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update VX.XX.XX. 3. The ASUS Update utility is c...

[Page 73] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-9 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility ...

[Page 74] Asus RS161-E4 PA2

5-10 Chapter 5: BIOS setup Updating the BIOS through a BIOS le To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The...

[Page 75] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-11 5.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program whe...

[Page 76] Asus RS161-E4 PA2

5-12 Chapter 4: BIOS setup V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Main AdvancedServerSecurityBootExit  Use[ENTER],[TAB]  or...

[Page 77] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-13 SystemDate[Mon,06/27/2005] SystemTime[08:52:30] FloppyA:�...

[Page 78] Asus RS161-E4 PA2

5-14 Chapter 4: BIOS setup 5.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 5.3.1 System Date [Day xx/xx/xxxx] Allows you to set the system date. 5....

[Page 79] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-15 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Main IDEConguration OnBoardPCIIDEController [Both] IDEDMATransfer [Enabled]  CongurationnVidiaRAI...

[Page 80] Asus RS161-E4 PA2

5-16 Chapter 4: BIOS setup RAID Option ROM [Disabled] Enables or disables the NVIDIA ® RAID option ROM. Conguration options: [Disabled] [Enabled] The following items appear when the RAID Option ROM is Enabled. Tertiary Master as RAID [...

[Page 81] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-17 5.3.5 Primary, Secondary, Tertiary, Fourth, Fifth, and Sixth IDE Master/Slave The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press...

[Page 82] Asus RS161-E4 PA2

5-18 Chapter 4: BIOS setup PIO Mode [Auto] Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Sets the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [U...

[Page 83] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-19 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Main Processor Information ***CPU1: Brand Dual-Core AMD Opteron(tm) Processor 2210 ID/uCode 040F12h/None Speed...

[Page 84] Asus RS161-E4 PA2

5-20 Chapter 4: BIOS setup 5.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the sy...

[Page 85] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-21 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced ChipsetConguration  NorthBridgeConguration  SouthBridgeConguration →← Select Screen...

[Page 86] Asus RS161-E4 PA2

5-22 Chapter 4: BIOS setup V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced MemoryConguration MemclockMode [Auto] MemoryHoleRemapping [Enabled] →← Select Screen ...

[Page 87] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-23 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced ECCConguration DRAMECCEnable [Enabled]  ChipKillECCMode [Disabled] DRAMADDRESSPARITY�...

[Page 88] Asus RS161-E4 PA2

5-24 Chapter 4: BIOS setup SouthBridge Conguration The SouthBridge conguration menu allows you to change the Southbridge settings. CPU Spread Spectrum [Disabled] Sets or disables the processor spread spectrum. Conguration options: [Disable...

[Page 89] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-25 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced PCI/PnPConguration ResetESCDData [No] Plug&PlayO/S [No] PaletteSnooping [Disabled]...

[Page 90] Asus RS161-E4 PA2

5-26 Chapter 4: BIOS setup OnBoard PCIE LAN Boot ROM [Enabled] Allows you to enable or disable the option ROM in the onboard PCI Express LAN controller. Conguration options: [Disabled] [Enabled] 5.4.4 USB Conguration The items in this menu all...

[Page 91] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-27 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced PeripheralDevicesConguration OnBoardFloppyController [Enabled] SerialPort1Address [3F8/IRQ4]...

[Page 92] Asus RS161-E4 PA2

5-28 Chapter 4: BIOS setup V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced ACPIConguration ACPI2.0Features [No] HeadlessMode [Disabled] ACPIEMSSupport [Disabled...

[Page 93] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-29 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. BIOS SETUP UTILITY Advanced APMConguration RestoreOnACPowerLoss [PowerOff] ResumebyPS/2Keyboard [Enabled] Resum...

[Page 94] Asus RS161-E4 PA2

5-30 Chapter 4: BIOS setup Resume By PME# [Disabled] When set to [Enabled], the system enables the PME to generate a wake event while the computer is in Soft-off mode. Conguration options: [Disabled] [Enabled] Resume by RTC [Disabled] A...

[Page 95] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-31 V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc. 3.3VVoltage [3.328V] 5VVoltage [4.922V] 5VSB [4.920V] VBATVoltage [2.976V] 12VVoltage [11.932V] F1 General Help  F...

[Page 96] Asus RS161-E4 PA2

5-32 Chapter 4: BIOS setup Soft. Physical [No] Conguration options: [Yes] [No] TPM Device [Disabled] Enables or Disables TPM device. Conguration options: [Disabled] [Enabled] The TPM Owner item appear when the TPM Device set [Enabled]. TPM Oene...

[Page 97] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-33 5.5.1 Remote Access Conguration The items in this menu allows you to congure the Remote Access features. Select an item then press <Enter> to display the conguration options. Remote Access [Disabled] Enables or...

[Page 98] Asus RS161-E4 PA2

5-34 Chapter 4: BIOS setup Serial port number [COM1] Selects the serial port for console redirection. Conguration options: [COM1] [COM2] Baudrate [57600] Sets the baudrate. Conguration options: [115200] [57600] [38400] [19200] [9600] F...

[Page 99] Asus RS161-E4 PA2

ASUS RS161-E4/PA2 5-35 Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. To ...

[Page 100] Asus RS161-E4 PA2

5-36 Chapter 5: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Limited] This item allows you to select the access restriction to the Setup i...