Cisco MWR 2941 Command Reference Manual

[Page 1] Cisco MWR 2941

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco MWR 2941 Router Command Reference Release 15.0(1)MR March 2011 Text Pa...

[Page 2] Cisco MWR 2941

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY K...

[Page 3] Cisco MWR 2941

iii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 CONTENTS CONTENTS About This Guide xv Document Revision History xv Objectives xv Audience xv Conventions xvi Related Documentation xvi Obtaining Docu...

[Page 4] Cisco MWR 2941

iv Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ip rtp header-compression 1-56 clear l2protocol-tunnel counters 1-57 clear link-protection statistics 1-58 clear pw-udp vc counters 1-59 clear spanning-...

[Page 5] Cisco MWR 2941

Contents v Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 ethernet cfm ais link-status 1-108 ethernet cfm ais link-status global 1-109 ethernet cfm alarm 1-110 ethernet cfm cc enable level vlan 1-112 ethernet...

[Page 6] Cisco MWR 2941

Contents vi Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 fair-queue (class-default) 1-165 fair-queue (policy-map class) 1-167 id (CFM) 1-169 idle-pattern 1-170 ima-group 1-172 instance (VLAN) 1-174 ...

[Page 7] Cisco MWR 2941

Contents vii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 match vlan (QoS) 1-233 maximum meps 1-235 mep archive hold-time 1-236 mep crosscheck mpid vlan 1-238 mep mpid 1-240 mip auto-create 1-241 mo...

[Page 8] Cisco MWR 2941

Contents viii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 network-clock-select wait-to-restore-timeout 1-287 payload-size 1-288 period (CFM-AIS-link) 1-290 ping ethernet 1-291 ping ethernet mpid vlan 1...

[Page 9] Cisco MWR 2941

Contents ix Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 ptp update-calendar 1-357 ql-enabled rep segment 1-358 queue-limit 1-359 recovered-clock slave 1-362 recovered-clock recovered 1-363 rep admin vl...

[Page 10] Cisco MWR 2941

Contents x Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 set ip precedence (policy-map) 1-426 set ip precedence (route-map) 1-427 set ip precedence tunnel 1-429 set ip tos (route-map) 1-431 set network-clock...

[Page 11] Cisco MWR 2941

Contents xi Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 show ethernet cfm maintenance-points remote 1-499 show ethernet cfm maintenance-points remote crosscheck 1-502 show ethernet cfm maintenance-points remote de...

[Page 12] Cisco MWR 2941

Contents xii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 show pw-udp vc 1-600 show rep topology 1-602 show spanning-tree mst 1-605 show xconnect 1-610 signaling 1-614 snmp-server enable traps ethernet ...

[Page 13] Cisco MWR 2941

Contents xiii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 switchport vlan mapping 1-662 switchport vlan mapping enable 1-664 synchronous mode 1-666 termination 1-667 traceroute ethernet 1-668 tunnel de...

[Page 14] Cisco MWR 2941

Contents xiv Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 ...

[Page 15] Cisco MWR 2941

xv Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 About This Guide This section describes the objectives, audience, organization, and conventions of this software command reference. It contains the following sections: •...

[Page 16] Cisco MWR 2941

xvi Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 About This Guide • System administrators who are familiar with the fundamentals of router-based internetworking, but who may not be familiar with Cisco IOS software •...

[Page 17] Cisco MWR 2941

xvii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 About This Guide – Cisco MWR 2941 Mobile Wireless Edge Router Hardware Installation Guide – Regulatory Compliance and Safety Information for the Cisco MWR 2941 Router...

[Page 18] Cisco MWR 2941

xviii Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 About This Guide ...

[Page 19] Cisco MWR 2941

1 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR This document contains an alphabetical listing of new and revised commands specific to the Cisco MWR 2941 router....

[Page 20] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 2 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • clear ethernet cfm traceroute-cache • clear ip rtp header-compression • clear l2protocol-tunnel cou...

[Page 21] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 3 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • ethernet cfm domain level • ethernet cfm enable • ethernet cfm enable (interface) • ethernet cfm glob...

[Page 22] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 4 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • ip cef load-sharing algorithm • ip load-sharing • ip local interface • ip multicast-routing •...

[Page 23] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 5 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • neighbor (OSPF) • neighbor remote-as (BGP) • network-clock clear wait-to-restore • network-clock eec ...

[Page 24] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 6 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • private-vlan synchronize • protocol (ATM) • pseudowire-class • ptp announce • ptp boundary �...

[Page 25] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 7 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • sabit • sender-id (CFM-srv) • service-policy • service-policy (class-map) • service-policy (policy...

[Page 26] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 8 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • show cns config outstanding • show cns config stats • show cns event connections • show cns even...

[Page 27] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 9 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • show network-clocks • show network-clocks synchronization • show platform hardware • show policy-map ...

[Page 28] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR 10 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 • switch l2trust • switch tail-drop accounting • switchport access vlan • switchport backup • ...

[Page 29] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR ais 11 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 ais To enable the Alarm Indication Signal (AIS) function for a specific maintenance association, use the a...

[Page 30] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR ais 12 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Examples The following example shows how to enable the AIS function at level 5 with a transmission period ...

[Page 31] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR alarm 13 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 alarm To configure an alarm when fault alarms are enabled, use the alarm command in Ethernet connectivit...

[Page 32] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR alarm 14 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 If a higher priority defect occurs after a lower priority defect has triggered an alarm but before the a...

[Page 33] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR atm ilmi-keepalive 15 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 atm ilmi-keepalive To enable Interim Local Management Interface (ILMI) keepalives, use the ...

[Page 34] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR atm vc-per-vp 16 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 atm vc-per-vp To set the maximum number of virtual channel identifier (VCIs) to support per virt...

[Page 35] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR atm vc-per-vp 17 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Table 1 lists the possible VCI ranges and corresponding VPI ranges. Examples The following examp...

[Page 36] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR backup delay 18 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 backup delay To specify how long a backup pseudowire (PW) virtual circuit (VC) should wait before...

[Page 37] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR backup delay 19 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Router(config-if-xconn)# backup delay 0 never Router(config-if-xconn)# exit Router(config-if)# ex...

[Page 38] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR backup peer 20 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 backup peer To specify a redundant peer for a pseudowire (PW) virtual circuit (VC), use the backup...

[Page 39] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR backup peer 21 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Router(config)# interface atm1/0 Router(config-if)# xconnect 10.0.0.1 100 pw-class mpls Router(con...

[Page 40] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bandwidth (policy-map class) 22 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 bandwidth (policy-map class) To specify or modify the bandwidth allocated for a c...

[Page 41] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bandwidth (policy-map class) 23 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Usage Guidelines Configuring a Policy Map Use the bandwidth command when you conf...

[Page 42] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bandwidth (policy-map class) 24 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 The router converts the specified bandwidth to the nearest multiple of 1/255 (ESR...

[Page 43] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bfd all-interfaces 25 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 bfd all-interfaces To enable Bidirectional Forwarding Detection (BFD) for all interfaces pa...

[Page 44] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bfd all-interfaces 26 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Router(config-router)# bfd all-interfaces Router(config-router)# end Related Commands Comma...

[Page 45] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bfd interval 27 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 bfd interval To set the baseline Bidirectional Forwarding Detection (BFD) session parameters on a...

[Page 46] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR bfd interval 28 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Related Commands Command Description bfd all-interfaces Enables BFD for all interfaces for a BFD ...

[Page 47] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cbr 29 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cbr To configure the constant bit rate (CBR) for the ATM circuit emulation service (CES) for an ATM perma...

[Page 48] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cbr 30 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Related Commands Command Description pvc Creates or assigns a name to an ATM PVC, specifies the encapsulat...

[Page 49] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cdp enable 31 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cdp enable To enable Cisco Discovery Protocol (CDP) on an interface, use the cdp enable command in ...

[Page 50] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cdp enable 32 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Related Commands Command Description cdp run Reenables CDP on a Cisco device. cdp timer Specifies h...

[Page 51] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cem-group 33 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cem-group To create a circuit emulation (CEM) channel from one or more time slots of a T1 or E1 line...

[Page 52] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cem-group 34 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Router(config-if)# cem 0 Router(config-if-cem)# xconnect 10.10.10.10 200 encapsulation mpls Router(c...

[Page 53] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class (policy-map) 35 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 class (policy-map) To specify the name of the class whose policy you want to create or chan...

[Page 54] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class (policy-map) 36 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Usage Guidelines Policy Map Configuration Mode Within a policy map, the class (policy-map) ...

[Page 55] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class (policy-map) 37 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Fragments A default traffic class is marked as a fragment within a policy map class stateme...

[Page 56] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class (policy-map) 38 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 policy-map Creates or modifies a policy map that can be attached to one or more interfaces...

[Page 57] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class cem 39 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 class cem To configure CEM interface parameters in a class that is applied to CEM interfaces togethe...

[Page 58] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class cem 40 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Related Commands Command Description dejitter-buffer Specifies the size of the dejitter buffer used ...

[Page 59] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map 41 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 class-map To create a class map to be used for matching packets to a specified class, use the class-...

[Page 60] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map 42 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Usage Guidelines Use the class-map command to specify the class that you will create or modify to me...

[Page 61] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map 43 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 match access-group Configures the match criteria for a class map on the basis of the specified ACL....

[Page 62] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map type control 44 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 class-map type control To create an Intelligent Services Gateway (ISG) control class ma...

[Page 63] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map type control 45 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 ! policy-map type control MY-POLICY class type control MY-FORWARDED-USERS event sessio...

[Page 64] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map type traffic 46 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 class-map type traffic To create or modify a traffic class map, which is used for match...

[Page 65] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR class-map type traffic 47 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 policy-map type service mp3 class type traffic CLASS-ACL-101 authentication method-l...

[Page 66] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm ais 48 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ethernet cfm ais To clear a maintenance endpoint (MEP) or server maintenance endp...

[Page 67] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm ais 49 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 The following examples show how to clear a MEP of an AIS defect condition: Router# clea...

[Page 68] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm errors 50 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ethernet cfm errors To clear continuity check error conditions logged on a dev...

[Page 69] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm errors 51 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Usage Guidelines Use the clear ethernet cfm errors command to purge error database e...

[Page 70] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm maintenance-points remote 52 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ethernet cfm maintenance-points remote To purge the content...

[Page 71] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm maintenance-points remote 53 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Related Commands Command Description show ethernet cfm maintenan...

[Page 72] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm statistics 54 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ethernet cfm statistics To clear a maintenance endpoint (MEP) or server ma...

[Page 73] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ethernet cfm traceroute-cache 55 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ethernet cfm traceroute-cache To remove the contents of the Ethernet...

[Page 74] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear ip rtp header-compression 56 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear ip rtp header-compression To clear Real-Time Transport Protocol (RTP) he...

[Page 75] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear l2protocol-tunnel counters 57 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear l2protocol-tunnel counters To clear the layer 2 tunnel protocol counter...

[Page 76] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear link-protection statistics 58 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear link-protection statistics To clear the counters for a link protection ...

[Page 77] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear pw-udp vc counters 59 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear pw-udp vc counters To clear counters for virtual circuits on a pseudowire conne...

[Page 78] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear spanning-tree counters 60 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear spanning-tree counters Use the clear spanning-tree counters privileged EXEC...

[Page 79] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear spanning-tree detected-protocols 61 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear spanning-tree detected-protocols To restart the protocol migratio...

[Page 80] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear spanning-tree detected-protocols 62 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Examples This example shows how to restart the protocol migration on a ...

[Page 81] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clear switch tail-drop accounting 63 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clear switch tail-drop accounting To reset the counters for tail-drop accoun...

[Page 82] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR clock update-calendar 64 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 clock update-calendar To perform a one-time update of the hardware clock (calendar) from...

[Page 83] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config initial 65 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns config initial To enable the Cisco Networking Services (CNS) configuration agent and in...

[Page 84] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config initial 66 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Command History Usage Guidelines Use this command when a basic configuration—called a boo...

[Page 85] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config initial 67 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Related Commands Command Description cns config connect-intf Specifies the interface for co...

[Page 86] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config partial 68 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns config partial To start the Cisco Networking Services (CNS) configuration agent and acc...

[Page 87] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config partial 69 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Usage Guidelines Use this command to start the CNS partial configuration agent. You must en...

[Page 88] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config partial 70 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 <wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/04/secext" SOAP...

[Page 89] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config retrieve 71 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns config retrieve To enable the Cisco Networking Services (CNS) configuration agent and ...

[Page 90] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config retrieve 72 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Defaults The port number defaults to 80 with no encryption and 443 with encryption. Defau...

[Page 91] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns config retrieve 73 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 You can use the optional retry and interval keywords to specify an amount of time in secon...

[Page 92] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns event 74 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns event To configure the Cisco Networking Services (CNS) event gateway, which provides CNS event s...

[Page 93] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns event 75 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Command Modes Global configuration (config) Command History Usage Guidelines The CNS event agent mus...

[Page 94] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns event 76 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Examples The following example shows how to set the address of the primary CNS event gateway to the ...

[Page 95] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns exec 77 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns exec To enable and configure the Cisco Networking Services (CNS) exec agent, which provides CNS e...

[Page 96] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns exec 78 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 In previous Cisco IOS releases, the CNS exec agent was enabled when the CNS configuration agent was ...

[Page 97] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns id 79 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns id To set the unique event ID, config ID, or image ID used by Cisco Networking Services (CNS), use...

[Page 98] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns id 80 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Command History Usage Guidelines Use this command to set the unique ID to the CNS configuration agent, ...

[Page 99] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns id 81 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 Note The udi keyword will create an ID consisting of the PID, VID, and SN values. Any spaces in PID, VI...

[Page 100] Cisco MWR 2941

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR cns image password 82 Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR OL-23890-01 cns image password To configure a password to use with the Cisco Networking Services (CNS) ...