Casio pmn User's Manual

Download or browse on-line these Operation & User’s Manual for Casio pmn Projector.

Casio pmn Manual Information:

This manual for Casio pmn, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 78 pages, and the size of the file at download is 1.71 Mb. The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] Casio pmn

DATA PROJECTOR XJ-460/XJ-560 User’s Guide • Make sure you read all of the precautions in the printed “User’s Guide (Basic Operations)” first. Also see the “User’s Guide (Basic Operations)” for information about setting up the proj...

[Page 2] Casio pmn

• Digital Light Processing TM , DLP TM , Digital Micromirror Device TM , and DMD TM are trademarks of Texas Instruments Incorporated of the United States. • Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are registered tradem...

[Page 3] Casio pmn

Contents 3 Projection Operations ....................................................................4 Projecting onto a Screen................................................................................... 4 Keystone Correction (AF/AK, KEYSTONE)...

[Page 4] Casio pmn

Projection Operations 4 Projectio n Operations This section explains operations that are related to projection of an image. Basic Flow Projecting onto a Screen Preparing the Projector Starting Projection Set up the projector and point it at the scree...

[Page 5] Casio pmn

Projection Operations 5 Auto Input Source Selection When you turn on the projector, it checks the status of each input source (whether or not the input source is sending a signal) in the sequence shown below. It automatically selects the first inp...

[Page 6] Casio pmn

6 Projection Operations Manually Selecting the Input Source The procedure you should use to select the input source depends on whether you are using projector keys or remote controller keys. z To select the input source using projector keys, press t...

[Page 7] Casio pmn

Projection Operations 7 Zoom and Focus Use the [ZOOM] keys to adjust the image size, and the [FOCUS] keys to focus the image. To adjust image size 1. Hold down the [ZOOM +] key to increase the size of the image or the [ZOOM –] key to decrease i...

[Page 8] Casio pmn

8 Projection Operations Auto Adjustment of an RGB Image When the input source is RGB (computer), the projector automatically adjusts vertical and horizontal positioning, frequency, and phase whenever it detects an RGB signal (following input source...

[Page 9] Casio pmn

Projection Operations 9 z The angles shown in the above illustration are subject to the following conditions. z Projection of an image from a computer (Resolution: 1024 × 768; Vertical Frequency: 60Hz) z Resize Image To Fit: On z Actual correc...

[Page 10] Casio pmn

10 Projection Operations 2. Adjust the angle and position of the projector as required so the projected chart fits within the screen area. 3. Press the [AF/AK] key again. z This performs auto keystone correction. Auto Adjustment at Power On Whil...

[Page 11] Casio pmn

Projection Operations 11 3. Use the [W] and [X] keys to correct for keystoning. z Each press of [W] or [X] shifts the indicator on the currently selected bar left or right. z Repeat steps 2 and 3 to perform keystone correction for the other direction...

[Page 12] Casio pmn

12 Projection Operations Auto Keystone Correction Certain operational environments and other factors can make it impossible to achieve sufficient accuracy when performing keystone correction. If an image appears distorted after performing auto keys...

[Page 13] Casio pmn

Projection Operations 13 z The [COLOR MODE] key is disabled while the projector is connected to a computer over a USB connection (page 67). To select the color mode in this case, use “Image Adjustment J Color Mode” (page 32). You can use the r...

[Page 14] Casio pmn

14 Projection Operations You can use the remote controller’s zoom keys to enlarge a specific part of the projected image up to four times its original size. To enlarge part of the projected image 1. On the remote controller, press the [D-ZOOM +] o...

[Page 15] Casio pmn

Projection Operations 15 While RGB is selected as the input source, you can display a sub-window that simultaneously displays the image being input through the VIDEO or S-VIDEO terminal. This function is called “picture-in-picture” or “P-IN-...

[Page 16] Casio pmn

16 Projection Operations To display the sub-window 1. On the remote controller, press the [RGB] key to select RGB as the input source. z You can also select the input source using the projector’s [INPUT] key. 2. On the remote controller, press the...

[Page 17] Casio pmn

Projection Operations 17 To change the size of the sub-window While a sub-window is displayed, use the [D-ZOOM +] and [D-ZOOM –] keys to select one of the three available sub-window sizes (small, medium, large). z When RGB is selected as the inpu...

[Page 18] Casio pmn

18 Projection Operations Use the procedures in this section to display the pointer and to select its shape (arrow, bar). You can use the pointer to point to a specific location of the projected image during a presentation. z The pointer cannot be d...

[Page 19] Casio pmn

Projection Operations 19 Selecting the Pointer Shape Each press of the [POINTER/SELECT] key while the pointer is displayed cycles through the pointer shapes in the sequence shown below. To clear the pointer from the image Press the [ESC] key. You ca...

[Page 20] Casio pmn

20 Projection Operations To operate the computer with the remote controller 1. Use the mini D-Sub cable and USB cable that come with the projector to connect the computer to the projector. After that, turn on the projector and the computer. z See t...

[Page 21] Casio pmn

Using the Setup Menu 21 Using the Setup Menu Pressing the [MENU] key while an image is being projected displays the setup menu on the projected image. The setup menu can be used to configure a variety of different projector settings. The following ...

[Page 22] Casio pmn

22 Using the Setup Menu *6 This setting can be configured only when the input source is RGB/Component. *7 This setting can be configured only when the input source is VIDEO. *8 This setting can be configured only when the input source is S-VIDEO. *9 ...

[Page 23] Casio pmn

Using the Setup Menu 23 Before Configuring Menu Settings Always remember that the settings you configure on the setup menu are applied for the input source (RGB, Component, S-VIDEO, VIDEO) that was selected when you displayed the setup menu. Note t...

[Page 24] Casio pmn

24 Using the Setup Menu This section explains projector operations you need to perform while configuring setup menu settings. It also provides details about each sub-menu item type. Basic Setup Menu Operations The following is the general flow of th...

[Page 25] Casio pmn

Using the Setup Menu 25 4. Press the [ENTER] key. z This selects the top item in the sub-menu. 5. Use the [S] and [T] keys to select the sub-menu item whose setting you want to change. 6. Change the setting or select an option to configure the curre...

[Page 26] Casio pmn

26 Using the Setup Menu Sub-menu Operations This section explains steps you need to perform in order to configure settings for each sub- menu item type (value, selection, setting screen, execution, information). Value Setting Type Sub-menu Item This ...

[Page 27] Casio pmn

Using the Setup Menu 27 Setting Screen Type Sub-menu Item This type of sub-menu item displays a separate screen that you use to configure its settings. Examples: Image Adjustment J Color Mode; Option Settings1 J Language, etc. Operation: The followin...

[Page 28] Casio pmn

28 Using the Setup Menu Execution Type Sub-menu Item This type of sub-menu item returns a setting to its initial default value. Examples: Image Adjustment J Restore Menu Defaults; Operational Info J Reset Lamp Time ) Initializing Settings (page 29) ...

[Page 29] Casio pmn

Using the Setup Menu 29 Initializing Settings The setup menu lets you initialize the settings of a particular main menu item, or for all setup menu items. To initialize the settings of a particular main menu item Example: To initialize the settings ...

[Page 30] Casio pmn

30 Using the Setup Menu To initialize all menu settings z Performing the following procedure initializes all sub-menu items for all menus, except for the language (Option Settings1 J Language) and the lamp time (Operational Info J Lamp Time). z Not...

[Page 31] Casio pmn

Using the Setup Menu 31 This section provides detailed explanations about the contents for all of the setup menu items. z The titles in this section use the format: Main Menu Item J Sub-menu Item. Image Adjustment ■ Image Adjustment J Brightnes...

[Page 32] Casio pmn

32 Using the Setup Menu ■ Image Adjustment J Color Mode This sub-menu lets you select from among five different color settings to optimize projection in accordance with image contents and projection conditions. Input Source Specific Menu Items S...

[Page 33] Casio pmn

Using the Setup Menu 33 Adjusting Color Balance by Selecting a Color Temperature Value You can use the procedure below to adjust color balance. Changing the color temperature of an image alters its whiteness. A lower color temperature makes whites r...

[Page 34] Casio pmn

34 Using the Setup Menu 3. Use the [S] and [T] keys to select the color you want to adjust, and then use the [W] and [X] keys to adjust it. 4. After all the settings are the way you want, press the [MENU] key. ■ Image Adjustment J Vertical Posi...

[Page 35] Casio pmn

Using the Setup Menu 35 ■ Image Adjustment J Noise Filter This sub-menu provides a choice of noise filter levels to remove digital noise from the projected image when RGB is selected as the input source. Note that the noise filter may not be ab...

[Page 36] Casio pmn

36 Using the Setup Menu Screen Settings ■ Screen Settings J Vertical Keystone Correction This sub-menu lets you correct for vertical keystoning of the projected image. z Vertical keystone correction can be performed regardless of the currently se...

[Page 37] Casio pmn

Using the Setup Menu 37 ■ Screen Settings J Aspect Ratio This sub-menu lets you select the aspect ratio (ratio between the vertical and horizontal dimensions) of the projected image. Input Source Specific Menu Items Setting Explanations 4:3: Se...

[Page 38] Casio pmn

38 Using the Setup Menu ■ Screen Settings J Resize Image to Fit When RGB is selected as the input source and the video resolution of the connected computer is anything other than XGA (1024 × 768 pixels), “Resize Image To Fit” automaticall...

[Page 39] Casio pmn

Using the Setup Menu 39 ■ Screen Settings J Projection Mode Use this sub-menu to specify whether projection will be from the front of the screen or the back of the screen. Input Source Specific Menu Items Setting Explanations Front: For project...

[Page 40] Casio pmn

40 Using the Setup Menu ■ Screen Settings J Startup Screen Use this sub-menu to specify whether or not a startup screen should be projected whenever the projector is turned on. Input Source Specific Menu Items Setting Explanations Logo: Projects...

[Page 41] Casio pmn

Using the Setup Menu 41 ■ Screen Settings J Mute Screen This sub-menu lets you specify what should be projected during mute (page 13). Input Source Specific Menu Items Setting Explanations Blue: Displays a blue screen during mute. Black: Displays...

[Page 42] Casio pmn

42 Using the Setup Menu Input Settings ■ Input Settings J RGB Input This sub-menu lets you specify the type of input signal in accordance with the device connected to the projector’s RGB terminal. Input Source Specific Menu Items Setting Expla...

[Page 43] Casio pmn

Using the Setup Menu 43 Setting Explanations Auto: Select this setting to have the projector switch the video signal system automatically in accordance with the input signal from the video device that is connected to the VIDEO or S-VIDEO input term...

[Page 44] Casio pmn

44 Using the Setup Menu ■ Input Settings J Signal Name Indicator This sub-menu lets you specify whether or not the name of the currently selected input source should be displayed in the projected image. Input Source Specific Menu Items Setting E...

[Page 45] Casio pmn

Using the Setup Menu 45 ■ Input Settings J Restore Menu Defaults This sub-menu returns all of the sub-menu items on the Input Settings main menu to their initial default settings. z You can perform initialization even when there is no input sign...

[Page 46] Casio pmn

46 Using the Setup Menu ■ Option Settings1 J Auto Adjust This sub-menu lets you specify whether or not auto adjustment should be performed (page 8) when RGB is selected as the input source. Input Source Specific Menu Items Setting Explanations O...

[Page 47] Casio pmn

Using the Setup Menu 47 ■ Option Settings1 J Auto Power Off This sub-menu lets you turn Auto Power Off (see “Turning Off the Projector” in the separate “User’s Guide (Basic Operations)”) on or off. Input Source Specific Menu Items Setti...

[Page 48] Casio pmn

48 Using the Setup Menu z Besides the menu operation explained above, the following operations can also be used to turn off key lock. z While the projector is on: Hold down the projector’s [ESC] key for about five seconds. z While the projector is...

[Page 49] Casio pmn

Using the Setup Menu 49 Input Source Specific Menu Items Setting Explanation On: Turns on the power on password, which requires input of a password to turn on the projector. Off: Turns off the password, which allows the projector to be operated wit...

[Page 50] Casio pmn

50 Using the Setup Menu To display the power on password setting screen 1. Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 24. Select the “Option Settings1” main menu, and then select the “Power On Password” sub-m...

[Page 51] Casio pmn

Using the Setup Menu 51 3. Use the [W] and [X] keys to turn the power on password on or off. z Changing the power on password setting causes the message like the one shown below to appear. z Press the [ENTER] key to change the setting. If you do not...

[Page 52] Casio pmn

52 Using the Setup Menu ■ Option Settings1 J Custom Logo Settings With this sub-menu, you can cut part of the projected screen and use it to create an original logo, which you can display for the startup screen, the no signal screen, and the mut...

[Page 53] Casio pmn

Using the Setup Menu 53 To capture a custom logo 1. Project the still image that you want to use as the custom logo. 2. Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 24. Select the “Option Settings1” main menu, and th...

[Page 54] Casio pmn

54 Using the Setup Menu 7. Use the cursor keys to move the cross cursor and draw the selection boundary. 8. When the area you want to capture is enclosed by the selection boundary, press the [ENTER] key. z This causes the message “Start image cap...

[Page 55] Casio pmn

Using the Setup Menu 55 Configuring Custom Logo Capture Settings Before capturing a custom logo, configure the following settings to control its position, zoom, and other parameters when it is projected. z The “Logo Vertical”, “Logo Horizont...

[Page 56] Casio pmn

56 Using the Setup Menu To configure custom logo settings 1. Perform steps 2 and 3 under “To capture a custom logo” on page 53 to display the custom logo setting screen. 2. Use the [S] and [T] keys to select the custom logo item whose setting y...

[Page 57] Casio pmn

Using the Setup Menu 57 To initialize the custom logo z Initializing custom logo settings clears the currently registered custom logo and returns all of the settings of the custom logo setting screen to their initial defaults. 1. Perform steps 2 and...

[Page 58] Casio pmn

58 Using the Setup Menu ■ Option Settings1 J Language This sub-menu lets you specify the language to use for messages, setup menus, etc. Input Source Specific Menu Items Setting Storage A single setting is stored, which is applied to all input s...

[Page 59] Casio pmn

Using the Setup Menu 59 ■ Option Settings1 J Restore Menu Defaults This sub-menu returns all of the sub-menu items on the Option Settings1 main menu to their initial default settings. z You can perform initialization even when there is no input ...

[Page 60] Casio pmn

60 Using the Setup Menu ■ Option Settings2 J Power On AF/AK Mode You can specify either of two different auto adjustment operations to be performed whenever the projector is turned on. Input Source Specific Menu Items Setting Explanations Cont...

[Page 61] Casio pmn

Using the Setup Menu 61 ■ Option Settings2 J Zoom Memory Zoom memory lets you save the zoom setting when the projector is turned off, so it can be restored automatically the next time the projector is turned on. Input Source Specific Menu Items...

[Page 62] Casio pmn

62 Using the Setup Menu ■ Option Settings2 J Restore Menu Defaults This sub-menu returns all of the sub-menu items on the Option Settings2 main menu to their initial default settings. z You can perform initialization even when there is no input...

[Page 63] Casio pmn

Using the Setup Menu 63 ■ Operational Info J Scan System This sub-menu item appears only when RGB or Component is the input signal, and shows the scanning frequency of the input signal. The input signal is interlace or non-interlace for RGB sig...

[Page 64] Casio pmn

Appendix 64 Appendix When performing an operation on the remote controller, point it at the remote control signal port on the back or front of the projector. The following illustration shows the range of the remote controller signal. Remote Contro...

[Page 65] Casio pmn

Appendix 65 z The allowable projection range is from 0.8 meter (2.62 feet) to 16.1 meters (52.82 feet), which is the distance from the surface of the lens to the screen. The following table shows the relationship between the distance and projected i...

[Page 66] Casio pmn

66 Appendix Some video devices are equipped with a component video output terminal. You can use an optionally available component video cable (YK-3) to connect the RGB input terminal of the projector to the component video output terminal of a vide...

[Page 67] Casio pmn

Appendix 67 After you connect a computer to the projector’s USB port, you can use the remote controller to perform computer mouse operations, and previous page and next page operations. The illustration shows how to connect to the USB port. z For...

[Page 68] Casio pmn

68 Appendix The projector outputs images using XGA (1024 pixels × 768 pixels) video resolution. When the input signal from the computer connected to the projector is not an XGA signal, “Resize Image To Fit” automatically enlarges or reduces th...

[Page 69] Casio pmn

Appendix 69 Using the Password Feature The password feature lets you limit use of the projector to specific individuals. Note that the password feature is not an anti-theft measure. The projector is preset with an 8-key operation sequence at the fac...

[Page 70] Casio pmn

70 Appendix z Always make sure that the projector has cooled sufficiently before cleaning it. If the projector is turned on, perform the following steps before cleaning it. 1. Turn off the projector. 2. Check to make sure that the POWER/STANDBY indi...

[Page 71] Casio pmn

Appendix 71 z Continued use of the projector after dust has accumulated around the intake vents can cause overheating of internal components and lead to malfunction. z Certain operating conditions also can cause dirt and dust to accumulate around th...

[Page 72] Casio pmn

72 Appendix 2. Keeping the left nub ( 3 ) in the left depression ( 1 ), gently press the lens cover towards the right as you insert the nub ( 4 ) of the right lens cover tab into the depression ( 2 ) of the right tab under the lens. z Do not apply ...

[Page 73] Casio pmn

Appendix 73 The projector does not project any image from the connected device. The connected computer or video device may not be turned on, or it may not be outputting a video signal. J Make sure the connected computer or video device is turned...

[Page 74] Casio pmn

74 Appendix z Try performing the following steps, which can return the projector to normal operation. 1. Press the [ ] (power) key to turn off the projector. 2. After the projector’s cool down is finished and the fan is completely stopped, unplug ...

[Page 75] Casio pmn

Appendix 75 The following are the minimum Windows and Macintosh computer system requirements for USB connection with the projector. ■ Windows IBM PC/AT or compatible computer with USB port and Windows 98, 98SE, Me, 2000 Professional, or XP preins...

[Page 76] Casio pmn

76 Appendix RGB Signal Supported Signals Signal Name Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) VESA 640 × 350/85 640 × 350 37.9 85 640 × 400/85 640 × 400 37.9 85 720 × 400/85 720 × 400 37.9 85 640 × 480/60 6...

[Page 77] Casio pmn

Appendix 77 Component Signal Video/S-Video Signal * Listing of a device in the above table does not guarantee that you will be able to display its images correctly. * When “640 × 350/85” is the input signal, the “Operational Info” sub-men...

[Page 78] Casio pmn

MA0412-A ...