Download or browse on-line these Operation & User’s Manual for Cisco OL-4015-08 Network Router.
This manual for Cisco OL-4015-08, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 688 pages, and the size of the file at download is 5.67 Mb. The document type is Operation & User’s Manual.
[Page 1] Cisco OL-4015-08
Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Cisco Router and Security Device Manager (SDM) Version 2.2 User’s Guide Cu...
[Page 2] Cisco OL-4015-08
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY K...
[Page 3] Cisco OL-4015-08
iii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 CONTENTS Home Page 1 LAN Wizard 1 Ethernet Configuration 2 LAN Wizard: Select an Interface 3 LAN Wizard: IP Address and Subnet Mask 3 LAN Wizard: Enable DHCP ...
[Page 4] Cisco OL-4015-08
Contents iv Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 How Do I View the IOS Commands I Am Sending to the Router? 12 How Do I Launch the Wireless Application from SDM? 13 Create Connection Wizards 1 Create ...
[Page 5] Cisco OL-4015-08
v Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Delete Connection 19 Summary 21 Connectivity testing and troubleshooting 22 How Do I... 26 How Do I View the IOS Commands I Am Sending to the Router? 2...
[Page 6] Cisco OL-4015-08
Contents vi Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Add or Edit BVI Interface 18 Add Loopback Interface/Connection—Loopback 18 Connection: Ethernet LAN 19 Connection: Ethernet WAN 20 Ethernet Propertie...
[Page 7] Cisco OL-4015-08
vii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Advanced Firewall Interface Configuration 5 Advanced Firewall DMZ Service Configuration 6 DMZ Service Configuration 7 Advanced Firewall Inspection Rul...
[Page 8] Cisco OL-4015-08
Contents viii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 SDM Warning: Inspection Rule 15 SDM Warning: Firewall 16 Application Security 17 Application Security Windows 17 No Application Security Policy 19 E-...
[Page 9] Cisco OL-4015-08
ix Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents VPN Authentication Information 49 Backup GRE Tunnel Information 51 Routing Information 52 Static Routing Information 53 Select Routing Protocol 54 Summ...
[Page 10] Cisco OL-4015-08
Contents x Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Easy VPN Remote 77 Create Easy VPN Remote 77 Configure an Easy VPN Remote Client 77 Connection Settings 78 Authentication 79 Interfaces 80 Summary of Co...
[Page 11] Cisco OL-4015-08
xi Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents General Group Information 111 DNS and WINS Configuration 112 Split Tunneling 113 Client Settings 115 Choose Browser Proxy Settings 117 Add or Edit Brow...
[Page 12] Cisco OL-4015-08
Contents xii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 DMVPN Network Topology 9 Specify Hub Information 10 Spoke GRE Tunnel Interface Configuration 10 SDM Warning: DMVPN Dependency 11 Edit Dynamic Multipoi...
[Page 13] Cisco OL-4015-08
xiii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Add or Edit Transform Set 40 IPSec Rules 43 Internet Key Exchange 45 Internet Key Exchange (IKE) 45 IKE Policies 46 Add or Edit IKE Policy 48 IKE Pre...
[Page 14] Cisco OL-4015-08
Contents xiv Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Enable Password Encryption Service 10 Enable TCP Keepalives for Inbound Telnet Sessions 11 Enable TCP Keepalives for Outbound Telnet Sessions 11 Enabl...
[Page 15] Cisco OL-4015-08
xv Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Enable AAA 24 Configuration Summary Screen 25 SDM and Cisco IOS AutoSecure 25 Security Configurations SDM Can Undo 27 Undoing Security Audit Fixes 28 A...
[Page 16] Cisco OL-4015-08
Contents xvi Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Details 8 Network Address Translation Rules 8 Designate NAT Interfaces 12 Translation Timeout Settings 12 Edit Route Map 14 Edit Route Map Entry 15 Ad...
[Page 17] Cisco OL-4015-08
xvii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Signature Import Wizard Summary 41 Signatures 42 Assign Actions 46 Import Signatures 46 Add, Edit, or Clone Signature 48 Add or Edit a Signature Loca...
[Page 18] Cisco OL-4015-08
Contents xviii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Edit QoS Policy 13 Edit QoS Class 15 Add a Protocol 17 Interface Association 18 QoS Status 18 Network Admission Control 21 Create NAC Tab 21 Other T...
[Page 19] Cisco OL-4015-08
xix Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Router Properties 1 Device Properties 1 Date and Time: Clock Properties 2 Date and Time Properties 3 NTP 4 Add or Edit NTP Server Details 5 SNTP 7 Add...
[Page 20] Cisco OL-4015-08
Contents xx Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 DNS Properties 26 Dynamic DNS Methods 26 Add or Edit Dynamic DNS Method 27 ACL Editor 1 Useful Procedures for Access Rules and Firewalls 2 Rules Window...
[Page 21] Cisco OL-4015-08
xxi Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Router Provisioning 33 Router Provisioning from USB 33 Public Key Infrastructure 35 Certificate Wizards 35 Welcome to the SCEP Wizard 37 Certificate A...
[Page 22] Cisco OL-4015-08
Contents xxii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Open Firewall 56 Open Firewall Details 57 Resetting to Factory Defaults 1 This Feature Not Supported 4 More About.... 1 IP Addresses and Subnet Masks...
[Page 23] Cisco OL-4015-08
xxiii Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Contents Firewall Policy Use Case Scenario 29 DMVPN Configuration Recommendations 32 SDM White Papers 34 Getting Started 1 What’s New in this Release? 2 Ci...
[Page 24] Cisco OL-4015-08
Contents xxiv Cisco Router and Security Device Manager (SDM) Version 2.1 User’s Guide OL-4015-06 Edit Menu Commands 9 Preferences 9 View Menu Commands 1 Home 1 Configure 1 Monitor 1 Running Config 2 Show Commands 2 SDM Default Rules 2 Refresh 3 T...
[Page 25] Cisco OL-4015-08
CHAPTER 1-1 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 1 Home Page The home page supplies basic information about the router’s hardware, software, and configuration. This page contains the following sections: ...
[Page 26] Cisco OL-4015-08
Chapter 1 Home Page 1-2 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 More... The More... link displays a popup window providing additional hardware and software details. • Hardware Details—In addition to...
[Page 27] Cisco OL-4015-08
1-3 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 1 Home Page Interfaces and Connections Up (n): The number of LAN and WAN connections that are up. Down (n): The number of LAN and WAN connections ...
[Page 28] Cisco OL-4015-08
Chapter 1 Home Page 1-4 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Interface Firewall Icon NAT Inspection Rule Access Rule The name of the interface to which a firewall has been applied Whether the inter...
[Page 29] Cisco OL-4015-08
1-5 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 1 Home Page Note • Some VPN servers or concentrators authenticate clients using Extended Authentication (XAuth). This shows the number of VPN tunnels...
[Page 30] Cisco OL-4015-08
Chapter 1 Home Page 1-6 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 ...
[Page 31] Cisco OL-4015-08
CHAPTER 2-1 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 2 LAN Wizard The Cisco Router and Security Device Manager (SDM) LAN wizard guides you in the configuration of a LAN interface. The screen lists the LAN int...
[Page 32] Cisco OL-4015-08
Chapter 2 LAN Wizard Ethernet Configuration 2-2 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 What Do You Want to Do? You can return to this screen as often as necessary to configure additional LAN interfaces....
[Page 33] Cisco OL-4015-08
2-3 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 2 LAN Wizard LAN Wizard: Select an Interface • A DHCP address pool if you decide to use DHCP on this interface • The addresses of DNS and WINS serve...
[Page 34] Cisco OL-4015-08
Chapter 2 LAN Wizard LAN Wizard: Enable DHCP Server 2-4 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 LAN Wizard: Enable DHCP Server This screen lets you enable a DHCP server on your router. A DHCP server auto...
[Page 35] Cisco OL-4015-08
2-5 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 2 LAN Wizard DHCP Options DHCP Options Use this window to configure DHCP options that will be sent to hosts on the LAN that are requesting IP addresses...
[Page 36] Cisco OL-4015-08
Chapter 2 LAN Wizard LAN Wizard: VLAN Mode 2-6 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 LAN Wizard: VLAN Mode This screen lets you determine the type of VLAN information that will be carried over the swit...
[Page 37] Cisco OL-4015-08
2-7 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 2 LAN Wizard IRB Bridge Include this VLAN in an IRB bridge that will form a bridge with your wireless network. (Use Wireless Application to complete.) ...
[Page 38] Cisco OL-4015-08
Chapter 2 LAN Wizard DHCP Pool for BVI 2-8 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 IP Address Enter the IP address for the interface in dotted decimal format. Your network administrator should determine ...
[Page 39] Cisco OL-4015-08
2-9 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 2 LAN Wizard IRB for Ethernet IRB for Ethernet If your router has a wireless interface, you can use Integrated Routing and Bridging to have this interf...
[Page 40] Cisco OL-4015-08
Chapter 2 LAN Wizard Summary 2-10 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Configure Switch Device Module If you are configuring a Gigabit Ethernet interface for routing, you can provide information about...
[Page 41] Cisco OL-4015-08
2-11 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 2 LAN Wizard How Do I... Step 1 From the category bar, click Routing. Step 2 In the Static Routing group, click Add.... The Add IP Static Route dialog ...
[Page 42] Cisco OL-4015-08
Chapter 2 LAN Wizard How Do I... 2-12 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Step 5 Click Start Monitoring to see statistics for all selected data items. The Interface Details screen appears, displaying ...
[Page 43] Cisco OL-4015-08
2-13 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 2 LAN Wizard How Do I... The next time you use a wizard to configure the router and click Finish on the Summary window, the Deliver window will appear...
[Page 44] Cisco OL-4015-08
Chapter 2 LAN Wizard How Do I... 2-14 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 ...
[Page 45] Cisco OL-4015-08
CHAPTER 3-1 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 3 Create Connection Wizards The Create Connection wizards let you configure LAN and WAN connections for all SDM-supported interfaces. Create Connection This...
[Page 46] Cisco OL-4015-08
Chapter 3 Create Connection Wizards WAN Wizard Interface Welcome Window 3-2 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 The Other (Unsupported by SDM) radio button appears if an unsupported logical or physic...
[Page 47] Cisco OL-4015-08
3-3 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards ISDN Wizard Welcome Window ISDN Wizard Welcome Window PPP is the only type of encoding supported over ISDN BRI by SDM. Analo...
[Page 48] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Select Interface 3-4 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Select Interface This window appears if there are more than one interface of the type you selected in the ...
[Page 49] Cisco OL-4015-08
3-5 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards IP Address: ATM with RFC 1483 Routing Dynamic (DHCP Client) If you choose Dynamic, the router will lease an IP address from ...
[Page 50] Cisco OL-4015-08
Chapter 3 Create Connection Wizards IP Address: Ethernet without PPPoE 3-6 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 IP Unnumbered Click IP Unnumbered if you want the interface to share an IP address that h...
[Page 51] Cisco OL-4015-08
3-7 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards IP Address: Serial with HDLC or Frame Relay Static IP Address If you choose static IP address, enter the IP address and subn...
[Page 52] Cisco OL-4015-08
Chapter 3 Create Connection Wizards IP Address: ISDN BRI or Analog Modem 3-8 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 IP Unnumbered Select IP Unnumbered if you want the interface to share an IP address tha...
[Page 53] Cisco OL-4015-08
3-9 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Authentication Authentication This page is displayed if you enabled PPP for a serial connection, PPPoE or PPPoA encapsulati...
[Page 54] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Switch Type and SPIDs 3-10 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 ISDN Switch Type Select the ISDN switch type. Contact your ISDN service provider for the switch type...
[Page 55] Cisco OL-4015-08
3-11 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Dial String A SPID is usually a 7-digit telephone number with some optional numbers. However, service providers may use di...
[Page 56] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Backup Configuration 3-12 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Backup Configuration: Primary Interface & Next Hop IP Addresses In order for the ISDN BRI or anal...
[Page 57] Cisco OL-4015-08
3-13 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Advanced Options Advanced Options There are two advanced options available, based on the router’s configuration: Default...
[Page 58] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Encapsulation 3-14 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Autodetect Click Autodetect to have SDM discover the encapsulation type. If SDM succeeds, it will automatica...
[Page 59] Cisco OL-4015-08
3-15 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards PVC The encapsulations available if you have a serial interface are shown in the following table. PVC ATM routing uses a t...
[Page 60] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Configure LMI and DLCI 3-16 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 VCI Enter the VCI value obtained from your service provider or system administrator. The virtual ci...
[Page 61] Cisco OL-4015-08
3-17 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Configure Clock Settings DLCI Enter the DLCI in this field. This number must be unique among all DLCIs used on this interf...
[Page 62] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Configure Clock Settings 3-18 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 T1 Framing This field configures the T1 or E1 link for operation with D4 Super Frame (sf) or Exte...
[Page 63] Cisco OL-4015-08
3-19 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Delete Connection Line Build Out (LBO) This field is used to configure the Line Build Out (LBO) of the T1 link. The LBO de...
[Page 64] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Delete Connection 3-20 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 To view the associations that the connection has: Click View Details. To delete the connection and all as...
[Page 65] Cisco OL-4015-08
3-21 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Summary • Crypto—A crypto map is applied to the interface on which the connection was created. To delete the crypto ma...
[Page 66] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Connectivity testing and troubleshooting 3-22 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Test the connectivity after configuring Check this box if you want SDM to test the...
[Page 67] Cisco OL-4015-08
3-23 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Connectivity testing and troubleshooting 3. Checks for DHCP and IPCP configurations on the interface. 4. Exits interface te...
[Page 68] Cisco OL-4015-08
Chapter 3 Create Connection Wizards Connectivity testing and troubleshooting 3-24 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 • the PPPoE tunnel status • the PPP authentication status After performing the...
[Page 69] Cisco OL-4015-08
3-25 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards Connectivity testing and troubleshooting Activity This column displays the troubleshooting activities. Status Displays the...
[Page 70] Cisco OL-4015-08
Chapter 3 Create Connection Wizards How Do I... 3-26 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 How Do I... This section contains procedures for tasks that the wizard does not help you complete. How Do I Vi...
[Page 71] Cisco OL-4015-08
3-27 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards How Do I... How Do I View Activity on My WAN Interface? You can view activity on a WA N interface by using the Monitor fea...
[Page 72] Cisco OL-4015-08
Chapter 3 Create Connection Wizards How Do I... 3-28 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 The interface is added to the pool of interfaces using NAT. Step 6 Review the Network Address Translation Rules...
[Page 73] Cisco OL-4015-08
3-29 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards How Do I... The Dynamic Routing dialog box appears, displaying the tab for the dynamic routing protocol you selected. Step...
[Page 74] Cisco OL-4015-08
Chapter 3 Create Connection Wizards How Do I... 3-30 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Step 4 Click Edit. The Connection tab appears. Step 5 Click Options. The Edit Dialer Option dialog box appears....
[Page 75] Cisco OL-4015-08
3-31 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 3 Create Connection Wizards How Do I... Step 3 Select the radio interface and click Edit. In the Connections tab, you can change the IP address or bri...
[Page 76] Cisco OL-4015-08
Chapter 3 Create Connection Wizards How Do I... 3-32 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 ...
[Page 77] Cisco OL-4015-08
CHAPTER 4-1 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 4 Edit Interface/Connection This window displays the router’s interfaces and connections. The window also enables you to add, edit, and delete connections...
[Page 78] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection 4-2 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Delete Selecting a connection and clicking Delete displays a dialog box informing you of the associations this connection h...
[Page 79] Cisco OL-4015-08
4-3 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection If SDM is running on a Cisco 7000 router, you will be able to create a connection only on Ethernet and Fast Ethernet interf...
[Page 80] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection 4-4 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Item Name The name of the configuration item, such as IP address/Subnet mask, or IPSec policy. The actual items listed in t...
[Page 81] Cisco OL-4015-08
4-5 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Why Are Some Interfaces or Connections Read-Only? There are many conditions that can prevent SDM from modifying a previously...
[Page 82] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Connection: Ethernet for IRB 4-6 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Connection: Ethernet for IRB This dialog box contains the following fields if you selected Ethe...
[Page 83] Cisco OL-4015-08
4-7 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Connection: Ethernet for Routing • Create a new dynamic DNS method. Click the drop-down menu and choose to create a new dy...
[Page 84] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Connection: Ethernet for Routing 4-8 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Dynamic DNS Enable dynamic DNS if you want to automatically update your DNS servers whenev...
[Page 85] Cisco OL-4015-08
4-9 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Connection: Ethernet for Routing HTTP HTTP is a dynamic DNS method type that updates a DNS service provider with changes to...
[Page 86] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Wireless 4-10 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Wireless If the router has a wireless interface, you can launch the Wireless Application from this tab. You can a...
[Page 87] Cisco OL-4015-08
4-11 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Association When a rule is applied to outbound traffic on an interface, the rule filters traffic after it has entered the ...
[Page 88] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection NAT 4-12 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 is Serial0/0, you would first select Tunnel3 in the Interfaces and Connections window, click Edit and associate the po...
[Page 89] Cisco OL-4015-08
4-13 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection General Mode Group Choose the type of VLAN information you want to be carried across this Ethernet switch port. Choosing A...
[Page 90] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection General 4-14 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Description You can enter a short description in this field. This description will be visible in the theEdit Inter...
[Page 91] Cisco OL-4015-08
4-15 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection QoS IP Route Cache-Flow This option enables the Cisco IOS NetFlow feature. Using NetFlow, you can determine packet distrib...
[Page 92] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Select Ethernet Configuration Type 4-16 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Dissociate Current QoS Policy checkbox Enabled when a QoS policy is associated with the ...
[Page 93] Cisco OL-4015-08
4-17 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Connection: Subinterfaces VLAN ID Enter the ID number of the new VLAN interface. If you are editing a VLAN interface, you ...
[Page 94] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Add or Edit BVI Interface 4-18 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 In this example, FastEthernet1.5 is configured for routing, and FastEthernet1.3 is configured fo...
[Page 95] Cisco OL-4015-08
4-19 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Connection: Ethernet LAN Static IP Address If you selected Static IP address, enter that IP address in this field. Subnet ...
[Page 96] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Connection: Ethernet WAN 4-20 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 IP Address of Remote DHCP Server If you clicked DHCP Relay, enter the IP address of the DHCP serve...
[Page 97] Cisco OL-4015-08
4-21 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Ethernet Properties Authentication Click this button to enter CHAP/PAP authentication password information. Dynamic DNS Ena...
[Page 98] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Connection: Ethernet with No Encapsulation 4-22 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 IP Address Static IP Address Available with PPPoE encapsulation and with no enca...
[Page 99] Cisco OL-4015-08
4-23 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Chapter 4 Edit Interface/Connection Connection: ADSL • Dynamic IP address—If you choose Dynamic, the router will lease an IP address from a remote DHCP se...
[Page 100] Cisco OL-4015-08
Chapter 4 Edit Interface/Connection Connection: ADSL 4-24 Cisco Router and Security Device Manager Version 2.2 User’s Guide OL-4015-08 Encapsulation Select the type of encapsulation that will be used for this link. • PPPoE specifies Point...
Troubleshooting manual (4 pages)
Software manual (286 pages)
Quick start quide (12 pages)
Hardware installation manual (106 pages)
Datasheet (19 pages)
Datasheet (16 pages)