Clarke WARRIOR 30 Operating & Maintenance Manual

Download or browse on-line these Operating & Maintenance Manual for Clarke WARRIOR 30 Air Compressor.

Clarke WARRIOR 30 Manual Information:

This manual for Clarke WARRIOR 30, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 8 pages, and the size of the file at download is 0.25 Mb. The document type is Operating & Maintenance Manual.

Download Manual

Summary of Contents:

[Page 1] Clarke WARRIOR 30

O 0903 WARRIOR 30 & 60 AIR COMPRESSOR OPERATING & MAINTENANCE INSTRUCTIONS WARRIOR 30 & 60 AIR COMPRESSOR ...

[Page 2] Clarke WARRIOR 30

O COMPRESSOR No. Description Qty Part No. 1 Head Bolt 4 FN014002021 2 After Cooler 1 FN116117020 3 Cylinder Head 1 FN016055040 4 Filter Unit 1 FN317050000 5 Head Gasket (Upper)1 FN116117002 6 Valve Block 1 FN116022100 7 Screw 2 FN014013021 8 O-Ring ...

[Page 3] Clarke WARRIOR 30

O 3 Thank you for purchasing this Warrior Air Compressor which is available in two configurations - WARRIOR 30, fitted with a 24 litre air receiver and WARRIOR 60, fitted with a 50 litre receiver. Before attempting to operate the machine, please read...

[Page 4] Clarke WARRIOR 30

O 4 SAFETY PRECAUTIONS WARNING As with all machinery, there are certain hazards involved with their operation and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are over...

[Page 5] Clarke WARRIOR 30

O 12 WARRIOR 30 5 ELECTRICAL CONNECTIONS WARRIOR 30, 110V Model Connect the mains lead to a suitable 110V (50Hz) electrical supply through an approved plug or a suitably fused isolator switch. If using a portable 110V transformer, make sure it has a ...

[Page 6] Clarke WARRIOR 30

O 6 PREPARATION FOR USE NOTE: All numbered items throughout this manual refer to the parts list item number on Pages 12 - 15 1. Remove the plastic travel plug from the oil filler hole, on the top of the crank case, and insert the dipstick (see Fig. 7...

[Page 7] Clarke WARRIOR 30

O 7 NOTE: Should the motor fail to start immediately, it is probable that the air receiver is already full of air. Check the tank pressure gauge (see fig. 2). If you release air, by opening air outlet tap, the motor will start automatically once the...

[Page 8] Clarke WARRIOR 30

O SHUTTING DOWN THE COMPRESSOR 1. The Pressure Switch is provided with an ON/OFF switch (See Fig. 2) which, when pushed down to the ‘OFF’ (0) position, cuts off the motor. Always use this switch to shut down the compressor. NEVER USE THE MAINS SW...