D-link DPG-2000W Installation Manual

[Page 1] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

Check Your Package Contents These are the items included with your purchase: If any of the below items are missing, please contact your reseller. Before You Begin You will need the following: • Pentium III, 750MHz or above based computer with a CD-...

[Page 2] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

2 Connections and LEDs Front Panel Rear Panel Power LED: Lights solid green when connected to a power source. Wireless LED: During boot-up this LED will remain unlit. While waiting for a connection the LED blinks amber rapidly. A solid green light in...

[Page 3] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

3 Connecting the DPG-2000W Connect the DPG-2000W to a monitor or projector Connect a standard VGA monitor cable to the 15 pin connector labeled Projector/ Monitor on the rear panel. Attach the External Power Supply Attach the external power adapter t...

[Page 4] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

4 Establishing a Wireless Link with the DPG-2000W Each wireless network adapter manufacturer provides their own wireless configuration utility. Launch the appropriate utility and configure the adapter with the following settings: • Infrastructure m...

[Page 5] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

5 Installing the Presentation Session Manager (PSM) Software Insert the DPG-2000W CD in to the CD-ROM drive and the following screen will appear. Click on PSM Installer. Click Next to begin the software installation. The PSM software can be installed...

[Page 6] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

6 Installing the Presentation Session Manager (PSM) Software (continued) Click Next to proceed with the Typical install. Click Next to use the default destination folder. ...

[Page 7] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

7 Click Next to use the default program folder. Click Finish to complete the installation. Installing the Presentation Session Manager (PSM) Software (continued) ...

[Page 8] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

8 Launching the Presentation Session Manager (PSM) Software Click OK to proceed. Before Starting the Presentation Session Manager, your system must have a valid IP address. If you installed the PSM software on your computer, Go to: Start > Program...

[Page 9] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

9 Launching the Presentation Session Manager (PSM) Software (continued) Note: The PSM window must remain open but can be minimized. Click to Establish a Session. Click OK You should now be connected to the DPG-2000W. To install the administration sof...

[Page 10] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

10 Troubleshooting If you are unable to connect or establish a session with the DPG-2000W. • Verify the SSID of the wireless adapter matches the SSID of the DPG-2000W displayed on the banner page on boot up. • Ensure the computer’s wireless net...

[Page 11] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

11 Notes ...

[Page 12] D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway

TT TT T echniechni echniechni echni cal Supportcal Support cal Supportcal Support cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States a...