Download or browse on-line these Update Manual for Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION Processor.
This manual for Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 8 pages, and the size of the file at download is 0.3 Mb. The document type is Update Manual.
[Page 1] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
4/23/10 PEP2000 This procedure is used to update Main CPU Ver. 0151 and EDSP Ver. 11.54 the flash programming for the FT-2000/D Transceivers. We recommend installing the Flash Programming Software on a PC computer with Windows 20...
[Page 2] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
Ver. 0151 MAIN CPU implements improvements (also includes all previous updates): • AGC: Corrected the AGC in the “OFF” position; if an AGC MENU SET item was changed, the AGC would sometimes turn “ON”. • KEYER: The extraneous “dot...
[Page 3] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
(2) Connect the CT-119 Cable’s DB9F connector to the serial port COM1 in the back of your computer. If you use a USB to serial adapter, you might need to change the COM Port number. (3) Now go to the desktop open PEP2000_MAIN folder and find t...
[Page 4] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
EDSP EDSP Software Update This procedure is used for uploading new EDSP Software into the FT-2000/D Amateur Transceivers, from your personal computer, using the RS-232C, DB9F to DB9F straight cable. 1. Tur...
[Page 5] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
6. Click the Update button. You will see AH025H_V1154 out file displayed. If you do not see AH025H_V1154 (as in the screen below), then open the “Look in:” window and go to the desktop and find PEP2000_EDSP. Open the folder and AH025H...
[Page 6] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
ADDENDUM If the CT-119 programming cable or 8-pin mini-DIN PGM-SW (P0091526) is not available you will need a serial cable RS-232C, DB9F to DB9F straight cable. Please follow these instructions. MAIN Software Update *Don't forget t...
[Page 7] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
(7) Now go to the desktop open PEP2000_MAIN folder and find the FSW003 icon as shown below. Double-click the FSW003 icon, displayed on the Program Screen. (8) When the program opens, confirm that the file AH025_...
[Page 8] Yaesu FT-2000D - UPDATE V0151 AND V11.54 INFORMATION
Figure A Remove the left rear foot (near the CAT connector) to expose the program switch access hole. Switch S3004 is visible through the hole. Move the switch to the on (rear) position. (Top of picture) This is just a screw h...
Operation & user’s manual (80 pages)
Update manual (9 pages)
Owner's manual (4 pages)
Owner's manual (2 pages)
Overview (19 pages)