Download or browse on-line these Release Note for Dell PowerConnect J-8208 Switch.
This manual for Dell PowerConnect J-8208, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 65 pages, and the size of the file at download is 0.98 Mb. The document type is Release Note.
In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Dell PowerConnect J-8208. Just click one of the links below to go to the selected manual:
Pages: 24
Pages: 14
Pages: 276
[Page 1] Dell PowerConnect J-8208
Junos ® 10.3 OS Release Notes for Dell PowerConnect J-SRX Series Services Gateways and J-EX Series Ethernet Switches Release 10.3R2 22 November 2010 These release notes accompany Release 10.3 of the Juniper Networks Junos operating system (Junos OS)...
[Page 2] Dell PowerConnect J-8208
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Flow and Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Interfaces and Routing . . . . ....
[Page 3] Dell PowerConnect J-8208
Hardware Requirements for Junos OS Release 10.3 for J-SRX Series Services Gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Transceiver Compatibility for J-SRX Series Devices . . . . . . ....
[Page 4] Dell PowerConnect J-8208
Junos OS Release Notes for Dell PowerConnect J-SRX Series Services Gateways Powered by Junos OS, Dell PowerConnect J-SRX Series Services Gateways provide robust networking and security services. J-SRX Series Services Gateways range from lower-end dev...
[Page 5] Dell PowerConnect J-8208
Software Features Security • Policy usability—This feature is supported on all J-SRX Series devices. In a Junos OS stateful firewall, security policies enforce rules for transit traffic, in terms of what traffic can pass through the firewall, and...
[Page 6] Dell PowerConnect J-8208
The group VPN in Release 10.3 of Junos OS has been tested with Cisco GET VPN servers running Version 12.4(22)T and Version 12.4(24)T. To avoid traffic disruption, do not enable rekey on a Cisco server when the VPN group includes a Dell security devic...
[Page 7] Dell PowerConnect J-8208
Application Layer Gateways (ALGs) • The show security alg msrpc object-id-map CLI command has a chassis cluster node option to permit the output to be restricted to a particular node or to query the entire cluster. The show security alg msrpc objec...
[Page 8] Dell PowerConnect J-8208
Chassis Cluster • Removing Control VLAN 4094 in Chassis Cluster— For J-SRX Series branch devices (J-SRX100, J-SRX210, and J-SRX240), the existing virtual LAN (VLAN) tag used for control-link traffic will be replaced with the use of experimental E...
[Page 9] Dell PowerConnect J-8208
Command-Line Interface (CLI) • On AX411 Access Points, the possible completions available for the CLI command set wlan access-point < ap_name > radio < radio_num > radio-options channel number ? have changed from previous implementation...
[Page 10] Dell PowerConnect J-8208
13 Channel 13 14 Channel 14 auto Automatically selected • On AX411 Access Points, the possible completions available for the CLI command set wlan access-point mav0 radio 1 radio-options mode? have changed from previous implementations. Now this CLI...
[Page 11] Dell PowerConnect J-8208
• On J-SRX Series devices, the show system storage partitions command now displays the partitioning scheme details on J-SRX Series devices. • Example 1: show system storage partitions (dual root partitioning) user@host# show system storage partit...
[Page 12] Dell PowerConnect J-8208
• On J-SRX100, J-SRX210, and J-SRX240 devices, support for Layer LAG is added in both standalone and cluster mode. In cluster mode, the following CLI is now enabled to specify the number of aggregated interfaces. set chassis aggregated-devices ethe...
[Page 13] Dell PowerConnect J-8208
• On J-SRX Series devices, when you configure identical IPs on a single interface, you no longer get a warning message; instead, a syslog message appears. Interfaces and Routing • On J-SRX Series devices, to minimize the size of system logs, the ...
[Page 14] Dell PowerConnect J-8208
session { session-limit 7; } } • Disabling J-Web: Dynamic VPN must have the configured HTTPS certificate and the webserver to communicate with the client. Therefore, the configuration at the [edit system services web-management] hierarchy level req...
[Page 15] Dell PowerConnect J-8208
Navigates to the Page Not Found page Navigates to the Page Not Found page Navigates to the Page Not Found page J-Web is not enabled, and dynamic VPN is not configured. Navigates to the Page Not Found page Navigates to the J-Web login page if the J-We...
[Page 16] Dell PowerConnect J-8208
• J-Web login page is updated with the new Juniper Networks logo and trademark. • The options to configure the Custom Attacks, Custom Attack Groups, and Dynamic Attack Groups are disabled because they cannot be configured from J-Web. Multilink �...
[Page 17] Dell PowerConnect J-8208
1450 bytes, the excess length is trimmed and the user is directed to the destination URL that has been resized to 1450 bytes. WLAN • While configuring the AX411 Access Point on your J-SRX Series devices, you must enter the WLAN admin password using...
[Page 18] Dell PowerConnect J-8208
Accounting-Options Hierarchy • On J-SRX100, J-SRX210, and J-SRX240 devices, the accounting, source-class, and destination-class statements in the [accounting-options] hierarchy level are not supported. AX411 Access Point Hierarchy • On J-SRX100 d...
[Page 19] Dell PowerConnect J-8208
set firewall family vpls filter set firewall family mpls dialer-filter d1 term Interfaces CLI Hierarchy On all J-SRX100, J-SRX210, and J-SRX240 devices, the following interface hierarchy CLI commands are not supported. However, if you enter these co...
[Page 20] Dell PowerConnect J-8208
set interfaces at-1/0/0 unit 0 atm-l2circuit-mode set interfaces at-1/0/0 unit 0 atm-scheduler-map set interfaces at-1/0/0 unit 0 cell-bundle-size set interfaces at-1/0/0 unit 0 compression-device set interfaces at-1/0/0 unit 0 epd-threshold set inte...
[Page 21] Dell PowerConnect J-8208
set interfaces fe-0/0/2 fastether-options source-address-filter set interfaces fe-0/0/2 fastether-options source-filtering set interfaces ge-0/0/1 passive-monitor-mode GRE Interface CLI • The following CLI commands are not supported. However, if yo...
[Page 22] Dell PowerConnect J-8208
set interfaces pt-1/0/0 no-gratuitous-arp-request set interfaces pt-1/0/0 vlan-tagging set interfaces pt-1/0/0 unit 0 radio-router set interfaces pt-1/0/0 unit 0 vlan-id T1 Interface CLI • The following CLI commands are not supported. However, if...
[Page 23] Dell PowerConnect J-8208
set interfaces vlan unit 0 ppp-options set interfaces vlan unit 0 radio-router Protocols Hierarchy • On J-SRX100, J-SRX210, and J-SRX240 devices, the following CLI commands are not supported. However, if you enter these commands in the CLI editor, ...
[Page 24] Dell PowerConnect J-8208
set snmp logical-system-trap-filter set snmp trap-options logical-system set snmp trap-group d1 logical-system System Hierarchy • On J-SRX100, J-SRX210, and J-SRX240 devices, the following system hierarchy CLI commands are not supported. However, i...
[Page 25] Dell PowerConnect J-8208
• PoE is not supported in chassis cluster mode. • Group VPN is not supported. • Sampling features like J-FLow, packet capture, and port mirror on the reth interface are not supported. • Switching is not supported in chassis cluster mode. • ...
[Page 26] Dell PowerConnect J-8208
if the force-upgrade option is configured. Conversely, if you log in using the dynamic VPN client with the force-upgrade option configured, the client upgrade occurs automatically (without a prompt). Flow and Processing • On J-SRX Series devices, h...
[Page 27] Dell PowerConnect J-8208
NOTE: Other browser versions may work but are not supported. NOTE: Only English-version browsers are supported. NOTE: For both J-SRX and J-EX devices, the browser and the network must support receiving and processing HTTP 1.1 GZIP compressed data. 27...
[Page 28] Dell PowerConnect J-8208
NOTE: For J-SRX devices, to use the Chassis View, version 9 or later of Adobe Flash Player must be installed. Chassis View is displayed by default on the Dashboard page. You can enable or disable the Chassis View using options in the Dashboard Prefer...
[Page 29] Dell PowerConnect J-8208
• Encapsulations (Ether CCC, VLAN CCC, VPLS, PPPoE, and so on) on VLAN interfaces • CLNS • PIM • DVMRP • VLAN interface MAC change • Gratuitous ARP • Change VLAN-Id for VLAN interface VLAN • On J-SRX100, J-SRX210, and J-SRX240 devices...
[Page 30] Dell PowerConnect J-8208
Outstanding Issues In Junos OS Release 10.3 for J-SRX Series Services Gateways The following problems currently exist in J-SRX Series devices. The identifier following the description is the tracking number in our bug database. Application Layer Gate...
[Page 31] Dell PowerConnect J-8208
• Back-to-back redundancy group 0 failover • Back-to-back primary node reboot [PR/414663] • If a J-SRX210 device receives more traffic than it can handle, node 1 either disappears or gets disabled. [PR/416087] • On J-SRX240 Low Memory and Hig...
[Page 32] Dell PowerConnect J-8208
Class of Service (CoS) • On J-SRX Series devices, class-of-service-based forwarding (CBF) does not work. [PR/304830] Dynamic Host Configuration Protocol (DHCP) • On J-SRX210 and J-SRX240 devices, when autoinstallation is configured to run on a pa...
[Page 33] Dell PowerConnect J-8208
• On J-SRX Series devices, the software upload and install package will not show a warning message when there are pending changes to be committed. [PR/514853] • On J-SRX240 Low Memory devices, the LSQ interface transmitting both LLQ and non-LLQ t...
[Page 34] Dell PowerConnect J-8208
3. Add the NSR configuration. [PR/440743] • On J-SRX210 Low Memory devices, the E1 interface will flap and traffic will not pass through the interface if you restart forwarding while traffic is passing through the interface. [PR/441312] • On J-SR...
[Page 35] Dell PowerConnect J-8208
As a workaround, configure radius-server outside the profile option under access option. [PR/503717] • On J-SRX100, J-SRX210, and J-SRX240 devices, egress queues are not supported on VLAN or IRB interfaces.[PR/510568] • On J-SRX240 devices, IGMP ...
[Page 36] Dell PowerConnect J-8208
and the user cannot obtain or configure any value under these filter options. [PR/460244] • On J-SRX100, J-SRX210, and J-SRX240 devices, when you have a large number of static routes configured, and if you have navigated to pages other than to page...
[Page 37] Dell PowerConnect J-8208
ports to a maximum power of 12.4 watts. Use the following command to configure the ports: root#set poe interface all maximum-power 12.4 [PR/465307] • On J-SRX100, J-SRX210, and J-SRX240 devices with factory default configurations, the device is not...
[Page 38] Dell PowerConnect J-8208
• On J-SRX210 and J-SRX240 devices, the Websense server stops taking new connections after HTTP stress. All new sessions get blocked. As a workaround, reboot the Websense server. [PR/435425] • On J-SRX240 devices, if the device is under UTM stres...
[Page 39] Dell PowerConnect J-8208
(LLDP) organization specific Type Length Value (TLV), medium attachment unit (MAU) information always propagates as "Unknown". [PR/480361] • On J-SRX100 High Memory devices and J-SRX210 Low Memory devices, dot1x unauthenticated ports acce...
[Page 40] Dell PowerConnect J-8208
• On J-SRX240 devices in chassis cluster active/active preempt mode, the RTSP session broke after a primary node reboot and preempt failover. The following common ALGs were broken: RSH, TALK, PPTP, MSRPC, RTSP, SUNRPC, and SQL. [PR/448870: This iss...
[Page 41] Dell PowerConnect J-8208
J-Web • On J-SRX Series devices, when the user tried to associate an interface to GVRP, a new window appeared. This new window showed multiple move-left and move-right buttons. [PR/305919: This issue has been resolved.] • On J-SRX100, J-SRX210, a...
[Page 42] Dell PowerConnect J-8208
Virtual LANs (VLANs) • On J-SRX240 devices, the Layer 3 traffic with VLAN ID 4093 was allowed but did not forward traffic over that interface. [PR/539580: This issue has been resolved.] VPNs • On J-SRX Series devices, Remote Procedure Call (RPC) ...
[Page 43] Dell PowerConnect J-8208
• If Commit Preference is Validate configuration changes, click OK to check your configuration and save it as a candidate configuration, then click Commit Options>Commit. J-Web Online Help • Previously, J-Web online Help instructions were avai...
[Page 44] Dell PowerConnect J-8208
J-SRX100, J-SRX210, and J-SRX240 support the Link aggregation in chassis cluster mode feature. • The Feature Support Reference for SRX Series and J Series Devices on page 31, Table 27 for MPLS Support erroneously states that only J-SRX240 supports ...
[Page 45] Dell PowerConnect J-8208
procedure, however, is incorrect. This command would forward users to my-website.com before authentication, not after. To redirect users after authentication, the command must include: • The IP address of the Infranet Controller to be used for auth...
[Page 46] Dell PowerConnect J-8208
Quick Start Guides • The following J-SRX Series Quick Start Guides erroneously provide an IP address of 192.168.1/24 in the “Part 4: Ensure That the Management Device Acquires an IP Address” section: • J-SRX100 Services Gateway Quick Start Gu...
[Page 47] Dell PowerConnect J-8208
J-SRX210 Services Gateway Hardware Guide • The output for the show chassishardware and showchassis hardware detail commands is incorrectly documented for the Routing Engine field. The following table provides details of the guide, section, incorrec...
[Page 48] Dell PowerConnect J-8208
J-SRX240 Services Gateway Hardware Guide • The output for the show chassis hardware and show chassis hardware detail commands is incorrectly documented for the Routing Engine field. The following table provides details of the guide, section, incorr...
[Page 49] Dell PowerConnect J-8208
Attention Utilisez uniquement des conducteurs en cuivre. Warnung Verwenden Sie ausschließlich Kupferleiter. Avvertenza Usate unicamente dei conduttori di rame. Advarsel Bruk bare kobberledninger. Aviso Utilize apenas fios condutores de cobre. ¡Aten...
[Page 50] Dell PowerConnect J-8208
prepare tinned, solder-plated, or silver-plated connectors or other plated connection surfaces before connecting them, but make sure such surfaces remain clean and free of contaminants. To provide a permanent low-impedance path, tighten all raceway f...
[Page 51] Dell PowerConnect J-8208
• Aggregate Server Access Protocol (ASAP) • Bearer Independent Call Control (BICC) • Direct Data Placement Segment chunk (DDP-segment) • Direct Data Placement Stream session control (DDP-stream) • DPNSS/DASS 2 extensions to IUA Protocol (DU...
[Page 52] Dell PowerConnect J-8208
NOTE: The policy should permit SCTP traffic. Upgrade and Downgrade Instructions for Junos OS Release 10.3 for J-SRX Series Services Gateways In order to upgrade to Junos OS Release 10.3 or later, your device must be running Junos OS Release 10.1R2 or...
[Page 53] Dell PowerConnect J-8208
Captive portal authentication can now be configured on the same interface with both 802.1X and MAC RADIUS authentication. Authentication fallback is enabled on an interface on which more than one type of authentication is configured. Captive portal a...
[Page 54] Dell PowerConnect J-8208
• Outstanding Issues in Junos OS Release 10.3 for J-EX Series Ethernet switches on page 57 • Resolved Issues in Junos OS Release 10.3 for J-EX Series Ethernet switches on page 60 • Errata in Documentation for Junos OS Release 10.3 for J-EX Seri...
[Page 55] Dell PowerConnect J-8208
bits. Rewriting of packets is determined by the forwarding-class and loss-priority values set in the DSCP classifier applied on the interface. • On J-EX4200 switches, the traffic is shaped at rates above 500 Kbps, even when the shaping rate configu...
[Page 56] Dell PowerConnect J-8208
Interfaces • J-EX Series Ethernet switches do not support queued packet counters. Therefore, the queued packet counter in the output of the show interfaces interface-name extensive command always displays a count of 0 and is never updated. • The ...
[Page 57] Dell PowerConnect J-8208
NOTE: For both J-SRX and J-EX devices, the browser and the network must support receiving and processing HTTP 1.1 GZIP compressed data. Layer 2 and Layer 3 Protocols • On J-EX8200 switches, ensure that the bfd-liveness-detection timers are set no l...
[Page 58] Dell PowerConnect J-8208
for more than 60 minutes. As a result, the aggregated Ethernet interfaces cannot be used until the pfem usage reduces to normal limits. [PR/544433] • When an IGMP version 3 group-specific report is sent to a VLAN in a J-EX4200 switch, the switch se...
[Page 59] Dell PowerConnect J-8208
• In the J-Web interface, in the Port Security Configuration page, you are required to configure action when you configure MAC limit even though configuring an action value is not mandatory in the CLI. [PR/434836] • In the J-Web interface, in the...
[Page 60] Dell PowerConnect J-8208
• If you have accessed the J-Web interface using Microsoft Internet Explorer, you might not be able to commit a configuration when an SSL certificate has been added to the switch using the CLI editor (Configure >CLI tools > CLI Editor). As a ...
[Page 61] Dell PowerConnect J-8208
Bridging, VLANs, and Spanning Trees • On J-EX Series Ethernet switches, when the VLAN with the lowest-numbered VLAN ID is down, the show ntp associations command output displays the following message: /usr/bin/ntpq: write to localhost failed: No ro...
[Page 62] Dell PowerConnect J-8208
• In the J-Web interface, in the OSPF Configuration page (Configuration > Routing > OSPF), the Traceoptions tab in the Edit Global Settings window does not display the available flags (tracing parameters). As a workaround, use the CLI to view...
[Page 63] Dell PowerConnect J-8208
Errata in Documentation for Junos OS Release 10.3 for J-EX Series Ethernet Switches This section lists outstanding issues with the documentation. Infrastructure • Options ip and ip6 for the show pfe statistics command are not supported on J-EX Seri...
[Page 64] Dell PowerConnect J-8208
Dell Documentation and Release Notes To download the hardware documentation for your product and the Junos OS documentation for PowerConnect J-Series J-EX Series and J-SRX Series products , see the following Dell support website: http://www.support.d...
[Page 65] Dell PowerConnect J-8208
Revision History 22 November 2010—Revision 2, Junos Release 10.3R2 © Copyright Dell, Inc. 2010. All rights reserved. Information in this document is subject to change without notice. All rights reserved. Reproduction of these materials in any mann...
Installing (52 pages)
Installation and troubleshooting manual (133 pages)
Information update (44 pages)
Administrator's manual (96 pages)
Owner's manual (121 pages)
Technical manual (51 pages)