Dynamix UM-S User Manual

Download or browse on-line these Operation & User’s Manual for Dynamix UM-S Network Router.

Dynamix UM-S Manual Information:

This manual for Dynamix UM-S, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 102 pages, and the size of the file at download is 2.45 Mb. The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] Dynamix UM-S

DYNAMIX UM-S SHDSL ROUTER User Manual ...

[Page 2] Dynamix UM-S

G.shdsl Router User Manual 152 1 Table of Contents Descriptions ..............................................................................................................4 Featur...

[Page 3] Dynamix UM-S

G.shdsl Router User Manual 152 2 DHCP Server...............................................................................................29 DHCP Client .................................

[Page 4] Dynamix UM-S

G.shdsl Router User Manual 152 3 Interface ...................................................................................................................71 Serial Console............

[Page 5] Dynamix UM-S

G.shdsl Router User Manual 152 4 Descriptions The SHDSL (Single-Paired High Speed Digital Subscriber Loop) routers comply with G.991.2 standard with 10/100 Base-T auto-negotiation. ...

[Page 6] Dynamix UM-S

G.shdsl Router User Manual 152 5 Bridging Ø IEEE 802.1D transparent learning bridge Ø IEEE 802.1q VLAN Ø Port-based VLAN (4-port router) Ø Spanning tree protocol Securi...

[Page 7] Dynamix UM-S

G.shdsl Router User Manual 152 6 LAN Interface Ø 4-ports switching hub (4-port router) Ø 10/100 Base-T auto-sensing and auto-negotiation Ø Auto-MDIX (4-port router) Hardwa...

[Page 8] Dynamix UM-S

G.shdsl Router User Manual 152 7 Applications Internet SHDSL Router SHDSL Ethernet DSLAM LAN Connection with DSLAM SHDSL Rou...

[Page 9] Dynamix UM-S

G.shdsl Router User Manual 152 8 Yours Firewall A firewall protects networked computers from intentional hostile intrusion that could compromise confidentiality or result in data co...

[Page 10] Dynamix UM-S

G.shdsl Router User Manual 152 9 Level 5: Application Level 4: TCP Level 3: IP Level 2: Data Link Level 1: Physical Protocol Source/Destination address Source/destination port IP...

[Page 11] Dynamix UM-S

G.shdsl Router User Manual 152 10 Internet 192.168.0.10:1025 192.168.0.11:4406 192.120.8.5 Firewall Internal/Protected NetworkExternal/Unprotected Network PAT (Port Address Translation)...

[Page 12] Dynamix UM-S

G.shdsl Router User Manual 152 11 Level 5: Application Level 4: TCP Level 3: IP Level 2: Data Link Level 1: Physical Telnet FTP Http SMTP Host PC Proxy Server Public Server Req...

[Page 13] Dynamix UM-S

G.shdsl Router User Manual 152 12 Hacker 's System Target System Ping of Death Packet (112,000 bytes) Normal IP Packet (Maximun 65,536 bytes) Normal reassembled Packets bytes fro...

[Page 14] Dynamix UM-S

G.shdsl Router User Manual 152 13 Fraggle Attack- A perpetrator sends a large amount of UDP echo packets at IP broadcast addresses, all of it having a spoofed source address of a vict...

[Page 15] Dynamix UM-S

G.shdsl Router User Manual 152 14 Yours VLAN (Virtual Local Area Network) Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so that they ca...

[Page 16] Dynamix UM-S

G.shdsl Router User Manual 152 15 means that some other device, either the originator of the frame or a VLAN-aware bridge, has mapped this frame into a VLAN and has inserted the approp...

[Page 17] Dynamix UM-S

G.shdsl Router User Manual 152 16 POWER FAULT DATA ALARM LAN 1LAN 2LAN 3LAN 4 WAN 1 WAN 2 WAN 3 WAN 4WAN 5 WAN 6 WAN 7 WAN 8 Backbone ATM Switch VID 30 VID 10 SHDSL Router VID 20 VID 20...

[Page 18] Dynamix UM-S

G.shdsl Router User Manual 152 17 Getting to know about the router This section will introduce hardware of the router. Front Panel T...

[Page 19] Dynamix UM-S

G.shdsl Router User Manual 152 18 Rear Panel The rear panel of SHDSL router is where all of the connections are made. DC-IN LAN CONSO...

[Page 20] Dynamix UM-S

G.shdsl Router User Manual 152 19 SHDSL Line Connector 2-wire4-wire Top View Front View Loop A Loop B Loop B Loop A 14 14 Top View Front View ...

[Page 21] Dynamix UM-S

G.shdsl Router User Manual 152 20 Configuration to the router This guide is designed to lead users through Web Configuration of G.shdsl Router in the easiest and quickest way possib...

[Page 22] Dynamix UM-S

G.shdsl Router User Manual 152 21 The difference Protocol need to setup difference WAN parameters. After knowing the Ptorocol provided by ISP, you have to ask the necessary WAN paramet...

[Page 23] Dynamix UM-S

G.shdsl Router User Manual 152 22 Direct Connection with PC or NB for 1-port router Connection with Hub/Switch for 1-port router Server Storage Serve...

[Page 24] Dynamix UM-S

G.shdsl Router User Manual 152 23 Configuration via Web Browser For Win85, 98 and Me, click the start button. Select setting and control panel . D...

[Page 25] Dynamix UM-S

G.shdsl Router User Manual 152 24 Choose IP address tab. Select Obtain IP address automatically . Click OK button. The window will a...

[Page 26] Dynamix UM-S

G.shdsl Router User Manual 152 25 Basic Setup The Basic Setup contains LAN, WAN, Bridge and Route operation mode. User can use it to completely setup the router. After successfully ...

[Page 27] Dynamix UM-S

G.shdsl Router User Manual 152 26 Bridge Mode PC IP: 192.168.0.2 Netmask: 255.255.255.0 Gateway: 192.168.0.254 VPI:0, VCI:32 Encapsulation:...

[Page 28] Dynamix UM-S

G.shdsl Router User Manual 152 27 The screen will prompt the new configured parameters. Check the parameters and Click Restart The router will reboot with the new setting or Continue...

[Page 29] Dynamix UM-S

G.shdsl Router User Manual 152 28 Routing Mode Routing mode contains DHCP server, DHCP client, DHCP relay, Point-to-Point Protocol over AT...

[Page 30] Dynamix UM-S

G.shdsl Router User Manual 152 29 DHCP Server Dynamic Host Configuration Protocol (DHCP) is a communication protocol that lets network admini...

[Page 31] Dynamix UM-S

G.shdsl Router User Manual 152 30 DHCP Client Some of the ISP provides DHCP server service by which the PC in LAN can access IP information ...

[Page 32] Dynamix UM-S

G.shdsl Router User Manual 152 31 DHCP relay If you have a DHCP server in LAN and you want to use it for DHCP services, the product provides...

[Page 33] Dynamix UM-S

G.shdsl Router User Manual 152 32 PPPoE or PPPoA PPPoA (point-to-point protocol over ATM) and PPPoE (point-to-point protocol over Ethernet) are ...

[Page 34] Dynamix UM-S

G.shdsl Router User Manual 152 33 Type the ISP1 parameters. Username: test Password: test Password Confirm: test Your ISP will provide the user name and password. Idle Time: 10 ...

[Page 35] Dynamix UM-S

G.shdsl Router User Manual 152 34 IPoA or EoA PC VPI:0, VCI:33 Encapsulation: LLC DSLAM ISP BAS IP: 192.168.0.1 Netmask: 255.255.255.0 LAN WA...

[Page 36] Dynamix UM-S

G.shdsl Router User Manual 152 35 The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in EPROM. ...

[Page 37] Dynamix UM-S

G.shdsl Router User Manual 152 36 Advanced Setup Advanced setup contains SHDSL, WAN, Bridge, Route, NAT/DMZ, Virtual server and firewall parameters. ...

[Page 38] Dynamix UM-S

G.shdsl Router User Manual 152 37 SHDSL You can setup the Annex type, data rate and SNR margin for SHDSL parameters in SHDSL. Click SHDSL ...

[Page 39] Dynamix UM-S

G.shdsl Router User Manual 152 38 WAN The SHDSL router supports up to 8 PVCs. WAN 1 was configured via BASIC except QoS. If you want to ...

[Page 40] Dynamix UM-S

G.shdsl Router User Manual 152 39 range of PCR is 64kbps to 2400kbps SCR (Substained Cell Rate): The sustained rate at which you expect to transmit data, voice and video. Consider S...

[Page 41] Dynamix UM-S

G.shdsl Router User Manual 152 40 Bridge If your router is setup in bridge mode and you want to setup advanced filter function, you can ...

[Page 42] Dynamix UM-S

G.shdsl Router User Manual 152 41 VLAN Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so ...

[Page 43] Dynamix UM-S

G.shdsl Router User Manual 152 42 Port-Based VLANs are VLANs where the packet forwarding decision is based on the destination MAC address and its associated port. Click Port-B...

[Page 44] Dynamix UM-S

G.shdsl Router User Manual 152 43 Route If the Router is connected to more than one network, it may be necessary to set up a static rout...

[Page 45] Dynamix UM-S

G.shdsl Router User Manual 152 44 RIP Mode: this parameter determines how the product handle RIP (Routing information protocol). RIP allows it to exchange routing information with ot...

[Page 46] Dynamix UM-S

G.shdsl Router User Manual 152 45 NAT/DMZ NAT (Network Address Translation) is the translation of an Internet Protocol address (IP address...

[Page 47] Dynamix UM-S

G.shdsl Router User Manual 152 46 Multi-NAT: Some of the virtual IP addresses (eg: 192.168.0.10 ~ 192.168.0.50) collectively use two of the global IP addresses (eg: 69.210.1.9 and 6...

[Page 48] Dynamix UM-S

G.shdsl Router User Manual 152 47 Virtual Server For example: Specific ports on the WAN interface are re-mapped to services inside the LAN. As on...

[Page 49] Dynamix UM-S

G.shdsl Router User Manual 152 48 Firewall A firewall is a set of related programs that protects the resources of a private network from oth...

[Page 50] Dynamix UM-S

G.shdsl Router User Manual 152 49 This level enables basic firewall security, all DoS protection, and the SPI filter function. Press Finsih to finish setting firewall. ...

[Page 51] Dynamix UM-S

G.shdsl Router User Manual 152 50 Click Advanced Firewall Security and then press Finish. A SYN flood attack attempts to slow your network by requesting new connections but not ...

[Page 52] Dynamix UM-S

G.shdsl Router User Manual 152 51 If you want to configure the Packet Filtering Parameters, choose Enable and press Add. Select the protocol and configure the ...

[Page 53] Dynamix UM-S

G.shdsl Router User Manual 152 52 Packet Direction Source Destination Protocol Dest. Port Action (Rule) 1 Inbound 192.168.3.4 172.16.1.1 TCP 25 Permit (A) 2 Outbound 172.16.1.1 1...

[Page 54] Dynamix UM-S

G.shdsl Router User Manual 152 53 Rule Order The rules order affects the filtering result. The filtering process will proceed from top to bottom, changing the order as the different...

[Page 55] Dynamix UM-S

G.shdsl Router User Manual 152 54 Administration This session introduces security and simple network management protocol (SNMP) and time synchronous. ...

[Page 56] Dynamix UM-S

G.shdsl Router User Manual 152 55 Security For system secutiry, suggest to change the default user name and password in the first setup ...

[Page 57] Dynamix UM-S

G.shdsl Router User Manual 152 56 SNMP Simple Network Management Protocol (SNMP) provides for the exchange of messages between a networ...

[Page 58] Dynamix UM-S

G.shdsl Router User Manual 152 57 Access Right: Deny for deny all access Access Right: Read for access read only Access Right: Write for access read and write. Community: it serves a...

[Page 59] Dynamix UM-S

G.shdsl Router User Manual 152 58 Time Sync Time synchronization is an essential element for any business that relies on an IT system. The r...

[Page 60] Dynamix UM-S

G.shdsl Router User Manual 152 59 Utility This section will describe the utility of the product including system information, load the factory default configuration, upgrade the fir...

[Page 61] Dynamix UM-S

G.shdsl Router User Manual 152 60 System Info Click System Info for review the information. The browser will prompt t...

[Page 62] Dynamix UM-S

G.shdsl Router User Manual 152 61 Config Tool This configuration tool has three functions: load Factory Default, Restore Configuration and Ba...

[Page 63] Dynamix UM-S

G.shdsl Router User Manual 152 62 Upgrade You can upgrade the gateway using the upgrade function. Press Upgrade. ...

[Page 64] Dynamix UM-S

G.shdsl Router User Manual 152 63 Logout To logout the router, press logout. ...

[Page 65] Dynamix UM-S

G.shdsl Router User Manual 152 64 Restart For restarting the router, click the Restart in UTILITY. Press...

[Page 66] Dynamix UM-S

G.shdsl Router User Manual 152 65 Status You can monitor the SHDSL status including mode, Tx power and Bitrate and Performance information including SNR margin, atteunation and CRC ...

[Page 67] Dynamix UM-S

G.shdsl Router User Manual 152 66 LAN-to-LAN connection with bridge Mode CO side Click Bridge and CO Side to setup Bridging mode of the...

[Page 68] Dynamix UM-S

G.shdsl Router User Manual 152 67 CPE Side Click Bridge and CO Side to setup Bridging mode of the Router and then click Next. ...

[Page 69] Dynamix UM-S

G.shdsl Router User Manual 152 68 LAN to LAN Connection with Routing Mode IP: 192.168.20.1 Netmask: 255.255.255.0 STU-C (CO) STU-R (CPE) Router IP: 192.168.20.100 Netmask: 255.255.25...

[Page 70] Dynamix UM-S

G.shdsl Router User Manual 152 69 IP Address: 192.168.20.1 Subnet mask: 255.255.255.0 Gateway: 192.169.30.2 Click Next The screen will prompt the parameters that...

[Page 71] Dynamix UM-S

G.shdsl Router User Manual 152 70 CPE side Click ROUTE and CPE Side then press Next. Type LAN parameters: IP Address: 192....

[Page 72] Dynamix UM-S

G.shdsl Router User Manual 152 71 Configuration via Serial Console or Telnet with Manu Driven Interface Serial Console Check the connectivity...

[Page 73] Dynamix UM-S

G.shdsl Router User Manual 152 72 Operation Interface For serial console and Telnet management, the ROUTER implements two operational interfaces: comma...

[Page 74] Dynamix UM-S

G.shdsl Router User Manual 152 73 Window structure From top to bottom, the window will be divided into four parts: 1. Product name 2. Menu field: Men...

[Page 75] Dynamix UM-S

G.shdsl Router User Manual 152 74 Menu Driven Interface Commands Before changing the configuration, familiarize yourself with the operations list in the following ...

[Page 76] Dynamix UM-S

G.shdsl Router User Manual 152 75 Enable Setup Status Show Write Reboot Ping Admin Utility Exit Upgrade Backup Restore User Security SNMP Password ID SNTP Clear Modify List Attrib Profi...

[Page 77] Dynamix UM-S

G.shdsl Router User Manual 152 76 Configuration To setup the router, move the cursor “ >> ” to enable and press enter key. While...

[Page 78] Dynamix UM-S

G.shdsl Router User Manual 152 77 Status You can view running system status of SHDSL, WAN, route and interface via status command. ...

[Page 79] Dynamix UM-S

G.shdsl Router User Manual 152 78 Show You can view the system information, configuration and configuration in command script by show...

[Page 80] Dynamix UM-S

G.shdsl Router User Manual 152 79 Write For any changes of configuration, you must write the new configuration to EPROM using write ...

[Page 81] Dynamix UM-S

G.shdsl Router User Manual 152 80 Reboot To reboot the router, use reboot command. Move cursor to “ >> “ to write and pr...

[Page 82] Dynamix UM-S

G.shdsl Router User Manual 152 81 Ping Ping command will be used to test the connection of router. Move cursor “ >> “ to ...

[Page 83] Dynamix UM-S

G.shdsl Router User Manual 152 82 Administration You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol), su...

[Page 84] Dynamix UM-S

G.shdsl Router User Manual 152 83 Security Security command can be configured sixteen legal IP address for telnet access and telnet port nu...

[Page 85] Dynamix UM-S

G.shdsl Router User Manual 152 84 The screen will prompt as follow: >> edit Edit trap host parameter list Show trap configuration Supervisor Password and ID ...

[Page 86] Dynamix UM-S

G.shdsl Router User Manual 152 85 To configure SNTP v4 time synchronization, follow the below procedures. move the cursor to method and press enter. ---------------------------...

[Page 87] Dynamix UM-S

G.shdsl Router User Manual 152 86 Utility There are three utility tools, upgrade, backup and restore, embedded in the firmware. You ca...

[Page 88] Dynamix UM-S

G.shdsl Router User Manual 152 87 Setup All of the setup parameters are located in the subdirectories of setup. Move the cursor “ &g...

[Page 89] Dynamix UM-S

G.shdsl Router User Manual 152 88 Clear command can clear CRC error count. Generally, you cannot need to change SNR margin, which range is from 0 to 10. SNR margin is an index of ...

[Page 90] Dynamix UM-S

G.shdsl Router User Manual 152 89 ISP command can configure account name, password and idle time. Idle time are from 0 minute to 300 minutes. Most of the ISP use dynamic IP for PP...

[Page 91] Dynamix UM-S

G.shdsl Router User Manual 152 90 VLAN Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so ...

[Page 92] Dynamix UM-S

G.shdsl Router User Manual 152 91 VLAN port status is a 12-digit binary number whose bit-1 location indicates the VLAN port membership in which 4MSBs and 8MSB represents LAN ports and ...

[Page 93] Dynamix UM-S

G.shdsl Router User Manual 152 92 network. You can setup 20 sets of static route in static command. After entering static menu, the screen will show as follow: >> a...

[Page 94] Dynamix UM-S

G.shdsl Router User Manual 152 93 Attrib command can configure RIP mode, authentication type and Poison reverse mode. Version command can configure RIP protocol version. Aut...

[Page 95] Dynamix UM-S

G.shdsl Router User Manual 152 94 The virtual menu contains range of virtual IP address, delete virtual IP address and show virtual IP address. >> range Edit virtual IP...

[Page 96] Dynamix UM-S

G.shdsl Router User Manual 152 95 You can delete global IP address range- from 1 to 5- by using delete command. You can view the global IP address range via list command. ...

[Page 97] Dynamix UM-S

G.shdsl Router User Manual 152 96 ---------------------------------------------------------------------- Command: setup ip_share pat modify <1~10> Message: Please input the foll...

[Page 98] Dynamix UM-S

G.shdsl Router User Manual 152 97 After enabling the DMZ, shift the cursor to address and press enter. ---------------------------------------------------------------------- Comma...

[Page 99] Dynamix UM-S

G.shdsl Router User Manual 152 98 >> protocol Configure protocol type direction Configure direction mode src_ip Configure source IP parameter dest_ip Configure des...

[Page 100] Dynamix UM-S

G.shdsl Router User Manual 152 99 (ping) to the network address of one system. This system is known as the amplifier. The return address of the ping has been faked (spoofed) to appear ...