Datalogic MAGELLAN 1000I Product Reference Manual

Download or browse on-line these Product Reference Manual for Datalogic MAGELLAN 1000I Barcode Reader, Scanner.

Datalogic MAGELLAN 1000I Manual Information:

This manual for Datalogic MAGELLAN 1000I, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 160 pages, and the size of the file at download is 0.89 Mb. The document type is Product Reference Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Datalogic MAGELLAN 1000I. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Datalogic MAGELLAN 1000I

Magellan ® 1000i Omni-Directional Imaging Scanner Product Reference Guide ...

[Page 2] Datalogic MAGELLAN 1000I

Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reprodu...

[Page 3] Datalogic MAGELLAN 1000I

Product Reference Guide i-i Table of Contents About This Manual ............................................................................................................... 1-1 Manual Conventions ......................................................

[Page 4] Datalogic MAGELLAN 1000I

i-ii Magellan ® 1000i Bar/Space Polarity .................................................................................... 3-27 Wand Idle State ........................................................................................ 3-27 Signal...

[Page 5] Datalogic MAGELLAN 1000I

Product Reference Guide i-iii Code 39 Full ASCII .......................................................................................................5-25 Length Control ..............................................................................

[Page 6] Datalogic MAGELLAN 1000I

i-iv Magellan ® 1000i Minimum Reads ........................................................................................................... 5-63 Optical and Read Performance Parameters ............................................................

[Page 7] Datalogic MAGELLAN 1000I

Product Reference Guide 1-1 Chapter 1 Getting Started The Magellan ® 1000i Omni-Directional Imaging Scanner offers hands-free scanning for small, easily handled items and handheld scanning for bulkier items. Its aggressive imaging perfor- mance and...

[Page 8] Datalogic MAGELLAN 1000I

Getting Started 1-2 Magellan ® 1000i Connecting the Scanner The scanner kit you ordered to match your interface should provide a compatible cable for your installation. Use the appropriate instructions below to connect the scanner to the terminal,...

[Page 9] Datalogic MAGELLAN 1000I

Programming Product Reference Guide 1-3 Wand Emulation Connection — Connect the scanner to the appropriated port on the ter- minal/PC using the correct cable for the interface type you ordered. Reference Figure 2. IBM ...

[Page 10] Datalogic MAGELLAN 1000I

Getting Started 1-4 Magellan ® 1000i LED and Beeper Indicators The scanner’s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner. The tables below list these indications. One exception to the beh...

[Page 11] Datalogic MAGELLAN 1000I

Error Codes Product Reference Guide 1-5 Error Codes Upon startup, if the scanner flashes its indicator LED or sounds an unexpected series of beep tones (other than normal power-up indications), this means the scanner has ...

[Page 12] Datalogic MAGELLAN 1000I

Getting Started 1-6 Magellan ® 1000i NOTES ...

[Page 13] Datalogic MAGELLAN 1000I

Product Reference Guide 2-1 Chapter 2 General Features Double Read Timeout The Double Read Timeout feature sets a time limit that determines how much time must pass before reading the same label again (e.g. two identical items in succession). START ...

[Page 14] Datalogic MAGELLAN 1000I

General Features 2-2 Magellan ® 1000i Double Read Timeout — cont. START / END PROGRAMMING BARCODES 0.7 Second 0.8 Second 0.9 Second 1 Second ...

[Page 15] Datalogic MAGELLAN 1000I

Label Gone Timeout Product Reference Guide 2-3 Label Gone Timeout This feature sets the time after the last label segment is seen before the scanner prepares for a new label. Productivity Index Reporting (PIR) When PIR is...

[Page 16] Datalogic MAGELLAN 1000I

General Features 2-4 Magellan ® 1000i Sleep Mode This feature specifies the amount of time with no bar code reads before the scanner enters sleep mode. START / END PROGRAMMING BARCODES 15 Seconds 30 Seconds 1 Minute 2 Minutes 3 Minutes 4 Minutes 5 ...

[Page 17] Datalogic MAGELLAN 1000I

Sleep Mode Product Reference Guide 2-5 Sleep Mode — cont. START / END PROGRAMMING BARCODES 6 Minutes 7 Minutes 8 Minutes 9 Minutes 10 Minutes DEFAULT 12 Minutes 15 Minutes 30 Minutes 1 Hour ...

[Page 18] Datalogic MAGELLAN 1000I

General Features 2-6 Magellan ® 1000i LED and Beeper Indicators Power On Alert Disables or enables the indication (a single beep) that the scanner has finished all its power up tests and is now ready for operation. START / END PROGRAMMING BARCODES...

[Page 19] Datalogic MAGELLAN 1000I

LED and Beeper Indicators Product Reference Guide 2-7 Good Read: When to Indicate This feature specifies when the scanner will provide indication (beep and/or flash its green LED) upon successfully reading a bar code. Cho...

[Page 20] Datalogic MAGELLAN 1000I

General Features 2-8 Magellan ® 1000i Good Read Beep Control This feature enables/disables the scanner’s ability to beep upon a successful decode of a bar code. Good Read Beep Frequency Adjusts the good read beep to sound at a selectable low, med...

[Page 21] Datalogic MAGELLAN 1000I

LED and Beeper Indicators Product Reference Guide 2-9 Good Read Beep Length Specifies the duration of a good read beep. START / END PROGRAMMING BARCODES 60msec 80msec DEFAULT 100msec 120msec 140msec 160msec 180msec 200msec...

[Page 22] Datalogic MAGELLAN 1000I

General Features 2-10 Magellan ® 1000i Good Read Beep Volume Selects the beeper volume (loudness) upon a good read beep. There are three selectable volume levels. START / END PROGRAMMING BARCODES Low Medium High DEFAULT ...

[Page 23] Datalogic MAGELLAN 1000I

Scanning Features Product Reference Guide 2-11 Scanning Features Targeted Scanning Mode Upon pressing the button, the scanner will project an aiming pattern to assist in centering over the bar code. Scanning then takes pl...

[Page 24] Datalogic MAGELLAN 1000I

General Features 2-12 Magellan ® 1000i Target Mode Linger Time Specifies the time duration the scanner remains in the targeted mode of operation after reading a bar code before reverting to Omni-directional Mode. START / END PROGRAMMING BARCODES ...

[Page 25] Datalogic MAGELLAN 1000I

Scanning Features Product Reference Guide 2-13 Wake Up Intensity This feature indicates the percentage of ambient light change which will trigger the scanner to wake up from Sleep Mode. Lower settings provide greater sens...

[Page 26] Datalogic MAGELLAN 1000I

General Features 2-14 Magellan ® 1000i Wake Up Intensity — cont. START / END PROGRAMMING BARCODES 13% 14% 15% ...

[Page 27] Datalogic MAGELLAN 1000I

Product Reference Guide 3-1 Chapter 3 Interface Related Features At the time of this writing, the Scanner supports the interfaces listed in Ta bl e 3 - 1. Select the desired interface type from the table, then reference the page number given for the...

[Page 28] Datalogic MAGELLAN 1000I

Interface Related Features 3-2 Magellan ® 1000i Table 3-2. Keyboard Wedge Interface Reference I/F Type PCs Supported A PC/XT w/Alternate Key Encoding B AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Key Encoding C PS/2 25 an...

[Page 29] Datalogic MAGELLAN 1000I

Interface Selection Product Reference Guide 3-3 Interface Selection START / END PROGRAMMING BARCODES RS-232 Standard RS-232 Wincor-Nixdorf IBM 4683 Port 5B IBM 4683 Port 9B IBM 4683 Port 17 IBM USB USB Keyboard Wand Emulat...

[Page 30] Datalogic MAGELLAN 1000I

Interface Related Features 3-4 Magellan ® 1000i Interface Selection — cont. START / END PROGRAMMING BARCODES Keyboard Wedge B Keyboard Wedge C Keyboard Wedge D Keyboard Wedge E Keyboard Wedge F Keyboard Wedge G Keyboard Wedge H Keyboard Wedge I K...

[Page 31] Datalogic MAGELLAN 1000I

Interface Selection Product Reference Guide 3-5 Interface Selection — cont. START / END PROGRAMMING BARCODES Keyboard Wedge K Keyboard Wedge L Keyboard Wedge M Keyboard Wedge N Keyboard Wedge O Keyboard Wedge P Keyboard ...

[Page 32] Datalogic MAGELLAN 1000I

Interface Related Features 3-6 Magellan ® 1000i Interface Selection — cont. START / END PROGRAMMING BARCODES Keyboard Wedge T Keyboard Wedge U Keyboard Wedge V Keyboard Wedge W Keyboard Wedge X Keyboard Wedge Y ...

[Page 33] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-7 Interface Features Obey/Ignore Host Commands When set to ignore host commands, the scanner will ignore all host commands except for the minimum set necessary to keep the inte...

[Page 34] Datalogic MAGELLAN 1000I

Interface Related Features 3-8 Magellan ® 1000i Interface Features — cont. Host Transmission Buffers Specifies the number of host transmission(s) that may be buffered. By buffering data from a bar code, the scanner can continue to read a new bar...

[Page 35] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-9 RS-232 Interface Features START / END PROGRAMMING BARCODES 1200 Baud 2400 Baud 4800 Baud 9600 Baud DEFAULT 19200 Baud 38400 Baud 57600 Baud 115200 Baud ...

[Page 36] Datalogic MAGELLAN 1000I

Interface Related Features 3-10 Magellan ® 1000i RS-232 Interface Features — cont. START / END PROGRAMMING BARCODES 7 Data Bits 8 Data Bits DEFAULT 1 Stop Bit DEFAULT 2 Stop Bits Parity = None DEFAULT Parity = Even Parity = Odd ...

[Page 37] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-11 RS-232 Interface Features — cont. Hardware Flow Control Disable Hardware Control— The scanner transmits to the host regardless of any activity on the CTS line. Enable C...

[Page 38] Datalogic MAGELLAN 1000I

Interface Related Features 3-12 Magellan ® 1000i RS-232 Interface Features — cont. Intercharacter Delay This delay is inserted after each data character transmitted. If the transmission speed is too high, the system may not be able to receive al...

[Page 39] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-13 Intercharacter Delay — cont. Software Flow Control Disables/Enables software control using XON/XOFF characters. START / END PROGRAMMING BARCODES Interchar Delay = 80 msec I...

[Page 40] Datalogic MAGELLAN 1000I

Interface Related Features 3-14 Magellan ® 1000i RS-232 Interface Features — cont. Host Echo When enabled, this feature passes all data through the scanner to the host as it comes in. This feature is used for applications where “daisy chaining...

[Page 41] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-15 RS-232 Interface Features — cont. Host Echo Quiet Interval This setting specifies the time interval of RS-232 channel inactivity which must transpire before the scanner wi...

[Page 42] Datalogic MAGELLAN 1000I

Interface Related Features 3-16 Magellan ® 1000i Host Echo Quiet Interval — cont. Signal Voltage: Normal/TTL Specifies whether the RS-232 interface provides TTL levels on the output pins TxD and RTS. START / END PROGRAMMING BARCODES Host Echo Qui...

[Page 43] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-17 RS-232 Invert Enables/disables inversion of RS-232 TXD and RXD signals. Beep on ASCII BEL Enables/disables ability of scanner to beep (sound a good read tone) on receiving an...

[Page 44] Datalogic MAGELLAN 1000I

Interface Related Features 3-18 Magellan ® 1000i Beep on Not on File Select for the host to beep (or not) when a not-on-file (host command) condition is detected by the host. START / END PROGRAMMING BARCODES Disable Beep on Not On File Enable Beep...

[Page 45] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-19 ACK NAK Options This enables/disables the ability of the scanner to support the RS-232 ACK/NAK protocol. When configured, the scanner and/or host sends an “ACK” when it ...

[Page 46] Datalogic MAGELLAN 1000I

Interface Related Features 3-20 Magellan ® 1000i RS-232 Interface Features — cont. — cont. ACK Character NAK Character START / END PROGRAMMING BARCODES Sets the ACK character from the set of ASCII characters or any decimal value from 000 to 255...

[Page 47] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-21 RS-232 Interface Features — cont. Retry on ACK NAK Timeout Enables/disables retry after the configurable ACK NAK Timeout Value (set in the following fea- ture) has expired....

[Page 48] Datalogic MAGELLAN 1000I

Interface Related Features 3-22 Magellan ® 1000i RS-232 Interface Features — cont. ACK NAK Retry Count START / END PROGRAMMING BARCODES This feature sets the number of times for the scanner to retry a label transmission under a retry condition. 0...

[Page 49] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-23 ACK NAK Error Handling This item specifies the method the scanner will use to handle errors detected while waiting to receive the ACK character from the host. Errors include...

[Page 50] Datalogic MAGELLAN 1000I

Interface Related Features 3-24 Magellan ® 1000i RS-232 Interface Features — cont. Transmission Failure Indication Enables/disables bad-label indication upon transmission failure. IBM-USB Interface Features IBM-USB Device usage The IBM-USB protoc...

[Page 51] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-25 IBM IBM Transmit Labels in Code 39 Format This feature enables/disables scanner's ability to set a symbology identifier for a specified label to Code 39 before transmit...

[Page 52] Datalogic MAGELLAN 1000I

Interface Related Features 3-26 Magellan ® 1000i Wand Emulation Supported Symbologies The Wand Emulation interface will transmit bar code data as a wand device would. This inter- face will transmit the following bar code symbologies: •UPC/EAN �...

[Page 53] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-27 Wand Emulation — cont. Bar/Space Polarity Low/High — Black will be transmitted as a low voltage level (0 to +0.7V) and space as high level (+2.4 to +5.25V). High/Low �...

[Page 54] Datalogic MAGELLAN 1000I

Interface Related Features 3-28 Magellan ® 1000i Wand Emulation — cont. Signal Speed The speed of the transmission can be set. This selects the width of the minimum narrow bar. 330 microseconds 660 microseconds Transmit Trailing Noise The transm...

[Page 55] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-29 Wand Emulation — cont. Transmit Leading Noise The transmission of noise pulses before the bar code may be enabled or disabled. Symbology Conversion Wand Emulation can conve...

[Page 56] Datalogic MAGELLAN 1000I

Interface Related Features 3-30 Magellan ® 1000i Keyboard Wedge and USB Keyboard As a keyboard interface, the scanner supports most popular PCs and IBM terminals. The instal- lation of the wedge is a fairly simple process that doesn’t require any...

[Page 57] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-31 Keyboard Wedge — cont. START / END PROGRAMMING BARCODES Italy Norway Portugal Spain Sweden Switzerland Japan 106 Key Hungary Czech ...

[Page 58] Datalogic MAGELLAN 1000I

Interface Related Features 3-32 Magellan ® 1000i Keyboard Wedge — cont. Caps Lock State Specifies the format in which the scanner sends character data. START / END PROGRAMMING BARCODES Slovakia Romania Croatia Poland START / END PROGRAMMING BARCO...

[Page 59] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-33 Keyboard Wedge — cont. Power-On Simulation All PCs check the keyboard status during the power-on Selftest. It is recommended that you enable this function if you are worki...

[Page 60] Datalogic MAGELLAN 1000I

Interface Related Features 3-34 Magellan ® 1000i Control Characters Specifies how the scanner transmits ASCII control characters to the host. Choices are: • Disable Control Characters • Enable transmission of control characters to host • Send...

[Page 61] Datalogic MAGELLAN 1000I

Interface Features Product Reference Guide 3-35 Keyboard Wedge — cont. Wedge Quiet Interval Quiet Interval is the amount of time to look for keyboard activity before the scanner breaks the keyboard connection in order t...

[Page 62] Datalogic MAGELLAN 1000I

Interface Related Features 3-36 Magellan ® 1000i Keyboard Wedge — cont. Intercharacter Delay NOTE This feature does not apply to the USB Keyboard interface. START / END PROGRAMMING BARCODES One-half of the delay specified below is inserted betwee...

[Page 63] Datalogic MAGELLAN 1000I

Product Reference Guide 4-1 Chapter 4 Data Editing Data Editing Overview When a bar code is scanned, additional information can be sent to the host computer along with the bar code data. This combination of bar code data and supplementary user-defi...

[Page 64] Datalogic MAGELLAN 1000I

Data Editing 4-2 Magellan ® 1000i • Enter prefixes and suffixes in the order in which you want them to appear on the output. Global Prefix/Suffix Up to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/ or ...

[Page 65] Datalogic MAGELLAN 1000I

Global Prefix/Suffix Product Reference Guide 4-3 Global Prefix/Suffix — cont. START / END PROGRAMMING BARCODES Sets up to 20 characters each from the set of ASCII characters or any hex value from 0 to FF. To configure th...

[Page 66] Datalogic MAGELLAN 1000I

Data Editing 4-4 Magellan ® 1000i AIM ID AIM (Automatic Identification Manufacturers) label identifiers are assigned from a globally standardized list — as opposed to custom label ID characters you select yourself — and can be included with s...

[Page 67] Datalogic MAGELLAN 1000I

Label ID Product Reference Guide 4-5 Label ID A Label ID is a customizable code of up to two ASCII characters (00-FF), used to identify a bar code (symbology) type. See Appendix D, Default Settings, for a listing for com...

[Page 68] Datalogic MAGELLAN 1000I

Data Editing 4-6 Magellan ® 1000i Label ID — cont. START / END PROGRAMMING BARCODES Label ID Transmission: Disable Label ID Position: Before Bar Code Data DEFAULT Label ID Position: After Bar Code Data Set UPC-A Label ID Character(s) DEFAULT SET...

[Page 69] Datalogic MAGELLAN 1000I

Label ID Product Reference Guide 4-7 Label ID — cont. START / END PROGRAMMING BARCODES DEFAULT SETTING FOR THIS FEATURE: E (45 hex) Set UPC-E w/P2 Addon Label ID Character(s) Set UPC-E w/P5 Addon Label ID Character(s) DE...

[Page 70] Datalogic MAGELLAN 1000I

Data Editing 4-8 Magellan ® 1000i Label ID — cont. START / END PROGRAMMING BARCODES DEFAULT SETTING FOR THIS FEATURE: F (46 hex) Set EAN-13 w/P2 Addon Label ID Character(s) Set EAN-13 w/P5 Addon Label ID Character(s) DEFAULT SETTING FOR THIS FEAT...

[Page 71] Datalogic MAGELLAN 1000I

Label ID Product Reference Guide 4-9 Label ID — cont. START / END PROGRAMMING BARCODES DEFAULT SETTING FOR THIS FEATURE: G8 (4738 hex) Set GTIN w/C128 addon Label ID Character(s) Set RSS-14 Label ID Character(s) DEFAULT...

[Page 72] Datalogic MAGELLAN 1000I

Data Editing 4-10 Magellan ® 1000i Label ID — cont. START / END PROGRAMMING BARCODES DEFAULT SETTING FOR THIS FEATURE: % (25 hex) Set Codabar Label ID Character(s) Set Code 93 Label ID Character(s) DEFAULT SETTING FOR THIS FEATURE: & (26 hex)...

[Page 73] Datalogic MAGELLAN 1000I

Case Conversion Product Reference Guide 4-11 Case Conversion This feature can convert scanned bar code data to either all lower case (a through z) or all upper case (A through Z) characters. NOTE Case conversion affects O...

[Page 74] Datalogic MAGELLAN 1000I

Data Editing 4-12 Magellan ® 1000i Character Conversion Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs represented in hexadecimal ASCII values. The first character in the pair is the character tha...

[Page 75] Datalogic MAGELLAN 1000I

Product Reference Guide 5-1 Chapter 5 Symbologies The scanner supports the following symbologies (bar code types). Options for each symbology are included in this chapter. Factory Defaults — for the standard RS-232 interface are indicated in bold...

[Page 76] Datalogic MAGELLAN 1000I

Symbologies 5-2 Magellan ® 1000i UPC-A — continued Check Digit Transmission Enable this option to transmit the check digit along with UPC-A bar code data. Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this feature...

[Page 77] Datalogic MAGELLAN 1000I

UPC-A Product Reference Guide 5-3 UPC-A — continued Number System Transmission This feature enables/disables transmission of UPC-A System Number. UPC-A Minimum Reads This feature specifies the minimum number of consecuti...

[Page 78] Datalogic MAGELLAN 1000I

Symbologies 5-4 Magellan ® 1000i UPC-A — continued UPC-A In-store Minimum Reads This feature specifies the minimum number of consecutive times an in-store printed label must be decoded before it is accepted as good read. START / END PROGRAMMING ...

[Page 79] Datalogic MAGELLAN 1000I

UPC-E Product Reference Guide 5-5 UPC-E The following options apply to the UPC-E symbology. Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. Check Digit Transmission Enable this option to tran...

[Page 80] Datalogic MAGELLAN 1000I

Symbologies 5-6 Magellan ® 1000i UPC-E — continued Number System Digit The Number System Digit (NSD) which is always a zero (0) in the leading position can be optionally included (or not) with scanned bar code data. Expand to UPC-E to UPC-A Enab...

[Page 81] Datalogic MAGELLAN 1000I

UPC-E Product Reference Guide 5-7 UPC-E — continued Expand UPC-E to EAN13 Enables/disables expansion of UPC-E labels to EAN-13. Selecting this feature also changes the symbology ID to match those required for EAN-13. Mi...

[Page 82] Datalogic MAGELLAN 1000I

Symbologies 5-8 Magellan ® 1000i GTIN The following options apply to the GTIN label data format. Expand UPC/EAN to GTIN When this feature is enabled, the scanner will translate UPC/EAN labels to the 14 digit GTIN format. START / END PROGRAMMING BA...

[Page 83] Datalogic MAGELLAN 1000I

EAN-13 Product Reference Guide 5-9 EAN-13 The following options apply to the EAN-13 symbology. Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. Check Digit Transmission Enable this option to...

[Page 84] Datalogic MAGELLAN 1000I

Symbologies 5-10 Magellan ® 1000i EAN-13 — continued EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN13 Flag1 character. ISBN When enabled, this feature truncates the leading three digits from labels that contain ISBN (Interna...

[Page 85] Datalogic MAGELLAN 1000I

EAN-13 Product Reference Guide 5-11 EAN-13 — continued Minimum Reads This feature specifies the minimum number of consecutive times an EAN-13 label must be decoded before it is accepted as good read. START / END PROGRAM...

[Page 86] Datalogic MAGELLAN 1000I

Symbologies 5-12 Magellan ® 1000i EAN-8 The following options apply to the EAN-8 symbology. Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar codes. Check Digit Transmission Enable this option to transmit the check Digit along...

[Page 87] Datalogic MAGELLAN 1000I

EAN-8 Product Reference Guide 5-13 EAN-8 — continued Expand EAN-8 to EAN-13 — Expands EAN-8 data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13. Min...

[Page 88] Datalogic MAGELLAN 1000I

Symbologies 5-14 Magellan ® 1000i Enable EAN Two-Label Enables/disables the ability of the scanner to decode EAN two-label pairs. START / END PROGRAMMING BARCODES Disable EAN Two-Label Enable EAN Two-Label ...

[Page 89] Datalogic MAGELLAN 1000I

Add-ons Product Reference Guide 5-15 Add-ons Add-ons (or supplemental characters) are commonly added to the end of UPC/EAN bar codes. The scanner will read the add-ons if they are enabled and in the field of view. Three a...

[Page 90] Datalogic MAGELLAN 1000I

Symbologies 5-16 Magellan ® 1000i Add-ons — continued START / END PROGRAMMING BARCODES Disable Optional 2-Digit Add-ons DEFAULT Enable Optional 2-Digit Add-ons Disable Optional 5-Digit Add-ons DEFAULT Enable Optional 5-Digit Add-ons Disable Optio...

[Page 91] Datalogic MAGELLAN 1000I

RSS-14 Product Reference Guide 5-17 RSS-14 The following options apply to the RSS-14 symbology. Disable/Enable RSS-14 When this feature is disabled, the scanner will not read RSS-14 bar codes. UCC/EAN 128 Emulation When en...

[Page 92] Datalogic MAGELLAN 1000I

Symbologies 5-18 Magellan ® 1000i RSS-14 — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS-14 label must be decoded before it is accepted as good read. START / END PROGRAMMING BARCODES Minimum = 1 Re...

[Page 93] Datalogic MAGELLAN 1000I

RSS Expanded Product Reference Guide 5-19 RSS Expanded The following options apply to the RSS Expanded symbology. Disable/Enable RSS Expanded When this feature is disabled, the scanner will not read RSS Expanded bar codes....

[Page 94] Datalogic MAGELLAN 1000I

Symbologies 5-20 Magellan ® 1000i RSS Expanded — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Var...

[Page 95] Datalogic MAGELLAN 1000I

RSS Expanded Product Reference Guide 5-21 RSS Expanded — continued RSS Expanded Length 1, Length 2 Programming Instructions 1. Scan the START/END bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. Tur...

[Page 96] Datalogic MAGELLAN 1000I

Symbologies 5-22 Magellan ® 1000i RSS Expanded — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS Expanded label must be decoded before it is accepted as good read. START / END PROGRAMMING BARCODES Mi...

[Page 97] Datalogic MAGELLAN 1000I

Code 39 Product Reference Guide 5-23 Code 39 The following options apply to the Code 39 symbology. Disable/Enable Code 39 When this feature is disabled, the scanner will not read Code 39 bar codes. Check Character Calculat...

[Page 98] Datalogic MAGELLAN 1000I

Symbologies 5-24 Magellan ® 1000i Check Character Transmit Enable this option to transmit the check character with scanned bar code data. Start/Stop Characters Enables/disables transmission of Code39 start and stop characters. START / END PROGRAMMI...

[Page 99] Datalogic MAGELLAN 1000I

Code 39 Product Reference Guide 5-25 Code 39 Full ASCII Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters. START / END PROGRAMMING BARCODES Disable Code 39 Full ASCII DEFAULT Enable Co...

[Page 100] Datalogic MAGELLAN 1000I

Symbologies 5-26 Magellan ® 1000i Code 39 — continued Length Control Fixed Length Decoding — When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable...