Firex FADC Users Manual

Download or browse on-line these Operation & User’s Manual for Firex FADC Smoke Alarm.

Firex FADC Manual Information:

This manual for Firex FADC, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 12 pages, and the size of the file at download is 0.24 Mb. The document type is Operation & User’s Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Firex FADC. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Firex FADC

SMOKE ALARM FEATURES • This smoke alarm is powered by 120V AC and a 9-volt battery back-up source. AC/DC smoke alarms offer added protection in the event of a power failure or a drained battery. • Unique power connector prevents interconnection w...

[Page 2] Firex FADC

IMPORTANT SAFETY INFORMATION PLEASE READ AND SAVE THESE INSTRUCTIONS WARNING • This smoke alarm requires constant 120-volt, AC power AND a working 9-volt battery to operate properly. This smoke alarm WILL NOT work if AC power is not connected or h...

[Page 3] Firex FADC

fast-burning, explosive, or intentional. Others are caused by care- lessness or safety hazards. Smoke may not reach the smoke alarm QUICKLY ENOUGH to ensure safe escape. • Smoke alarms have limitations. This smoke alarm is not foolproof and is not ...

[Page 4] Firex FADC

FOR BEST PROTECTION, WE RECOMMEND THAT YOU INSTALL A SMOKE ALARM IN EVERY ROOM. In addition, we recommend that all smoke alarms be interconnected. Typical Efficiency Home (Apartment) • Install a smoke alarm on the ceiling or wall closest to the ...

[Page 5] Firex FADC

IMPORTANT SMOKE ALARM PLACEMENT AND EXCEPTION INFORMATION • Install a smoke alarm as close to the center of the ceiling as possi- ble. If this is not practical, mount no closer than 4 inches from a wall or corner. Also, if local codes allow, instal...

[Page 6] Firex FADC

HOW TO INSTALL THIS SMOKE ALARM DANGER: ELECTRICAL SHOCK HAZARD. Turn off power at the main fuse box or circuit breaker by removing the fuse or switching the circuit breaker to the OFF position. WARNING: This smoke alarm should be installed only ...

[Page 7] Firex FADC

10. Position smoke alarm to mounting plate and turn clockwise to lock into place. For tamper-resist, use long-nosed pliers to remove thin plastic from notch on smoke alarm edge. Insert pin into notch on edge of smoke alarm after smoke alarm is positi...

[Page 8] Firex FADC

FALSE ALARM CONTROL Model FADC features a False Alarm Control that, when activated, quiets unwanted alarms for up to 15 minutes. To use the False Alarm Control: Press and release the test button during an unwanted alarm. The alarm should stop within ...

[Page 9] Firex FADC

NOTE: If smoke alarms are interconnected, all smoke alarms should sound an alarm within three seconds after any test button is pushed and the tested smoke alarm sounds. 3. If smoke alarm does not sound, turn off power at main fuse box or circuit brea...

[Page 10] Firex FADC

REPAIR CAUTION: Do not attempt to repair this smoke alarm. Doing so will void your warranty. If smoke alarm is not operating properly, see “TROUBLESHOOTING.” If necessary and if still under warranty, return smoke alarm to Invensys Controls Ame...

[Page 11] Firex FADC

PROBLEM SOLUTION Smoke alarm does not 1. Check that AC power sound when tested. is turned on. 2. Turn off power. Remove smoke alarm from mounting plate and: a. check that connector plug is securely attached. b. check that battery is proper- ly attac...

[Page 12] Firex FADC

WHERE TO SEND YOUR SMOKE ALARM FOR SERVICE To return smoke alarms under warranty, send the smoke alarm with postage prepaid, a note describing the nature of the difficulty, and proof of date of purchase to: To return Ultralife 10-year lithium batter...