Fostex 8360 Owner's Manual

[Page 1] Fostex 8360

Model 8360 Owner’s Manual (Ether card for the Model D2424 / D2424LV) Table of Contents Introduction ...............................................................................2 Installing the ether card ............................................

[Page 2] Fostex 8360

Currently we confirm that the following FTP client applications can be used with the Model 8360. FTP client applications Thank you very much for purchasing the Fostex product. The Model 8360 is an ether card dedicated for the D2424/D2424LV digital mu...

[Page 3] Fostex 8360

There are two types for connecting the recorder to a personal computer using the LAN cable; one to one connection and LAN connection. The following describes how to make connection for each type. Connecting to a personal computer 1 2 3 4 5 6 7 8 1 2 ...

[Page 4] Fostex 8360

Connection to an existing LAN To connect the recorder to an existing LAN, use a "straight cable of category 5 or higher" for connection between the recorder and a hub, as shown below. <Note> When connecting the recorder to an existing...

[Page 5] Fostex 8360

Make the settings in the "TCP/IP Setup?" menu which is added to the setup mode of the recorder so that the Model 8360 can be used as an FTP server. TCP/IP setting (recorder's initial setting) 1. Turn on the recorder's power. 2. Pr...

[Page 6] Fostex 8360

You must set the IP address for the recorder. IP address setting 1. Use the JOG dial to bring up "IP Addr.?" and press the [EXECUTE/YES] key. The display shows the screen for entering the IP address. By default, it is set to "0. 0. 0. ...

[Page 7] Fostex 8360

7 This setting selects whether the 8360 checks the user name and password or not when logging in. If it is set to "ON", the 8360 does not check the user name and password, so you can access (log in) to the recorder with any user name and pa...

[Page 8] Fostex 8360

3. After entering the login name, press the [EXECUTE/YES] key. The display now shows the screen for entering a password, where the leftmost digit flashes initially. 4. Enter a password in the same manner as entering a password. You can enter up to ei...

[Page 9] Fostex 8360

After completing the "TCP/IP Setup?" setting for the recorder, set the TCP/IP and connection settings for the personal computer. Personal computer setting • IP address: [192. 168. 0. ***] *** is any of numbers between 1 and 254. <Not...

[Page 10] Fostex 8360

After making all necessary settings described ear- lier, make the following setting for the FTP applica- tion you use before opening the connection to trans- fer files. Transferring files [If you use WS-FTP] From "ASCII", "Binary"...

[Page 11] Fostex 8360

1. Log in to the D2424/D2424LV from the personal computer via the network. 2. Select the program folder to which you are going to put the file. If you want to put the file to a new program, create a new folder. Specify only a program name as the fold...

[Page 12] Fostex 8360

<PORTUGAL> NAME: Caius - Tecnologias Audio e Musica, Lda. ADD: Rua de Santa Catarina, 131 4000 Porto, Portugal TEL: (+351) 2-2086009/2001394, FAX: (+351) 2-2054760/2087488 <SPAIN> NAME: Multitracker, S. A. ADD: C/Garcilaso No.9, Madrid 28...