Fujitsu PRIMERGY econel 20 Operating Manual

Download or browse on-line these Operating Manual for Fujitsu PRIMERGY econel 20 Server.

Fujitsu PRIMERGY econel 20 Manual Information:

This manual for Fujitsu PRIMERGY econel 20, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 62 pages, and the size of the file at download is 2.37 Mb. The document type is Operating Manual.

Download Manual

Summary of Contents:

[Page 1] Fujitsu PRIMERGY econel 20

PRIMERGY .com Operating Manual PRIMERGY econel 20 English ...

[Page 2] Fujitsu PRIMERGY econel 20

Are there ... ... any technical problems or other questions which you would like to be clarified? Please contact: · your sales partner · your sales outlet Further information can be found in the "Safety, Warranty and Ergonomics"...

[Page 3] Fujitsu PRIMERGY econel 20

...

[Page 4] Fujitsu PRIMERGY econel 20

Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-K831-Z101-1-7619 AG 02/02 A26361-K831-Z101-1-7619 PRIMERGY econel 20 OPERATING MANUAL ...

[Page 5] Fujitsu PRIMERGY econel 20

PRIMERGY econel 20 Operating Manual Introduction Important notes Preparing for Use Operation Troubleshooting and tips System expansions Technical data Index January 20...

[Page 6] Fujitsu PRIMERGY econel 20

Microsoft, MS, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation. VESA and DPMS are trademarks of Video Electronics Standards Association. PS/2 is a registered trademark of International Business Machines,...

[Page 7] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 Contents Introduction .....................................................................................................................................1 Notational conventions ............................................

[Page 8] Fujitsu PRIMERGY econel 20

Contents A26361-K831-Z101-1-7619 System expansions....................................................................................................................... 35 Information about boards .......................................................

[Page 9] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 1 Introduction This operating manual tells you how to put your server into operation and how to operate it in daily use. The Operating Manual applies for all configuration levels. Depending on the configuration level chos...

[Page 10] Fujitsu PRIMERGY econel 20

...

[Page 11] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 3 Important notes In this chapter you will find information regarding safety which is essential to take note of when working with your server. The manufacturer's notes contain helpful information on your server. Saf...

[Page 12] Fujitsu PRIMERGY econel 20

Important notes Manufacturer’s notes 4 A26361-K831-Z101-1-7619 Energy saving under Windows 2000 The Screen Saver tab allows you to set energy-saving functions for your screen. Select the following item in the menu: Start - Settings - Control Pane...

[Page 13] Fujitsu PRIMERGY econel 20

Manufacturer’s notes Important notes A26361-K831-Z101-1-7619 5 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appea...

[Page 14] Fujitsu PRIMERGY econel 20

Important notes Transporting the server 6 A26361-K831-Z101-1-7619 Transporting the server ! Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site. Do not unpack them un...

[Page 15] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 7 Preparing for Use ! Please take note of the safety information in the "Important notes" chapter. Unpacking and Checking the Delivery It is recommended not to throw away the original packaging material! It may b...

[Page 16] Fujitsu PRIMERGY econel 20

Preparing for Use Setting up the server 8 A26361-K831-Z101-1-7619 Setting up the server ! When installing your server, give consideration to the recommendations and safety notes in the "Safety, Warranty and Ergonomics" booklet. Set up the s...

[Page 17] Fujitsu PRIMERGY econel 20

Connect the monitor, mouse and keyboard Preparing for Use A26361-K831-Z101-1-7619 9 Connecting the mouse Depending on the equipment level selected, your server will be supplied with a PS/2 mouse or a USB mouse. Connecting a PS/2 mouse Ê Connect th...

[Page 18] Fujitsu PRIMERGY econel 20

Preparing for Use Connecting the server to the mains voltage 10 A26361-K831-Z101-1-7619 Connecting the server to the mains voltage 100 V - 127 V 200 V - 240 V 100 V - 127 V 200 V - 240 V a a a = Notch for inserting the screwdriver If the power suppl...

[Page 19] Fujitsu PRIMERGY econel 20

Connecting the server to the mains voltage Preparing for Use A26361-K831-Z101-1-7619 11 2 1 Ê Plug the system unit's power cable into the system unit (1) and then into the grounded mains outlet (2). ...

[Page 20] Fujitsu PRIMERGY econel 20

Preparing for Use Initial switch-on: Software will be installed 12 A26361-K831-Z101-1-7619 Initial switch-on: Software will be installed If the server is connected to a network, the network protocol is required as well as the user and server details....

[Page 21] Fujitsu PRIMERGY econel 20

Initial switch-on: Software will be installed Preparing for Use A26361-K831-Z101-1-7619 13 Switching on server with devices with main power switch 0 I 1 3 2 1 = Main power switch 2 = Power button 3 = Power-on indicator 0 = server is switched o...

[Page 22] Fujitsu PRIMERGY econel 20

Preparing for Use Initial switch-on: Software will be installed 14 A26361-K831-Z101-1-7619 Switching on server with devices without main power switch 1 2 1 = Power button 2 = Power-on indicator Ê If the power-on indicator lights orange or flashes...

[Page 23] Fujitsu PRIMERGY econel 20

Connecting external devices Preparing for Use A26361-K831-Z101-1-7619 15 Connecting external devices ! Do not connect or disconnect cables during a thunderstorm. Always take hold of the actual plug. Never unplug a cable by pulling the cable itself. ...

[Page 24] Fujitsu PRIMERGY econel 20

Preparing for Use Connecting external devices 16 A26361-K831-Z101-1-7619 Connections on the system unit The ports for external devices are on the rear and on the front of the system unit. The ports available on your server depend on the configuration...

[Page 25] Fujitsu PRIMERGY econel 20

Connecting external devices Preparing for Use A26361-K831-Z101-1-7619 17 Connecting external devices to the serial port External devices can be connected to the serial port (e.g. a modem). Ê Connect the data cable to the external device. Ê Conne...

[Page 26] Fujitsu PRIMERGY econel 20

...

[Page 27] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 19 Operation Switching on the server Ê Switch the monitor on (see the operating manual for the monitor). On devices with main power switch Ê Switch the server on with the main power switch on the back panel. Ê If the...

[Page 28] Fujitsu PRIMERGY econel 20

Operation Switching off the server 20 A26361-K831-Z101-1-7619 Switching off the server On devices with main power switch Ê Shut down the operating system properly. For Windows: select Shut Down from the Start menu. Ê If the operating system does ...

[Page 29] Fujitsu PRIMERGY econel 20

Indicators on the system unit Operation A26361-K831-Z101-1-7619 21 Indicators on the system unit 4 3 5 1 2 1 = Floppy disk indicator 2 = CD-ROM indicator 3 = Hard disk indicator 4 = Power-on indicator 5 = Power button 1 - Floppy disk indi...

[Page 30] Fujitsu PRIMERGY econel 20

Operation Keyboard 22 A26361-K831-Z101-1-7619 ! In an energy-saving mode the server must not be switched off with the main power switch (if present) or disconnected from the mains, as this may result in data loss. 5 - ON/OFF switch Switches the serve...

[Page 31] Fujitsu PRIMERGY econel 20

Keyboard Operation A26361-K831-Z101-1-7619 23 Start key calls up the Windows Start menu. Menu key invokes the menu for the marked item. Shift key enables upper-case letters and the upper key symbols to be used. Alt Gr Alt Gr (e.g. German keyboard...

[Page 32] Fujitsu PRIMERGY econel 20

Operation Working with floppy disks 24 A26361-K831-Z101-1-7619 Working with floppy disks i Follow the instructions supplied by the vendor of the floppy disks. Never clean the floppy disk drives with cleaning disks. Any attempt would destroy the read/...

[Page 33] Fujitsu PRIMERGY econel 20

Property and data protection Operation A26361-K831-Z101-1-7619 25 Property and data protection Software functions and mechanical locking offer a broad range of functions for protecting your server and your personal data from unauthorised access. Yo...

[Page 34] Fujitsu PRIMERGY econel 20

Operation Property and data protection 26 A26361-K831-Z101-1-7619 BIOS Setup security functions The Security menu in BIOS Setup offers you various options for protecting your personal data against unauthorised access, e.g.: · Preventing unauthorise...

[Page 35] Fujitsu PRIMERGY econel 20

Property and data protection Operation A26361-K831-Z101-1-7619 27 server Lock permissions You can initialise a SmartCard with one of the following permissions: System The system starts following entry of the user PIN. You can change the user PIN. S...

[Page 36] Fujitsu PRIMERGY econel 20

...

[Page 37] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 29 Troubleshooting and tips ! Take careful note of the safety warnings in the "Safety, Warranty and Ergonomics" booklet and in the "Preparing for Use" chapter, when you connect or disconnect cables. If ...

[Page 38] Fujitsu PRIMERGY econel 20

Troubleshooting and tipsPower-on indicator remains unlit after you have switched on your device 30 A26361-K831-Z101-1-7619 The screen stays blank If your screen remains blank this may be due to the following: Monitor is switched off Ê Switch your m...

[Page 39] Fujitsu PRIMERGY econel 20

No mouse pointer displayed on the screen Troubleshooting and tips A26361-K831-Z101-1-7619 31 The Windows 2000 Advanced Options Menu appears. Ê Select Safe Mode or Safe Mode with Network. Ê Set the correct values for the attached monitor as des...

[Page 40] Fujitsu PRIMERGY econel 20

Troubleshooting and tips Time and/or date is not correct 32 A26361-K831-Z101-1-7619 Time and/or date is not correct You can set the time and date in the BIOS Setup or in the operating system. Ê Set the time and date. i If the time and date are repe...

[Page 41] Fujitsu PRIMERGY econel 20

Tips Troubleshooting and tips A26361-K831-Z101-1-7619 33 BIOS settings in Power Management are not activated (Windows 9x with APM function) The Auto insert notification setting may be active for the CD-ROM drive. This setting causes Windows 9x to i...

[Page 42] Fujitsu PRIMERGY econel 20

...

[Page 43] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 35 System expansions i It may be necessary to update the BIOS when carrying out a system expansion or hardware upgrade. In this case, please contact our customer service centre. When installing components with a high power ...

[Page 44] Fujitsu PRIMERGY econel 20

System expansions Opening the system unit 36 A26361-K831-Z101-1-7619 Opening the system unit Ê Switch the server off. The server must not be in the Suspend mode! ! Please take note of the safety information in the "Important notes" cha...

[Page 45] Fujitsu PRIMERGY econel 20

Assembling the system unit System expansions A26361-K831-Z101-1-7619 37 Assembling the system unit a 3 3 3 2 1 b Ê Place the top cover on the system unit in the direction of the arrow (1) so that the distance (a) is approx. 10 mm. Ê Push the to...

[Page 46] Fujitsu PRIMERGY econel 20

System expansions Installing and removing a board 38 A26361-K831-Z101-1-7619 Installing a board Ê Open the system unit (see "Opening the system unit"). 1 2 3 4 Ê Remove the screw (1). Ê Remove the rear slot cover plate from the slot (...

[Page 47] Fujitsu PRIMERGY econel 20

Installing and removing a board System expansions A26361-K831-Z101-1-7619 39 Removing a board Ê Open the system unit (see "Opening the system unit"). Ê Disconnect the cables connected to the board. 1 2 3 4 Ê Remove the screw (1). Ê ...

[Page 48] Fujitsu PRIMERGY econel 20

System expansions Installing and removing drives 40 A26361-K831-Z101-1-7619 Installing and removing drives The system unit houses a total of three accessible drives (two 5 1/4-inch drives and one 3 1/2-inch drive) and one non-accessible half-height...

[Page 49] Fujitsu PRIMERGY econel 20

Installing and removing drives System expansions A26361-K831-Z101-1-7619 41 3 1 2 2 Ê Slide the drive into the system unit (1). Ê Fasten the drive into place with the screws (2). Ê Plug the connectors of the data cable and the power supply cab...

[Page 50] Fujitsu PRIMERGY econel 20

System expansions Installing and removing drives 42 A26361-K831-Z101-1-7619 Removing an accessible drive Ê Open the system unit (see "Opening the system unit"). 1 3 2 2 Ê Pull the data and the power supply connectors from the desired d...

[Page 51] Fujitsu PRIMERGY econel 20

Installing and removing drives System expansions A26361-K831-Z101-1-7619 43 Changing the floppy disk drive Ê Open the system unit (see "Opening the system unit"). 1 Ê Remove the screws (1) on the right side of the floppy disk drive. 2...

[Page 52] Fujitsu PRIMERGY econel 20

System expansions Installing and removing drives 44 A26361-K831-Z101-1-7619 3 2 1 Ê Take the new floppy disk drive out of its packaging and slide it into the system unit (1). Ê Plug the connectors of the data cable and the power supply cable into...

[Page 53] Fujitsu PRIMERGY econel 20

Installing and removing drives System expansions A26361-K831-Z101-1-7619 45 Replacing a hard disk drive Ê Open the system unit (see "Opening the system unit"). Removing the hard disk carrier 3 1 2 4 Ê Remove the screw (1) and push th...

[Page 54] Fujitsu PRIMERGY econel 20

System expansions Installing and removing drives 46 A26361-K831-Z101-1-7619 Replacing a hard disk drive 1 1 Ê Remove the screws of the hard disk drive you want to replace. Ê Take the new hard disk drive out of its packaging. Ê Make the require...

[Page 55] Fujitsu PRIMERGY econel 20

Extensions to the system board System expansions A26361-K831-Z101-1-7619 47 Ê Close the system unit (see "Assembling the system unit"). i It may be necessary to modify the entry for the drive in the BIOS Setup. Extensions to the sy...

[Page 56] Fujitsu PRIMERGY econel 20

System expansions Extensions to the system board 48 A26361-K831-Z101-1-7619 Replacing processor To replace the processor you must remove the system board bracket. 1 2 3 1 Ê Open the system unit (see "Opening the system unit"). Ê Remove...

[Page 57] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 49 Technical data Electrical data Regulations complied with: EN 60950 / VDE 0805, UL 1950 CSA 22.2 No.950 Protection class: I Rated voltage range: (selectable) 100 V - 127 V / 200 V - 240 V Frequency: 50 Hz -...

[Page 58] Fujitsu PRIMERGY econel 20

Technical data 50 A26361-K831-Z101-1-7619 Environmental conditions Environment class 3K2 Environment class 2K2 DIN IEC 721 part 3-3 DIN IEC 721 part 3-2 Temperature: · Operating (3K2) · Transport (2K2)) 15 °C .... 35 °C -25 °C .... 60 °C ...

[Page 59] Fujitsu PRIMERGY econel 20

A26361-K831-Z101-1-7619 51 Index A Accessible drive installing 40 removing 42 Alphanumeric keypad 22 Alt Gr key 23 Anti-theft protection 25 Audio input 16 Audio output 16 B Battery 47, 48 disposal 4 BIOS Setup 24 security funct...

[Page 60] Fujitsu PRIMERGY econel 20

Index 52 A26361-K831-Z101-1-7619 Floppy disk cannot read 31 cannot write 31 write-protection 24 Floppy disk drive changing 43 indicator 21 removing 42 Function keys 22 G Game port 16 Guarantee coupon booklet 7 H Hard disk contents, ...

[Page 61] Fujitsu PRIMERGY econel 20

Index A26361-K831-Z101-1-7619 53 Property protection 25 PS/2 mouse port 8, 9, 16 PS/2 mouse, connecting 9 R Rated voltage Devices with main power switch 10 Devices without main power switch 10 Recycling 4 Retransportation 6 Return key ...

[Page 62] Fujitsu PRIMERGY econel 20

Information on this document On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu- ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So- lutions. This document from the document archive refers to a product...