Furuno SC-110 Manual

[Page 1] Furuno SC-110

T HD S A TELLITE C O M P A SS S C - 110 ...

[Page 2] Furuno SC-110

Your Local Agent/DealerYour Local Agent/Dealer 9-52 Ashihara-cho,9-52 Ashihara-cho, Nishinomi y a, Ja p anNishinomi y a, Ja p an Tele p hone :Tele p hone : 0798-65-21110798-65-2111 faxfax 0798-65-42000798-65-4200 :: F IRST EDITION : F...

[Page 3] Furuno SC-110

i SAFETY INSTRUCTIONS WARNING Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use can cause fat...

[Page 4] Furuno SC-110

ii TABLE OF CONTENTS TABLE OF CONTENTS ..................................................................................................ii FOREWORD .................................................................................................

[Page 5] Furuno SC-110

iii 2.9.4 Time format............................................................................................................ 2-15 2.9.5 Demonstration mode.........................................................................................

[Page 6] Furuno SC-110

i v FOREWORD A Word to the Owner of the SC-110 FURUNO Electric Company thanks you for purchasing the FURUNO SC-110 THD Satellite Compass. (Hereafter, for sake of brevity, we refer to SC-110 as Satellite Compass.) We are confident you will...

[Page 7] Furuno SC-110

v SYSTEM CONFIGURATION The SC-110 consists of an antenna, a display unit and a processor unit. The tri-antenna system helps reduce the influence of ship's motion (rolling). : Option 12-24 VDC External heading data 6 ports for Heading or Navi...

[Page 8] Furuno SC-110

vi EQUIPMENT LIST Standard supply Name Type Code No. Qty Remarks GPS Antenna SC-1203F  1 Radome type Display Unit SC-502  1 Processor Unit SC-1101  1 CP20-02230* 004-378-110 TPPX cable CP20-02260* 004-379-660 1 TNC c...

[Page 9] Furuno SC-110

SP - 1 E7257-S01-B SPECIFICATIONS OF THD SATELLITE COMPASS SC-110 1 GENERAL 1.1 Heading Accuracy ±0.6° (95%) 1.2 Heading Resolution 0.1° 1.3 Follow-up 45°/s rate-of-turn 1.4 Settling Time 4 minutes 1.5 Position Accuracy 10...

[Page 10] Furuno SC-110

SP - 2 E7257S01B 4.3 Waterproofing Antenna Unit IPX6 Display Unit IPX5 Processor Unit IPX0 4.4 Vibration IEC 60945 5 COATING COLOR 5.1 Display/Processor Unit Panel: N3.0 Newtone No.5 (dark gray) Chassis: 2.5GY5/1.5 (light gray)...

[Page 11] Furuno SC-110

1-1 1 INSTALLATION 1.1 Mounting Considerations 1.1.1 Antenna unit General • Keep the length of the antenna cable in mind when selecting a mounting location. Installing the antenna above superstructures • The antenna must be mounted a...

[Page 12] Furuno SC-110

1. INSTALLATION 1-2 • The horizontal separation between the antenna and masts must be as follows: Mast diameter Separation distance (minimum) 10 cm 1.5 m 30 cm 3 m +80 -80 Less than 10 SC-series Antenna Mast, etc. Separation degrees...

[Page 13] Furuno SC-110

1. INSTALLATION 1-3 Radar Antenna SC-series Antenna Bridge Reception blocked by mast. Location influenced by reflected wave. Example of antenna installed below superstructures 1.1.2 Display unit, processor unit • Choose a location where...

[Page 14] Furuno SC-110

1. INSTALLATION 1-4 1.2 Installing the Antenna Unit Note: “Bird-repellent fixtures” may be attached to each antenna element and the center cover to prevent birds from alighting on them. If it is more convenient to attach them before fixi...

[Page 15] Furuno SC-110

1. INSTALLATION 1-5 2. Fix the antenna unit to the post as shown below. 3 2 1 Set the antenna unit to the flange. Fix the #1 and #2 antennas on the fore-and-aft line of the ship, with the #2 antenna forward of the #1 antenna. Flat washer Spring w...

[Page 16] Furuno SC-110

1. INSTALLATION 1-6 3. Coat each nut, bolt and washer with silicone rubber for waterproofing. Coat bolt, nut and washer completely with silicone rubber. Coating bolt, nut and washer with silicone rubber 4. As shown below, make a loop in th...

[Page 17] Furuno SC-110

1. INSTALLATION 1-7 1.3 Installing the Processor Unit The processor unit should be mounted aligned with the ship’s fore-and-aft line. It can be mounted on the deck, bulkhead, or on the underside of a desk. Choose a mounting location which all...

[Page 18] Furuno SC-110

1. INSTALLATION 1-8 1.3.2 Deck mount Orient the processor unit as shown below and fix it to the mounting location with four tapping screws (M5x20). You will set the orientation later on the menu. Bow Stern Stern Stern Stern Port Starboard Mou...

[Page 19] Furuno SC-110

1. INSTALLATION 1-9 1.3.3 Installation on the underside of a desk The processor unit may be mounted on the underside of a desk as shown in the figure below. Do not install it on the overhead. Name Plate Desk Installation of processor unit on ...

[Page 20] Furuno SC-110

1. INSTALLATION 1-10 1.4 Installing the Display Unit 1.4.1 Desktop, overhead mounting 1. Fasten the hanger to the mounting location with four tapping screws (supplied). See the outline drawing for mounting dimensions. 2. Screw the knobs ...

[Page 21] Furuno SC-110

1. INSTALLATION 1-11 Flush mount “S” Flush mount “S” kit Type: OP20-17, Code No.: 000-040-720) Name Type Code No. Qty Flush Mount Fixture 20-007-2401 100-183-190 2 Wing Bolt M4X30 000-804-799 4 Wing Nut M4 000-863-306 4 Hex ...

[Page 22] Furuno SC-110

1. INSTALLATION 1-12 1.5 Wiring This section covers general wiring. For further details see the interconnection diagram at the back of this manual. DISPLAY UNIT SC-502 PROCESSOR UNIT SC-1101 * 12-24 VDC ANTENNA UNIT SC-1203F MJ-A7SP...

[Page 23] Furuno SC-110

1. INSTALLATION 1-13 Note 1: Use cable type DPYC-1.5 (or equivalent) for the power cable. Conductor S = 1.5 mm φ = 1.56 mm 2 DPYC-1.5 Armor Sheath φ = 11.7 mm Sectional view of coaxial cable DPYC-1.5 Note 2: The optional antenna cable set (C...

[Page 24] Furuno SC-110

1. INSTALLATION 1-14 How to attach connector N-P-8DFB Outer Sheath 50 30 1 5 10 Armor Inner Sheath Shield Cover with heat-shrink tubing and heat. Cut off insulator and core by 10 mm. Twist shield end. Slip on clamp nut, gasket and clamp as s...

[Page 25] Furuno SC-110

1. INSTALLATION 1-15 1.6 Initial Settings Follow the procedures in this section to enter initial settings. NOTICE Improper menu settings may stop output of data and display the message "RATE ERROR." Be sure to enter correct data. 1....

[Page 26] Furuno SC-110

1. INSTALLATION 1-16 1.6.2 Choosing mounting method 1. Turn on the processor unit and then press the [MENU] key to show the menu. MAIN MENU SATELLITE WAAS/DGPS I/O SETUP INST MENU ERASE TRIP MENU ALARMS MESSAGES GPS SETUP SYS SETUP SOFT VER....

[Page 27] Furuno SC-110

1. INSTALLATION 1-17 1.7 Connection of External Equipment 1.7.1 General wiring All external equipment are terminated on the MAIN Board inside the processor unit. Turn off the power and unfasten four screws to remove the cover. Connect wiring f...

[Page 28] Furuno SC-110

1. INSTALLATION 1-18 1.7.2 Fabrication of cables Cable Sectional view, fabrication Power cable DPCY-1.5 (or equivalent) Conductor S = 1.5 mm φ = 1.56 mm 2 Armor Sheath φ = 11.7 mm SECTIONAL VIEW 50 6 Armor Cut the sheath. Vinyl tape S...

[Page 29] Furuno SC-110

2-1 2 OPERATION 2.1 Controls Omnipad: Selects menu items; shifts cursor. MENU key: Opens/closes menu. ENT key: Terminates keyboard input. DISP key: Selects display. DIM key: Adjusts panel illumination, display contrast. HDG SETU...

[Page 30] Furuno SC-110

2. OPERATION 2-2 2.2 Turning the Power On/Off Use the power switch on the processor unit to turn the power to the display unit on and off. POWER Switch Processor unit A beep sounds and the display starts up with the last-used display. ...

[Page 31] Furuno SC-110

2. OPERATION 2-3 2.4 Choosing a Display Use the [DISP] key to show a display desired. 2.4.1 Description of displays Heading display The heading display shows heading, course, speed, date, time and position-fixing status. The heading statu...

[Page 32] Furuno SC-110

2. OPERATION 2-4 Steering display The steering display shows heading in digital and analog form. SOG and COG are also indicated. Note that COG accuracy is low when the own ship speed is low. The faster the speed, the more accurate the COG. 3...

[Page 33] Furuno SC-110

2. OPERATION 2-5 Speed display Depending on the setting of DISTANCE DISP on the TRIP menu, the Set and Drift display or the Distance Run display is shown. The current indication requires a Doppler Speed Log. 3D . 2 SOG DISTANCE 54768 . kt STW...

[Page 34] Furuno SC-110

2. OPERATION 2-6 2.5 Alarm Setup The SC-110 can alert you with audible and visual alarms when GPS signal, DPGS signal and WAAS signal are lost. To set the DGPS alarm, do the following: 1. Press the [MENU] key to show the menu. 2. Choose...

[Page 35] Furuno SC-110

2. OPERATION 2-7 2.6 Confirming Satellite Status You can check the receiving condition of each antenna unit as follows: 1. Press the [MENU] key to open the menu. 2. Choose SATELLITE and then press the [ENT] key. GPS1 N DOP 1. 5 3D DOP 06...

[Page 36] Furuno SC-110

2. OPERATION 2-8 2.7 GPS Setup The GPS SETUP menu smoothes position and course, averages speed, applies position offset, and deactivates unhealthy satellites. 2.7.1 Displaying the GPS setup menu 1. Press the [MENU] key to open the menu. ...

[Page 37] Furuno SC-110

2. OPERATION 2-9 DISABLE SV (Disable satellite) Every GPS satellite is broadcasting abnormal satellite number(s) in its Almanac, which contains general orbital data about all GPS satellites. Using this information, the GPS receiver automatical...

[Page 38] Furuno SC-110

2. OPERATION 2-10 5. Choose SENTENCE and then press the [ENT] key. DATA OUT1 HDT VTG VHW HDM GGA VBW ROT GNS HVE ATT GLL ZDA VDR DATA OUT1 menu, sentences 6. Use the Omnipad to choose a sentence and then press the [ENT] key. HDT: True ...

[Page 39] Furuno SC-110

2. OPERATION 2-11 11. Use the Omnipad to choose the baud rate of the equipment connected and then press the [ENT] key. 12. INTERVAL is selected; press the [ENT] key. 25ms 100ms 200ms 1S 2S Tx interval options 13. Use the Omnipad to choose...

[Page 40] Furuno SC-110

2. OPERATION 2-12 Output sentence limitation The number of sentences which can be output depends on baud rate and output interval settings. The maximum number of characters per each data sentences are shown in the table below and the total nu...

[Page 41] Furuno SC-110

2. OPERATION 2-13 2.8.2 Log pulse This equipment provides SOG (speed over ground) in high accuracy. It converts an SOG value to a pulse signal and outputs at the rate of 200 or 400 pulses/nm. 1. Press the [MENU] key. 2. Choose I/O SETUP a...

[Page 42] Furuno SC-110

2. OPERATION 2-14 2.9 System Setup 2.9.1 Geodetic data Your unit is preprogrammed to recognize most of the major chart systems of the world. Although the WGS-84 system (default setting) is the GPS standard, other categories of charts in othe...

[Page 43] Furuno SC-110

2. OPERATION 2-15 2.9.2 Units of measurement Distance/speed can be displayed in nautical miles/knots, kilometers/kilometers per hour, or miles/miles per hour. 1. Press the [MENU] key to open the menu. 2. Choose SYS SETUP and then press th...

[Page 44] Furuno SC-110

2. OPERATION 2-16 2.9.5 Demonstration mode The demonstration mode provides simulated operation of the equipment. 1. Press the [MENU] key to open the menu. 2. Choose SYS SETUP and then press the [ENT] key. 3. Choose DEMO and then press t...

[Page 45] Furuno SC-110

2. OPERATION 2-17 2.10 WAAS/DGPS Setup 1. Press the [MENU] key to open the menu. 2. Choose WAAS/DGPS and then press the [ENT] key. WAAS/DGPS MODE : GPS WAAS SEARCH: AUTO 134 CORRECTIONS DATA SET: 00 DPGS STATION: AUTO RATE: ...

[Page 46] Furuno SC-110

2. OPERATION 2-18 2) Use the Omnipad to choose WAAS satellite search method, AUTO or MANUAL as appropriate. For MANUAL, press the [ENT] key, enter appropriate WAAS satellite referring to the illustration below and then press the [ENT] key. ...

[Page 47] Furuno SC-110

2. OPERATION 2-19 3) FREQ is selected; press the [ENT] key. 4) The cursor is selecting the hundredths digit so press ▲ or▼ to display appropriate digit. Press ► to shift the cursor to the tenths place. 5) Set other digits appropriatel...

[Page 48] Furuno SC-110

2. OPERATION 2-20 2.11 OTHERS Menu The OTHERS menu contains the following items: HOLD HDG DATA: Choose whether to display last-used heading data at power on or not. Because this data is not reliable, the heading indication flashes to alert ...

[Page 49] Furuno SC-110

2. OPERATION 2-21 2.12 TRIP Menu The TRIP menu functions to • Choose the indication to show on the SOG/STW display • Choose source of distance run • Reset distance run to zero • Smooth the tide drift indication • Enter smoo...

[Page 50] Furuno SC-110

2. OPERATION 2-22 2.13 Resetting Distance Run The distance run may be reset to zero as below when the source of distance run is GPS or VBW. 1. Press the [MENU] key to display the main menu. 2. Choose TRIP MENU and then press the [ENT] k...

[Page 51] Furuno SC-110

3-1 3 MAINTENANCE, TROUBLESHOOTING WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. 3.1 Preventive Maintenance Regular maintenance is important for good performance. A main...

[Page 52] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-2 3.2 Troubleshooting This section provides basic troubleshooting procedures which the user may follow to restore normal operation. Troubleshooting Symptom Cause Remedy Power connector on the processor un...

[Page 53] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-3 3.3 Diagnostics Diagnostic test1 The diagnostic test1 checks the equipment for proper operation. Note: Heading is not output during the diagnostic test, and this is communicated with an appropriate message...

[Page 54] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-4 AD-10 IEC OUT1 - - - - OUT2 - - - - OUT3 - - - - OUT4 - - - - OUT5 - - - - OUT6 - - SOFTWARE VERSION DISPLAY 205-1342-**.** PROCESS 205-1341-**.** GPS1 4850263*** GPS2 4850263*** GPS3 48502...

[Page 55] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-5 Diagnostic test2 If the heading indication changes randomly when ship is at anchor or does not change when the ship moves, run the test2 following the procedure below, with the ship at anchor and satellite s...

[Page 56] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-6 Diagnostic test3 This test checks the buzzer signal/contact for proper operation. 1. Press the [MENU] key to open the menu. 2. Choose SYS SETUP and then press the [ENT] key. 3. Choose TEST? and then p...

[Page 57] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-7 3.4 Program Number You may display the program number as follows: 1. Press the [MENU] key to open the menu. 2. Choose SOFT VER. and then press the [ENT] key. SOFTWARE VERSION DISPLAY 205-1342-**.** PRO...

[Page 58] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-8 3.6 Replacement of Battery The processor unit has a battery that stores data when the power is turned off. When the battery voltage is low, the message “BATTERY!” appears on the display. Have a qualifie...

[Page 59] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-9 3.7 Replacement of Fuse The 3 A fuse on the POWER Board inside the processor unit protects the equipment from overcurrent and reverse polarity of the power supply. If the fuse blows, have a qualified technic...

[Page 60] Furuno SC-110

3. MAINTENANCE, TROUBLESHOOTING 3-10 Error messages (con’t from previous page) Error Message Meaning Remedy BATTERY ALM! Voltage of battery in processor unit is low. Have battery replaced at earliest convenience. DATA ERR!* GPS data ...

[Page 61] Furuno SC-110

A P-1 APPENDIX 1. Menu Tree SATELLITE MESSAGES MENU ALARMS BUZZER (SHORT, LONG, CONSTANT) DGPS (OFF, ON) GPS SETUP SMOOTH POS (0 SEC) SMOOTH S/C (5 SEC) LAT OFFSET (0.000’N) LON OFFSET (0.000’E) DISABLE SV Default settings in bold italic...

[Page 62] Furuno SC-110

APPENDIX AP-2 2. Digital Interface Output sentences of channel 1 DATA OUT1-5: HDT, HDM, ROT, Patt, Phve, VTG, GGA, GLL, GNS, ZDA, VHW, VBW, VDR DATA OUT 6: AD-10 Transmission interval HDT, HDM, ROT, Patt, Phve: 100 ms VTG, GGA, GLL,...

[Page 63] Furuno SC-110

APPENDIX A P-3 Schematic diagrams Data IN Load requirements Isolation: Optocoupler Input Impedance: 440 ohm Max. voltage: ±15V Data Out 1-6 Output drive capability Max : 10mA ...

[Page 64] Furuno SC-110

APPENDIX AP-4 Data sentences PFECatt- True heading, pitching, rolling $PFEC,GPatt,xxx.x,+xx.x,-xx.x<CR><LF> (Ver. 1.5) $PFEC,GPatt,xxx.x,+xx.x,-xx.x*hh<CR><LF> (Ver. 2.0) Checksum (Ver. 2.0) Roll...

[Page 65] Furuno SC-110

APPENDIX A P-5 GNS - GNNS fix data $--GNS,hhmmss.ss,llll.lll,a,yyyyy.yyy,a,c--c,xx,x.x,x.x,x.x,x.x,x.x*hh<CR><LF> | | | | | | | | | | | | | ...

[Page 66] Furuno SC-110

APPENDIX AP-6 VBW - Dual ground/water speed $--VBW,x.x,x.x,A,x.x,x.x,A,x.x,A,x.x,A*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | +--- 11 ...

[Page 67] Furuno SC-110

APPENDIX A P-7 VLW - Distance travelled through the water The distance travelled, relative to the water. $--VLW,x.x,N,x.x,N*hh<CR><LF> | | | | | | | | | +--------- 3 ...

[Page 68] Furuno SC-110

APPENDIX AP-8 3. Input/Output Ports Port Label Terminal Name I/O Signal Remarks DATA OUT1 WAGO 231-304/026-000 O DATA OUT2 WAGO 231-304/026-000 O DATA OUT3 WAGO 231-304/026-000 O DATA OUT4 WAGO 231-304/026-000 O DATA O...

[Page 69] Furuno SC-110

APPENDIX A P-9 Port Label Terminal Name I/O Signal Remarks DATA OUT6 WAGO 231-304/026-000 O Heading AD-10 only AD-10 output interval: 25ms LOG Signal 200 pulse/nm or 400 pulse/nm (software), 0.5A max. LOG/ ALARM WAGO 231-3...

[Page 70] Furuno SC-110

APPENDIX AP-10 4. Parts List and Parts Location This equipment contains complex modules in which fault diagnosis and repair down to component level are not practical (IMO A.694(17)/8.3.1. Only some discrete components are used. FURUNO Electric...

[Page 71] Furuno SC-110

APPENDIX A P-11 F U R U N O Model SC-50/110 Unit SC-502 DISPLAY UNIT ELECTRICAL PARTS LIST Ref.Dwg. Page Blk.No. SYMBOL TYPE CODE No. REMARKS SHIPPABLE ASSEMBL Y PRINTED CIRCUIT BOARD 20P8189, CPU CPU Board (20P8189) Display Unit, cover...

[Page 72] Furuno SC-110

APPENDIX AP-12 5. Geodetic Chart Codes 001：WGS84 002：WGS72 003：TOKYO ：Mean Vallue (Japan, Korea, and Okinawa) 004：NORTH AMERICAN 1927 ：Mean Vallue (CONUS) 005：EUROPEAN 1950 ：Mean Vallue 006：AUSTRALIAN GEODETIC 1984 �...

[Page 73] Furuno SC-110

APPENDIX A P-13 6. Principle of Satellite Compass Own ship's heading can be determined by decoding the data in the carrier frequency in addition to ordinary GPS parameters. In principle, a pair of two antennas A1(ref) and A2(fore), each...

[Page 74] Furuno SC-110

APPENDIX AP-14 7. What is WAAS? WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. SBAS provides GPS signal corrections to SBAS users, for even better position accura...

[Page 75] Furuno SC-110

ＰＡＣＫＩＮＧ ＬＩＳＴ 20AY-X-9855 -2 SC-1203F N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT GPSｱﾝﾃﾅ GPS ANTENNA SC-1203F 000-041-926 1 工事材料 INSTALLATION MATERIALS CP20-02241 鳥よけ BIRD-...

[Page 76] Furuno SC-110

...

[Page 77] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 004-379-660 TYPE TYPETYPE TYPE CP20-02260 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 INSTALLATION MATERIALS 工事材料表 �...

[Page 78] Furuno SC-110

ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ 20AY-X-9851 -0 SC-502-J/E SC-502-J/ESC-502-J/E SC-502-J/E N A M E O U T L I N E DESCRIPTION/CODE №...

[Page 79] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 004-380-660 TYPE TYPETYPE TYPE CP20-02203 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 INSTALLATION MATERIALS 工事材料表 �...

[Page 80] Furuno SC-110

ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ 20AY-X-9853 -1 SC-1101-J/E SC-1101-J/ESC-1101-J/E SC-1101-J/E N A M E O U T L I N E DESCRIPTION/CODE...

[Page 81] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 004-380-560 TYPE TYPETYPE TYPE CP20-02601 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -1 INSTALLATION MATERIALS 工事材料表 �...

[Page 82] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 004-379-720 TYPE TYPETYPE TYPE SP20-01101 ITEM ITEM ITEM ITEM NO. NO.NO. NO. NAME OF NAME OF NAME OF NAME OF PART PARTPART PART OUTLINE OUTLINEOUTLINE OUTLINE DWG. NO. DWG. NO. DWG. NO. DWG. NO. OR OR ...

[Page 83] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 004-378-230 TYPE TYPETYPE TYPE OP20-31 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 INSTALLATION MATERIALS 工事材料表 �...

[Page 84] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 000-041-405 TYPE TYPETYPE TYPE OP20-29 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 20AY-X-9402 ﾌﾗｯｼｭﾏｳﾝﾄｷ...

[Page 85] Furuno SC-110

CODE NO. CODE NO.CODE NO. CODE NO. 000-040-720 TYPE TYPETYPE TYPE OP20-17 略  図 OUTLINE 名  称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 20AY-X-9403 ﾌﾗｯｼｭﾏｳﾝﾄｷ...

[Page 86] Furuno SC-110

...

[Page 87] Furuno SC-110

...

[Page 88] Furuno SC-110

...

[Page 89] Furuno SC-110

...

[Page 90] Furuno SC-110

...

[Page 91] Furuno SC-110

相互結線図 INTERCONNECTION DIAGRAM D C B A 654321 FURUNO ELECTRIC CO., LTD. kg DRAWN CHECKED APPROVED SCALE MASS DWG No. TITLE NAME 名称 サテライトコンパス GND 1 2 3 4 5 6 7 +15V SHIELD DISPLAY MJ-A7SPFD GND 1 2 3 4 5 6 7 +15V SHIELD ...

[Page 92] Furuno SC-110

IN-1 INDEX A Alarms menu.......................................... 2-6 B Battery replacement ............................... 3-8 C Compass display.................................... 2-4 Control description ................................

[Page 93] Furuno SC-110

...