Furuno Color LCD Sounder FCV-620/585 Operator's Manual

Download or browse on-line these Operator's Manual for Furuno Color LCD Sounder FCV-620/585 Radar Detector.

Furuno Color LCD Sounder FCV-620/585 Manual Information:

This manual for Furuno Color LCD Sounder FCV-620/585, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 56 pages, and the size of the file at download is 7.66 Mb. The document type is Operator's Manual.

Download Manual

Summary of Contents:

[Page 1] Furuno Color LCD Sounder FCV-620/585

...

[Page 2] Furuno Color LCD Sounder FCV-620/585

i IMPORTANT NOTICE • No part of this manual may be copied or reproduced without written permission. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications are subject ...

[Page 3] Furuno Color LCD Sounder FCV-620/585

ii SAFETY INSTRUCTIONS Safety Instructions for the Operator WARNING Do not open the equipment. There are no user-serviceable parts inside. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately t...

[Page 4] Furuno Color LCD Sounder FCV-620/585

SAFETY INSTRUCTIONS iii Safety Instructions for the Installer WARNING Turn off the power at the switchboard before beginning the installation. Fire or electrical shock can result if the power is left on. Be sure no water leaks in at the trans- ducer ...

[Page 5] Furuno Color LCD Sounder FCV-620/585

iv TABLE OF CONTENTS FOREWORD ............................... v SYSTEM CONFIGURATION ..... vi EQUIPMENT LISTS.................. vii 1. OPERATION ........................... 1 1.1 Control Description......................... 1 1.2 Power On/Off ..........

[Page 6] Furuno Color LCD Sounder FCV-620/585

v FOREWORD A Word to FCV-620/585 Owners Congratulations on your choice of the FURUNO FCV-620/585 Color LCD Sounder. We are confident you will see why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO El...

[Page 7] Furuno Color LCD Sounder FCV-620/585

vi SYSTEM CONFIGURATION FCV-620 FCV-585 DISPLAY UNIT CV-620 : Standard : Option Power supply 12-24 VDC : Local Supp ly Water temperature/speed sensor ST-02MSB, ST-02PSB Water temperature sensor T-02MSB, T-02MTB, T-03MSB GPS Navigator or Water tem...

[Page 8] Furuno Color LCD Sounder FCV-620/585

vii EQUIPMENT LISTS Standard supply for FCV-620 Standard supply for FCV-585 Name Type Code No. Qty Remarks Display Unit CV-620 - 1 With hard cover Transducer 520-5PSD 000-015-204 1 Thru-hull mount 520-5MSD 000-015-212 Thru-hull mount 525-5PWD 000-146...

[Page 9] Furuno Color LCD Sounder FCV-620/585

EQUIPMENT LISTS viii Optional equipment for FCV-620/585 Name Type Code No. Qty Remarks Accessories (FP02-05601) • Flush mounting sponge (1 pc., 02-155-1081-1, 100-330-851-10) • Wing nut (4 pcs., M4 SUS304, 000-863-331) • Flat washer (4 pcs., M4...

[Page 10] Furuno Color LCD Sounder FCV-620/585

1 1. OPERATION 1.1 Control Description Display unit for FCV-620 Note: The FCV-620 and FCV-585 share the same features. For sake of brevity, this manual uses “FCV-620”. How to remove the hard cover Place fingers below cover, pull cover forward a...

[Page 11] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 2 1.2 Power On/Off 1. Press the /BRILL key to turn on the power. The unit beeps, the startup screen appears, and then the equipment checks the ROM and RAM for proper operation. After the com- pletion of the equipment check, the last-...

[Page 12] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 3 2. Rotate the MODE knob again to choose the display mode desired. The screen you chose appears soon there- after. Single frequency display Low frequency (50 kHz) The sounder uses ultrasonic signals to detect bottom conditions. The lo...

[Page 13] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 4 Bottom zoom display This mode expands bottom and bottom fish on the left-half window. This mode is useful for determining bottom contour. When the bottom depth increases, the display automatically shifts to keep the bottom echo at ...

[Page 14] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 5 1.5 Choosing Range The basic range may be chosen in Auto or Manual mode. 1. Press the RANGE key to open the range set- ting window. Range setting window 2. Use W or X to choose Auto or Manual. Auto: The range changes automatically to ...

[Page 15] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 6 Manual gain adjustment The GAIN knob adjusts the sensitivity of the receiver. Generally, use a higher gain setting for greater depths and a lower setting for shallower waters. Examples of proper and improper gain 1. Press the GAIN k...

[Page 16] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 7 the menu window (left) is displayed to gray. You may also use X to move the cursor. 4. Use S or T to choose the menu item desired and press the ENTER key. The selected setting box or window appears. Setting box Sett...

[Page 17] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 8 Sounder menu 3. Use S or T to choose Pic. Advance and press the ENTER key. Pic. Advance setting window 4. Use S or T to choose picture advance speed desired and press the ENTER key. 1/16 is the slowest speed and 4/1 is the fastest s...

[Page 18] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 9 1.12 Suppressing Low Level Noise Low intensity "speckles" may appear over most of screen. This is mainly due to sediment in the water or noise. These can be suppressed by adjusting Clutter on the menu. Clutter appearance ...

[Page 19] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 10 1.14 A-Scope Display This display shows echoes at each transmission with amplitudes and tone proportional to their intensities, on the right of the screen. It is useful for estimating the kind of fish school and bottom composition...

[Page 20] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 11 Note: To hide the fish symbol, choose Off at step 4 and press the ENTER key. 5. Press the MENU/ESC key twice to close the window. Fish Info 1. Press the MENU/ESC key to open the menu. 2. Use S or T to choose Display and press the ...

[Page 21] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 12 tain distance from the bottom. Note that the bottom lock display must be turned on to use this alarm. Water temperature alarm: The water tempera- ture alarm alerts you when the water tempera- ture is within (inside alarm) the alarm ...

[Page 22] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 13 8. Use T to choose Span (or Radius for Arrival) and press the ENTER key. 9. Use S or T to set the range of depth, tem- perature, speed or distance as appropriate. To shorten the alarm range marker use T, and to lengthen use S. 10...

[Page 23] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 14 3. Press the MARK or ENTER key to register the position set at step 2. A red vertical line appears on the position set at step 2. The waypoint is named automati- cally with the next sequential waypoint number. If you want to change...

[Page 24] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 15 1.18.2 Editing a registered waypoint 1. Press the MENU/ESC key to open the menu. 2. Use S or T to choose Data and press the ENTER key. 3. Use S or T to choose WPT List and press the ENTER key. 4. Use S or T to choose a waypoint...

[Page 25] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 16 Graphic displays Digital displays Note: When data is lost 30 sec., the display shows “- -” at the location where data is lost. 1.19.2 Screen division 1. Press the MENU/ESC key to open the menu. 2. Use S or T to choose Display ...

[Page 26] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 17 Bottom Zone setting window 2. Use W or X to choose the border desired (Above or Below). 3. Use S or T to move upper or lower border and press the ENTER key. White Line: Displays the leading edge of the bottom echo in white. This i...

[Page 27] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 18 Display menu Display menu Depth Size: Choose the font size of the depth indication (Small, Medium or Large). Zoom Marker: Turn the zoom marker on or off (on the single frequency display) when the bottom lock display, the bottom ...

[Page 28] Furuno Color LCD Sounder FCV-620/585

1. OPERATION 19 Data menu This menu mainly sets up how to display data input by external equipment. Data menu Data Box 1, 2: Data for speed (SOG), speed (STW), depth, range, bearing, position, wind, heading, course, barom press, water tempera- tur...

[Page 29] Furuno Color LCD Sounder FCV-620/585

20 2. SYSTEM MENU 2.1 Displaying System Sub Menu The System menu mainly consists of items which once set do not require frequent adjust- ment. This menu has nine sub menus. To dis- play each sub menu, do the followings. 1. Press the MENU/ESC key t...

[Page 30] Furuno Color LCD Sounder FCV-620/585

2. SYSTEM MENU 21 Japanese. To change language, select lan- guage desired and press the ENTER key. 2.5 Units Menu Units menu Depth: Choose unit of depth measurement from m, ft, fa, pb or HR (Japanese). Temp: Choose unit of temperature measure- ment ...

[Page 31] Furuno Color LCD Sounder FCV-620/585

22 3. MAINTENANCE, TROUBLE- SHOOTING 3.1 Maintenance Regular maintenance is essential for good performance. Checking the items listed in the table below monthly will help keep your equip- ment in good shape for years to come. 3.2 Cleaning the Displ...

[Page 32] Furuno Color LCD Sounder FCV-620/585

3. MAINTENANCE, TROUBLESHOOTING 23 3.6 Troubleshooting The table below provides basic trouble- shooting procedures which the user may follow to restore normal operation. 3.7 Diagnostics If you feel your unit is not working properly, conduct the dia...

[Page 33] Furuno Color LCD Sounder FCV-620/585

3. MAINTENANCE, TROUBLESHOOTING 24 Checking GAIN knob: Rotate the knob. The indication goes higher with clockwise rotation; lower with counterclockwise rota- tion. Press the knob. The knob corre- sponding on-screen circle "lights" in red ...

[Page 34] Furuno Color LCD Sounder FCV-620/585

25 4. INSTALLATION 4.1 Display Unit Mounting considerations The display unit can be installed on a tabletop or flush mounted in a panel. When choosing a location keep the following in mind: • The temperature and humidity should be moderate and s...

[Page 35] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 26 4.2 Thru-hull Mount Transducer Transducer mounting location The thru-hull mount transducer (520-5PSD, 520-5MSD) provides the best performance of all, since the transducer protrudes from the hull and the effect of air bubbles an...

[Page 36] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 27 Typical thru-hull mount transducer installations Typical thru-hull mount transducer installations Procedure for installing the thru-hull mount transducer 1. With the boat hauled out of the water, mark the location chosen for mo...

[Page 37] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 28 4.3 Transom Mount Transducer The transom mount transducer is very com- monly employed, usually on relatively small I/ O or outboard boats. Do not use this method on an inboard motor boat because turbulence is created by the prop...

[Page 38] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 29 Remarks on installation • Turn off the engine and anchor the boat while installing the equipment. • Install the transducer in the engine room. • Except for installing the transducer to the bottom of hull, do not turn on its...

[Page 39] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 30 b)Gently dismount the transducer with a knife or a piece of wood. c)Reattach the transducer elsewhere as shown in "Attaching the transducer." d)Check the installation again. Final preparation Support the transducer with...

[Page 40] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 31 Note 3: For single drive boat, mount on the starboard side at least 75 mm (3") beyond the swing radius of the propeller. Mounting location on single drive boat Note 4: For twin drive boat, mount between the drives. Installa...

[Page 41] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 32 3. If the bracket has been temporarily fas- tened to the transom, remove it. Apply a marine sealant to the threads of the three #10 x 1-1/4" self tapping screws to prevent water seeping into the transom. Screw the bracket ...

[Page 42] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 33 8. Position the two cable clamps and fasten them in place. If used, push the cable cover over the cable and screw it in place. 9. Route the cable to the instrument being careful not to tear the cable jacket when passing it thou...

[Page 43] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 34 Thru-hull mount water temperature sensor T-02MSB, T-03MSB • Select a suitable mounting location consid- ering the following points: • Select a mid boat flat position. The sensor does not have to be installed perfectly per- pe...

[Page 44] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 35 How to fix fuse holders Establishing the ground The ground wire (1.25 sq or more, local supply) should be as short as possible. The signal line ground is isolated from the chassis ground, however the power line is not insu- late...

[Page 45] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 36 Matching box MB-1100 *: With 10P connector cable **: For connecting two transducers Fabricating the transducer cable Fabricate the transducer cable as below and connect it to the matching box. How to fabricate the transducer cable...

[Page 46] Furuno Color LCD Sounder FCV-620/585

4. INSTALLATION 37 4.10 Adjustments after Installation NMEA 1. Press the MENU/ESC key to open the menu. 2. Use S or T to choose NMEA under System menu and press the ENTER key. NMEA menu NMEA0183 Choose NMEA0183 version of nav equipment connected ...

[Page 47] Furuno Color LCD Sounder FCV-620/585

38 MENU TREE MENU key Sounder Pic. Advance (4/1, 2/1, 1/1 , 1/2, 1/4, 1/8, 1/16, Stop) Zoom Mode ( Bottom Lock , Bottom Zoom, Marker Zoom) Shift (0 - 2500 ft, 0 ft ) Bottom Zone Interference (Off, Low, Medium, High, Auto ) Color Erase (0 - 50 %, ...

[Page 48] Furuno Color LCD Sounder FCV-620/585

MENU TREE 39 Data Go to WPT ( Off , Destination 1 - 20) WPT List Data Box 1 ( Off , Speed (SOG), Speed (STW), Depth, Range, Bearing, Position, Wind, Heading, Course, Barom Press, Temp, Time to Go, Trip meter, ...

[Page 49] Furuno Color LCD Sounder FCV-620/585

FURUNO FCV-620/585 SP - 1 E2374S01D-M SPECIFICATIONS OF ECHO SOUNDER FCV-620/585 1. GENERAL 1.1 TX Frequency 50 kHz and 200 kHz 1.2 Transmit Method Single or dual frequency transmitting 1.3 Output Power FCV-620 600 W FCV-585...

[Page 50] Furuno Color LCD Sounder FCV-620/585

FURUNO FCV-620/585 SP - 2 E2374S01D-M 3. INTERFACE 3.1 Input Data Sentences IEC61162-1 (NMEA0183 Ver 1.5/2.0/3.0) Order of priority Latitude/Longitude: GGA>RMC>RMA>GLL Course (true): VTG>RMC>RMA Course (magneti...

[Page 51] Furuno Color LCD Sounder FCV-620/585

䎼䎑䎃䎫䏄䏗䏄䏌 䎼䎑䎃䎫䏄䏗䏄䏌 Ha tai 電子署名者 : Hatai DN: cn=Hatai, c=JP - 日本, o=Seigi, ou=Joho, [email protected] 日付 : 2006.03.02 11:23:20 +09'00' ...

[Page 52] Furuno Color LCD Sounder FCV-620/585

䎼䎑 䎫䏄䏗䏄䏌 Hatai 電子署名者 : Hatai DN: cn=Hatai, c=JP - 日本, o=Seigi, ou=Joho, [email protected] 日付 : 2006.03.09 17:17:27 +09'00' 䎼䎑䎃䎫䏄䏗䏄䏌 ...

[Page 53] Furuno Color LCD Sounder FCV-620/585

...

[Page 54] Furuno Color LCD Sounder FCV-620/585

2 43 A 1 B C TITLE NAME 名称 INTERCONNECTION DIAGRAM COLOR LCD SOUNDER 相互結線図 カラーLCD魚探 FCV-620/585 T.YAMASAKI T.TAKENO NOTE *3. CONNECTOR PLUG FITTED AT FACTORY. 注記 *1)造船所手配。 *2)オプション。 *�...

[Page 55] Furuno Color LCD Sounder FCV-620/585

...

[Page 56] Furuno Color LCD Sounder FCV-620/585

FURUNO ELECTRIC CO., LTD. 9-52 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, Japan Tel: +81 798-65-2111 Fax: +81 798-65-4200 Pub NO. DOC-852 EC Declaration of Conformity We FURUNO ELECTRIC CO., LTD. ...