Raymarine 530 Owner's Handbook Manual

Download or browse on-line these Owner's Handbook Manual for Raymarine 530 Fish Finder, GPS.

Raymarine 530 Manual Information:

This manual for Raymarine 530, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 170 pages, and the size of the file at download is 2.63 Mb. The document type is Owner's Handbook Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Raymarine 530. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Raymarine 530

SL520/530/631 PLUS Chartplotter Display Owner’s Handbook Document number: 81209_1 Date: September 2002 ...

[Page 2] Raymarine 530

...

[Page 3] Raymarine 530

iii SL520/530/631 PLUS Chartplotter Display Owner’s Handbook September 2002 INTENDED USE The display units detailed in this handbook may form part of navigational radar systems intended for light marine use. These displays and radar systems are on...

[Page 4] Raymarine 530

iv SL520/530/631 PLUS Chartplotter Displays Raymarine products are supported by a network of Authorized Service Representatives. For information on our products and services, contact either of the following: UNITED STATES Raymarine Inc. 22 Cotton Roa...

[Page 5] Raymarine 530

v Preface This handbook describes the following PLUS displays from Raymarine: Note: The display units include a cartridge holder assembly which contains two slots for C-MAP NT chart cards. This handbook contains very important information on the inst...

[Page 6] Raymarine 530

vi SL520/530/631 PLUS Chartplotter Displays EMC Conformance All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. The design and manufacture of Raymarine equipment and acce...

[Page 7] Raymarine 530

vii Contents Preface ............................................................................................ 1.v Warranty ....................................................................................... 1.v EMC Conformance ..................

[Page 8] Raymarine 530

viii SL520/530/631 PLUS Chartplotter Displays Make and Follow a Route ........................................................... 2.20 Review Your Passage Plan .......................................................... 2.22 Chapter 3: Standard Chart ...

[Page 9] Raymarine 530

ix Clearing the Current Track ......................................................... 3.39 Managing Tracks ........................................................................ 3.39 SmartRoute .......................................................

[Page 10] Raymarine 530

x SL520/530/631 PLUS Chartplotter Displays GPS SOG/COG Filter ................................................................. 5.10 Compass Set Up .......................................................................... 5.10 Language ................

[Page 11] Raymarine 530

xi 6.9 Integrated System Checks .......................................................... 6.24 Chart Display .............................................................................. 6.24 Received Data .............................................

[Page 12] Raymarine 530

xii SL520/530/631 PLUS Chartplotter Displays ...

[Page 13] Raymarine 530

Chapter 1: Overview 1-1 How to Use This Handbook How to Use This Handbook Chapter 1: Overview How to Use This Handbook This handbook describes the following displays: SL520 PLUS Chartplotter, 7" Mono Display SL530 PLUS Chartplotter, 7" Co...

[Page 14] Raymarine 530

1-2 SL520/530/631 PLUS Chartplotter Displays How to Use This Handbook How to Use This Handbook the system. Details to connect the display to other equipment are also provided. Chapter 7 provides information on user maintenance, and what to do if yo...

[Page 15] Raymarine 530

Chapter 1: Overview 1-3 General General 1.1 General The display unit is waterproof to CFR46 and can be installed either above or below deck. The unit includes: • 7" or 10.4" PLUS display • Trackpad • Eleven dedicated (labeled) control...

[Page 16] Raymarine 530

1-4 SL520/530/631 PLUS Chartplotter Displays Operating Modes Operating Modes Operating Modes You can view a full screen chart.You can also set Windows On to split the display into two half-screen windows to show supplementary data. The main operating...

[Page 17] Raymarine 530

Chapter 1: Overview 1-5 The Chartplotter Display The Chartplotter Display 1.2 The Chartplotter Display The SL520/530/631 PLUS display includes a Chartplotter. The chartplotter includes a small-scale world map and detailed navigation information is ...

[Page 18] Raymarine 530

1-6 SL520/530/631 PLUS Chartplotter Displays Chartplotter Display Options Chartplotter Display Options The Screen Presentation Options, described in Chapter 2 allow you to switch the Chart Grid On/Off and Custom Chart Details On/Off. Note: When you...

[Page 19] Raymarine 530

Chapter 1: Overview 1-7 Chartplotter Functions Chartplotter Functions Chartplotter Functions The Chartplotter includes the following functions: • Display C-MAP NT C-Card chart information including Ports and Tides (if available) • View chart in...

[Page 20] Raymarine 530

1-8 SL520/530/631 PLUS Chartplotter Displays Operating Controls Operating Controls 1.3 Operating Controls You operate the chart using a variety of controls: • A trackpad providing up, down, left, right and diagonal control of an on- screen cursor. ...

[Page 21] Raymarine 530

Chapter 1: Overview 1-9 Trackpad and Cursor Trackpad and Cursor The cursor is used to: • Select a position on the screen. • Select an item, e.g. chart object. • Pan the chart display. Moving the Cursor You can press on any of the four sections ...

[Page 22] Raymarine 530

1-10 SL520/530/631 PLUS Chartplotter Displays Dedicated Keys Dedicated Keys Dedicated Keys The dedicated keys: DISPLAY, MARKS, VRM/EBL, MULTI ALARMS, RANGE, ENTER, CLEAR, MENU and POWER have fixed functions; the functions are similar on all Pathfin...

[Page 23] Raymarine 530

Chapter 1: Overview 1-11 Pop-Up Menus Pop-Up Menus The currently selected soft key option is shown by its gray or green background. If the key text is displayed in gray rather than in black, it is not currently available. When you press a soft key on...

[Page 24] Raymarine 530

1-12 SL520/530/631 PLUS Chartplotter Displays Database Lists Database Lists Database Lists The waypoints, routes and tracks that you create on the chartplotter are stored in database lists. You can view these lists and select items for editing. Figur...

[Page 25] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-1 Introduction Chapter 2: Getting Started & Adjusting the Display 2.1 Introduction This chapter provides information and instructions to get you started using your display. It will help yo...

[Page 26] Raymarine 530

2-2 SL520/530/631 PLUS Chartplotter Displays Switching the Display On and Off 2.2 Switching the Display On and Off ➤ To switch the display on, press and hold the POWER key until the unit beeps. If the display was last used in chartplotter mode, th...

[Page 27] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-3 Simulator Mode ➤ To switch the display unit off, press and hold the POWER key for three seconds. A countdown timer is displayed as shown below: Figure 2-2: Switch Off When the counter reach...

[Page 28] Raymarine 530

2-4 SL520/530/631 PLUS Chartplotter Displays Changing the Lighting & Contrast - SL520 Mono Display Changing the Lighting & Contrast - SL520 Mono Display You can change the level of backlighting and contrast for the screen and keys. The key ...

[Page 29] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-5 Changing the Brightness - SL530/ 631 Color Display Changing the Brightness - SL530/631 Color Display The MULTI key on the color LCD display is used to adjust brightness. The brightness of th...

[Page 30] Raymarine 530

2-6 SL520/530/631 PLUS Chartplotter Displays Controlling the Display 2.3 Controlling the Display You control the display using the cursor and control keys. You start all operations from the default screen, that is the default soft keys are displayed...

[Page 31] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-7 Selecting the Mode of Operation Selecting a Half-Screen Window for Display Note: Windows can only be used with the Chart screen, they are not available on the data log screen. ➤ To select ...

[Page 32] Raymarine 530

2-8 SL520/530/631 PLUS Chartplotter Displays D5983-2 Soft Key Labels: Change when you press a key. Default soft key labels are shown. Chartplotter ROUTE GOTO SCREEN FIND SHIP Trackpad Controls cursor position and the slider values. Hold the trackpad...

[Page 33] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-9 Selecting the Mode of Operation Figure 2-3: Half-Screen Window Options CDI Window SELECT WINDOW WINDOWS OFF ON SELECT WINDOW WINDOWS OFF ON BDI Window Navdata Window SELECT WINDOW WINDOWS OF...

[Page 34] Raymarine 530

2-10 SL520/530/631 PLUS Chartplotter Displays Customizing the Screen Presentation Options Customizing the Screen Presentation Options The SCREEN soft key lets you switch the following screen presentation options on or off: Switching the Cursor Data...

[Page 35] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-11 Note: If you select BDI, CDI or Nav Data for display in a half-screen window, the data boxes are temporarily hidden. At any time, you can switch the group of data boxes on or off using the S...

[Page 36] Raymarine 530

2-12 SL520/530/631 PLUS Chartplotter Displays Chart Display Control Functions 2.4 Chart Display Control Functions Moving Around the Chart You will normally operate the chartplotter with the chart showing your vessel’s current location. The default...

[Page 37] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-13 Moving Around the Chart Figure 2-4: Changing the Chart Center Using FIND SHIP FIND SHIP is used in chart mode to re-draw the chart with the vessel at the center and the cursor homed onto th...

[Page 38] Raymarine 530

2-14 SL520/530/631 PLUS Chartplotter Displays Moving Around the Chart • To see either more detail (of a smaller area) or a larger area (in less detail) on the screen. • To move the display to another area of the chart, by zooming out to a small ...

[Page 39] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-15 Moving Around the Chart Figure 2-6: Chart Boundaries 4. When no further chart detail is available, as you press the bottom of the RANGE key, the effect depends on whether Plotter Mode is on...

[Page 40] Raymarine 530

2-16 SL520/530/631 PLUS Chartplotter Displays Typical Chart Scenarios 2.5 Typical Chart Scenarios The following illustrationsprovideoperating guidelinesfor typicalnavigation scenarios. These scenarios can be used as a training guide; they show you h...

[Page 41] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-17 Typical Chart Scenarios This page intentionally left blank. ...

[Page 42] Raymarine 530

2-18 SL520/530/631 PLUS Chartplotter Displays Place and Goto a Waypoint Place and Goto a Waypoint 1. Press MARKS 2. Position Cursor as required Press the soft key 1 2 3 Press the soft key to go to the waypoint selected by the cursor. D4267-1 ...

[Page 43] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-19 Place and Goto a Waypoint 4 The vessel navigates towards the target waypoint See: 5.3 Working wth Waypoints Go to an individual Target Point, page 5-26. D4267-2a ...

[Page 44] Raymarine 530

2-20 SL520/530/631 PLUS Chartplotter Displays Make and Follow a Route Make and Follow a Route # GOTO SCREENROUTE FIND SHIP MAKE ROUTE EDIT ROUTE CLEAR ROUTE MORE¬ 2 2. Press the soft key 1 3 4 Press the soft key D4268-1 Press the sof...

[Page 45] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-21 Make and Follow a Route GOTO WAYPOINT FOLLOW ROUTE GOTO CURSOR GOTO CURSOR RESTART XTE WAYPOINT ADVANCE STOP FOLLOW GOTO SCREENROUTE FIND SHIP 7 5 6 8 Press the soft key D4268-2a Press the ...

[Page 46] Raymarine 530

2-22 SL520/530/631 PLUS Chartplotter Displays Review Your Passage Plan Review Your Passage Plan GOTO SCREEN ROUTE FIND SHIP MAKE ROUTE EDIT ROUTE CLEAR ROUTE MORE¬ 2 3 2. Press the soft key 1 4 5 Press the soft key Press the soft key...

[Page 47] Raymarine 530

Chapter 2: Getting Started & Adjusting the Display 2-23 Review Your Passage Plan 6 Change the TIME to HOURS - the display indicates it will take 32 minutes to reach the destination. You can change the PLANNED SOG; the display updates to indi...

[Page 48] Raymarine 530

2-24 SL520/530/631 PLUS Chartplotter Displays Review Your Passage Plan ...

[Page 49] Raymarine 530

Chapter 3: Standard Chart Operations 3-1 Introduction Chapter 3: Standard Chart Operations 3.1 Introduction This chapter explains how to use the chart functions to navigate with your display. It covers the following topics: • Using chart cards. �...

[Page 50] Raymarine 530

3-2 SL520/530/631 PLUS Chartplotter Displays Using Chart Cards 3.2 Using Chart Cards The chartplotter has a built-in world map; most areas are displayed on a scale of 4000 nm from the top to the bottom of the screen, and can be zoomed in to 150 nm. T...

[Page 51] Raymarine 530

Chapter 3: Standard Chart Operations 3-3 Removing a Chart Card Figure 3-1: Removing the Chart Card Removing a Chart Card We recommend that before you remove a chart cartridge, you ensure the chart is not being used on any other display unit. Removin...

[Page 52] Raymarine 530

3-4 SL520/530/631 PLUS Chartplotter Displays Displaying Chart Object and Source Information ➤ To zoom in: 1. Use the trackpad to move the cursor inside one of the chart boxes, and press the lower part of the RANGE key. That area is expanded, with...

[Page 53] Raymarine 530

Chapter 3: Standard Chart Operations 3-5 Displaying Chart Object and Source Information Port Area At large chart scales port area information is indicated by the symbol . An object information pop-up provides the name of the marina or port and a li...

[Page 54] Raymarine 530

3-6 SL520/530/631 PLUS Chartplotter Displays Displaying Chart Object and Source Information Note: The predictions available are sufficiently accurate under moderate weather conditions, for the coastal areas served by the reference station, to be us...

[Page 55] Raymarine 530

Chapter 3: Standard Chart Operations 3-7 Displaying Chart Object and Source Information Nearest You can obtain information for the eight nearest waypoints, port services, ports, tide stations, wrecks or obstructions for a selected position. The cha...

[Page 56] Raymarine 530

3-8 SL520/530/631 PLUS Chartplotter Displays Working with Waypoints 3.3 Working with Waypoints Introduction The Chartplotter enables you to place up to 998 waypoints (in addition, waypoint number 999 is used for MOB operation): a waypoint is a posit...

[Page 57] Raymarine 530

Chapter 3: Standard Chart Operations 3-9 Placing a Waypoint Placing a Waypoint The scenario Place and Goto a Waypoint on page 2-18 provides a simple example of how to place a waypoint. ➤ To access the place waypoint soft keys, press MARKS: ➤ To ...

[Page 58] Raymarine 530

3-10 SL520/530/631 PLUS Chartplotter Displays Placing a Waypoint 3. You can use the soft keys to edit the waypoint position as described in Edit- ing the Waypoint Details on page 3-13. It is added to the Waypoint List and named with the next availabl...

[Page 59] Raymarine 530

Chapter 3: Standard Chart Operations 3-11 Placing a Waypoint 3. Edit the Loran parameters as required, using: i. The CHAIN soft key, which enables selection of both the Chain and it’s Slave: ii. The ASF1/ASF2 soft key, which presents two soft keys ...

[Page 60] Raymarine 530

3-12 SL520/530/631 PLUS Chartplotter Displays Selecting a Waypoint Selecting a Waypoint Positioning the cursor over a waypoint selects that waypoint and accesses the waypoint soft keys. These keys enable you to GOTO (described in Section 3.5), EDIT (...

[Page 61] Raymarine 530

Chapter 3: Standard Chart Operations 3-13 Editing the Waypoint Details ➤ To remove the waypoint data box and soft keys either: Move the cursor away from the waypoint, or press CLEAR. ➤ To display the waypoint details from the waypoint list: Sele...

[Page 62] Raymarine 530

3-14 SL520/530/631 PLUS Chartplotter Displays Erasing a Waypoint 5. To edit the waypoint position, press the EDIT WAYPOINT soft key, followed by POSITION. The Waypoint Position pop-up is displayed. Use the soft keys to select LAT, LON, BRG or RNG. Us...

[Page 63] Raymarine 530

Chapter 3: Standard Chart Operations 3-15 Using the ST60 or ST80 Navigator Keypad CAUTION: Take care when editing waypoints as it is possible to move waypoints that are used in routes stored in the Route Database. In such instances, the stored rout...

[Page 64] Raymarine 530

3-16 SL520/530/631 PLUS Chartplotter Displays Using the ST60 or ST80 Navigator Keypad Most of the alphanumeric keys are used to input multiple characters. Each time you press one of these keys in succession, the next character on that key is input....

[Page 65] Raymarine 530

Chapter 3: Standard Chart Operations 3-17 Using the ST60 or ST80 Navigator Keypad Editing Entries in the Waypoint, Route, or Track Lists You can also use the Navigator Keypad to edit an existing item or to name a new item in the Waypoint List, Rout...

[Page 66] Raymarine 530

3-18 SL520/530/631 PLUS Chartplotter Displays Working with Routes 3.4 Working with Routes A route is made up of a series of waypoints (maximum 50). To make a route you place a series of waypoints on the chart, or you can select waypoints from the Way...

[Page 67] Raymarine 530

Chapter 3: Standard Chart Operations 3-19 Creating a New Route ➤ To access the route soft keys, press the default soft key ROUTE: Creating a New Route Note: If there is a current route, it is cleared when you select MAKE ROUTE.If you are following ...

[Page 68] Raymarine 530

3-20 SL520/530/631 PLUS Chartplotter Displays Creating a New Route Note: If you Clear the route before it is Saved, the waypoint is removed. 4. Move the cursor to the next waypoint position. A dotted line connects the cursor to the last placed waypoi...

[Page 69] Raymarine 530

Chapter 3: Standard Chart Operations 3-21 Creating a New Route The availableWaypoints are listed in the left hand column (alphanumeric); the right hand column lists the waypoints in the New Route, the number indicates its order in the route. The lowe...

[Page 70] Raymarine 530

3-22 SL520/530/631 PLUS Chartplotter Displays Saving the Current Route Saving the Current Route You can save up to 20 named routes in the route database list. These routes can then be re-displayed and followed at a later date. When you save the rout...

[Page 71] Raymarine 530

Chapter 3: Standard Chart Operations 3-23 Clearing the Current Route You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator Keypad on page 3-15) to name the route. 5. Press ENTER to finish and clear the Name List, or press CLEAR to can...

[Page 72] Raymarine 530

3-24 SL520/530/631 PLUS Chartplotter Displays Displaying Route Information Figure 3-7: Route List Window Displaying Route Information You can display the following information that relates to your route: • Route leg or waypoint information, using ...

[Page 73] Raymarine 530

Chapter 3: Standard Chart Operations 3-25 Displaying Route Information Using Route Information to Review Your Passage Plan You can view data for all the waypoints in the current route, or any saved route. You select the route from the database list ...

[Page 74] Raymarine 530

3-26 SL520/530/631 PLUS Chartplotter Displays Using the Route List to Erase and Name a Route Figure 3-8: Route Information Window 4. Press ENTER to remove the Route Information window, then ENTER or CLEAR to return to the route soft keys. 5. To ret...

[Page 75] Raymarine 530

Chapter 3: Standard Chart Operations 3-27 Editing a Route 3. If you NAME a route, use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or nu...

[Page 76] Raymarine 530

3-28 SL520/530/631 PLUS Chartplotter Displays Editing a Route Adding Waypoints at the End of the Route ➤ To add waypoints at the end of the route: 1. Press the ROUTE soft key, followed by the EDIT ROUTE soft key. The Make Route soft keys are displa...

[Page 77] Raymarine 530

Chapter 3: Standard Chart Operations 3-29 Following Routes and Going to Points 3.5 Following Routes and Going to Points The default soft key GOTO accesses the functions to FOLLOW arouteandGOTO a waypoint or cursor. When you select the target destin...

[Page 78] Raymarine 530

3-30 SL520/530/631 PLUS Chartplotter Displays Follow a Route You should always check the target waypoint before initiating a follow route. ➤ To follow the current route: 1. Press the GOTO default soft key. The Goto/Follow soft keys are displayed. 2...

[Page 79] Raymarine 530

Chapter 3: Standard Chart Operations 3-31 Target Point Arrival Target Point Arrival The arrival alarm is used to alert you when the vessel is approaching the target point. The arrival alarm is defined as a circle (not visible on the screen) around th...

[Page 80] Raymarine 530

3-32 SL520/530/631 PLUS Chartplotter Displays Going To an Individual Target Point Advancing to a Waypoint ➤ Once you are following a route, you can advance to the next waypoint, even if you have not reached the current target waypoint: 1. If nece...

[Page 81] Raymarine 530

Chapter 3: Standard Chart Operations 3-33 Stop Follow or Stop Goto 2. Press the GOTO WAYPOINT soft key. Navigation to the selected waypoint begins. The soft key STOP GOTO is dis- played. 3. To return to the default soft key display, move the cursor ...

[Page 82] Raymarine 530

3-34 SL520/530/631 PLUS Chartplotter Displays Transferring Waypoints and Routes 3.6 Transferring Waypoints and Routes Displayed SeaTalk Waypoints In an integrated system, when a route is made current on any SeaTalk equipment it is sent to all SeaTa...

[Page 83] Raymarine 530

Chapter 3: Standard Chart Operations 3-35 Transferring Waypoints and Routes ➤ To save waypoints to, or load waypoints from a user cartridge: CAUTION: Loading waypoints from a user cartridge overwrites any existing waypoint and route lists. 1. Ins...

[Page 84] Raymarine 530

3-36 SL520/530/631 PLUS Chartplotter Displays Transferring Waypoints and Routes ➤ To receive incoming waypoints on SeaTalk or NMEA: 1. To display the waypoint list press MARKS followed by the WAYPOINT LIST soft key. Press the WAYPOINT TRANSFER so...

[Page 85] Raymarine 530

Chapter 3: Standard Chart Operations 3-37 Using Tracks 3.7 Using Tracks The Track function is used to mark on-screen the trail that your vessel has followed, as if it had left a visible fixed wake. While the track is switched on it is recorded in the...

[Page 86] Raymarine 530

3-38 SL520/530/631 PLUS Chartplotter Displays Setting Up a Track Setting Up a Track You use the track soft keys to switch the track on and to specify the interval, as time or distance, at which track points are saved. The time interval between track ...

[Page 87] Raymarine 530

Chapter 3: Standard Chart Operations 3-39 Clearing the Current Track 2. Press the TRACK OFF ON soft key to toggle tracks on. Your vessels trail will be displayed on-screen, with a line joining the points at the selected interval. Clearing the Curren...

[Page 88] Raymarine 530

3-40 SL520/530/631 PLUS Chartplotter Displays Managing Tracks 2. The next available entry on the track list is highlighted. (If required, you can use the trackpad to select another position in the list; this can be a blank slot, or an existing track ...

[Page 89] Raymarine 530

Chapter 3: Standard Chart Operations 3-41 SmartRoute SmartRoute SmartRoute enables the current track, or the last segment of a track with breaks, to be converted to a route (the track could have been retrieved from the track list). SmartRoute places ...

[Page 90] Raymarine 530

3-42 SL520/530/631 PLUS Chartplotter Displays SmartRoute ...

[Page 91] Raymarine 530

Chapter 4: Further Chart Operations 4-1 Introduction Chapter 4: Further Chart Operations 4.1 Introduction This chapter explains how to use the additional functions that are provided on the chartplotter display. It covers the following topics: • Me...

[Page 92] Raymarine 530

4-2 SL520/530/631 PLUS Chartplotter Displays Measuring Distances Using the VRM/EBL Key 4.2 Measuring Distances Using the VRM/EBL Key You can obtain an accurate measurement of the distance and bearing between two points by using the VRM/EBL key. ➤...

[Page 93] Raymarine 530

Chapter 4: Further Chart Operations 4-3 Measuring Distances Using the VRM/EBL Key ➤ To re-position one end of the ruler line: 1. Move the cursor over the ruler line towards the end that you want to re- position, until the letters A→ B are displ...

[Page 94] Raymarine 530

4-4 SL520/530/631 PLUS Chartplotter Displays Alarms and Timers 4.3 Alarms and Timers Alarm Reporting The chartplotter reports the following alarms, that are set using the ALARMS key: Alarm Indicates: Arrival Your vessel has arrived at the active way...

[Page 95] Raymarine 530

Chapter 4: Further Chart Operations 4-5 Setting Alarms and Timers Setting Alarms and Timers ➤ Tosetupanalarmortimer: 1. Press the ALARMS key. The Alarms Set Up menu is displayed, showing the current settings (see Figure 4-2). 2. Use the trackpad t...

[Page 96] Raymarine 530

4-6 SL520/530/631 PLUS Chartplotter Displays Man Overboard (MOB) 4.4 Man Overboard (MOB) If you lose a person or object overboard, and need to return to the location, you should use the Man Overboard (MOB) function. You can select the type of data u...

[Page 97] Raymarine 530

Chapter 4: Further Chart Operations 4-7 Cursor Echo ➤ To cancel the MOB, press and hold the MARKS key for 2 seconds. The chart is re-drawn at its previous scale, and the MOB symbol and data box are removed. Note: The MOB procedure can also be initi...

[Page 98] Raymarine 530

4-8 SL520/530/631 PLUS Chartplotter Displays GPS Setup 4.6 GPS Setup GPS set up page provides you with information and the status of the tracked navigation satellites for a SeaTalk GPS. It also enables you to SET UP a SeaTalk Differential GPS, by man...

[Page 99] Raymarine 530

Chapter 4: Further Chart Operations 4-9 GPS Setup Restart GPS This soft key enables re-acquisition of a GPS position fix. Note: Under normal circumstances RESTART GPS is not required. D-GPS Set Up The D-GPS SET UP function provides the ability to set...

[Page 100] Raymarine 530

4-10 SL520/530/631 PLUS Chartplotter Displays Data Log Mode Note: If the display unit is receiving RTCM data via NMEA, repeating a dif- ferential fix from another unit, the MODE soft key is set to AUTO and is grayed out. If receiving RTCM data, the s...