Sharp UX-BA50 Operation Manual

Download or browse on-line these Operation Manual for Sharp UX-BA50 Fax Machine.

Sharp UX-BA50 Manual Information:

This manual for Sharp UX-BA50, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 123 pages, and the size of the file at download is 5.2 Mb. The document type is Operation Manual.

Download Manual

Summary of Contents:

[Page 1] Sharp UX-BA50

FACSIMILE OPERATION MANUAL UX-BA50A_ENGLISH_E4454 MODEL UX-BA50 UX-BA50 FACSIMILE 1. Installation 2. Using the Answering Machine 3. Sending Faxes 4. Receiving Faxes 5. Making Copies 6. Special Functions 7. Printing Lists 8. Maintenance 9. Troubleshoo...

[Page 2] Sharp UX-BA50

WARRANTY Facsimile Products Congratulations on Your Purchase! FOR THE SERVICING OF PRODUCTS PURCHASED IN NEW ZEALAND CONTACT YOUR SELLING DEALER/RETAILER OR FOR REFERRAL TO A SERVICE CENTRE, CALL SHARP CUSTOMER SERVICES TELEPHONE: 09 573 011...

[Page 3] Sharp UX-BA50

1 Introduction *Quality mode is initially turned off. To turn on Qualit...

[Page 4] Sharp UX-BA50

2 Telephone function Yes (cannot be used if power fails) Applicable telephone line Public switched telephone network Reception modes TEL/FAX, TEL, FAX, A.M. Automatic document feeder 10 sheets max. (A4, 80 g/m 2 paper) Input document size Automatic...

[Page 5] Sharp UX-BA50

3 As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production un...

[Page 6] Sharp UX-BA50

4 This machine must only be connected to a 230-240 V, 50 Hz, earthed (3-prong) outlet. Connecting it to any other kind of outlet will damage the machine. Never insert objects of any kind into slots or openings on the machine. This could create a ri...

[Page 7] Sharp UX-BA50

5 - Connect the equipment to an outlet on a different circuit to that which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. For Australia: The Ringer Equivalence Number (REN) for this equipment is wri...

[Page 8] Sharp UX-BA50

6 Table of Contents A Look at the Operation Panel 8 1. Installation 11 Unpacking Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

[Page 9] Sharp UX-BA50

Table of Contents 7 Using FAX Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Using TEL Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Optional Reception Settings . . . ....

[Page 10] Sharp UX-BA50

8 Z A DIGITAL SPEAKERPHONE RECEPTION TEL/FAX A.M. INK REC/MEMO PLAY TEL FAX RESO. 3 4 5 6 11 13 14 15 16 17 18 1 2 10 129 7 7 8 DELETEREPEAT SKIP Digital Answering System REC/MEMO key Press this key to record an outgoing message or memo (pages 35 and...

[Page 11] Sharp UX-BA50

9 Arrow keys Use these keys to scroll through and select settings, and to search for auto- dial numbers (page 64). FUNCTION key Press this key followed by the arrow keys to select special functions and settings. Number keys Use these keys to dial nu...

[Page 12] Sharp UX-BA50

10 COPY/HELP key When a document is in the feeder, press this key to make a copy of the document (page 83). At any other time, press this key to print out the Help List, a quick reference guide to the operation of your fax machine. 18 The microphon...

[Page 13] Sharp UX-BA50

11 1. Installation 1. Installation Unpacking Checklist If any are missing, contact your dealer or retailer. Before setting up, make sure you have all of the following items. Operation manual Handset Handset cord Telephone line cord Print ca...

[Page 14] Sharp UX-BA50

Attachments 12 Attachments Points to keep in mind when setting up Do not place the machine in direct sunlight. Do not place the machine near heaters or air conditioners. Keep dust away from the machine. About condensation If the machine is move...

[Page 15] Sharp UX-BA50

Attachments 13 1. Installation Connecting the handset Connect the handset as shown and place it on the handset rest. ♦ The ends of the handset cord are identical, so they will go into either socket. Make sure the handset cord goes into the socke...

[Page 16] Sharp UX-BA50

Attachments 14 Attaching the paper tray Attach the paper tray. Attach the paper tray extension. Click! Note: The paper tray extension has a top side and a bottom side. If the tabs do not go into the holes, turn the support over. Insert horizontal...

[Page 17] Sharp UX-BA50

Loading Printing Paper 15 1. Installation Loading Printing Paper You can load up to 100 sheets of A4-size paper (60 - 80 g/m 2 ) in the paper tray (at room temperature; maximum stack height should not be higher than the line on the tray). 1 Fan th...

[Page 18] Sharp UX-BA50

Connecting the Power Cord 16 Connecting the Power Cord Plug the power cord into a 230-240 V, 50 Hz, earthed AC (3-prong) outlet. Caution! ♦ Make sure you have removed all of the packing tape before plugging in the power cord (see page 12). Pluggin...

[Page 19] Sharp UX-BA50

Installing the Print Cartridge 17 1. Installation If PRINTER ERROR or PRINTER ERROR/CHECK PAPER appears... In the event that the display shows either of the above messages, you must clear the error before installing the print cartridge. The error ...

[Page 20] Sharp UX-BA50

Installing the Print Cartridge 18 1 Press . • Make sure the handset is on its cradle. If the handset is not on the cradle, pressing will have no effect. • The print cartridge holder moves to the cartridge replacement position. 2 Open the oper...

[Page 21] Sharp UX-BA50

Installing the Print Cartridge 19 1. Installation 5 Make sure the cartridge holder has moved slightly away from the right side of the compartment, and then pull the green lever and open the cartridge holder cover. • If you are replacing the car...

[Page 22] Sharp UX-BA50

Installing the Print Cartridge 20 8 Close the print compartment cover. 9 Close the operation panel, pressing down firmly to make sure it clicks into place. 10 Press to make the print cartridge holder return to its home position. 11 Press (NEW)...

[Page 23] Sharp UX-BA50

Installing the Print Cartridge 21 1. Installation 12 Press . If you selected “OLD” in the previous step, this completes the installation procedure. (Note: If you find that print quality is not satisfactory after reinstalling the old cartridg...

[Page 24] Sharp UX-BA50

Installing the Print Cartridge 22 15 Press the number keys to enter the number of the straightest line. Example: • If you make a mistake, press and then repeat the entry. 16 Press . • This completes the alignment procedure. START/ MEMORY Not...

[Page 25] Sharp UX-BA50

Installing the Print Cartridge 23 1. Installation 4 Press to turn on Quality mode, or to turn it off. 5 Press to return to the date and time display. HQ FAX PRINT The display briefly shows your selection, then: High-quality fax print setting (...

[Page 26] Sharp UX-BA50

Connecting the Telephone Line Cord 24 Connecting the Telephone Line Cord Insert one end of the telephone line cord into the adapter. Insert the other end of the line cord into the socket on the back of the machine marked TEL. LINE. Plug the adapter...

[Page 27] Sharp UX-BA50

Connecting the Telephone Line Cord 25 1. Installation Moving your fax and reconnecting If it is necessary to move your fax to a new location, first disconnect the telephone line cord before disconnecting the power lead. When reconnecting, it is nec...

[Page 28] Sharp UX-BA50

Entering Your Name and Fax Number 26 Entering Your Name and Fax Number Once you enter this information, it will automatically appear at the top of each fax page you send. Before you begin sending faxes, enter your name and fax (telephone) numb...

[Page 29] Sharp UX-BA50

Entering Your Name and Fax Number 27 1. Installation 4 Enter your fax number by pressing the number keys (max. 20 digits). • To insert a space between digits, press . To enter “+”, press . • To clear a mistake, press . 5 Press . 6 Enter ...

[Page 30] Sharp UX-BA50

Setting the Date and Time 28 Setting the Date and Time 1 Press once and 3 times. 2 Press once and once. 3 Press once. 4 Enter a two-digit number for the day (“01” to “31”). Example: the 5 th • To correct a mistake, press to ...

[Page 31] Sharp UX-BA50

Setting the Date and Time 29 1. Installation 5 Enter a two-digit number for the month (“01” for January, “02” for February, “12” for December, etc.). Example: January 6 Enter the year (four digits). Example: 2004 7 Enter a t...

[Page 32] Sharp UX-BA50

Setting the Reception Mode 30 Setting the Reception Mode The machine has four modes for receiving incoming faxes: FAX mode: Select this mode when you only want to receive faxes on your line. The fax machine will automatically answer all calls and re...

[Page 33] Sharp UX-BA50

Volume Adjustment 31 1. Installation Volume Adjustment You can adjust the volume of the speaker and ringer using the up and down arrow keys. 1 Press . 2 Press or to select the desired volume level. • Press again to turn off the speaker....

[Page 34] Sharp UX-BA50

Volume Adjustment 32 1 Press or to select the desired volume level. (Make sure has not been pressed and a document is not loaded in the feeder.) • The ringer will ring once at the selected level. 2 If you selected RINGER: OFF OK ? to tu...

[Page 35] Sharp UX-BA50

Volume Adjustment 33 1. Installation Error beep off The machine normally sounds three beeps to alert you when an error occurs during transmission, reception, or copying. The machine also sounds a double-beep when you press an invalid key on the ope...

[Page 36] Sharp UX-BA50

Volume Adjustment 34 3 Press once. 4 Press to turn on the end beep or to turn off the end beep. 5 Press to return to the date and time display. The display briefly shows your selection, then: KEY TONE Key tone off The fax machine normally sou...

[Page 37] Sharp UX-BA50

35 2. Answering Machine 1 Press once and once. 2 Press once. 3 Lift the handset. REC/MEMO 2. Using the Answering Machine The built-in answering machine allows you to receive both voice messages and faxes while you are out. Recording an Outgo...

[Page 38] Sharp UX-BA50

Operating the Answering Machine 36 To listen to the outgoing message To listen to the outgoing message, follow Steps 1 and 2 of the above procedure and then press . Note that the general outgoing message cannot be erased. If you need to change it,...

[Page 39] Sharp UX-BA50

Operating the Answering Machine 37 2. Answering Machine Note: In A.M. mode, the machine will automatically switch to fax reception if it detects six seconds of silence after answering a call. For this reason, if a caller pauses for this length of ...

[Page 40] Sharp UX-BA50

Operating the Answering Machine 38 Listening to received messages If you have received messages, the display will show the number of messages received. Follow the steps below to listen to your messages. 1 Press . • If you only want to listen to ne...

[Page 41] Sharp UX-BA50

Operating the Answering Machine 39 2. Answering Machine Erasing received messages It is important to erase received messages after you listen to them to ensure that the memory does not become full. ♦ Erasing all messages: To erase all messages, p...

[Page 42] Sharp UX-BA50

Optional Answering Machine Settings 40 1 Press once and once. 2 Press once and once. 3 Press . 4 Press a number from 1 to 4 to select the desired ICM recording time. 5 Press to return to the date and time display. 15 seconds 60 seconds 30 s...

[Page 43] Sharp UX-BA50

Optional Answering Machine Settings 41 2. Answering Machine 1 Press once and once. 2 Press once and twice. 3 Press . 4 Press to select YES (switch to FAX mode), or to select NO. 5 Press to return to the date and time display. ON A.M....

[Page 44] Sharp UX-BA50

Transfer Function 42 3 Press . 4 Press to turn on OGM only mode, or to turn it off. 5 Press to return to the date and time display. The display briefly shows your selection, then: TOLL SAVER Transfer Function The Transfer function is used to ...

[Page 45] Sharp UX-BA50

Transfer Function 43 2. Answering Machine 4 Press the number keys to enter the transfer number. • To insert a pause between any two digits of the number, press . 5 Press . 6 Press to return to the date and time display. START/ MEMORY Recording ...

[Page 46] Sharp UX-BA50

Transfer Function 44 4 Press and speak into the handset to record the message. • The transfer message can be up to 15 seconds long. While recording, the display will show the time left to record. 5 When finished, replace the handset or press . ...

[Page 47] Sharp UX-BA50

Override Ringing 45 2. Answering Machine 6 Each time the machine receives an incoming message, it will call your programmed transfer number. When you answer, you will hear your recorded message telling you that the call is a transfer call. On the ...

[Page 48] Sharp UX-BA50

Override Ringing 46 2 Press once and 3 times. 3 Press . 4 Press the number keys to enter a 3-digit override code. 5 Press to store the override code, and then to return to the date and time display. START/ MEMORY OVERRIDE CODE Overriding the...

[Page 49] Sharp UX-BA50

Remote Operations 47 2. Answering Machine 1 Press once and once. 2 Press once and twice. 3 Press . 4 Press the number keys to enter a 3-digit remote code number. 5 Press to store the remote number, and then to return to the date and tim...

[Page 50] Sharp UX-BA50

Remote Operations 48 1 Press once and once. 2 Press once. 3 Press once. 4 Press to turn on the Toll Saver function, or to turn it off. 5 Press to return to the date and time display. Retrieving your messages 1 Call the machine from a ton...

[Page 51] Sharp UX-BA50

Remote Operations 49 2. Answering Machine 3 While the messages are playing, you can do any of the following: • Repeat: To listen to a message a second time, press and on the telephone before that message ends. To move back to the previous me...

[Page 52] Sharp UX-BA50

Remote Operations 50 Note: You can also call the machine and perform remote operations when the reception mode is set to FAX. In this case, when you call the machine, press immediately after it answers (before you hear the fax tone), and then con...

[Page 53] Sharp UX-BA50

Remote Operations 51 2. Answering Machine Recording a new outgoing message 1 Press and on the telephone. 2 When you hear a short beep, speak into the telephone to record the new message. • The message can be up to 15 seconds long. After 15 se...

[Page 54] Sharp UX-BA50

Remote Operations 52 Recording a memo You can record a memo for yourself or other users of the machine. The memo will be played back when incoming messages are listened to. 1 Press and on the telephone. 2 When you hear a short beep, speak into t...

[Page 55] Sharp UX-BA50

53 3. Sending Faxes 3. Sending Faxes Transmittable Documents Size and weight 52 g/m² Minimum document size: Minimum size Minimum weight 10 sheets at once: Size: A4 (210 x 297 mm) Weight: 80 g/m 2 1 sheet at a time (manual feeding): Size: 210 ...

[Page 56] Sharp UX-BA50

Loading the Document 54 Other restrictions ♦ The scanner cannot recognise yellow, greenish yellow, or light blue ink. ♦ Ink, glue, and correcting fluid on documents must be dry before they pass through the document feeder. ♦ All clips, staples...

[Page 57] Sharp UX-BA50

Loading the Document 55 3. Sending Faxes 3 Adjust the resolution and/or contrast settings as explained on page 56, then dial the receiving machine as explained on page 59. Removing a document from the feeder Important! Do not try to remove a docume...

[Page 58] Sharp UX-BA50

Adjusting the Resolution and Contrast 56 Adjusting the Resolution and Contrast If desired, you can adjust the resolution and contrast before sending a document. Note: The resolution and contrast settings are only effective for sending a document. ...

[Page 59] Sharp UX-BA50

Adjusting the Resolution and Contrast 57 3. Sending Faxes Note: In order to transmit in SUPER FINE resolution, the receiving fax machine must also have that resolution. If it doesn’t, your machine will automatically step down to the next best av...

[Page 60] Sharp UX-BA50

Adjusting the Resolution and Contrast 58 Changing the default resolution If desired, you can change the default resolution for faxing documents to FINE. Follow the steps below. 1 Press once and 3 times. 2 Press once. 3 Press once. 4 Press to...

[Page 61] Sharp UX-BA50

Sending a Fax by Normal Dialling 59 3. Sending Faxes 1 Load the document(s). • If desired, press to set the resolution and/or contrast. 2 Pick up the handset or press . Listen for the dial tone. 3 Dial the number of the receiving machine by ...

[Page 62] Sharp UX-BA50

Sending a Fax by Automatic Dialling 60 Sending a Fax by Automatic Dialling You can store your most frequently dialled fax or phone numbers in the machine for automatic dialling. Up to 30 numbers can be stored. ♦ Auto-dial numbers are dialled by pr...

[Page 63] Sharp UX-BA50

Sending a Fax by Automatic Dialling 61 3. Sending Faxes 3 Enter the fax or phone number by pressing the number keys. Up to 32 digits can be entered. (Note: A space cannot be entered.) • To clear a mistake, press . • If a pause is required betw...

[Page 64] Sharp UX-BA50

Sending a Fax by Automatic Dialling 62 Editing and clearing auto-dial numbers If you need to make changes to a previously stored auto-dial number, or clear a number, follow these steps: 1 Press once and once. 2 Press or until the number that...

[Page 65] Sharp UX-BA50

Sending a Fax by Automatic Dialling 63 3. Sending Faxes 6 Press . 7 Make the desired changes to the name. • Press or to move the cursor to the letter or letters you wish to change, and then press the appropriate number key repeatedly until t...

[Page 66] Sharp UX-BA50

Sending a Fax by Automatic Dialling 64 Using an auto-dial number Once you have stored a fax or phone number, you can use it to send a fax or make a phone call. 1 If you are sending a fax, load the document(s). • If desired, press to set the re...

[Page 67] Sharp UX-BA50

Sending a Fax by Automatic Dialling 65 3. Sending Faxes Sending a fax by Direct Keypad Dialling You can also enter a full number with the number keys and then press the key to begin dialling. You can use this method to dial a full number when you...

[Page 68] Sharp UX-BA50

Sending a Fax by Automatic Dialling 66 1 If you are sending a fax, load the document(s). • If desired, press to set the resolution and/or contrast. 2 Press once. <REDIAL> appears in the display, followed by the last number dialled. Mak...

[Page 69] Sharp UX-BA50

Sending a Fax by Automatic Dialling 67 3. Sending Faxes ♦ Under certain conditions (for example if a person answers the call on a telephone), automatic redialling may stop before two redialling attempts are made. Error Correction Mode The fax ma...

[Page 70] Sharp UX-BA50

Using the Speakerphone to Make a Phone Call 68 Using the Speakerphone to Make a Phone Call You can use the speakerphone to make a phone call. 1 Press . 2 Dial using one of the following methods: • Press the number keys. • Press repeatedly to s...

[Page 71] Sharp UX-BA50

Batch Page Numbering 69 3. Sending Faxes Batch Page Numbering You can change the page numbering of the transmitted document from simple numbering ("P.01", "P.02", etc.) to batch numbering, which means that a slash and the total...

[Page 72] Sharp UX-BA50

Sending a Fax From Memory 70 Sending a Fax From Memory You can scan a document into the fax’s memory and send the document from memory. This increases transmission speed and allows you to send a fax to multiple destinations in a single operation....

[Page 73] Sharp UX-BA50

Sending a Fax From Memory 71 3. Sending Faxes 5 Repeat Steps 3 and 4 for each of the other destinations to which you wish to send the fax (maximum of 20). • To check your selected destinations, press to scroll through them. To delete a destina...

[Page 74] Sharp UX-BA50

Sending a Fax From Memory 72 If the memory becomes full... If the memory becomes full while the document is being scanned, MEMORY IS FULL will appear in the display. ♦ Press if you want to transmit the pages which have been stored up to that po...

[Page 75] Sharp UX-BA50

73 4. Receiving Faxes 4. Receiving Faxes Using TEL/FAX Mode When the reception mode is set to TEL/FAX, your fax machine automatically answers all calls on two rings (the number of rings can be changed as explained on page 75). After answering, yo...

[Page 76] Sharp UX-BA50

Using A.M. Mode 74 Pseudo Ring Duration for Tel/Fax Mode If desired, you can change the duration of pseudo ringing in Tel/Fax mode. 1 Press once and 3 times. 2 Press once and 5 times. 3 Press once. 4 Enter a number as follows for the desired...

[Page 77] Sharp UX-BA50

Using FAX Mode 75 4. Receiving Faxes When the reception mode is set to FAX, the fax machine will automatically answer all calls on two rings (the number of rings can be changed as explained below) and receive incoming faxes. 2 rings Fax reception ...

[Page 78] Sharp UX-BA50

Using TEL Mode 76 2 Press once and once. 3 Press once. 4 Enter the desired number of rings (any number from 2 to 4). Example: 3 rings 5 Press to return to the date and time display. Using TEL Mode The display briefly shows your selection, ...

[Page 79] Sharp UX-BA50

Using TEL Mode 77 4. Receiving Faxes 1 When the fax machine rings, pick up the handset. 2 If you hear a fax tone, wait until the display shows RECEIVING and then replace the handset. 3 If the other party first speaks with you and then wants to s...

[Page 80] Sharp UX-BA50

Using TEL Mode 78 1 Answer the extension phone when it rings. 2 If you hear a soft fax tone, wait until your fax responds (the extension phone will go dead), then hang up. 3 If the fax doesn't respond, or if the other party first talks to you ...

[Page 81] Sharp UX-BA50

Optional Reception Settings 79 4. Receiving Faxes 1 Press once and 3 times. 2 Press once and 6 times. 3 Press once. 4 Press to turn on the function, or to turn it off. 5 Press to return to the date and time display. Optional Recept...

[Page 82] Sharp UX-BA50

Optional Reception Settings 80 Reception Ratio The machine has been set at the factory to automatically reduce the size of received documents to fit the size of the printing paper. This ensures that data on the edges of the document are not cut off...

[Page 83] Sharp UX-BA50

Substitute Reception to Memory 81 4. Receiving Faxes Substitute Reception to Memory In situations where printing is not possible, such as when the machine runs out of paper, the print cartridge needs replacement, or the paper jams, incoming faxes ...

[Page 84] Sharp UX-BA50

82 5. Making Copies Your fax machine can also be used to make copies. Single and multiple copies (up to 99 per original) can be made, enabling the machine to double as a convenience office copier. 1 Load the document(s) face down. (Maximum of 10...

[Page 85] Sharp UX-BA50

Making Copies 83 5. Making Copies 1 Press once and twice. 2 Press once and once. 3 Press once. Display: PRINT SET-UP COPY CUT-OFF 1=YES, 2=NO If MEMORY IS FULL appears... If you place a large number of originals in the feeder, the memory may...

[Page 86] Sharp UX-BA50

Making Copies 84 High-quality copy setting (fast/slow printing of copies) The high-quality copy setting controls the speed at which copies are printed. If you prefer a higher quality image at a slower printing speed, turn on this setting. If you pr...

[Page 87] Sharp UX-BA50

85 6. Special Functions 6. Special Functions Caller ID (Requires Subscription to Service) If you subscribe to a caller identification service from your telephone company, you can have the fax machine display the name and number of the caller when...

[Page 88] Sharp UX-BA50

Caller ID (Requires Subscription to Service) 86 How Caller ID operates When you receive a call, the name and phone number of the caller will appear in the display, beginning just before the second ring. The information will continue to be displayed...

[Page 89] Sharp UX-BA50

Caller ID (Requires Subscription to Service) 87 6. Special Functions Note: For all units installed in New Zealand, the direct use of the displayed number for call back does not operate properly and must not be used. It is necessary to manually ent...

[Page 90] Sharp UX-BA50

Caller ID (Requires Subscription to Service) 88 To delete calls from the Caller ID list If you want to delete a single call from the caller list, press while the call appears in the display. If you want to delete all calls from the list, hold d...

[Page 91] Sharp UX-BA50

Caller ID (Requires Subscription to Service) 89 6. Special Functions Blocking voice calls If you have turned on Caller ID, you can use the Anti Junk Fax function described in Blocking Reception of Unwanted Faxes in this chapter to block voice ca...

[Page 92] Sharp UX-BA50

Distinctive Ring (Requires Subscription to Service) 90 Distinctive Ring (Requires Subscription to Service) If you subscribe to a distinctive ring service from your telephone company, you will need to turn on the distinctive ring function. When this...

[Page 93] Sharp UX-BA50

Blocking Reception of Unwanted Faxes 91 5. Special Functions 4 Press to turn on distinctive ring, or to turn it off. 5 Press to return to the date and time display. 6 Set the reception mode to FAX. The display briefly shows your selection, t...

[Page 94] Sharp UX-BA50

Polling (Requesting a Fax Transmission) 92 Polling (Requesting a Fax Transmission) Polling allows you to call another fax machine and have it send a document (previously loaded in its feeder) to your machine without assistance from the operator of ...

[Page 95] Sharp UX-BA50

93 7. Printing Lists 7. Printing Lists You can print lists showing settings and information entered in the fax machine, and a report showing recent fax transactions. The lists and report are described below. To print a list, follow these steps. 1...

[Page 96] Sharp UX-BA50

Printing Lists 94 Telephone Number List This list shows the fax and phone numbers that have been stored for automatic dialling. Setup List This list shows your current selections for the FUNCTION key settings. The list also shows your name and fax/...

[Page 97] Sharp UX-BA50

Printing Lists 95 7. Printing Lists Transaction Report This report is printed out automatically after an operation is completed to allow you to check the result. Your fax machine is set at the factory to print out the report only when an error occ...

[Page 98] Sharp UX-BA50

Printing Lists 96 Transaction Report print condition You can change the condition under which a Transaction Report is printed out. Follow the steps below. 1 Press once and 3 times. 2 Press once and 3 times. 3 Press once. 4 Press a number fr...

[Page 99] Sharp UX-BA50

97 8. Maintenance 8. Maintenance Cleaning the Machine Cleaning the scanning glass and rollers Clean the scanning glass and rollers frequently to ensure the quality of transmitted images and copies. 1 Open the operation panel. 2 Push the green leve...

[Page 100] Sharp UX-BA50

Maintenance 98 4 Wipe the scanning glass (exposed by removing the white roller) and rollers with a clean cloth. • Make sure that all dirt and stains (such as correcting fluid) are removed. Dirt and stains will cause vertical lines on transmitt...