Siemens PC 870 User Manual

Download or browse on-line these Equipment Manual for Siemens PC 870 Desktop.

Siemens PC 870 Manual Information:

This manual for Siemens PC 870, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 48 pages, and the size of the file at download is 0.33 Mb. The document type is Equipment Manual.

Download Manual

Summary of Contents:

[Page 1] Siemens PC 870

Preface, Table of Contents Product Overview 1 Description of Device 2 Mounting 3 Maintenance 4 Appendices Technical Data, Keyboard Table A Guidelines for ESD B Index This manual is part of the documentation package with the order number 6AV7691–0AB...

[Page 2] Siemens PC 870

This manual contains information which you must observe for your personal safety and to prevent material damage. The information is denoted by a warning triangle and is differentiated as follows, depending on the degree of danger: ! Danger indicates ...

[Page 3] Siemens PC 870

You will find the registered trademarks of Siemens AG in the preface. The remaining marks used in this publication (or on the CD) may be trademarks, the use of which by third parties for their own purposes could violate the rights of the owner. Pu...

[Page 4] Siemens PC 870

...

[Page 5] Siemens PC 870

i SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Preface Purpose of the manual This manual contains information which you require when using the operating unit of the SIMATIC Panel PC 670 or PC 870. With this information yo...

[Page 6] Siemens PC 870

Preface ii SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Documentation  Commissioning Instructions The Commissioning Instructions are supplied as a paper document. The docu- ment is intended for commissioning engineers ...

[Page 7] Siemens PC 870

Preface iii SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Trademarks The following names are registered trademarks of Siemens AG:  SIMATIC   SIMATIC HMI   HMI   ProTool   ProTool/Lite   Pro...

[Page 8] Siemens PC 870

Preface iv SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Worldwide (Nuremberg) Technical Support (FreeContact) Local time: Mon.-Fri. 7:00 to17:00 Telephone: +49 (180) 5050-222 Fax: +49 (180) 5050-223 E-Mail: techsupport@ a...

[Page 9] Siemens PC 870

Table of Contents v SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Table of Contents Preface i. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

[Page 10] Siemens PC 870

Table of Contents vi SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 B Appendix B: ESD Guidelines B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index Index-1 . . . . . . . . . ...

[Page 11] Siemens PC 870

1-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Product Overview The SIMATIC Panel PC 670 and PC870 are industry-standard PC plat- forms for demanding tasks in the field of PC-based automation. They are designed as fitte...

[Page 12] Siemens PC 870

Product Overview 1-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 1.1 Panel PC 670: Computing and operating units The computing unit is screwed to the rear of the operating unit with two mounting rails and can be separate...

[Page 13] Siemens PC 870

Product Overview 1-3 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01  Function keys/soft keys – 2 x 8 vertical rows of keys with soft-key and optional direct–key functions – 2 x 10 horizontal rows of keys with soft-...

[Page 14] Siemens PC 870

Product Overview 1-4 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 1.2 Panel PC 870: Computing and operating units The computing unit is screwed to the rear of the operating unit with two mounting rails and can be separate...

[Page 15] Siemens PC 870

Product Overview 1-5 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01  Shift key for switching to the second level of key functions  Integrated piezo mouse  Status LEDs for power supply and temperature  USB interf...

[Page 16] Siemens PC 870

Product Overview 1-6 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 ...

[Page 17] Siemens PC 870

2-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Description of Device Table 2-1 indicates which combinations of operating units and computing units can be delivered. Table 2-1 Combinations of operating units and computin...

[Page 18] Siemens PC 870

Description of Device 2-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.1 Operating units with key-based front panels The number of keys, their labeling and their functionality are identical on all operating units featur...

[Page 19] Siemens PC 870

Description of Device 2-3 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.1.2 Keyboard The keyboard is subdivided into different functional groups of keys:  function keys, soft keys  control keys  alpha keys  n...

[Page 20] Siemens PC 870

Description of Device 2-4 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 The alpha keys are used to enter letters, special characters, spaces and underscores: Space Underscore Fig. 2-4 Alpha keys In their basic assignment, ...

[Page 21] Siemens PC 870

Description of Device 2-5 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Most of the numeric keys have also been assigned special characters, arithmetic characters or the plus sign. The special characters are iden- tified i...

[Page 22] Siemens PC 870

Description of Device 2-6 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.2 Operating units with touchscreen front panels The 12.1” version and the 15.1” version of the touchscreen front panels differ in their dimensio...

[Page 23] Siemens PC 870

Description of Device 2-7 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.3 Interfaces The operating unit has interfaces on the front and rear sides. 2.3.1 Front-side USB interface On the front side of the panel (see Figur...

[Page 24] Siemens PC 870

Description of Device 2-8 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.3.3 Interface assignment Table 2-2 Pin assignment of front-side USB interface Pin Name Type Remark 4 4 USB_GND V Chassis ground for external USB in-...

[Page 25] Siemens PC 870

Description of Device 2-9 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.4 Device dimensions 2.4.1 Dimensions of Panel PC 670 T ± 0.510 A± 2 ± 0.5297 10 L± 0.3 Ü B ± 1267 ± 0.5 H ± 0.5 T2± 0.5 +3 Front panel Oper...

[Page 26] Siemens PC 870

Description of Device 2-10 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 2.4.2 Dimensions of Panel PC 870 Operating units L H T * T2 A B Ü (a) with key-based front panels: 12.1” TFT 483 310 187 20 50...

[Page 27] Siemens PC 870

3-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Mounting 3.1 Mounting cut-out 3.1.1 Panel PC 670 A mounting cut-out is required as shown in the figure and explanatory table below: Operating units W H D (mounting depth **...

[Page 28] Siemens PC 870

Mounting 3-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 When installing in an enclosed housing, ensure that there is sufficient volume for air circulation and, if necessary, for swinging out the compu- ting unit (see al...

[Page 29] Siemens PC 870

Mounting 3-3 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 3.2 Installation 3.2.1 Panel PC 670 The operating unit can be fitted in the mounting cut-out with either clamps or screws. Screwed joints are not possible with the...

[Page 30] Siemens PC 870

Mounting 3-4 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 The clamps and grub screws required for installation are supplied with the device. Proceed as follows: 1. Insert the complete operating unit and computing unit int...

[Page 31] Siemens PC 870

Mounting 3-5 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 L1 L2 112 ± 0.5 L4 L5 112 ±0.5 ±156 min. 1.5 – max. 6 L3 ± 1 A1±1 A2 ± 1 Clamp with grub screws Drill hole for ± 0.2 ± 0.2 +1 +1 Rz 120 (in gasket area)...

[Page 32] Siemens PC 870

Mounting 3-6 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Operating unit Computing unit Knurled screw Knurled screw Hinge Hinge Fig. 3-5 Joining the operating and computing units Proceed as follows (Figure 3-6): Drill ...

[Page 33] Siemens PC 870

4-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Maintenance 4.1 Spare parts and accessories The spare parts and accessories which can be delivered are listed be- low. 4.1.1 Spare parts The only spare part is the operatin...

[Page 34] Siemens PC 870

Maintenance 4-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 4.2 Detaching the operating unit from the computing unit It may at some stage become necessary to separate the operating unit from the computing unit, e.g. to r...

[Page 35] Siemens PC 870

Maintenance 4-3 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 To remove the computing unit completely, continue as follows: 3. Remove the cable connectors K1 and K2 of the operating unit (see Figure 4-2) from their corresp...

[Page 36] Siemens PC 870

Maintenance 4-4 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 4.2.2 Panel PC 870 Proceed as follows: 1. Disconnect the power supply. 2. Swing open the mounting panel to obtain access to the rear of the PC 870. 3. Loosen th...

[Page 37] Siemens PC 870

Maintenance 4-5 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Display cable K2 3 ) I/O USB cable K1 3 ) 3 ) Cable folded: 200 mm longer than illustrated 1 ) 1 ) 1 ) Slits for mounting rails ...

[Page 38] Siemens PC 870

Maintenance 4-6 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 4.3 Replacing soft key labeling (operating units with key-based front panels only) The two horizontal and two vertical rows of soft keys of the operating units...

[Page 39] Siemens PC 870

A-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Appendix A: Technical Data A.1 Technical data of operating unit Table A-1 Panel PC technical data Color display 10.4” TFT 1 ) 12.1” TFT 15.1” TFT 12.1” TFT 1 ) To...

[Page 40] Siemens PC 870

Appendix A: Technical Data A-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Interfaces USB 1 x front panel *), 1 x rear panel (internal connection to the computing unit) Safety Protection class Conforms to VDE 0106...

[Page 41] Siemens PC 870

Appendix A: Technical Data A-3 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 A.2 Keyboard table (operating units with key-based front panels) By using the following table, you can check the standard keyboard assignment and...

[Page 42] Siemens PC 870

Appendix A: Technical Data A-4 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Key number Code Key label/name 21 13 p 21a1 31/s ’ 22 12 o 22a1 31 \ 23 11 n 23a1 30/s } 24 10 m 24a1 2f/s { 25 40 F7 26 3e/s F17 (Shift F5) 27...

[Page 43] Siemens PC 870

Appendix A: Technical Data A-5 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Key number Code Key label/name 46 2c (BLANK) 46a1 2d/s _ 47 1d z 48 1c y 48a1 1f/s @ 49 3d F4 50 3b/s F14 (Shift F2) 51 56 - 51a1 57 + 52 27 0 52...

[Page 44] Siemens PC 870

Appendix A: Technical Data A-6 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Key number Code Key label/name 91 44/s,3 S3 (Shift F11) 92 45/s,4 S4 (Shift F12) 93 3a/c,5 S5 (control F1) 94 3b/c,6 S6 (control F2) 95 3c/c,7 S7...

[Page 45] Siemens PC 870

B-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Appendix B: ESD Guidelines What does ESD mean? Virtually all present-day modules incorporate highly integrated MOS devices or components. Due to the technologies used, thes...

[Page 46] Siemens PC 870

Appendix B: ESD Guidelines B-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Handling ESD assemblies A general rule is that assemblies should be touched only when this cannot be avoi- ded in the course of the work that has...

[Page 47] Siemens PC 870

Index Index-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 Index A alpha keys, 2-4 ambient conditions, A-2 arithmetic characters, 2-5 C cable connectors, 4-3, 4-4 certification, A-2 clamps, 1-3, 1-5, 3-4, 3-5 control keys...

[Page 48] Siemens PC 870

Index Index-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/01 protection class, A-2 R relative humidity, A-2 S safety, A-2 safety regulations, A-2 SHIFT key, 1-3, 1-5 shock load, A-2 signs, 2-5 soft keys, 1-3, 1-4, 2-3 speci...