SMC Networks FS1601 - Manual

[Page 1] SMC Networks FS1601

EZ Connect N Draft 11n Wireless USB2.0 Adapter EZ Switch™ 16/24-Port Fast Ethernet Switch SMCFS1601/SMCFS2401 ...

[Page 2] SMC Networks FS1601

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of SMC TECHNOLOGIES CO, LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part...

[Page 3] SMC Networks FS1601

CONTENTS Package Contents.................................................................................................1 Chapter 1 Product Introduction .......................................................................2 1.1 Product Ove...

[Page 4] SMC Networks FS1601

1 Package Contents The following contents should be found in your package: ¾ One SMCFS1601 /SMCFS2401 Switch ¾ One power cord ¾ This User Guide ¾ Mounting screws and two “L” planks ¾ Quick Installation Guide ¾ SMC Warranty C...

[Page 5] SMC Networks FS1601

2 Chapter 1 Product Introduction This chapter describes the features of the model of SMCFS1601/SMCFS2401 16/24-Port 10/100Mbps Fast Ethernet Switch. 1.1 Product Overview SMCFS1601/SMCFS2401 Switch provides 16/24-Port 10/100Mbps Auto- Negot...

[Page 6] SMC Networks FS1601

3 2.1 Front Panel The front panel of SMCFS2401 consists of switch model, switch LED indicators, and 24 10/100Mbps RJ-45 ports. Figure 2-1 SMCFS2401 Switch Front Panel sketch The LED indicators include Power, Link/Act LED indicators, which a...

[Page 7] SMC Networks FS1601

4 Chapter 3 Installation 3.1 Precautions To ensure a long-term and stable performance of the Switch, please pay attention to the following before the installation. 1) Safety Requirements • Before cleaning the Switch, cut off the power su...

[Page 8] SMC Networks FS1601

5 3.2 Installation This Switch can be either installed on the standard 19-inch mountable rack or located on the desktop. Caution: Please unplug the power cord before installing or removing the Switch. 3.2.1 Desktop Installation To insta...

[Page 9] SMC Networks FS1601

6 3.2.2 Rack Installation To install the Switch in an EIA standard-sized, 19-inch rack, follow the instructions described below: 1) Secure the supplied rack-mounting brackets to each side of the Switch with supplied screws, as illustrated in...

[Page 10] SMC Networks FS1601

7 3.3 Connect to Ground Connecting the Switch to ground is to quickly release the lightning over-voltage and over-current of the Switch, which is also a necessary measure to protect the body from electric shock. In different environments, the...

[Page 11] SMC Networks FS1601

8 Figure 3-5 * The figure is to illustrate the application and principle. The power plug you get from the package and the socket in your situation will comply with the regulation in your country, so they may differ from the figure above. ...

[Page 12] SMC Networks FS1601

9 Appendix A: Specifications General Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Topology Star Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex) 20Mbps (FullDuplex) Data Transfer Rate Fast Ethernet: 100Mbps (Half Duplex) 200Mbps (F...

[Page 13] SMC Networks FS1601

10 Appendix B: Troubleshooting 1. The Power LED is not lit ¾ Make sure the AC power cord connected the Switch with power source properly. ¾ Make sure the power source is ON. 2. The Link/Act LED is not lit when a device is connected to t...

[Page 14] SMC Networks FS1601

SMCFS1601_2401_UG_20101102_v1 1.pdf 14 2010-11-30 17:52:37 ...

[Page 15] SMC Networks FS1601

SMCFS1601/SMCFS2401 7109504046 ...