PANASONIC KX-FLB883FX Operating Instructions Manual

Download or browse on-line these Operating Instructions Manual for Panasonic KX-FLB883FX Fax Machine.

Panasonic KX-FLB883FX Manual Information:

This manual for Panasonic KX-FLB883FX, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 108 pages, and the size of the file at download is 8.81 Mb. The document type is Operating Instructions Manual.

Download Manual

Summary of Contents:

[Page 1] Panasonic KX-FLB883FX

Please read these operating instructions before using the unit and save for future reference. L This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service of your service provider. Operating Instructio...

[Page 2] Panasonic KX-FLB883FX

2 Thank you for purchasing a Panasonic fax machine. Caution: L Do not rub or use an eraser on the printed side of recording paper, as the print may smear. Notice for product disposal, transfer, or return: L This product can store your private/confid...

[Page 3] Panasonic KX-FLB883FX

Important Information 3 Important InformationImportant Information For your safety To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit. L The followi...

[Page 4] Panasonic KX-FLB883FX

Important Information 4 Operating safeguards Installation and relocation Make sure that the unit is installed in a well ventilated room so as not to increase density of ozone in the air. Since ozone is heavier than air, it is recommended that air ...

[Page 5] Panasonic KX-FLB883FX

Important Information 5 Laser radiation Fuser unit Note: L During or immediately after printing, the area near the recording paper exit (3) also gets warm. This is normal. Toner cartridge Be careful of the following when you handle the toner cartr...

[Page 6] Panasonic KX-FLB883FX

Important Information 6 Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not ...

[Page 7] Panasonic KX-FLB883FX

Important Information 7 L Do not cover slots or openings on the unit. Inspect the air circulation vents regularly and remove any dust build-up with a vacuum cleaner (1). Routine care L Wipe the outer surface of the unit with a soft cloth. Do not u...

[Page 8] Panasonic KX-FLB883FX

Table of Contents 8 1. Ta ble of Contents 1. Introduction and Installation Accessories 1.1 Supplied accessories .................................. 10 1.2 Accessory information................................. 10 Finding the Controls 1.3 Button descr...

[Page 9] Panasonic KX-FLB883FX

Table of Contents 9 12.Paper Jams Jams 12.1 Recording paper jam ................................... 85 12.2 Document jams (Auto document feeder)..... 88 13.Cleaning Cleaning 13.1 Cleaning the white plates and glass............ 90 13.2 Cleaning the do...

[Page 10] Panasonic KX-FLB883FX

1. Introduction and Installation 10 1 Introduction and InstallationAccess ories 1.1 Supplied accessories *1 Prints about 800 A4-sized pages with a 5 % image area (page 97). Note: L Save the original carton and packing materials for future shipping ...

[Page 11] Panasonic KX-FLB883FX

1. Introduction and Installation 11 Finding the Con trols 1.3 Button descriptions A Station keys L To use the one-touch dial feature (page 42, 46). B {BROADCAST} L To send a document to multiple parties (page 46). C {MANUAL BROAD} L To send a documen...

[Page 12] Panasonic KX-FLB883FX

1. Introduction and Installation 12 1.4 Overview 1.4.1 Front view 1.4.2 Rear view Removing the shipping tape Remove the shipping tape (1) and pad (2). Note: L Shipping tape positions are subject to change without notice. 1 Top cover 2 ADF (Auto Docu...

[Page 13] Panasonic KX-FLB883FX

1. Introduction and Installation 13 Installation 1.5 Toner cartridge and drum unit The supplied toner cartridge is a starter toner cartridge. Caution: L Read the following instructions before you begin installation. After you have read them, open th...

[Page 14] Panasonic KX-FLB883FX

1. Introduction and Installation 14 6 Make sure that the triangles (1) match to install the toner cartridge correctly. 7 Lift the top cover release lever (1) and open the top cover (2). Important: L Close the manual input tray (3) before opening t...

[Page 15] Panasonic KX-FLB883FX

1. Introduction and Installation 15 Caution: L To prevent injuries, be careful not to put your hands under the top cover. To replace the toner cartridge and the drum unit When the display shows the following, replace the toner cartridge. TONER LOW ...

[Page 16] Panasonic KX-FLB883FX

1. Introduction and Installation 16 1.7 Output tray Note: L Do not place the unit in an area where the output tray may be easily bumped into. As the default setting, printed paper is stacked on the output tray as follows. – Upper output tray (“...

[Page 17] Panasonic KX-FLB883FX

1. Introduction and Installation 17 2. Slide the other tab (1) into the right hole (2) of the extender from below until it clicks into place. If the extender is detached 1. Line up the extender (1) underneath the output tray (2), and insert the lef...

[Page 18] Panasonic KX-FLB883FX

1. Introduction and Installation 18 3 Before loading a stack of paper, fan the paper to prevent paper jams. 4 Load the paper, print-side up (1). Important: L Push and lock the plate (2) in the paper input tray, if it is lifted. L Make sure that the...

[Page 19] Panasonic KX-FLB883FX

1. Introduction and Installation 19 1.9 Handset unit 1 Connect the handset cord (1). 2 Connect the handset connector (2). L Remove the seal from the handset unit connection jack if attached. 3 Insert the tab (3) and rib (4). Caution: L When moving t...

[Page 20] Panasonic KX-FLB883FX

2. Preparation 20 2 PreparationConnecti ons and Setup 2.1 Connections Caution: L When you operate this product, the power outlet should be near the product and easily accessible. L Be sure to use the telephone line cord supplied with this unit. L ...

[Page 21] Panasonic KX-FLB883FX

2. Preparation 21 2.2 Dialling mode If you cannot dial (page 44), change this setting according to your telephone line service. 1 {MENU} i {#}{1}{2}{0} DIALLING MODE =TONE [V^] 2 Press {1} or {2} to select the desired setting. {1} “PULSE”: For r...

[Page 22] Panasonic KX-FLB883FX

2. Preparation 22 Document Requirem ents 2.4 Setting the original 2.4.1 Using the scanner glass 1 Open the document cover (1). 2 Place the document FACE DOWN on the scanner glass (2), aligning the top left of the document with the corner to which t...

[Page 23] Panasonic KX-FLB883FX

2. Preparation 23 Maximum document size Effective scanning area L Shaded area will be scanned. Document weight L Single sheet: 45 g/m 2 to 90 g/m 2 L Multiple sheets: 60 g/m 2 to 80 g/m 2 Help 2.5 Help function The unit contains helpful information...

[Page 24] Panasonic KX-FLB883FX

2. Preparation 24 Volum e 2.6 Adjusting volume Important: L Before adjusting volume, set the operation mode to fax mode. If the {FAX} light is OFF, turn it ON by pressing {FAX}. Ringer volume While the unit is idle, press {V} or {^}. L If there are...

[Page 25] Panasonic KX-FLB883FX

2. Preparation 25 2.8 Your logo You can program your logo (name, company name, etc.) so that it appears on the top of each page sent. 1 {MENU} i {#}{1}{0}{2} i {SET} LOGO=| 2 Enter your logo, up to 30 characters (see page 71 for character entry). i...

[Page 26] Panasonic KX-FLB883FX

2. Preparation 26 2.10 Configuring the unit to access the LAN You can print documents, scan documents, receive faxes or send faxes using a computer on the LAN. To enable these features, you need to set the IP address, subnet mask, and default gat...

[Page 27] Panasonic KX-FLB883FX

2. Preparation 27 2.11 Installing Multi-Function Station 2.11.1 Required computer environment Panasonic Multi-Function Station software enables the unit to carry out the following functions: – Printing on plain paper, transparencies, labels and ...

[Page 28] Panasonic KX-FLB883FX

2. Preparation 28 2. Connect the unit with the USB cable (1), then click [Next]. L If the unit is connected to your computer, the model name will be automatically detected. L You can change the name of the unit if necessary. 3. Click [Install], the...

[Page 29] Panasonic KX-FLB883FX

2. Preparation 29 2.12 Starting Multi-Function Station [Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [Multi-Function Station] L Multi-Function Station will appear. [Scan] (page 36) L To scan and display the scanned ima...

[Page 30] Panasonic KX-FLB883FX

3. Printer 30 3 PrinterPrinter 3.1 Printing from Windows applications You can print a file created in a Windows application. For example, to print from WordPad, proceed as follows. 1 Open the document you want to print. 2 Select [Print...] from the...

[Page 31] Panasonic KX-FLB883FX

3. Printer 31 3.1.1 Using the manual input tray You can print not only on plain paper but also on special media (transparencies / labels / envelopes). The manual input tray is used only for printing with the computer and can hold one page at a time...

[Page 32] Panasonic KX-FLB883FX

3. Printer 32 To print on labels Use labels designed for laser printing. We recommend the following: Avery ® 5160/5161/5162/5163/5164/5165/5167/5168 XEROX ® LWH100/LWH110/LWH120/LWH130/LWH140 L Use the manual input tray to print labels. L Load lab...

[Page 33] Panasonic KX-FLB883FX

3. Printer 33 Do not attempt to print on any of the following types of envelopes (these may cause damage to the unit): L Envelopes with clasps, snaps or tie strings L Envelopes with transparent windows L Envelopes that use encapsulated types of adhe...

[Page 34] Panasonic KX-FLB883FX

4. Scanner 34 4 ScannerScanner 4.1 Scanning from the unit (Push Scan) You can easily scan the document by operating the operation panel on the unit. Select following scanning modes depending on the way to use the scanned image. – Viewing using M...

[Page 35] Panasonic KX-FLB883FX

4. Scanner 35 L The e-mail software will automatically start and the scanned image will be attached to a new e- mail message. Note: L To select the default E-mail software, see page 29. L To stop scanning, see page 73. L You can save the images in J...

[Page 36] Panasonic KX-FLB883FX

4. Scanner 36 4.2 Scanning from a computer (Pull Scan) Note: L When scanning a document, we recommend using the scanner glass rather than the auto document feeder for better results. L Do not open the document cover when scanning a document with ...

[Page 37] Panasonic KX-FLB883FX

5. Copier 37 5 CopierCopy 5.1 Making a copy Illegal copies L It is unlawful to make copies of certain documents. Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be imposed on those found guilty....

[Page 38] Panasonic KX-FLB883FX

5. Copier 38 5.1.2 Using the auto document feeder 1 If the {COPY} light is OFF, turn it ON by pressing {COPY}. 2 Set the original (page 22). 3 If necessary, change the resolution and contrast according to the type of document. L To select the resol...

[Page 39] Panasonic KX-FLB883FX

5. Copier 39 Example: 150% enlarged copy Using the scanner glass (1): Using the auto document feeder: Example: 70% reduced copy Using the scanner glass (1): Using the auto document feeder: 5.2.2 To copy 2-sided documents onto 1 page (Quick ID copy f...

[Page 40] Panasonic KX-FLB883FX

5. Copier 40 Note: L You can save the previous page layout setting (feature #467 on page 64). 5.2.3 To make a poster size copy (Poster feature) (Scanner glass only) You can make copies divided in to 4 (“2 × 2”) or 9 (“3 × 3”) sections to...

[Page 41] Panasonic KX-FLB883FX

5. Copier 41 Note: L You can save the previous page layout setting (feature #467 on page 64). 5.2.5 To collate multiple copies The unit can collate multiple copies in the same order as the original document pages. 1 Set the original (page 22). 2 Pr...

[Page 42] Panasonic KX-FLB883FX

6. Telephone 42 6 TelephoneAutomatic Diallin g 6.1 Storing items for the one- touch dial feature and navigator directory The unit provides the one-touch dial feature (14 items) and navigator directory (300 items). L Station 1 to 3 can be used alter...

[Page 43] Panasonic KX-FLB883FX

6. Telephone 43 To search for a name by initial Example: “LISA” 1. {DIRECTORY} 2. Press {V} or {^} to initiate the navigator directory. 3. Press {5} repeatedly to display any name with the initial “L” (see page 71 for character entry). L To ...

[Page 44] Panasonic KX-FLB883FX

7. Fax 44 7FaxSending Faxes 7.1 Sending a fax manually 7.1.1 Using the scanner glass By using the scanner glass, you can send a page from booklets or small size paper that cannot be sent with the auto document feeder. 1 If the {FAX} light is OFF, t...

[Page 45] Panasonic KX-FLB883FX

7. Fax 45 Printing a sending report A sending report provides you with a printed record of transmission results. To print sending reports, make sure feature #401 is activated (page 60). For an explanation of error messages, see page 74. Printing a...

[Page 46] Panasonic KX-FLB883FX

7. Fax 46 7.2 Sending a fax using one- touch dial feature and navigator directory Before using this feature, store the desired names and telephone numbers into one-touch dial feature and navigator directory (page 42). L Make sure that the {FAX} li...

[Page 47] Panasonic KX-FLB883FX

7. Fax 47 2 Press {V} or {^} repeatedly to display the desired broadcast memory (“<BROADCAST1>”, “<BROADCAST2>” or “<MANUAL BROAD>”). i {MENU} i {*} 3 Press {V} or {^} repeatedly to display the desired item you want ...

[Page 48] Panasonic KX-FLB883FX

7. Fax 48 7.4 Sending a computer document as a fax message from your computer You can access the fax function from a Windows application using Multi-Function Station. For example, to send a document created from WordPad, proceed as follows. 1 Ope...

[Page 49] Panasonic KX-FLB883FX

7. Fax 49 7.5.3 Use as a telephone and/or fax (TEL/FAX mode) Your situation You want to answer phone calls yourself and receive faxes automatically without rings. Setup Set the fax machine to TEL/FAX mode (page 50) by pressing {FAX AUTO ANSWER} re...

[Page 50] Panasonic KX-FLB883FX

7. Fax 50 7.7 Receiving a fax manually – Auto answer OFF 7.7.1 Activating TEL mode 1 Make sure feature #404 is set to “TEL” beforehand (page 60). 2 Press {FAX AUTO ANSWER} repeatedly to display “TEL MODE”. L The {FAX AUTO ANSWER} light t...

[Page 51] Panasonic KX-FLB883FX

7. Fax 51 L To answer using the handset of the unit (if connected) or another telephone (3) connected to the same telephone line as this unit (4), lift the handset and talk to the other party. – See “1.1 Supplied accessories”, page 10 and �...

[Page 52] Panasonic KX-FLB883FX

7. Fax 52 L Regarding the remote access code for the answering machine, see the operating instructions of the answering machine. Receiving a voice message and fax document in one call The caller can leave a voice message and send a fax document d...

[Page 53] Panasonic KX-FLB883FX

7. Fax 53 2. Press {>} repeatedly to display “JUNK LIST DISP.”. i {SET} 3. Press {V} or {^} repeatedly to display the desired item. i {<} L To cancel erasing, press {STOP}, then press {MENU}. 4. {SET} i {MENU} 7.11 Receiving a fax into y...

[Page 54] Panasonic KX-FLB883FX

8. Caller ID 54 8 Caller IDCaller ID 8.1 Caller ID service This unit is compatible with the Caller ID service offered by your local telephone company. To use this unit’s Caller ID features, you must subscribe to Caller ID service. Important: L T...

[Page 55] Panasonic KX-FLB883FX

8. Caller ID 55 Note: L The edited telephone number will not be saved in the caller information. To save in the directory, see page 56. To correct a mistake 1. Press {<} or {>} to move the cursor to the incorrect number. 2. Press {STOP} to d...

[Page 56] Panasonic KX-FLB883FX

8. Caller ID 56 8.5 Storing caller information 8.5.1 Into the one-touch dial feature and navigator directory 1 {CALLER ID} 2 Press {V} or {^} repeatedly to display the desired item. 3 {MENU} 4 Select the station key or navigator directory. For stat...

[Page 57] Panasonic KX-FLB883FX

9. Programmable Features 57 9 Programma ble FeaturesFeatures Summary 9.1 Programming 1 {MENU} 2 Press {#} and the 3-digit code (page 58 to 69). 3 Press the desired selection to display the desired setting. L This step may be slightly different depen...

[Page 58] Panasonic KX-FLB883FX

9. Programmable Features 58 9.2 Basic features Feature/Code Selection Setting the date and time {#}{1}{0}{1} Enter the date and time using the dial keypad. See page 24 for details. Setting your logo {#}{1}{0}{2} Enter your logo using the dial keypad....

[Page 59] Panasonic KX-FLB883FX

9. Programmable Features 59 Changing the ring count in FAX ONLY mode {#}{2}{1}{0} {1} “1” {2} “2” (default) {3} “3” {4} “4” {5} “5” {6} “6” {7} “7” {8} “8” {9} “9” Note: L If you are using the unit with an answeri...

[Page 60] Panasonic KX-FLB883FX

9. Programmable Features 60 9.3 Fax features Feature/Code Selection Changing the TEL/FAX delayed ring count {#}{2}{1}{2} If you use an extension telephone in TEL/FAX mode, select the desired number of times the extension telephone rings before the ...

[Page 61] Panasonic KX-FLB883FX

9. Programmable Features 61 Sending a fax at a specific time {#}{4}{1}{2} This feature allows you to take advantage of low-cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time....

[Page 62] Panasonic KX-FLB883FX

9. Programmable Features 62 Changing the fax activation code {#}{4}{3}{4} If you wish to use an extension telephone to receive faxes, activate this feature and program the activation code. Important: L The fax activation code must be different from...

[Page 63] Panasonic KX-FLB883FX

9. Programmable Features 63 Setting the computer for PC fax reception {#}{4}{4}{3} To select the computer that will be used for receiving a fax. See page 26 for details. Resetting fax features to their default settings {#}{4}{5}{9} {0} “NO” (d...

[Page 64] Panasonic KX-FLB883FX

9. Programmable Features 64 9.4 Copy features Feature/Code Selection Changing the default copy resolution {#}{4}{6}{1} To change the default resolution setting for copying. {1} “TEXT/PHOTO”: For documents containing both text and photographs. {2...

[Page 65] Panasonic KX-FLB883FX

9. Programmable Features 65 9.5 PC print features Feature/Code Selection Setting the input tray in PCL ® {#}{7}{6}{0} You can select the input tray that will be used in PCL printing. {1} “#1” (default): Paper input tray {2} “#2”: Manual inpu...

[Page 66] Panasonic KX-FLB883FX

9. Programmable Features 66 Setting the font pitch/point in PCL {#}{7}{7}{0} To set the font pitch/point to be used in PCL printing. 1. {MENU} i {#}{7}{7}{0} i {SET} 2. Enter the font pitch from “00.44” to “99.99”, or the point from “004.0...

[Page 67] Panasonic KX-FLB883FX

9. Programmable Features 67 9.6 Scan features Feature/Code Selection Setting the scan mode for Push Scan {#}{4}{9}{3} {1} “VIEWER” (default): The scanned image will be displayed in the [Multi- Function Viewer] window. {2} “FILE”: The scanned...

[Page 68] Panasonic KX-FLB883FX

9. Programmable Features 68 9.7 LAN features Feature/Code Selection LAN setting with a DHCP server {#}{5}{0}{0} {0} “DISABLED”: Deactivates this feature. {1} “ENABLED” (default): The following will be allocated automatically using a DHCP (D...

[Page 69] Panasonic KX-FLB883FX

9. Programmable Features 69 Setting HTTPD for the LAN connection {#}{5}{3}{4} {0} “DISABLED”: Denies access to the web browser. {1} “ENABLED” (default): Allows access to the web browser. Feature/Code Selection FLB883FX-PFQX2770ZA-OI-en.book ...

[Page 70] Panasonic KX-FLB883FX

9. Programmable Features 70 9.8 Network features (LAN connection only) These features can be programmed only by using the web browser. Note: L See the following sections for details on these related features: – Change password (feature #155 on page...

[Page 71] Panasonic KX-FLB883FX

10. Useful Information 71 10 Useful InformationUseful In for matio n 10.1 Character entry The dial keypad is used to enter characters and numbers. –Press {<} or {>} to move the cursor. – Press dial keys to enter characters and numbers. –...

[Page 72] Panasonic KX-FLB883FX

10. Useful Information 72 10.2 Status of the unit 10.2.1 Using Remote Control You can easily operate the following functions from your computer. – Programming the features (page 58) – Storing, editing or erasing items in directories (page 42) �...

[Page 73] Panasonic KX-FLB883FX

10. Useful Information 73 For Windows XP Home: [Control Panel] i [Printers and Other Hardware] i [Printers and Faxes] For Windows Vista: [Control Panel] i [Printers] 3 Select the unit’s name. 4 Select [Properties] from the [File] or [Organize] me...

[Page 74] Panasonic KX-FLB883FX

11. Help 74 11 HelpError Messages 11.1 Error messages – Reports If a problem occurs during fax transmission or reception, one of the following messages will be printed on the sending and journal reports (page 45). Message Code Cause & Solution...

[Page 75] Panasonic KX-FLB883FX

11. Help 75 11.2 Error messages – Display If the unit detects a problem, one or more of the following messages will appear on the display. Display Cause & Solution “CALL SERVICE” L There is something wrong with the unit. Contact our service...

[Page 76] Panasonic KX-FLB883FX

11. Help 76 “OUT OF PAPER INPUT TRAY #1” L Recording paper is not installed or the input tray has run out of paper. Install paper (page 17, 31). L Recording paper is not fed into the unit properly. Reinstall paper (page 17, 31). L The paper in...

[Page 77] Panasonic KX-FLB883FX

11. Help 77 Troubleshooting 11.3 When a function does not work 11.3.1 General Problem Cause & Solution The unit does not work. L Check the connections (page 20, 28). The output tray becomes full quickly or the recording paper does not stack pro...

[Page 78] Panasonic KX-FLB883FX

11. Help 78 11.3.2 Printing problems 11.3.3 Scanner Problem Cause & Solution The printing quality is poor. L Some paper has instructions recommending which side to print on. Try turning the recording paper over. L You may have used paper with a ...

[Page 79] Panasonic KX-FLB883FX

11. Help 79 11.3.4 Copier 11.3.5 Fax The name of the desired computer will not be displayed on the unit when scanning documents from the unit (LAN connection only). L The printer driver has not been installed. Install it on your computer (page ...

[Page 80] Panasonic KX-FLB883FX

11. Help 80 The other party complains that received documents are too dark and cannot be read. L You used a coloured paper as a document. Change the contrast (page 37) and make a lighter copy of the document, using “TEXT” resolution (page 37)...

[Page 81] Panasonic KX-FLB883FX

11. Help 81 I cannot hear a dial tone. L The telephone line cord is connected to the [EXT] jack on the unit. Connect to the [LINE] jack (page 20). L If you use a splitter/coupler to connect the unit, remove the splitter/coupler and connect the unit...

[Page 82] Panasonic KX-FLB883FX

11. Help 82 11.3.6 Network Problem Cause & Solution I cannot operate the following functions. – PC printing – Scanning – Remote Control – PC FAX – Device Monitor L Confirm the LED via the LAN port of the main board. If the LED is glowi...

[Page 83] Panasonic KX-FLB883FX

11. Help 83 11.3.7 Using an answering machine 11.3.8 If a power failure occurs L The unit will not function. L If any documents are stored in the memory (i.e. during copy, PC printing, fax transmission or fax reception), they will be lost. L The uni...

[Page 84] Panasonic KX-FLB883FX

11. Help 84 L If the [Select Language] dialogue box appears, select the desired language that you want to use with this software. Click [OK]. 2 [Tools] i [Windows Firewall Setting] L The [Windows Firewall Setting Tool] window will appear. 3 [Add to ...

[Page 85] Panasonic KX-FLB883FX

12. Paper Jams 85 12 Paper JamsJams 12.1 Recording paper jam 12.1.1 When the recording paper has jammed inside of the unit The display will show the following. PAPER JAMMED b OPEN TOP COVER Caution: L Do not pull out the jammed paper forcibly before...

[Page 86] Panasonic KX-FLB883FX

12. Paper Jams 86 Case 1: When the recording paper has jammed near the drum and toner unit: 1. Pull the paper input tray completely out. 2. Remove the jammed paper (1) carefully by pulling it upwards. Remove the jammed paper (1) carefully by pullin...

[Page 87] Panasonic KX-FLB883FX

12. Paper Jams 87 Case 3: When the recording paper has jammed near the output tray: 1. Pull and hold the lever (1) to release the jammed paper. 2. Remove the jammed paper (1) carefully by pulling it upwards. 3. Close the top cover until locked. 12...

[Page 88] Panasonic KX-FLB883FX

12. Paper Jams 88 12.1.3 When the recording paper in the manual input tray is not fed into the unit properly The display will show the following. CHECK PICK UP INPUT TRAY #2 1 Remove the recording paper. 2 Re-insert the recording paper. Note: L If ...

[Page 89] Panasonic KX-FLB883FX

12. Paper Jams 89 When the document has jammed near the document exit: Press the ADF cover release button (1) and open the middle part (2) of the ADF cover. Remove the jammed document (3) carefully. 3 Close the ADF cover. 1 3 2 FLB883FX-PFQX2770ZA-...

[Page 90] Panasonic KX-FLB883FX

13. Cleaning 90 13 Clean ingCleaning 13.1 Cleaning the white plates and glass Clean the white plates and glass when a black line, a white line or a dirty pattern appears on: – your recording paper, – the original document, – the scanned data,...

[Page 91] Panasonic KX-FLB883FX

13. Cleaning 91 6 Close the document cover (1). 7 Re-connect the power cord. If the document cover comes off from the unit 1. Attach the hinges (1) to the document cover (2). L Make sure that the inserted direction is correct. Otherwise, the hinges ...

[Page 92] Panasonic KX-FLB883FX

13. Cleaning 92 13.1.2 Lower glass 1 Disconnect the power cord. 2 Lift the top cover release lever (1) and open the top cover (2). Important: L Close the manual input tray (3) before opening the top cover. Note: L Do not touch the transfer roller (...

[Page 93] Panasonic KX-FLB883FX

13. Cleaning 93 6 Close the top cover until locked. Caution: L To prevent injuries, be careful not to put your hands under the top cover. 7 Re-connect the power cord. 13.2 Cleaning the document feeder rollers Clean the rollers when the document fre...

[Page 94] Panasonic KX-FLB883FX

13. Cleaning 94 4 Clean the document feeder rollers (1) with a cloth moistened with isopropyl rubbing alcohol, and let all parts dry thoroughly. L Clean the rollers in the direction of the arrow to avoid the discharge brush (2) from being pulled. ...

[Page 95] Panasonic KX-FLB883FX

14. General Information 95 14 G en era l Inform at ionPrinted Reports 14.1 Reference lists and reports You can print out the following lists and reports for your reference. – “SETUP LIST” – “TEL NO. LIST” – “JOURNAL REPORT” – “...

[Page 96] Panasonic KX-FLB883FX

14. General Information 96 ITU-T No.1 Test Chart Note: L Design and specifications are subject to change without notice. L The pictures and illustrations in these instructions may vary slightly from the actual product. L The accuracy of the clock i...

[Page 97] Panasonic KX-FLB883FX

14. General Information 97 Toner life Toner life depends on the amount of content in a received, copied or printed document. The following is the approximate relationship between image area and toner life for replacement toner cartridge (Model No....

[Page 98] Panasonic KX-FLB883FX

14. General Information 98 Copyrights 14.3 Information of copyrights and licences L This product uses a part of NetBSD kernel. The use of a part of NetBSD kernel is based on the typical BSD style licence below. However, parts of the NetBSD Kernel ar...

[Page 99] Panasonic KX-FLB883FX

14. General Information 99 Copyright (c) 1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1982, 1986, 1990, 1993 The Regents of the University of California. All rights reserved. Copyright ...

[Page 100] Panasonic KX-FLB883FX

14. General Information 100 Parts of the NetBSD Kernel are provided with the licences that are slightly different from the above Berkeley-formed licence. Please refer the source code of the NetBSD Kernel about the details. The source code of the Net...