Panasonic KX-T7400 Series User Manual Addendum

[Page 1] Panasonic KX-T7400 Series

Digital Super Hybrid System This manual provides a special information about the KX-T7400 Series and other added and changed features. Please refer to this along with the KX-TD208E Operating Instructions. The last letter “E” or “E-B”of each m...

[Page 2] Panasonic KX-T7400 Series

2 Contents User Manual Addendum for KX-T7400 Series Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

[Page 3] Panasonic KX-T7400 Series

3 Contents Section 3. System Programming [205] DTMF Sending PAUSE Time . . . . . . . . . . . . . . . . . . . . . . . . . 42 [517] Call Forwarding by ISDN Service . . . . . . . . . . . . . . . . . . . . . . 42 [614]-[615] Doorphone Call Forwarding ...

[Page 4] Panasonic KX-T7400 Series

4 Configuration Location of Controls ■ KX-T7431: Digital Proprietary Telephone LCD (Liquid Crystal Display) With 16-character/1-line readout: Shows the date, time, dialed number or name, call duration time, etc. It also shows the messages ...

[Page 5] Panasonic KX-T7400 Series

5 Configuration LCD (Liquid Crystal Display) With 24-character/6-line readout: Shows the date, time, dialed number or name, call duration time, etc. It also shows the messages for programming or feature access. PROGRAM button FWD/DND (Call Fo...

[Page 6] Panasonic KX-T7400 Series

6 Configuration To raise or lower the display of KX-T7433/KX-T7436: – To raise the display 1. Press the LCD ADJ button. 2. Raise the display. – To lower the display 1. Press the LCD ADJ button. 2. Lower the display. LCD ADJ button LCD 1 2 3 4 ...

[Page 7] Panasonic KX-T7400 Series

→ → 7 Configuration Connection Connect as shown. ■ KX-T7431/KX-T7433/KX-T7436/KX-T7420/KX-T7425 Connect to a standard telephone, telephone answering machine, or FAX for XDP* or parallel connections (TO TEL). The telephone line cord <Back ...

[Page 8] Panasonic KX-T7400 Series

8 Configuration Wall Mounting 1. Disconnect the handset cord first. Remove the handset hook by pulling it up. Turn it around and re-insert it. 4. Insert the stand in the centre slots. 2. Remove the attached stand. 5. Insert the included tel line co...

[Page 9] Panasonic KX-T7400 Series

9 Configuration Feature Button Descriptions ■ KX-T7431/KX-T7433/KX-T7436/KX-T7420/KX-T7425 AUTO ANSWER/MUTE button Used for intercom auto answer; or it turns the microphone off during a conversation. AUTO DIAL/STORE button Used for speed dialling ...

[Page 10] Panasonic KX-T7400 Series

10 Configuration Left (counter-clockwise) Level decreases Right (clockwise) Level increases Initial Setting The Jog Dial can be used for the display contrast and the volume control. Rotate the Jog Dial in either direction as desired. The contrast or...

[Page 11] Panasonic KX-T7400 Series

11 Configuration Changing the ringing tone of a CO button There are eight ringer frequencies available for each CO (Loop-CO, Single-CO) button. If you wish to change them, refer to the “Distinguishing the ringing tone for each CO button” in the ...

[Page 12] Panasonic KX-T7400 Series

12 Configuration While the telephone is idle and on-hook 1. Press the RING (S2) button. • The telephone will ring. 2. Rotate the Jog Dial in the desired direction. • The telephone will stop ringing in about 4 seconds. • When the volume level i...

[Page 13] Panasonic KX-T7400 Series

13 Station Programming Station Speed Dialling Number/Name Assignment Allows you to assign numbers and names that are used frequently to Function buttons on your telephone. You can store extension numbers, telephone numbers and features access numbers...

[Page 14] Panasonic KX-T7400 Series

14 Station Programming 3. Enter the name (10 characters max.). • Refer to the Combination Table on page 15 on how to enter each character. 4. Press the STORE button. • The STORE indicator lights. • The display shows the initial programming mode...

[Page 15] Panasonic KX-T7400 Series

15 Station Programming Combination Table Characters can be entered using the dial key pad, various buttons or the Jog Dial for storing names. Combination Table 1 shows the combination of keys and the number of times to press the SELECT (AUTO ANSWER/M...

[Page 16] Panasonic KX-T7400 Series

16 Station Programming Combination Table 1 Keys 012345678 1 1QqZz ! ? 22AaBbCc 3 3DdEeF f 4 4GgHh I i 55JjKkLl 6 6MmNnOo 7 7PpQqRrSs 8 8T tUuVv 9 9WwXxYyZz 00 .,’:; * / +–=<> ##$%&@() SHIFT & Soft Combination SHIFT+ SHIFT+ S2 SHIFT...

[Page 17] Panasonic KX-T7400 Series

17 Station Programming <Example> To enter “Mike”, – Using the SELECT button (With a KX-T7431/KX-T7433/KX-T7436/KX-T7235) See Combination Table 1. 1. Press 6 and then press the SELECT button once to enter “M”. 2. Press 4 and then press...

[Page 18] Panasonic KX-T7400 Series

18 Features Handset Microphone Mute Allows the KX-T7400 series telephone user to turn off the handset microphone so you can consult privately with others in the room. You will still be able to hear the other party. Setting During a conversation using...

[Page 19] Panasonic KX-T7400 Series

19 Special Display Features A Panasonic digital proprietary telephone with a large display, KX-T7431, KX-T7433 and KX-T7436, allows you to make a call or operate a feature using the display message. For operation of the features marked “*”, refe...

[Page 20] Panasonic KX-T7400 Series

20 Special Display Features List for Display Operation with a Soft button For KX-T7431, KX-T7433 and KX-T7436 2.3 Making Calls Quick Dialling Dialling with a System Speed Dialling Button (System Speed Dialling) Dialling with a Station Speed Dialling...

[Page 21] Panasonic KX-T7400 Series

21 Special Display Features Left (counter-clockwise) To the previous item Right (clockwise) To the next item Jog Dial Operation You can search for desired items by using the Jog Dial on the corresponding display menu. Rotate the Jog Dial in either di...

[Page 22] Panasonic KX-T7400 Series

22 Special Display Features 1) Call Directory Extension (Extension Dialling) You can make an intercom call using the directory. SYS Speed (System Speed Dialling) STA Speed (Station Speed Dialling) Call Log (Call Log, Outgoing) (KX-T7436 only) You can...

[Page 23] Panasonic KX-T7400 Series

23 Special Display Features ■ KX-T7431 System Speed Third display Station Speed Forth display Extension John Smith → or Station Speed Dialling System Speed Dialling Extension Dialling Second display Extension Dialling / System Speed...

[Page 24] Panasonic KX-T7400 Series

24 Special Display Features ■ KX-T7433 Third display EXT FEAT STA 1 Jan 15:00 Ann Parker Alice MENU CALL → Bob Jones Carol MENU CALL → Bob Jones Carol MENU CALL → or System Speed Dialling or Extension Speed Dialling Extension Diallin...

[Page 25] Panasonic KX-T7400 Series

25 Special Display Features ■ KX-T7436 – Using the Function button – Ronald Zaydel Adam Alice Ann Parker MENU CALL Initial display → Ann Parker Beth Bob Jones Carol Chris MENU → Ronald Zaydel Adam Alice Ann Parker MENU → Ann Parke...

[Page 26] Panasonic KX-T7400 Series

26 Special Display Features – Using the Soft button or rotating Jog Dial directly – Extension Dialling / Station Speed Dialling 1. Press the STA (S1) or EXT (S2) button. 2. Rotate the Jog Dial until the desired item is at the arrow. 3. Press the ...

[Page 27] Panasonic KX-T7400 Series

27 Special Display Features 2) System Feature Access Menu You can access the features which are displayed in alphabetical order. To access the features, you may change the display to the Jog Dial Operation display by pressing the MODE or SHIFT butto...

[Page 28] Panasonic KX-T7400 Series

28 Special Display Features KX-T7431 1. Rotate the Jog Dial until the desired item is displayed. 2. Press the SELECT button. 3. Enter the parameter, if required. KX-T7433 1. Press the FEAT (S3) button. 2. Rotate the Jog Dial until the desired item is...

[Page 29] Panasonic KX-T7400 Series

29 Special Display Features System Feature List You can access the following features which are displayed in alphabetical order. The parameters used in the list are for a telephone connected to a KX-TD208. DISPLAY (KX-T7436) DISPLAY (KX-T7431/KX-T743...

[Page 30] Panasonic KX-T7400 Series

...

[Page 31] Panasonic KX-T7400 Series

Added Features * All the buttons are based on the KX-T7200 series, although they also apply to other models (e.g., KX-T7400 series). ...

[Page 32] Panasonic KX-T7400 Series

32 2.2 Initial Settings Changing the Flexible Buttons You can change the flexible buttons on your telephone to certain function buttons. For example, your telephone has more CO buttons than available Exchange lines, so you may change unused CO butt...

[Page 33] Panasonic KX-T7400 Series

33 2.6 Others PT SLT and PT Before Leaving Your Desk By the ISDN Service – all calls By the ISDN Service – when busy By the ISDN Service – no answer Forwarding a Call (Call Forwarding) TYPE DESCRIPTION All calls to your MSN number are forwar...

[Page 34] Panasonic KX-T7400 Series

34 2.6 Others Call Type At your extension At the other party’s extension • Depending on the kind of call received, the DND setting will work differently. Rejecting Incoming Calls (Do Not Disturb (DND)) You can reject calls using the following met...

[Page 35] Panasonic KX-T7400 Series

35 2.6 Others Displaying the Caller’s Information (Caller ID) Provides you with the caller’s telephone number and name if you have subscribed to the calling line identification service. You can record the caller’s telephone number (and name if...

[Page 36] Panasonic KX-T7400 Series

36 2.6 Others * call duration Charge Display while dialling Off-hook or press SP-PHONE and dial an outside line access code + a phone number. dialled phone number dialled phone number call duration your CLIP number (Skipped if not assigned.) Units ca...

[Page 37] Panasonic KX-T7400 Series

37 2.6 Others • System Programming (Section 3.4) [107] Charge Indication Selection • ISDN Port Programming (Section 3.7) [404] CLIP / COLP Number Assignment • System Programming (See page 48 in this manual) [902] System Additional Information �...

[Page 38] Panasonic KX-T7400 Series

38 2.6 Others Any Telephone PT PT • To use the ISDN service button on a proprietary telephone, you must assign a flexible button as the ISDN service button first. • You can press a CO button instead of entering an ISDN port access code. • You...

[Page 39] Panasonic KX-T7400 Series

39 3.1 System Management To access other types of network from the ISDN, sending out DTMF may be needed. To send out the dialled number in DTMF, you must insert a PAUSE (“ ”). Any digits following the PAUSE will be sent as DTMF. Some examples ...

[Page 40] Panasonic KX-T7400 Series

40 3.1 System Management Direct Dialling In (DDI) Allows the external caller to connect to an extension in the system directly. Assignable destinations are: operator, extension, or extension group. This requires a DDI number transmitted from the ISD...

[Page 41] Panasonic KX-T7400 Series

41 3.1 System Management Forwarding a Doorphone Call SLT ✔ ISDN-T ✔ PT ✔ You can automatically transfer an incoming doorphone call to a preset outside destination. • Even if you set other Call forwarding feature, this setting is available if...

[Page 42] Panasonic KX-T7400 Series

42 3. System Programming [205][517][614]–[615] Enables or disables the Call Forwarding by ISDN Service function on a Class of Service (COS) basis. X – Selection number: 1 (Enable) / 2 (Disable) D EFAULT All COS – Disable C HANGE The Programming...

[Page 43] Panasonic KX-T7400 Series

43 3. System Programming [708][709] Determines how the dialled number should be modified before sending to the exchange line. Numbers are added to the beginning of the dialled number. • To delete the current entry, press # after entering the route...

[Page 44] Panasonic KX-T7400 Series

44 3. System Programming [902] Field Description Selection Default Reference Change [902] System Additional Information Explanation for Area 3 03 04 05 06 12 14 Selects the first information to appear on the display while receiving an incoming call ...

[Page 45] Panasonic KX-T7400 Series

45 Other added items Feature TitleSection of O/I Item 2.3 Making Calls 2.3 Making Calls 2.3 Making Calls 2.3 Making Calls Quick Dialling Dialling Simply by Pressing a Button (One-Touch Dialling) Redialling Redialling the Last Dialled Number (Last N...

[Page 46] Panasonic KX-T7400 Series

46 Other added items Section of O/I Feature Title Item 3.10 LCR Programming [701] LCR Carrier Code Please add the following to the conditions. • To delete the current entry, press # after entering the route number. 3.10 LCR Programming [702] LCR Ro...

[Page 47] Panasonic KX-T7400 Series

Changed Features ...

[Page 48] Panasonic KX-T7400 Series

48 3.1 System Management Flow Chart of LCR Is the dialled number an emergency call number? Route 1 is selected. BTL is selected. No No No No Yes Yes Yes Yes Yes Yes No Is the dialled number the BTL access code? Does the first digit match the leading...

[Page 49] Panasonic KX-T7400 Series

49 3.1 System Management 092-477-7777 The number transmitted to the network 12392-477-7777 By [708] LCR Modify Removed Digit, 1 digit is removed. By [709] LCR Modify Added Number, 123 are added. Dialled Number 92-477-7777 * For the example above, the...

[Page 50] Panasonic KX-T7400 Series

50 3.1 System Management ☞ ! ! • Emergency dial numbers are not applied to LCR and Toll Restriction. • If you dial the carrier code directly, the numbers you dial after the carrier code will not be affected by either the LCR Modify Removed Digi...

[Page 51] Panasonic KX-T7400 Series

51 3. System Programming [404][412] Assigns the Calling Line Identification Presentation (CLIP) and Connected Line Identification Presentation (COLP) numbers. You can classify both CLIP and COLP numbers into the business and private modes. * Exten...

[Page 52] Panasonic KX-T7400 Series

52 Other changed items Section of O/I Feature Title Please change the word, Toll Restriction into Call Barring on the following pages. P8-9, Contents 2.3 Making Calls (P2-12, 14) (P2-16) Outside Calling Quick Dialling 2.6 Others (P2-53...54) (P2-67.....

[Page 53] Panasonic KX-T7400 Series

53 Other changed items Feature TitleSection of O/I Item Please change the PROGRAMMING INPUT for the FUNCTION “Log-in/Log-out” from “8” into “80”. Please replace as follows in the conditions; •....Enter “ ” for a “-” (hyphen). �...

[Page 54] Panasonic KX-T7400 Series

54 Other changed items Please change the PROGRAMMING INPUT for both SLT and PT. Sets the new rate (0. XX Pound) Sets the new rate (XXXXXXXX Pound) Please change the name of the following programming address [404] Subscriber Number Assignment [404] CL...

[Page 55] Panasonic KX-T7400 Series

55 Other changed items Feature TitleSection of O/I Item Please change the condition as follows. • Up to twenty-four digits, consisting of “0 through 9” and “ ,” can be stored. Enter “ ” for a “-” (hyphen). • Up to twenty-four ...

[Page 56] Panasonic KX-T7400 Series

56 3.14 Programming Tables COLP no. (Business) Default : all All Ext. 21 22 23 24 25 26 27 28 31 32 33 34 300 or 30 301 302 303 304 305 306 307 308 Port 1 Not Stored [404] CLIP/COLP Number Assignment Port 2 Port 1 Port 2 COLP no. (Private) CLIP no. (...

[Page 57] Panasonic KX-T7400 Series

57 3.14 Programming Tables Default : all All Ext. 291 292 293 294 295 296 297 298 300 or 30 301 302 303 304 305 306 307 308 DDI no. (Port 1) Not Stored [412] ISDN DDI Number/Extension Number Transformation DDI no. (Port 2) Default : all All Ext. 21 2...

[Page 58] Panasonic KX-T7400 Series

58 3.14 Programming Tables Def. : all All exts Ext. 21 22 23 24 25 26 27 28 31 32 33 34 Def. : all All exts Ext. 21 22 23 24 25 26 27 28 31 32 33 34 <Note> 0 : immediate, 1 : 1 ring delay, 3 : 3 ring delay, 6 : 6 ring delay, 9 : disable [408] E...

[Page 59] Panasonic KX-T7400 Series

59 3.14 Programming Tables Def. : all All exts Ext. 21 22 23 24 25 26 27 28 31 32 33 34 Def. : all All exts Ext. 21 22 23 24 25 26 27 28 31 32 33 34 Def. : all All exts Ext. 21 22 23 24 25 26 27 28 31 32 33 34 <Note> 0 : immediate, 1 : 1 ring d...

[Page 60] Panasonic KX-T7400 Series

60 3.14 Programming Tables [517] Call Forwarding by ISDN Service Selection Default All COS All COS COS 1 COS 2 COS 3 COS 4 COS No. Enable ✓ Def. : all All exts Ext. 21 22 23 24 25 26 27 28 31 32 33 34 Def. : all All exts Ext. 21 22 23 24 25 26 27 ...

[Page 61] Panasonic KX-T7400 Series

61 3.14 Programming Tables [701] LCR Carrier Code Not stored Carrier code10 digits max. [708] LCR Modify Removed Digit 0 digit 0...9 digits [709] LCR Modify Added Number Not stored 0...9, 9 digits maximum Default: all Route 1 Route 2 Route 3 Route 4 ...

[Page 62] Panasonic KX-T7400 Series

62 3.14 Programming Tables [702] LCR Route Selection Code Area Code (7 digits max.) Route 1 Route 2 Route 3 Route 4 Default : All – Not Stored Area No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ...

[Page 63] Panasonic KX-T7400 Series

63 3.14 Programming Tables [702] LCR Route Selection Code Area Code (7 digits max.) Route 1 Route 2 Route 3 Route 4 Default : All – Not Stored Area No. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 ...

[Page 64] Panasonic KX-T7400 Series

64 3.14 Programming Tables [706] LCR Route Exceptional Code Area Code (7 digits max.) Route 1 Route 2 Route 3 Route 4 Default : All – Not Stored Area No. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 3...

[Page 65] Panasonic KX-T7400 Series

65 3.14 Programming Tables [706] LCR Route Exceptional Code Area Code (7 digits max.) Route 1 Route 2 Route 3 Route 4 Default : All – Not Stored Area No. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 7...

[Page 66] Panasonic KX-T7400 Series

...

[Page 67] Panasonic KX-T7400 Series

...

[Page 68] Panasonic KX-T7400 Series

Printed in Japan PSQW1270XA K0698KM2049 ...