Philips SE4502B/17 User Manual

Download or browse on-line these Operation & User’s Manual for Philips SE4502B/17 Answering Machine, Baby Accessories.

Philips SE4502B/17 Manual Information:

This manual for Philips SE4502B/17, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 65 pages, and the size of the file at download is 2.09 Mb. The document type is Operation & User’s Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Philips SE4502B/17. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Philips SE4502B/17

SE450 US-EN Telephone Warning Use only rechargeable batteries. Charge the handset for 24 hours before use. Register your product and get support at www.philips.com/welcome ...

[Page 2] Philips SE4502B/17

...

[Page 3] Philips SE4502B/17

1 Table of contents 1Important Safety Instructions 4 2 Environment and safety 6 2.1 Safety information 6 2.2 Power requirements 6 2.3 Battery requirements 6 2.4 Telephone connection 6 2.5 Environmental care 7 2.6 Precautions 7 2.7 Equipment Approval...

[Page 4] Philips SE4502B/17

2 Table of contents 8.3 Text or number entry 30 8.4 Call in progress 30 8.4.1 Adjust earpiece or speaker volume 30 8.4.2 Mute/Unmute microphone 30 8.4.3 Activate/Deactivate loudspeaker mode 30 8.5 Chain dialing 31 8.6 Using your Phonebook 31 8.6.1 ...

[Page 5] Philips SE4502B/17

3 Table of contents 10.6.1 Easy registration 46 10.7 Unregister 46 10.8 Reset Unit 46 10.9 Set Area Code 47 10.10 Set Auto Prefix 47 10.11 Change Flash time 48 10.12 Change the Dial Mode 48 10.13 Set First Ring Detection 48 10.14 Default Settings 49 ...

[Page 6] Philips SE4502B/17

4 Important Safety Instructions 1Important Safety Instructions Some of the following information may not apply to your particular product; however, when using telephone equipment, basic safety precautions should always be followed to reduce the ...

[Page 7] Philips SE4502B/17

5 Important Safety Instructions telephone line has been disconnected at the network interface. 14 Never install or modify telephone wiring during a lightning storm. 15 Never install telephone jacks in wet locations unless the jack is specificall...

[Page 8] Philips SE4502B/17

6 Environment and safety the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.) 8 When inserting battery(ies) into this product, the proper polarity or direction must be observed. Reve...

[Page 9] Philips SE4502B/17

7 Environment and safety 60950). Following a power cut, the call in progress is lost. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe syst...

[Page 10] Philips SE4502B/17

8 Environment and safety meets certain radio communications and operational requirements. 2.7 Equipment Approval Information Your telephone equipment is approved for connection to the public switched telephone network and is in compliance with p...

[Page 11] Philips SE4502B/17

9 Environment and safety temporary discontinuance of service may be required.Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such ...

[Page 12] Philips SE4502B/17

10 Important Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004...

[Page 13] Philips SE4502B/17

11 Important NOTES: This equipment may not be used on coin service provided by the telephone company. 3.1 Power requirements • This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be l...

[Page 14] Philips SE4502B/17

12 The RBRC ® seal 3.2 Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit an...

[Page 15] Philips SE4502B/17

13 The RBRC ® seal 4.1 Service Centers US service center Philips Accessories & Computer Peripherals North America1881 Route 46 WestLedgewood, NJ 07852 Phone: (800) 233-8413 E-mail support: http://www.support.philips.com/support ...

[Page 16] Philips SE4502B/17

14 Yo u r ph on e 5 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 5.1 What’s in the box In multihandset packs, you will...

[Page 17] Philips SE4502B/17

15 Yo u r ph on e 5.2 Overview of your phone AEvent LED If you have subscribed to Caller Line Identification, the event LED also blinks when there is a new call, or a new voice mail message. BEarpiece CDisplay See section 5.3 for an overview of...

[Page 18] Philips SE4502B/17

16 Yo u r ph on e I Menu key m In idle mode: Go to the main menu. J Redial key r Access the Redial list in idle mode. K Loudspeaker key l In idle mode: Turn on the loudspeaker and dial the number. Answer an incoming call using handsfree mode. Duri...

[Page 19] Philips SE4502B/17

17 Yo u r ph on e 5.3 Display icons and Messages Indicates that the battery is fully charged. This icon blinks during charge and when the battery is low. When the Icon is empty the battery is practically discharged. If Warning Batt flashes ...

[Page 20] Philips SE4502B/17

18 Yo u r ph on e 5.4 Overview of the base station APaging key a Page handset. Long press to start registration procedure. A ...

[Page 21] Philips SE4502B/17

19 Getting started 6 Getting started 6.1 Connect the base station 1 Place the base station in a central location near the telephone line socket and electricity socket. 2 Connect the line cord and the power cable to their corresponding connectors ...

[Page 22] Philips SE4502B/17

20 Getting started bracket and ➁ rotating the bracket outward. 2 Turn the bracket around. 3 Attach the bracket to the opposite side of the base station. 4 Use the pedestal wall mounting to plug your base station. 6.3 Install your phone Before us...

[Page 23] Philips SE4502B/17

21 Getting started 2 Place the batteries in the correct polarity as indicated and replace the cover. 6.3.2 Charge battery The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, th...

[Page 24] Philips SE4502B/17

22 Getting started 6.5 Install optional headset Your phone may be used with an optional headset (not included in the box). To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. 6.6 U...

[Page 25] Philips SE4502B/17

23 Getting started 6.7 Menu structure The SE450 has five menus as shown in the following table. Press the menu key m to enter menu mode. Use navigation keys n to navigate within the menus and all submenus. Press o Select to enter the next lower menu...

[Page 26] Philips SE4502B/17

24 Getting started Personal Settings Personal Set Handset Name Enter name Handset Tones Ring Volume No bar (off) One bar … Five bars Progressive Ring Tones Name of tones 1 … Name of tones 15 Key Beep On Off...

[Page 27] Philips SE4502B/17

25 Getting started Clock and Alarm Clock & Alarm Set Date/Time Enter date & time Set Format Time Format 12 Hours 24 Hours Date Format DD/MM MM/DD Alarm Off On Once On Daily Alarm Tone Melody 1 Me...

[Page 28] Philips SE4502B/17

26 Getting started Advanced Settings Advanced Set Easy Call Mode On Enter Number: Off (by default) Number Enter number Conference On (by default) Off Call Barring Enter PIN Mode On Off (by default) Number ...

[Page 29] Philips SE4502B/17

27 Getting started Network Services Netw. Services Call Forward Activate Enter Number: Deactivate Change Code Activation Prefix (enter code) Suffix (enter code) Deactivation Change Code Call Fwd Busy Activate Enter Num...

[Page 30] Philips SE4502B/17

28 Using your phone 7 Using your phone 7.1 Make a call 7.1.1 Predialling 1 Enter the number. (A maximum of 24 digits including * and # are allowed. Press c Clear to delete the last digit.) Or long press to delete all. 2 Press t. • The call is i...

[Page 31] Philips SE4502B/17

29 Using your phone 3 Press o Select. • The call is initiated. 7.1.7 Call using Direct Access Memory Press a number key 3 to 9 for more than 2 seconds to dial a stored direct access memory number. • In multihandset packs, each handset has its...

[Page 32] Philips SE4502B/17

30 Use more of your phone 8 Use more of your phone 8.1 Switch the handset off/on To switch the handset off, press and hold h in idle mode for at least 5 seconds. To switch it on, press and hold h for at least one second. 8.2 Keypad lock/unlock Pr...

[Page 33] Philips SE4502B/17

31 Use more of your phone very high level. Make sure the handset is not too close to your ear. 1 During a call, press l to activate the loudspeaker mode. 2 Press l again to return to deactivate the loudspeaker mode. 8.5 Chain dialing This feature ...

[Page 34] Philips SE4502B/17

32 Use more of your phone Instead of scrolling n to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pre...

[Page 35] Philips SE4502B/17

33 Use more of your phone 8.6.5 Delete a phonebook entry 1 Press m in idle mode. Phonebook is highlighted; press o Select. 2 Scroll n to Delete and press o Select. 3 Scroll n to select an entry to delete and press o Select. 4 Delete? is displayed...

[Page 36] Philips SE4502B/17

34 Use more of your phone 8.6.7.2 Delete Direct Access Memory 1 Press m in idle mode. Phonebook is highlighted; press o Select. 2 Scroll n to Direct Memory and press o Select. 3 Scroll n to the key you wish to delete the memory from and press o...

[Page 37] Philips SE4502B/17

35 Use more of your phone 8.7.4 Delete a redial number 1 Press r in idle mode, scroll n to select an entry and press o Menu. 2 Scroll n to Delete and press o Select. 3 Delete? is displayed on the screen. 4 Press o OK to confirm deletion. • A val...

[Page 38] Philips SE4502B/17

36 Use more of your phone The display shows the caller information. • Press c Back at any time to return to the previous menu. 8.9.1.1 To choose the format for call log display You must choose the correct format to dial the area code and number...

[Page 39] Philips SE4502B/17

37 Use more of your phone 8.9.3 Delete a call list entry 1 Press u in idle mode, and then scroll n to select an entry and select o Menu. 2 Scroll n to Delete and press o Select. 3 Delete? is displayed on the screen. 4 Press o OK to confirm deletio...

[Page 40] Philips SE4502B/17

38 Use more of your phone 2 Scroll n to the handset number you wish to transfer your external call to and press o Select. 3 Press t on the called handset to answer the internal call, where both internal callers can talk. • Intercom is establis...

[Page 41] Philips SE4502B/17

39 Use more of your phone 8.12 Clock and Alarm settings This feature allows you to set the date, time and alarm settings for your phone. 8.12.1 Set Date and Time 1 Press m in idle mode, scroll n to Clock & Alarm, and press o Select. 2 Set Dat...

[Page 42] Philips SE4502B/17

40 Personal settings • A validation tone is emitted and the screen returns to the Alarm menu. And the alarm icon is displayed. • If you select Off, a validation tone is emitted and the screen returns to the Clock & Alarm menu. The ala...

[Page 43] Philips SE4502B/17

41 Personal settings 3 Scroll n to your desired volume level. The ring tone sounds at each level. 4 Press o OK to confirm. • A validation tone is emitted and the screen returns to the Handset Tones menu. If ring volume is set to off, the icon...

[Page 44] Philips SE4502B/17

42 Personal settings 1 Press m in idle mode, scroll n to Personal Set, and press o Select. 2 Scroll n to Wallpaper and press o Select. 3 Scroll n to your desired wallpaper. The image on the display will change as you scroll. 4 Press o Select to ...

[Page 45] Philips SE4502B/17

43 Advanced settings 1 Press m in idle mode, scroll n to Personal Set, and press o Select. 2 Scroll n to Auto Hang-up and press o Select. 3 Scroll n to On or Off and press o Select to confirm. • A validation tone is emitted and the screen retu...

[Page 46] Philips SE4502B/17

44 Advanced settings 10.2 Auto Conference If activated, this feature allows another handset to join a conversation with an external call by simply pressing t. The default setting is On. 1 Press m in idle mode, scroll n to Advanced Set and press o...

[Page 47] Philips SE4502B/17

45 Advanced settings 10.4 XHD Sound XHD (extra high definition) Sound can increase voice quality when On. The default setting is On. To turn it off: 1 Press m in idle mode, scroll n to Advanced Set and press o Select. 2 Scroll n to XHD Sound and...

[Page 48] Philips SE4502B/17

46 Advanced settings By default, the PIN is 0000. 1 On the base station, press and hold a for 3 seconds. If no action is taken on the handset within 90 seconds, the registration procedure will be aborted. If this happens, repeat from Step 1. 2 On...

[Page 49] Philips SE4502B/17

47 Advanced settings 1 Press m in idle mode, scroll n to Advanced Set and press o Select . 2 Scroll n to Reset and press o Select . 3 Reset? is displayed on the screen. Press o OK to confirm. • A validation tone is emitted. • The unit ...

[Page 50] Philips SE4502B/17

48 Advanced settings • A validation tone is emitted and the screen returns to the Advanced Set menu. If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed. For numbers st...

[Page 51] Philips SE4502B/17

49 Network Service The default setting for first ring detection is On. The setting automatically switches to Off when you receive a call containing caller line identification. However, this occurs only if you do not first manually change the set...

[Page 52] Philips SE4502B/17

50 Network Service chapter may not be available in your phone. The Call Forward, Call Forward when Busy, and Call Forward when Unanswered functions require activation codes (prefix and suffix) and a deactivation code. You must get these codes f...

[Page 53] Philips SE4502B/17

51 Network Service 2 Scroll n to Call Forward and press o Select. 3 Scroll n to Change Code and press o Select. 4 Scroll n to Deactivation and press o Select. 5 Enter the deactivation code (maximum 14 digits) and press o OK. • A confirmation ...

[Page 54] Philips SE4502B/17

52 Network Service 11.2.2 Change Call Forward when Busy Deactivation Code 1 Press m in idle mode, scroll n to Netw. Services, and press o Select. 2 Scroll n to Call Fwd Busy and press o Select. 3 Scroll n to Change Code and press o Select. 4 Scr...

[Page 55] Philips SE4502B/17

53 Network Service 7 Repeat from step 5 until you are finished inputting both the prefix and suffix codes. 11.3.2 Change Call Forward when Unanswered Deactivation Code 1 Press m in idle mode, scroll n to Netw. Services, and press o Select. 2 Sc...

[Page 56] Philips SE4502B/17

54 Network Service 11.6.1 Access Info Service 1 Press m in idle mode, scroll n to Netw. Services, and press o Select. 2 Scroll n to Info and press o Select. 3 You are now at the Info menu and Call is highlighted. Press o Select to connect...

[Page 57] Philips SE4502B/17

55 Network Service will not record this call either. The Cancel call back feature enables you to deactivate the call back feature when you have activated it. 11.9.1 Call the Cancel Call Back Number 1 Press m in idle mode, scroll n to Netw. Servi...

[Page 58] Philips SE4502B/17

56 Te c h n i c a l da t a 12 Technical data Display • Color LCD with backlight • Selectable wallpaper • Selectable color theme General telephone features • Caller name & number identification • 5 standard + 10 polyphonic ringer melo...

[Page 59] Philips SE4502B/17

57 Frequently asked questions icon is not blinking during charge! • Battery is full: There is no need to charge the battery. • Bad battery contact: Adjust the handset slightly. • Dirty contact: Clean the batteries contact with a cloth mois...

[Page 60] Philips SE4502B/17

58 Frequently asked questions The handset cannot be registered to the base station! • Maximum number of handsets (8) has been reached. To register a new handset, unregister an existing handset. • Remove and replace the handset batteries. •...

[Page 61] Philips SE4502B/17

59 INDEX 14 INDEX A Access Info Service 54 Access phonebook 31 Access Redial list 34 Access the Call log 35 Access the Call Return Service 54 Activate/Deactivate loudspeaker mode 30 Activating Withhold ID 55 Adjust earpiece or speaker volume 30 Adva...

[Page 62] Philips SE4502B/17

60 INDEX Dial mode 48 Direct Access Memory 33 Direct dialling 28 Display icons and Messages 17 Display languages 41 E Easy Call 43 End a call 29 Establish a three-party conference call 38 F Frequently asked questions 56 G Getting started 19 H Handset...

[Page 63] Philips SE4502B/17

61 INDEX Set Info Service Number 54 Set the Backlight Time 42 Set the Cancel Call Back Number 55 Set the Display Contrast 42 Set the Ring Tones 41 Set the Ring Volume 40 Set the Withhold ID Code 55 Set Time Format 39 Set Voice Mail Number 53 Store a ...

[Page 64] Philips SE4502B/17

UCZZ01978UZ(0) ...

[Page 65] Philips SE4502B/17

©2008 Koninklijke Philips Electronics N.V. All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner Document order number: 3111 285 45511 (US-EN) ...