Heatilator Direct Vent Gas Appliance CNXT4236IH Installation And Operation Manual

Download or browse on-line these Owner's Manual for Heatilator Direct Vent Gas Appliance CNXT4236IH Indoor Fireplace.

Heatilator Direct Vent Gas Appliance CNXT4236IH Manual Information:

This manual for Heatilator Direct Vent Gas Appliance CNXT4236IH, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 80 pages, and the size of the file at download is 9.27 Mb. The document type is Owner's Manual.

Download Manual

Summary of Contents:

[Page 1] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 1 Model(s): CNXT4236IT CNXT4842IT CNXT4236IH CNXT4842IH CNXT4236ILT CNXT4842ILT CNXT4236ILH CNXT4842ILH Direct Vent Gas Appliance Owner’s Manual Installation and Operation Installation...

[Page 2] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/082 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________...

[Page 3] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 3 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if n...

[Page 4] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/084  = Contains updated information. 13 Finishing A. Mantel and Wall Projections 59 B. Facing Material 59 14 Appliance Setup A. Remove Glass Assembly 60 B. Remove the Shippin...

[Page 5] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 5 B. Warranty Hearth & Home Technologies LIMITED WARRANTY Hearth & Home Technologies (“HHT”) and its respective brands extends the following warranty for HHT gas, wood, pell...

[Page 6] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/086 B. Warranty (continued) This limited warranty does not extend to or include surface fi nish on the appliance or terminations, door gasketing, glass gasketing, glass discoloration, fi...

[Page 7] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 7 C. BTU Specifi cations MODELS: CNXT4236IT, CNXT4842IT, CNXT4236IH, CNXT4842IH, CNXT4236ILT, CNXT4842ILT, CNXT4236ILH, CNXT4842ILH LABORATORY: Underwriters Laboratories, Inc. (UL) ...

[Page 8] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/088 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or i...

[Page 9] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 9 Decorative Doors (not shown) Section 2.E. Fixed Glass Assembly (not shown) Section 2.F. Grate (not shown) Section 3.B. Mantel Hearth (not required) Clear Space Section 2.D. Fan Kits Se...

[Page 10] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0810 Clear space 3 ft (914 mm) in front of appliance D. Clear Space WARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a �...

[Page 11] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 11 I. Lighting Instructions (IPI) • For normal use, activate/deactivate your fi replace with the wall switch or remote control. • The IPI system may be operated with two D-cell ...

[Page 12] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0812 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fi replace off and allow it to completely cool. • Remove fi xed ...

[Page 13] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 13 Glass Cleaning Frequency: Seasonally By: Homeowner Tools Needed: Protective gloves, glass cleaner, drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with...

[Page 14] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0814 Burner Ignition and Operation Frequency: Annually By: Qualifi ed Service Technician Tools needed: Protective gloves, vacuum cleaner, whisk broom, fl ashlight, voltmeter, indexed dr...

[Page 15] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 15 Noncombustible roof flashing maintains minimum clearance around pipe (SECTION 10) Ceiling Firestop on floor of attic (SECTION 8) Vent Pipe (SECTIONS 7, 8, 10) Framing/Header (SECTI...

[Page 16] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0816 B. Design and Installation Considerations Heatilator direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust...

[Page 17] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 17 5 5 Framing and Clearances A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure...

[Page 18] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0818 Combustible flooring may be installed next to the front of the appliance. C B A 1/2 in. (13 mm) 1/2 in. (13 mm) Drywall 0 in. 30 in. (762 mm) to ceiling D 0 in. to floor 0 in. to lev...

[Page 19] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 19 Measured from top of hood (in inches) 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 6 10-1/4 11 11-3/4 12-1/2 13-1/4 14 14-3/4 15-1/2 16-1/4 17 17-3/4 18-1/2 19-1/4 20 20-3/4 30 in. mi...

[Page 20] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0820 A. Vent Termination Minimum Clearances Figure 6.1 Minimum Height From Roof To Lowest Discharge Opening Horizontal overhang 12 X 20 in. (508 mm) Lowest Discharge Opening Terminatio...

[Page 21] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 21 Dimension Descriptions A Clearance above the ground, a veranda, porch, deck or balcony - 12 in. (30 cm) minimum. * B Clearance to window or door that may be opened – 10,000 BTU...

[Page 22] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0822 Horizontal Vertical 8-1/2 in. 8-1/2 in. 12 in. On 45° runs, 1 ft (.3 m) of diagonal is equal to 8-1/2 in. (216 mm) horizontal run and 8-1/2 in. (216 mm) vertical run. A. Approved ...

[Page 23] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 23 H 1 V 1 To replace the fi rst starter elbow with two 45° elbows, refer to Figure 7.4. All other 90° elbows can be replaced with two 45° elbows. General Rules: • SUBTRACT 3 f...

[Page 24] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0824 4 ft min. (1.22 m) 25 ft max. (7.62 m) H 1 V 1 H 2 H 3 Installed Horizontally Installed Vertically H 2 Figure 7.5 Two Elbows 1. Top Vent - Horizontal Termination - (continued) Figure...

[Page 25] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 25 Figure 7.6 1. Top Vent - Horizontal Termination - (continued) Three Elbows H 1 V 1 V 2 H 2 Installed Vertically V 1 min. V 1 + V 2 max. H 1 +H 2 max. ft m ft m ft m DVP 1 0.30 2...

[Page 26] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0826 2. Top Vent - Vertical Termination No Elbow Figure 7.7 Figure 7.8 Two Elbows Note: If installing a vertical vent/ termination off the top of the appli- ance, the vertical termination...

[Page 27] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 27 Figure 7.9 2. Top Vent - Vertical Termination - (continued) Three Elbows 12 ft (3.66 m) min. 60 ft (18.29 m) max. Maximum horizontal run is 100% of vertical, but cannot exceed 26 ...

[Page 28] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0828 3. Rear Vent - Horizontal Termination Figure 7.10 Figure 7.11 No Elbow One 45° Elbow 18 in. (457 mm) max. 18 in. (457 mm) max. ...

[Page 29] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 29 3. Rear Vent - Horizontal Termination - (continued) Two Elbows Figure 7.12 Figure 7.13 Three Elbows H 2 V 1 H 1 H 2 V 1 H 3 H 1 Installed Horizontally H 1 max. V 1 min. H 1 +H 2 m...

[Page 30] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0830 4. Rear Vent - Vertical Termination One Elbow Figure 7.14 Two Elbows Figure 7.15 12 ft (3.66 m) min. 60 ft (18.29 m) max. 0 min. 6 ft (1.83 m) max. 12 ft (3.66 m) min. 60 ft (18.29 m)...

[Page 31] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 31 4. Rear Vent - Vertical Termination - (continued) Three Elbows Figure 7.16 12 ft (3.66 m) min. 60 ft (18.29 m) max. 0 min. 6 ft (1.83 m) max. Maximum horizontal run is 100% of vert...

[Page 32] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0832 F. Installing Vertical Termination Baffl e • Remove the glass (refer to Section 14.H.) to access the fi rebox and 5 in. inner fl ue. • Fold the baffl e (Figure 7.17) to an...

[Page 33] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 33 • Squeeze the open end of the bent baffl e with one hand. Insert the baffl e bent side up into the inner fl ue so that the bottom of the baffl e is above the bead on the ins...

[Page 34] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0834 B* Framing should be constructed of 2 X 4 lumber or heavier. The center of the framing hole is 1 in. (25mm) above the center of the horizontal vent pipe. A* Vent framing hole. ...

[Page 35] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 35 3 fasteners per side Ceiling firestop installed below ceiling. Ceiling firestop installed above ceiling. Install attic insula- tion shields before or after installation of vent sy...

[Page 36] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0836 Bend all tabs inward 90° to maintain clearance and prevent insulation from falling inside Insert 3 screws Bend 4 tabs inward 90° to maintain clearance D. Install Attic Insula...

[Page 37] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 37 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during installa- tion. Sheet metal edges are sharp. NOTICE: Once appliance is set up for ...

[Page 38] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0838 • Remove four screws holding outer collar to appliance top. See Figure 9.5. Remove outer collar. Figure 9.5 Outer Collar, Remove Four Screws • Remove four screws holding inner ...

[Page 39] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 39 Figure 9.11 Place Outer Collar on Rear of Appliance • Place outer collar on rear of appliance and replace four screws to hold collar in place. See Figure 9.11. Make sure insulat...

[Page 40] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0840 Figure 9.16 Cover Plate-Replace Figure 9.17 Place Cover Plate on Top of Appliance • Locate heat shield cover plate removed in the fi rst step. Place the heat shield cover plate ...

[Page 41] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 41 Nailing Tabs (both sides) B. Securing and Leveling the Appliance WARNING! Risk of Fire! Prevent contact with: • Sagging or loose insulation • Insulation backing or plastic ...

[Page 42] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0842 Lances 10 10 Installing Vent Pipe A. Assemble Pipe Sections (DVP Only) Attach Pipe to the Firebox Assembly Note: The end of the pipe sections with the lanced tabs will face to...

[Page 43] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 43 B. Assemble Vent Sections (SLP Only) To attach the fi rst vent component to the starting collars of the appliance • Attach an SLP-DVP24 adapter to the starting collar of the app...

[Page 44] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0844 C. Assemble Slip Sections WARNING! Risk of Fire or Asphyxiation! Overlap pipe sections at least 1 1/2 in. (38 mm). Secure slip sections with two screws which must not exceed 1/2 in. ...

[Page 45] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 45 E. Disassemble Vent Sections • Rotate either section (see Figure 10.11) so the seams on both pipe sections are aligned as shown in Figure 10.12. • Pull carefully to separate ...

[Page 46] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0846 G. Install Metal Roof Flashing Note: Skip to Section I if using the RF4-8. • See minimum vent heights for various pitched roofs (Figure 10.15) to determine the length of pipe to ex...

[Page 47] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 47 H. Assemble and Install Storm Collar CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during installa- tion. Sheet metal edges are sharp. ...

[Page 48] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0848 I. Install RF4-8 The RF4-8 may be used in place of the roof fl ashing and storm collar (Sections 10.H. and 10.I.) Pipe must be supported within 12 in. (305 mm) of the roofl ine u...

[Page 49] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 49 J. Installing Vertical Termination Cap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner fl ue of the pipe section while placing the ...

[Page 50] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0850 Figure 10.26 Venting through the wall Note: When using termination caps with factory-supplied heat shield attached, no additional wall shield fi restop is required on the exterio...

[Page 51] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 51 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home Techn...

[Page 52] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0852 12 12 Electrical Information A. Wiring Requirements NOTICE: This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of local ...

[Page 53] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 53 E. WSK-MLT Multifunction Wall Switch The WSK-MLT multifunctional wall switch is designed to control fl ame height, blower speed and auxilary func- tions on your gas fi replace. For...

[Page 54] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0854 Wiring the Wall Switch • Install the provided control wire from the fi replace to the switch location. (Control wire for Heatilator products is supplied with the fi replace). N...

[Page 55] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 55 F. Install the Flame Solenoid Gas Control Valve Variable Regulator Flame Control Solenoid Washer Variable Regulator Variable Regulator Washer Plunger Jam Nut Nut Screw Knob Sole...

[Page 56] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0856 H. Install the Remote Cover Plate The remote cover plate shipped in the bottom of the appliance MUST be placed over the control plate before operating the appliance. Not doing so may...

[Page 57] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 57 I. WSK-MLT Operating Instructions The ON/OFF rocker switch in the fi replace (located near the gas valve) must be in the “OFF” position for use with the WSK-MLT system. The ON...

[Page 58] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0858 Child Proof Mode To Enter Child Proof Mode: • Press the Up Arrow Button twice and Down Arrow Button once. The unit will send out three beeps and an indicator in the LCD panel will...

[Page 59] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 59 1 in. (25 mm) min. to perpendicular wall A 3-1/2 in. (89 mm) min. from fireplace opening to perpendicular wall B Mantel Leg or Perpendicular Wall Top of Appliance Drywall A B...

[Page 60] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0860 14 14 Appliance Setup A. Remove Glass Assembly See Section 12.H. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C. Clean th...

[Page 61] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 61 G. Log Assembly • Base logs have been permanently mounted on the grate assembly and should not be moved. Place the Rockwool • See Figures 14.1 and 14.4. • Place a small amou...

[Page 62] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0862 Latches (both bottom and top) Glass Assembly Closed J. Install Hood • Align back edge of hood with attachment clips and press fi rmly into place. Figure 14.8 Fixed Glass Assemb...

[Page 63] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 63 15 15 Troubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this ...

[Page 64] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0864 A. Intellifi re Ignition System (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but continues to spark, and main burner will not ignite. (If the pilot continue...

[Page 65] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 65 16 16 Reference Materials B 38 in. (965 mm) 1-1/2 in. (38 mm) 26-1/2 in. (673 mm) 2-1/2 in. (64 mm) 6 in. (152 mm) 14-3/8 in. (365 mm) Electric Access 3-5/8 in. (9...

[Page 66] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0866 B. Vent Components Diagrams Figure 16.2 DVP Vent Components Effective Height/Length DVP Pipe (see chart) Pi p e inches mm DVP4 4 102 DVP6 6 152 DVP12 12 305 DVP24 24 610 DVP3...

[Page 67] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 67 B. Vent Components Diagrams (continued) Figure 16.3 DVP Vent Components 13-1/4 in. (367 mm) 24-5/8 in. (625 mm) 27-1/2 in. (698 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5...

[Page 68] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0868 B. Vent Components Diagrams (continued) Figure 16.4 DVP Vent Components DVP-TB1 Basement Vent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451...

[Page 69] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 69 B. Vent Components Diagrams (continued) Figure 16.5 DVP Vent Components DVP-TRAP1 DVP-TRAP2 DVP-HPC1 DVP-HPC2 DVP-TRAPK1 DVP-TRAPK2 DVP-TRAP Horizontal Termination Cap 15-1/8 in...

[Page 70] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0870 B. Vent Components Diagrams (continued) Figure 16.6 DVP Vent Components 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in. (206 mm) DVP-HRC-SS 10-7/8 in. 276 mm 10-1/2 in. 267 mm...

[Page 71] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 71 B. Vent Components Diagrams (continued) Figure 16.7 SLP Series Vent Components 8-3/4 in. 222 mm 6-1/2 in. 165 mm 6-5/8 in. 168 mm 6 in. 152 mm 6-1/2 in. 165 mm 6-5/8 in. 168 m...

[Page 72] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0872 B. Vent Components Diagrams (continued) Figure 16.8 SLP Series Vent Components SL-2DVP Adapter SLK-SNKD Snorkel Termination Cap SLP-TVHW Vertical Termination Cap PVK-80 Power V...

[Page 73] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 73 Service Parts 09/08 Service Parts Diagram 36 in. Caliber NXT Series CNXT4236IT, CNXT4236IH Part number list on following page. Log Set Assembly 3 1 6 2 5 4 8 10 11 12 16 28 20 22 19 ...

[Page 74] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0874 Service Parts 09/08 Service Parts Diagram and List 36 in. Caliber NXT Series CNXT4236IT, CNXT4236IH Beginning Manufacturing Date: Jan 2006 Ending Manufacturing Date: Active 1 4 2 3 5...

[Page 75] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 75 Service Parts 09/08 IMPORTANT: THIS IS DATED INFORMATION. When requesting service or replacement parts for your appliance please provide model number and serial number. All parts lis...

[Page 76] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0876 C. Service Parts (continued) Service Parts 06/08 Service Parts Diagram 42 in. Caliber NXT Series CNXT4842 SERIES Beginning Manufacturing Date: N/A Ending Manufacturing Date: Active 8 ...

[Page 77] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 77 C. Service Parts (continued) Service Parts 06/08 Service Parts Diagram 42 in. Caliber NXT Series CNXT4842 SERIES Beginning Manufacturing Date: N/A Ending Manufacturing Date: Active T...

[Page 78] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0878 C. Service Parts (continued) Service Parts 06/08 Service Parts List 42 in. Caliber NXT Series CNXT4842 SERIES Beginning Manufacturing Date: N/A Ending Manufacturing Date: Active # Desc...

[Page 79] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 79 D. Optional Components Arts & Crafts Faux Front FFCAC Modernist Faux Front FFCM Jamestown Faux Front FFCJ WTBC36D 36 in. Weathered Brick Refractory Liner Kit WTBC42D 42 in. Weathe...

[Page 80] Heatilator Direct Vent Gas Appliance CNXT4236IH

Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/0880 E. Contact Information Please contact your Heatilator dealer with any questions or concerns. For the location of your nearest Heatilator dealer, please visit www.heatilator.com. - NO...