Honeywell Electronic Programmable Thermostat Owner's Manual

Download or browse on-line these Owner's Manual for Honeywell Electronic Programmable Thermostat Thermostat.

Honeywell Electronic Programmable Thermostat Manual Information:

This manual for Honeywell Electronic Programmable Thermostat, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 20 pages, and the size of the file at download is 0.05 Mb. The document type is Owner's Manual.

Download Manual

Summary of Contents:

[Page 1] Honeywell Electronic Programmable Thermostat

69-0862—21 J.S. • Rev. 5-96 Electronic Programmable Thermostat Owner’s Manual 69-0862-2 ...

[Page 2] Honeywell Electronic Programmable Thermostat

69-0862—22 Table of Contents Programming Your Thermostat .................................................................................................. 3 Program Schedule.............................................................................

[Page 3] Honeywell Electronic Programmable Thermostat

69-0862—23 Programming Your Thermostat When batteries are installed, your thermostat can be programmed in your hand before it is installed or after it is mounted on the wall. For instructions on installing or replacing the batteries, refer to the M...

[Page 4] Honeywell Electronic Programmable Thermostat

69-0862—24 RETURN is the time the thermostat turns on the heating/cooling equipment after an energy saving period. When deciding what time to set for your RETURN period, include extra lead time, depend- ing on the outside temperature and your furna...

[Page 5] Honeywell Electronic Programmable Thermostat

69-0862—25 Program Schedule HEATING PROGRAM SCHEDULE Weekdays Start Time Heating Temperature Cooling Temperature WAKE __________ ____________________ ____________________ LEAVE __________ ____________________ ____________________ RETURN __________ ...

[Page 6] Honeywell Electronic Programmable Thermostat

69-0862—26 IMPORTANT Batteries are required for operation and programming. When inserting batteries, set the system switch to OFF. Remove the battery door (on the thermostat left side) using a coin at the bottom. See Maintaining Your Thermostat sec...

[Page 7] Honeywell Electronic Programmable Thermostat

69-0862—27 Press Set Schedule key until WAKE, SA SU and SET appear on the display. Use Time keys to program WAKE time and Temp keys to program WAKE temperature for Sat-Sun. Repeat the sequence for SLEEP. COOLING PROGRAM With system switch at COOL, ...

[Page 8] Honeywell Electronic Programmable Thermostat

69-0862—28 Check Current Temperature Setting—Press Run Program key once. If using TEMPORARY CHANGE or HOLD features, pressing this key cancels your change. Check Programs—Press Set Schedule key repeatedly to see each time and temperature. Press...

[Page 9] Honeywell Electronic Programmable Thermostat

69-0862—29 SETTING FAN SWITCH Fan switching positions are: FAN AUTO: Normal setting for most homes. A single-speed fan turns on automatically with the air conditioner or furnace. A two-speed fan usually runs on high with the air conditioner and run...

[Page 10] Honeywell Electronic Programmable Thermostat

69-0862—210 Maintaining Your Thermostat INSTALLING BATTERIES IMPORTANT Batteries must be installed for programming and operation of the thermostat and heat- ing/cooling system. 1. Purchase two AA alkaline batteries; nonalkaline batteries do not las...

[Page 11] Honeywell Electronic Programmable Thermostat

69-0862—211 If the batteries are not replaced sometime during the flashing bAt Lo, the indicator eventually stops flashing. bAt Lo stays on without flashing, indicating the thermostat and heating/cooling system stopped working and the batteries...

[Page 12] Honeywell Electronic Programmable Thermostat

69-0862—212 Troubleshooting Guide I F… THEN… Display will not come on. ■ Set the system switch to OFF. Remove batteries. Insert backward for at least five seconds to reset thermostat. Correctly replace batteries. Display should come on. ■ M...

[Page 13] Honeywell Electronic Programmable Thermostat

69-0862—213 Heating will not come on. ■ Check the system fuse or circuit breaker and replace or (Continued) reset, if necessary. ■ If display is blank or displays bAt Lo, install fresh batteries. ■ If temperature setting is higher than cu...

[Page 14] Honeywell Electronic Programmable Thermostat

69-0862—214 Cooling will not come on. ■ If temperature setting is lower than current temperature, (Continued) and SYSTEM ON indicator is lit, move system switch from COOL to OFF for ten minutes. After ten minutes, return switch to the COOL positi...

[Page 15] Honeywell Electronic Programmable Thermostat

69-0862—215 Thermostat current ■ Check that the wiring hole in the wall behind the temperature setting does not wallplate was plugged with insulation to prevent match the display temperature drafts that might adversely affect thermostat operation...

[Page 16] Honeywell Electronic Programmable Thermostat

69-0862—216 NOTICE This equipment is a Class B digital apparatus, which complies with Canadian Radio Interference Regulations, CRC c.1374. ...

[Page 17] Honeywell Electronic Programmable Thermostat

69-0862—217 ...

[Page 18] Honeywell Electronic Programmable Thermostat

69-0862—218 ...

[Page 19] Honeywell Electronic Programmable Thermostat

69-0862—219 Limited One-Year Warranty Honeywell warrants this product to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If, at any time dur...

[Page 20] Honeywell Electronic Programmable Thermostat

69-0862—220 Printed in U.S.A. Printed on recycled paper containing at least 10% post-consumer paper fibers. ...