Hunter 28679 Owner's Manual

[Page 1] Hunter 28679

Type 2 ModelsType 2 ModelsType 2 Models Form# 42439-01 20100615 ©2010 Hunter Fan Co. For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________...

[Page 2] Hunter 28679

2 42439-01 • 06/15/10 • Hunter Fan Company © 2010 Hunter Fan Company Welcome Your new Hunter ® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. is installation and operation m...

[Page 3] Hunter 28679

3 42439-01 • 06/15/10 • Hunter Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structu...

[Page 4] Hunter 28679

4 42439-01 • 06/15/10 • Hunter Fan Company Preparing the Fan Site (continued) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electr...

[Page 5] Hunter 28679

5 42439-01 • 06/15/10 • Hunter Fan Company Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease...

[Page 6] Hunter 28679

6 42439-01 • 06/15/10 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect el...

[Page 7] Hunter 28679

7 42439-01 • 06/15/10 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you ca...

[Page 8] Hunter 28679

8 42439-01 • 06/15/10 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. Insert the downrod through t...

[Page 9] Hunter 28679

9 42439-01 • 06/15/10 • Hunter Fan Company All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select a...

[Page 10] Hunter 28679

10 42439-01 • 06/15/10 • Hunter Fan Company WARNING: Failure to complete the following steps could cause the fan to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. 5-1. Rotate the hanger ball so...

[Page 11] Hunter 28679

11 42439-01 • 06/15/10 • Hunter Fan Company 11 Our exclusive Easy Lock™ blade assembly enables you to lock the blades in place without tools. 6-1. Align the holes in the blade with the blade iron. 6-.2 Push the blade down onto the three ...

[Page 12] Hunter 28679

12 42439-01 • 06/15/10 • Hunter Fan Company Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed t...

[Page 13] Hunter 28679

13 42439-01 • 06/15/10 • Hunter Fan Company 7 • Completing Your Installation With a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-6. Install candelabra bulbs (60 Watt Maximum) into the sockets. 7-7. read the light and fan ...

[Page 14] Hunter 28679

14 42439-01 • 06/15/10 • Hunter Fan Company In warm weather, use downward air flow pattern In cold weather, use upward air flow pattern 8-1. Turn on electrical power to the fan. 8-2. e fan pull chain controls power to the fan. e p...

[Page 15] Hunter 28679

15 42439-01 • 06/15/10 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug con...