Husqvarna 250 R Operators Manual

Download or browse on-line these Operator's Manual for Husqvarna 250R Chainsaw, Drill.

Husqvarna 250R Manual Information:

This manual for Husqvarna 250R, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 48 pages, and the size of the file at download is . The document type is Operator's Manual.

Download Manual

This sample of Husqvarna 250R Manual is aimed at the following devices list: 240 L, 250R, T 250, 240F

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Husqvarna 250R. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Husqvarna 250R

EE EE nn nn gg gg ll ll ii ii ss ss hh hh 240F 240R 250R 252RX 265RX Oper ator’s manual (EPA) Please r ead the operator’s manual carefully and make sure you understand the instructions before using the machine. ...

[Page 2] Husqvarna 250R

2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important t...

[Page 3] Husqvarna 250R

English – 3 CONTENTS Contents Note the f ollowing before starting: • Please read the operator’s manual carefully. Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroa...

[Page 4] Husqvarna 250R

4 – English INTR ODUCTION Dear customer! Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory o...

[Page 5] Husqvarna 250R

English – 5 WHA T IS WHA T? What is what on the c learing saw? (240R) 4 19 1 17 18 16 28 27 4 3 2 5 6 9 8 7 15 22 19 23 25 26 21 24 29 4 1 1 Blade 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guard 5 ...

[Page 6] Husqvarna 250R

6 – English WHA T IS WHA T? What is what on the c learing saw? (240F) 16 17 1 4 18 20 21 23 19 22 13 11 12 14 10 9 8 7 15 3 2 5 6 27 26 25 4 24 1 Blade 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment guar...

[Page 7] Husqvarna 250R

English – 7 WHA T IS WHA T? What is what on the c learing saw? (250R) 29 23 25 26 24 21 4 1 18 1 3 2 6 8 9 7 4 5 16 10 11 12 15 14 13 22 19 20 28 17 27 1 Blade 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachm...

[Page 8] Husqvarna 250R

8 – English WHA T IS WHA T? What is what on the c learing saw? (252RX) 22 25 23 4 1 18 17 27 20 1 3 2 4 8 9 7 5 16 10 11 12 15 14 13 24 21 19 6 26 1 Blade 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment g...

[Page 9] Husqvarna 250R

English – 9 WHA T IS WHA T? What is what on the c learing saw? (265RX) 24 25 23 27 20 21 4 19 17 18 1 22 12 13 11 15 14 10 9 8 5 3 1 2 6 16 7 26 4 1 Blade 2 Grease filler cap, bevel gear 3 Bevel gear 4 Cutting attachment g...

[Page 10] Husqvarna 250R

10 – English GENERAL SAFETY PRECA UTIONS Impor tant Personal protective equipment HELMET A helmet should be worn if the trees being cleared are taller than 2 m. HEARING PROTECTION Wear hearing protection that provides adequate nois...

[Page 11] Husqvarna 250R

English – 11 GENERAL SAFETY PRECAUTIONS Machine′′ ′′ s safety equipment This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See t...

[Page 12] Husqvarna 250R

12 – English GENERAL SAFETY PRECAUTIONS Cutting attachment guard This guard is intended to prevent loose objects from being thrown towards the operator. The guard also protects the operator from accidental contact with the cutting attachment. Che...

[Page 13] Husqvarna 250R

English – 13 GENERAL SAFETY PRECAUTIONS Never use a machine that has a faulty muffler. Regularly check that the muffler is securely attached to the machine. If the muffler on your machine is fitted with a spark arrestor mesh this must be clea...

[Page 14] Husqvarna 250R

14 – English GENERAL SAFETY PRECAUTIONS Cutting equipment This section describes how to choose and maintain your cutting equipment in order to: • Reduce the risk of blade thrust. • Obtain maximum cutting performance. • Extend the life of cut...

[Page 15] Husqvarna 250R

English – 15 GENERAL SAFETY PRECAUTIONS Sharpening the saw blade • See the cutting attachment packaging for correct sharpening instructions. A correctly sharpened blade is essential for working efficiently and to avoid unnecessary wear to the ...

[Page 16] Husqvarna 250R

16 – English ASSEMBLY Assembling the handlebar and throttle (240R, 250R) • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar, (see diagram). • Align the screw hole in the t...

[Page 17] Husqvarna 250R

English – 17 ASSEMBLY Transport position, handlebar (240R, 240F, 250R, 252RX) • The handlebar can easily be turned to fit along the shaft for easier transportation and storage. • Loosen the knob. Turn the handlebar clockwise so that the thr...

[Page 18] Husqvarna 250R

18 – English ASSEMBLY Fitting a blade guard, grass blade and grass cutter • The blade guard (A) is fitted using 4 screws (L) and the support plate (M) as shown. CAUTION! Always use the recommended guard for the cutting attachment you are usin...

[Page 19] Husqvarna 250R

English – 19 ASSEMBLY Fitting the trimmer guard and trimmer head Trimmy SII • Fit the correct trimmer guard (A) for use with the trimmer head. Secure the trimmer guard using the 4 screws (L) and the support plate (M) as shown. • Fit the driv...

[Page 20] Husqvarna 250R

20 – English ASSEMBLY Adjusting the harness and clearing saw Standard harness Safety release At the front is an easily accessible, quick release. Use this if the engine catches fire or in any other emergency situation that requires you to free ...

[Page 21] Husqvarna 250R

English – 21 ASSEMBLY Adjusting the harness 1 Tighten the hip strap so that it sits securely. 2 Tighten the chest strap under your left arm so that it fits closely around your body. 3 Adjust the shoulder strap to distribute the load evenly acros...

[Page 22] Husqvarna 250R

22 – English FUEL HANDLING Fuel safety Never start the machine: 1 If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. 2 If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part ...

[Page 23] Husqvarna 250R

English – 23 FUEL HANDLING Mixing • Always mix the gasoline and oil in a clean container intended for fuel. • Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixtur...

[Page 24] Husqvarna 250R

24 – English STARTING AND STOPPING Check before starting • Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been form...

[Page 25] Husqvarna 250R

English – 25 STARTING AND STOPPING Starting Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (th...

[Page 26] Husqvarna 250R

26 – English WORKING TECHNIQUES General working instructions Basic safety rules 1 Look around you: • To ensure that people, animals or other things cannot affect your control of the machine. • To ensure that people, animals, etc., do not come ...

[Page 27] Husqvarna 250R

English – 27 WORKING TECHNIQUES Working methods • Before you start clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc. • Start at whichever end of the area is easiest, and cl...

[Page 28] Husqvarna 250R

28 – English WORKING TECHNIQUES • To fell a tree forwards, the bottom of the tree should be pulled backwards. Pull the blade backwards with a quick, firm movement. • Large stems must be cut from two sides. First determine which direction th...

[Page 29] Husqvarna 250R

English – 29 WORKING TECHNIQUES Grass trimming with a trimmer head Trimming • Hold the trimmer head just above the ground at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Never press the cord into th...

[Page 30] Husqvarna 250R

30 – English MAINTENANCE Carburetor Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. To ensure that it continues t...

[Page 31] Husqvarna 250R

English – 31 MAINTENANCE Low speed jet L (240R, 240F, 250R, 252RX) Try to find the highest idling speed, turning the low speed needle L clockwise respectively counter-clockwise. When the highest speed has been found, turn the low speed needle L ...

[Page 32] Husqvarna 250R

32 – English MAINTENANCE 265RX The machine is equipped with fixed L and H-needles, in order to ensure that the machine always receives the correct mixture of fuel and air. When the engine lacks power or accelerates poorly, proceed as follows: �...

[Page 33] Husqvarna 250R

English – 33 MAINTENANCE Air filter The air filter must be regularly cleaned to remove dust and dirt in order to avoid: • Carburettor malfunctions • Starting problems • Loss of engine power • Unnecessary wear to engine parts • Excessiv...

[Page 34] Husqvarna 250R

34 – English MAINTENANCE Spark plug The spark plug condition is influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the sp...

[Page 35] Husqvarna 250R

English – 35 MAINTENANCE Maintenance schedule The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service wo...

[Page 36] Husqvarna 250R

36 – English TECHNICAL DATA Technical data Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 ma...

[Page 37] Husqvarna 250R

English – 37 TECHNICAL DATA Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed. NOTE!...

[Page 38] Husqvarna 250R

38 – English TECHNICAL DATA Approved accessories 240R, 240F Type Cutting attachment guard, Art. no. Centre hole in blades/cutters, Ø 20 mm Output shaft thread M12 Grass blade/grass cutter Multi 255-3 (Ø 255 3 teeth) 502 26 34-01 Multi 275-4 (Ø 2...

[Page 39] Husqvarna 250R

English – 39 FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The EPA (The US Environmental Protection Agency), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control sys...

[Page 40] Husqvarna 250R

...

[Page 41] Husqvarna 250R

...

[Page 42] Husqvarna 250R

1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" Trimmy SII ...

[Page 43] Husqvarna 250R

...

[Page 44] Husqvarna 250R

2,7-3,3 mm .106-.130" 15 cm 6" 15 cm 6" 15 cm 6" 15 cm 6" 1 2 3 5 6 7 10 11 1.) 2.) >1,1 Kw <1,1 Kw 2,7 mm - 9,0 m 3,0 mm - 7,5 m 3,3 mm - 6,0 m 4 8 Auto 55 ...

[Page 45] Husqvarna 250R

...

[Page 46] Husqvarna 250R

´®z+R9e¶5f¨ ´®z+R9e¶5f¨ ...

[Page 47] Husqvarna 250R

...

[Page 48] Husqvarna 250R

´®z+R9e¶5f¨ 2006-06-29 ´®z+R9e¶5f¨ 1150256-95 ...