Husqvarna 326HS75 Operator's Manual

[Page 1] Husqvarna 326HS75

Operator's manual (CARB II, EPA II) 326HS75 X-series 326HS99 X-series Please read these instructions carefully and make sure you understand them before using the machine. English ...

[Page 2] Husqvarna 326HS75

2 – English SYMBOL EXPLANATION WARNING! The hedge trimmer can be dangerous! Careless or incorrect use can result in serious, even fatal injury. Symbols • This product is in accordance with applicable CE directives. • Always wear approved protec...

[Page 3] Husqvarna 326HS75

English – 3 List of contents SYMBOL EXPLANATION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRU...

[Page 4] Husqvarna 326HS75

4 – English 3. Hand guard The hand guard (D) prevents the operator’s hands from coming into contact with the blades. For example, if the operator should loose his grip on the front handle. The machine’s protective equipment This section describ...

[Page 5] Husqvarna 326HS75

English – 5 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibration- free and comfortable use as possible. The hedge trimmer’s vibra- tion damping system reduces the transf...

[Page 6] Husqvarna 326HS75

6 – English SAFETY INSTRUCTIONS WARNING! Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your servic...

[Page 7] Husqvarna 326HS75

English – 7 SAFETY INSTRUCTIONS 5. Muffler • Never use a machine that has a defective muffler. • Check regularly that the muffler is secure. • If your muffler is fitted with a spark arrest screen then it should be cleaned regularly. A blocked...

[Page 8] Husqvarna 326HS75

8 – English IMPORTANT INFORMATION • The machine is only designed for cutting branches and twigs. • Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement o...

[Page 9] Husqvarna 326HS75

English – 9 SAFETY INSTRUCTIONS Safety instructions when using the hedge trimmer ! Protective instructions while working • Always ensure you have a safe and firm working position. • Always use both hands to hold the machine. Hold the machine in...

[Page 10] Husqvarna 326HS75

10 – English Basic working techniques • When cutting the sides of a hedge, work from the bottom upwards. When cutting horizontally, work from right to left. • Adjust the throttle setting to suit the load. • When trimming a hedge the engine sh...

[Page 11] Husqvarna 326HS75

English – 11 WHAT IS WHAT? 11. Air purge 12. Choke 13. Throttle trigger lock 14. Throttle trigger 15. Stop switch 16. Air filter cover 17. Spark plug spanner 18. Allen key 19. Blade cover (Transport) 20. Catcher (accessory) What is what on the hedg...

[Page 12] Husqvarna 326HS75

12 – English FUEL HANDLING Fuel mixture • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. WARNING! Always provide good ventilati...

[Page 13] Husqvarna 326HS75

English – 13 Warm engine IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position and then back again to its original position (B) In this way only the start throttle is applied with no choke. AIR PURG...

[Page 14] Husqvarna 326HS75

14 – English MAINTENANCE Carburetor Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in. To ensure that your unit is at ...

[Page 15] Husqvarna 326HS75

English – 15 MAINTENANCE Adjust the idling speed with the screw T, if it is necessary to readjust. First turn the idle speed adjusting screw T clockwise until the blades start moving. Then turn the screw anti-clockwise until the blades stop. The id...

[Page 16] Husqvarna 326HS75

16 – English MAINTENANCE Cooling system To maintain as low opera- ting temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. C...

[Page 17] Husqvarna 326HS75

English – 17 MAINTENANCE Air filter The air filter (A) should be cleaned regularly removing dust and dirt to avoid: • carburetor malfunction • starting problems • reduced engine power • unnecessary wear to engine parts • abnormal fuel con...

[Page 18] Husqvarna 326HS75

18 – English Maintenance schedule Below you will find some general maintenance instructions. Daily maintenance • Check throttle trigger and throttle trigger lockout function. • Check stop switch function. • Check that the blades do not rotate...

[Page 19] Husqvarna 326HS75

English – 19 326HS75 1,50/24,5 1,34/34 1,06/27 2 700 11 000 0,9 kW / 9 000 rpm Yes Yes Walbro MB Champion RCJ 6Y 0,02/0,5 Zama C1Q 1,06/0,5 12,3/5,6 96 3,3/3,6 7,1/6,2 720 4 695 Technical data Engine Displacement, cu in/cm 3 Cylinder bore, inch/mm ...

[Page 20] Husqvarna 326HS75

20 – English WHAT IS COVERED REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Husqvarna Forest & Garden servicing dealer. If you have any questions regarding y...

[Page 21] Husqvarna 326HS75

English – 21 ...

[Page 22] Husqvarna 326HS75

´+H![¶33¨ ...

[Page 23] Husqvarna 326HS75

English – 23 ...

[Page 24] Husqvarna 326HS75

2002W01 ´+H![¶33¨ 114 00 15-93 ...