HUSQVARNA K 3000 Operator's Manual

[Page 1] Husqvarna K 3000

EE EE nn nn gg gg ll ll ii ii ss ss hh hh K3000 K3000 Wet Oper ator ′ s manual Please r ead the operator’s manual carefully and make sure you understand the instructions before using the machine. ...

[Page 2] Husqvarna K 3000

KEY T O SYMBOLS 2 – English Symbols on the mac hine: W ARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the opera...

[Page 3] Husqvarna K 3000

CONTENTS English – 3 Contents KEY TO SYMBOLS Symbols on the machine: ..................................... 2 Symbols in the operator’s manual: ....................... 2 CONTENTS Contents .............................

[Page 4] Husqvarna K 3000

4 – English WHA T IS WHA T? What is what on the po wer cutter - K3000? 1 Rear handle 2 Guard for the blade 14” 3 Cutting blade 4 Locking the axle 5 Front handle 6 Inspection covers 7 Power switch lock 8 Switch 9 Rating pl...

[Page 5] Husqvarna K 3000

English – 5 WHA T IS WHA T? What is what on the po wer cutter - K3000 Wet? 1 Rear handle 2 Guard for the blade 3 Water kit 4 Cutting blade 5 Locking the axle 6 Front handle 7 Inspection covers 8 Power switch lock 9 Switch 1...

[Page 6] Husqvarna K 3000

GENERAL SAFETY PRECA UTIONS 6 – English Steps bef ore using a new power cutter • Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. • The machine is only ...

[Page 7] Husqvarna K 3000

GENERAL SAFETY PRECA UTIONS English – 7 Mac hine ′′ ′′ s safety equipment This section descr ibes the machine ′ s safety equipment, its purpose, and how checks and maintenance should be carried out to ens...

[Page 8] Husqvarna K 3000

GENERAL SAFETY PRECA UTIONS 8 – English Guar d for the blade This guard is fi tted above the cutting blade and is designed to prevent parts of the blade or cutting fragments from being thrown towards the user. Checking the bl...

[Page 9] Husqvarna K 3000

SAFETY INSTRUCTIONS English – 9 General safety warnings Save all warnings and instructions for future reference. The term ”power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool...

[Page 10] Husqvarna K 3000

SAFETY INSTRUCTIONS 10 – English Personal safety • Stay alert, watch what you are doing and use common sense when operaing a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A mom...

[Page 11] Husqvarna K 3000

SAFETY INSTRUCTIONS English – 11 Cutting blades General • Cutting blades are available in two basic designs; abrasive baldes and diamond blades. • High-quality blades are often most economical. Lower quality blades often have inferior cutting...

[Page 12] Husqvarna K 3000

SAFETY INSTRUCTIONS 12 – English Abrasive blades for different materials Diamond blades Diamond blades consist of a steel core provided with segments that contain industrial diamonds. Diamond blades ensure lower costs per cutting operation, fewer...

[Page 13] Husqvarna K 3000

SAFETY INSTRUCTIONS English – 13 General working instructions Cutting technique The technique described below is of a general character. Check information for each blade regarding individual cutting characteristics (for example, diamond blades r...

[Page 14] Husqvarna K 3000

SAFETY INSTRUCTIONS 14 – English How to avoid kickback What is kickback? The word kickback is used to describe the sudden reaction that causes the power cutter and cutting blade to be thrown from an object when the upper quadrant of the blade, k...

[Page 15] Husqvarna K 3000

ASSEMBLY English – 15 Assembly Fitting the cutting blade Husqvarna’s blades are approved for hand-held power cutters. Blades are manufactured with three different diameters of centre holes: 20 mm (0.787"), 22.2 mm (7/ 8") and 25.4 mm ...

[Page 16] Husqvarna K 3000

STARTING AND STOPPING 16 – English Before starting K3000 Wet Water connector • Connect the water hose to the water supply (A). The water is switched on and off with the water tap (B). Starting • Grip the front handle with the left hand. • Gr...

[Page 17] Husqvarna K 3000

MAINTENANCE English – 17 General Cleaning Cooling system The machine is equipped with an efficient fan to cool the motor. Cooling air which is drawn in through the grille by the machines rear handle passes over the stator and rotor and out thro...

[Page 18] Husqvarna K 3000

MAINTENANCE 18 – English Bevel gear The grease in the gear housing should be changed every 4 months. Use high quality gear grease The gear housing must not be filled completely with grease. The grease expands as the machine heats up during oper...

[Page 19] Husqvarna K 3000

English – 19 TECHNICAL DATA Note 1: Noise emissions in the environment measured as sound power (L WA ) in conformity with EN 60745-1. Note 2: Noise pressure level according to EN 60745-1. Reported data for noise pressure level has a typical statist...

[Page 20] Husqvarna K 3000

20 – English TECHNICAL DATA Cutting equipment Max. blade speed, rpm 4500 Recommended cable dimensions Cutting blade, mm/inches Max. peripheral speed, m/s 300/12 80 350/14 100 Cable area 1,5 mm 2 2,5 mm 2 Input voltage 100-120 V 20 m 40 m Input volt...

[Page 21] Husqvarna K 3000

English – 21 TECHNICAL DATA EC-declaration of conformity (Applies to Europe only) Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the power cutter Husqvarna K3000, K3000 Wet dating from 2010 ...

[Page 22] Husqvarna K 3000

1153343-26 ´®z+UB@¶60¨ ´®z+UB@¶60¨ 2009-12-29 Original instructions ...