Husqvarna PZ54 Operator's Manual

Download or browse on-line these Operator's Manual for Husqvarna PZ54 Lawn and Garden Equipment, Lawn Mower.

Husqvarna PZ54 Manual Information:

This manual for Husqvarna PZ54, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 68 pages, and the size of the file at download is . The document type is Operator's Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Husqvarna PZ54. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Husqvarna PZ54

Operator Manual Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceed...

[Page 2] Husqvarna PZ54

©2012. All rights reserved. Orangeburg, SC. Printed in U.S.A. To implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these ins...

[Page 3] Husqvarna PZ54

CONTENTS INTRODUCTION ............................................................... 5 Driving and Transport on Public Roads ...................... 5 Towing ......................................................................... 5 Operating .........

[Page 4] Husqvarna PZ54

WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate th...

[Page 5] Husqvarna PZ54

5 INTRODUCTION Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmissi...

[Page 6] Husqvarna PZ54

6 INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is deliv...

[Page 7] Husqvarna PZ54

SYMBOLS AND DECALS 7 R N These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. Used in this publication to notify the reader of a risk of personal injury or death, particularly...

[Page 8] Husqvarna PZ54

SYMBOLS AND DECALS 8 Moving sharp blades under cover Warning! Rotating blades, keep away from the discharge deck Do not touch parts Battery acid is corrosive, explosive and flammable Read Operator’s Manual Shut off engine and remove key befor...

[Page 9] Husqvarna PZ54

SAFETY 9 0000-000 Read the operator’s manual before starting the machine 0000-000 Clear the area of objects before mowing Safety Instructions These instructions are for your safety. Read them carefully. WARNING! THIS CUTTING MACHINE IS CAPABLE OF...

[Page 10] Husqvarna PZ54

SAFETY 10 8011-520 Never take passengers WARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide...

[Page 11] Husqvarna PZ54

SAFETY 11 Personal Safety Equipment • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes or boots, preferably with steel toe caps. • A...

[Page 12] Husqvarna PZ54

SAFETY 12 • Do not try to stabilize the machine by putting a foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. WARNING! CHILDR...

[Page 13] Husqvarna PZ54

SAFETY 13 8011-516 Never fill the fuel tank indoors WARNING! The engine and the exhaust system become very hot during operation. There is risk for burns if touched. Allow engine and exhaust system to cool before refueling. Safe Handling of Gasolin...

[Page 14] Husqvarna PZ54

SAFETY 14 8011-515 Never drive the machine in an enclosed space WARNING! The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after handl...

[Page 15] Husqvarna PZ54

SAFETY 15 8009-728 Risk of sparking WARNING! Avoid electrical sparking and its consequences by the following routines: 8011-514 Regularly clean deck Sparking can occur when working with the battery and the heavy cables of the starter circuit. This ...

[Page 16] Husqvarna PZ54

SAFETY 16 Transport • The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer. • Use an approved trailer to transport the machine. Activate the parking brake,...

[Page 17] Husqvarna PZ54

SAFETY 17 Rollover Protection System (ROPS) The ROPS increases the basic weight of the unit by 73 lbs/33 kg. • Do not use ROPS as a lifting, attaching or anchoring point. • Do not use ROPS for wrecking or towing. • Do not exceed Max GVW: 2...

[Page 18] Husqvarna PZ54

CONTROLS 18 This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Kohler or Kawasaki four-stroke overhead valve engine. Transmission from the engine is made via belt-driven hydraulic pumps. Using the left an...

[Page 19] Husqvarna PZ54

CONTROLS 19 Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral posi...

[Page 20] Husqvarna PZ54

CONTROLS 20 Blade Switch To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully. 8065-085 Blade switch Parking Brake The parking brake is found on the left of the machine. Pull...

[Page 21] Husqvarna PZ54

CONTROLS 21 8065-059 Ignition switch - RUN position Release the key to the RUN position when the engine has started. For using ACCESSORY, turn the key clockwise. 8065-057 Ignition switch - accessory Ignition Switch The ignition key is placed on the ...

[Page 22] Husqvarna PZ54

CONTROLS 22 8065-085 Choke control Choke Control The choke control is used for cold starts in order to provide the engine with a richer fuel mixture. For cold starts the control should be pulled up. Fuses Fuses are located on the right hand side of ...

[Page 23] Husqvarna PZ54

CONTROLS 23 1 2 Cutting Height Pedals The cutting height pedals release the deck lift to allow setting the desired deck height. Apply pressure to the lift pedal and rotate foot to also apply pressure to the release pedal, unlocking the deck lift. ...

[Page 24] Husqvarna PZ54

CONTROLS 24 Seat Adjustment Lever The seat can be adjusted lengthways with the lever located at the right side of the seat (as seen by the driver in the seat). When making adjustments the lever is moved upward. Adjustments may be made to seat susp...

[Page 25] Husqvarna PZ54

CONTROLS 25 IMPORTANT INFORMATION Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of...

[Page 26] Husqvarna PZ54

OPERATION 26 Read the Safety Instructions section and the following pages if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. This section sho...

[Page 27] Husqvarna PZ54

OPERATION 27 Before Starting 1. Read the sections on Safety and Controls before starting the machine. 2. Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fue...

[Page 28] Husqvarna PZ54

OPERATION 28 Starting the Engine 1. Sit on the seat. 2. Raise the mower deck to the transport position by setting the lift pedals fully forward. 3. Activate the parking brake. 4. Disengage the mower blades by pressing the blade switch downwards...

[Page 29] Husqvarna PZ54

OPERATION 29 6. Move the throttle to the middle position. 7. If the engine is cold, the choke control should be pulled up. 8. Turn the fuel selector to the desired tank. 9. Press in and turn the ignition key to the start position. 8065-089 Set ...

[Page 30] Husqvarna PZ54

OPERATION 30 Weak Battery If the battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.) Jumper Cables Use 1. Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, takin...

[Page 31] Husqvarna PZ54

OPERATION 31 Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the p...

[Page 32] Husqvarna PZ54

OPERATION 32 Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety Instructions. WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. 8065-006 Release the parking brake �...

[Page 33] Husqvarna PZ54

OPERATION 33 8011-603b Mowing pattern Mowing Tips • Observe and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it until the desired mowing result is attained. The average lawn should b...

[Page 34] Husqvarna PZ54

OPERATION 34 Stopping the Engine 1. Move the throttle to the minimum position (tortoise symbol).pressing the blade switch. 2. Move the steering controls outward to the neutral position. 3. Disengage the mower deck by depressing the blade switch...

[Page 35] Husqvarna PZ54

OPERATION 35 WARNING! No adjustments or maintenance should be carried out unless: • the engine stopped • the ignition key removed • the parking brake activated Moving Machine By Hand Bypass Valves Bypass valves are used to release the syste...

[Page 36] Husqvarna PZ54

MAINTENANCE 36 MAINTENANCE Daily At least once each year Maintenance interval in hours Before After 50 250 500 Check the parking brake ● Check the engine’s oil level (every refueling) ■ Check the safety system ● Check for fuel and oil lea...

[Page 37] Husqvarna PZ54

MAINTENANCE 37 WARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to OFF position and remove the key. • Make sure ...

[Page 38] Husqvarna PZ54

MAINTENANCE 38 1 2 Battery The mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals c...

[Page 39] Husqvarna PZ54

MAINTENANCE 39 Safety System This machine is equipped with a safety system that prevents starting or driving under the following conditions. The engine can only be started when: 1. The mower deck is disengaged. 2. The steering controls are in the...

[Page 40] Husqvarna PZ54

MAINTENANCE 40 1 2 1¾" Parking Brake Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action. IMPORTANT INFORMATION Th...

[Page 41] Husqvarna PZ54

MAINTENANCE 41 A C B D 1 /8"-¼" gap with park brake engaged 8065-052 Parking brake adjustment 5. If adjustments are needed, loosen B jam nut and turn A jam nut until the correct distance is achieved. Retighten B jam nuts against A jam...

[Page 42] Husqvarna PZ54

MAINTENANCE 42 8065-040 Release the belt tension Deck Belt Deck Belt Removal Park on a level surface. Apply park brake. Lower the deck into the lowest cutting position. 1. Remove foot plate and belt shields. 2. Remove any dirt or grass that may ha...

[Page 43] Husqvarna PZ54

MAINTENANCE 43 1 2 3 Pump Belt The belts are not adjustable. Replace belts if they begin to slip from wear. Replacing Pump Belt Park the mower on a level surface. Engage the parking brake. Belt Removal 1. Remove the deck belt (see Deck Belt Remova...

[Page 44] Husqvarna PZ54

MAINTENANCE 44 2 3 1 IMPORTANT INFORMATION The sharpening of blades should be carried out by an authorized service workshop. Cutting Blades To attain the best mowing effect, it is important that blades are well sharpened and not damaged. Replace bl...

[Page 45] Husqvarna PZ54

MAINTENANCE 45 2 1 Adjusting the Mower Deck Leveling Deck Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See Tire Pressures in Maintenance section. If tires are under or over infl...

[Page 46] Husqvarna PZ54

MAINTENANCE 46 2 1 Anti-scalp Rollers Anti-scalp rollers keep the deck in the proper position to help prevent scalping in most terrain conditions. Do not adjust the rollers to support the deck. IMPORTANT INFORMATION Adjust anti-scalp rollers with t...

[Page 47] Husqvarna PZ54

MAINTENANCE 47 Use protective glasses when cleaning and washing. Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is...

[Page 48] Husqvarna PZ54

48 LUBRICATION 48 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Filter change Level check 8065-031 Lubrication Schedule General Remove the ignition key to prevent unintentional movements during lubrication. Wh...

[Page 49] Husqvarna PZ54

49 LUBRICATION 49 Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a gre...

[Page 50] Husqvarna PZ54

50 LUBRICATION 50 1 3 2 8065-036 1. Pump filter 2. Oil reservoir 3. Drain port Changing the hydraulic pump oil and filter Hydraulic Drive Fluid and Filter Change The hydraulic drive is designed with an external filter for ease of maintenance. To ...

[Page 51] Husqvarna PZ54

51 LUBRICATION 51 Transmission Purging Procedures Due to the effects air has on efficiency in hydrostatic drive applications, it is critical to purge the system. These purge procedures should be implemented any time a hydrostatic system has been o...

[Page 52] Husqvarna PZ54

TROUBLESHOOTING 52 Problem Cause Engine will not start • Blade switch is engaged. • Steering controls are not locked in the neutral position • Parking brake is not activated • Battery is dead • Contamination in the carburetor or fuel l...

[Page 53] Husqvarna PZ54

TROUBLESHOOTING 53 Problem Cause Engine overheats • Clogged air intake or cooling fins • Engine overloaded • Poor ventilation around engine • Defective engine speed regulator • Too little or no oil in the engine • Contamination in ...

[Page 54] Husqvarna PZ54

STORAGE 54 Winter Storage The machine should be readied for storage at the end of the mowing season or if it will not be in use for longer than 30 days. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues tha...

[Page 55] Husqvarna PZ54

WIRING DIAGRAM 55 TIMER SCHEMATIC ...

[Page 56] Husqvarna PZ54

TECHNICAL DATA 56 PZ54 / 966614003 Engine Manufacturer Kawasaki 1) Type FX751V Power 24.5 HP (19.4 Kw) @ 3600 rpm 2) Lubrication Pressure w/ Oil Filter Fuel Min 87 octane unleaded (Max ethyl alcohol 10%, Max MTBE 15%) Fuel tanks capacity 11 gallon...

[Page 57] Husqvarna PZ54

TECHNICAL DATA 57 PZ54 / 966614003 Frame Cutting Width 54" (137.2 cm) Cutting Height 1"-5" (2.5-12.7 cm) Uncut Circle 0 Number of Blades 3 Blade Length 19" / 48.2 cm Anti-Scalp 4 Adjustable Sprung Seat Suspension Hinged Arm Rests ...

[Page 58] Husqvarna PZ54

TECHNICAL DATA 58 Engine crankshaft bolt 50 ft/lb (67 Nm) Deck pulley bolts 150 ft/lb (203 Nm) Lug nuts 75 ft/lb (100 Nm) Blade bolt 90 ft/lb (122 Nm) Standard ¼" fasteners 9 ft/lb (12 Nm) Standard 5 /16" fasteners 18 ft/lb (2...

[Page 59] Husqvarna PZ54

CONFORMITY CERTIFICATES 59 USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the requirements. This is also applicable to special requirements for any of the states, (Californi...

[Page 60] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 60 Delivery Service Charge and connect the battery. ¨ Adjust the tire pressure of all wheels to 15 PSI (1 bar). ¨ Connect the contact box to the cable for the seat’s safety switch. ¨ Check hy...

[Page 61] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 61 After 10 hours Change the engine oil. ¨ Change the oil filter. ¨ Check hydraulic oil level. ¨ Inspect hydraulic hoses. ¨ Inspect hydraulic belt ¨ Inspect hydraulic filter. ¨ Check neutr...

[Page 62] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 62 Daily Service Clean debris from mower. ¨ Check engine oil level. ¨ Check the tire pressures. ¨ Check underside of deck. ¨ Inspect deck pulleys. ¨ Check/clean the engine’s cooling air int...

[Page 63] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 63 50-Hour Service Clean debris from mower. ¨ Check engine oil level. ¨ Check the tire pressures. ¨ Check underside of deck. ¨ Inspect deck pulleys. ¨ Check/clean the engine’s cooling air i...

[Page 64] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 64 250-Hour Service Grease fittings (caster pivots and caster wheels) ¨ Inspect dampers ¨ Inspect frame ¨ Inspect throttle and choke cables ¨ Inspect hardware ¨ Check the tire pressures ¨ C...

[Page 65] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 65 500-Hour Service Grease fittings (caster pivots and caster wheels) ¨ Inspect dampers ¨ Inspect frame ¨ Inspect throttle and choke cables ¨ Inspect hardware ¨ Check the tire pressures ¨ C...

[Page 66] Husqvarna PZ54

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 66 At Least Once Each Year Clean the engine’s cooling air intake. ¨ Replace the air cleaner’s pre-filter (foam). ¨ Replace the air filter’s paper cartridge. ¨ Change the engine oil. ¨ ...

[Page 67] Husqvarna PZ54

...

[Page 68] Husqvarna PZ54

115 520727 Rev A 2012-10-30 www.husqvarna.com ...