ICOM IC-40Jr Instruction Manual

Download or browse on-line these Instruction Manual for Icom IC-40Jr Transceiver.

Icom IC-40Jr Manual Information:

This manual for Icom IC-40Jr, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 32 pages, and the size of the file at download is . The document type is Instruction Manual.

Download Manual

Summary of Contents:

[Page 1] Icom IC-40Jr

UHF C.R.S. FM TRANSCEIVER INSTRUCTION MANUAL ...

[Page 2] Icom IC-40Jr

i FOREWORD Thank you for purchasing the IC-40Jr UHF C.R.S. (Citizen Radio Service) FM transceiver. This C.R.S. FM transceiver is designed for those who require top quality, performance and outstanding reliability under the most demanding conditions. ...

[Page 3] Icom IC-40Jr

ii DO NOT modify the transceiver for any reason. DO NOT transmit for more than 3 sec., when operating with the group mode and/or call ring function. Transmission in a form other than speech is limited, and should be of a duration of less than 3 sec. ...

[Page 4] Icom IC-40Jr

TABLE OF CONTENTS FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i IMPORTANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i CAUTION . . . . . . . . . . . ....

[Page 5] Icom IC-40Jr

1 1 ACCESSORY ‘‘ Accessory attachment D Belt clip Attach the belt clip using the supplied screw. D Antenna adjustment Adjust the antenna position as shown in the diagram. Keep the jack cover attached when jacks are not in use to protect from wat...

[Page 6] Icom IC-40Jr

2 2 PANEL DESCRIPTION ‘‘ Switches, controls, keys and connectors q ANTENNA !1 SP/MIC JACKS !0 [VOL] o FUNCTION DISPLAY i [POWER] u [MODE] y MIC w [PTT] e [UP/Y] r [DOWN/Z] t SPEAKER ...

[Page 7] Icom IC-40Jr

3 PANEL DESCRIPTION 2 q ANTENNA Extend the antenna completely when using the transceiver. • The antenna collapses completely into the transceiver body for car- rying purposes. • The antenna can be adjusted 90 degrees from the regular position whe...

[Page 8] Icom IC-40Jr

4 2 PANEL DESCRIPTION ‘‘ Function display q TRANSMIT INDICATOR Appears while transmitting. w BUSY INDICATOR Appears while receiving a signal or when the squelch is open. e KEY LOCK INDICATOR (p. 18) Appears during key lock function ON. r REPEATE...

[Page 9] Icom IC-40Jr

5 BATTERY PACK 3 ‘‘ Installing batteries in the battery case Install 3 AA size alkaline, dry cell batteries or the optional BP-202 BATTERY PACK as illustrated below. q Remove the battery case cover from the transceiver. w Install 3 ×AA size alka...

[Page 10] Icom IC-40Jr

6 3 BATTERY PACKS ‘‘ Battery pack charging The optional BP-202 BATTERY PACK includes rechargeable Ni-Cd batteries and can be charged approx. 300 times. Charge the battery pack before first operating the transceiver or when the battery pack beco...

[Page 11] Icom IC-40Jr

BATTERY PACKS 3 ‘‘ Charging connections D Rapid charging with the BC-119+AD-89 q Insert the optional AD-89 DESKTOP CHARGER ADAPTER into the charging slot of the BC-119. w Insert the battery pack, either by itself or attached to the trans- ceiver...

[Page 12] Icom IC-40Jr

8 4 BASIC OPERATION ✔ What is squelch ? A squelch circuit allows you to mute undesired noise while re- ceiving no signal and emit audio while receiving signals. This provides quiet standby. The [ MODE] key changes the squelch setting. This is usefu...

[Page 13] Icom IC-40Jr

9 4 BASIC OPERATION ‘‘ Selecting the operating channel Push [UP/Y] or [DOWN/Z] keys sev- eral times until the desired operating channel number appears in the dis- play. • While pushing and holding [UP/Y] or [DOWN/Z] keys, the displayed channel ...

[Page 14] Icom IC-40Jr

10 5 RECEIVE AND TRANSMIT q Push [MODE] for 1 sec. to open the squelch. • Adjust volume to the desired audio level. (See p. 8) w Select a desired operating channel. When a signal is received: • “ ” appears in the display. • Squelch opens a...

[Page 15] Icom IC-40Jr

11 5 RECEIVE AND TRANSMIT ✔ Talk Range The IC-40Jr is designed to maximize performance and improve transmission range in the field. However, the single most impor- tant factor in transmit range is your surrounding environment. These radios are “...

[Page 16] Icom IC-40Jr

12 6 REPEATER OPERATION A repeater amplifies received signals and re-transmits them on a different channel, allowing you to communicate over greater dis- tances with improved reliability. When using a repeater, the transmit channel is shifted from t...

[Page 17] Icom IC-40Jr

13 7 SCAN FUNCTION Scanning is an efficient way to locate signals quickly over all chan- nels. Select scan resume condition in advance, using Initial Set Mode (p. 18) D Starting the scan ➥ While pushing [UP/Y], push [DOWN/Z] to start the scan. �...

[Page 18] Icom IC-40Jr

‘‘ Setting the group code The IC-40Jr is equipped with 38 group codes. Group mode opera- tion provides communication with silent standby since you will only receive calls from group members using the same group number. First of all, set the same ...

[Page 19] Icom IC-40Jr

8 GROUP MODE (CTCSS) 15 D CTCSS code table (unit: Hz) Code Freq. Code Freq. Code Freq. Code Freq. 01 67.0 11 97.4 21 136.5 31 192.8 02 71.9 12 100.0 22 141.3 32 203.5 03 74.4 13 103.5 23 146.2 33 210.7 04 77.0 14 107.2 24 151.4 34 218.1 05 79.7 15 11...

[Page 20] Icom IC-40Jr

9 RING FUNCTION 16 ‘‘ Smart-Ring The Smart-Ring function has an answer back feature. This allows you to confirm whether or not a call has reached the receiving party. q Set the same group code number for all of your group transceivers. (See p. ...

[Page 21] Icom IC-40Jr

17 10 OTHER FUNCTIONS ‘‘ Initial set mode Initial set mode is accessed at power ON and allows you to set sel- dom changed settings. In this way you can “customise” the trans- ceiver operations to suit your preferences and operating style. D A...

[Page 22] Icom IC-40Jr

18 10 OTHER FUNCTIONS D Lock function This function electronically locks all keys and switches to prevent accidental channel changes and function access. ➥ Continue to hold [POWER] down for 2 sec. after power ON to turn the lock function ON and OFF...

[Page 23] Icom IC-40Jr

OTHER FUNCTIONS 10 19 D PTT hold function This function frees you from having to constantly push [PTT] during conversation. q While pushing [PTT], turn the power ON to switch the PTT hold function ON and OFF. •“ ≈ ” appears in the display whe...

[Page 24] Icom IC-40Jr

20 10 OTHER FUNCTIONS ‘‘ ATS (Automatic Transponder System) This allows you to confirm whether or not a call has reached the re- ceiving party even if the operator is temporarily away from the transceiver. No “Ring” tone is emitted with this...

[Page 25] Icom IC-40Jr

21 10 OTHER FUNCTIONS ‘‘ Low Battery indicator ➥ Appears when the battery is nearing ex- haustion. • A warning beep is emitted at power ON. ➥ Appears and flashes when battery replace- ment is necessary. ‘‘ Resetting the transceiver Ini...

[Page 26] Icom IC-40Jr

22 10 OTHER FUNCTIONS ‘‘ Optional HM-75A functions The optional HM-75A allows you to remotely select operating chan- nels, open the squelch, etc. The switches on the HM-75A function as follows. CAUTION: When connecting the HM-75A to the transcei...

[Page 27] Icom IC-40Jr

23 11 OPTIONS D Battery pack BP-202 Ni-Cd BATTERY PACK 3.6V/700 mAh rechargeable battery pack, allows approx. 10 hours of operation. (pgs. 6–7) D Charger BC-119 DESKTOP CHARGER + AD-89 DESKTOP CHARGER ADAPTER Rapidly charge battery packs in 1 to 1...

[Page 28] Icom IC-40Jr

24 12 SPECIFICATIONS GENERAL • Frequency coverage : 40 UHF C.R.S. channels (476.425–477.400 MHz) • Mode : F3E (FM) • Frequency stability : ±3.0 kHz • Frequency resolution : 25 kHz • Power supply requirement: 4.5 V (AA × 3) or BP-202 •...

[Page 29] Icom IC-40Jr

12 SPECIFICATIONS 25 ï Channel frequency list (Unit: MHz) ‘‘ Channel number and group number Use this page to record your group operating channel number (p. 9) and group channel number (p. 14) for your reference. Operating channel number Group c...

[Page 30] Icom IC-40Jr

13 WARRANTY 26 Icom Warranty Icom Incorporated is proud of the technology within, and the quality of workmanship of its products. Icom (Australia) Pty. Ltd., the authorised Icom Distributor, warrants this Icom product to be free defects in material o...

[Page 31] Icom IC-40Jr

13 WARRANTY 27 This Warranty is in addition to the benefits conferred by Federal and State legislation and, to the extent allowed thereunder and without in any way limiting and implied warranty of merchantability or fitness for a particular purpose,...

[Page 32] Icom IC-40Jr

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan A-5691D-1AU Printed in Japan © 2000 Icom Inc. ...