Epson PowerLite 4100 Operator's Manual

Download or browse on-line these Operator's Manual for Epson PowerLite 4100 Printer, Projector.

Epson PowerLite 4100 Manual Information:

This manual for Epson PowerLite 4100, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 459 pages, and the size of the file at download is 2.43 Mb. The document type is Operator's Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Epson PowerLite 4100. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Epson PowerLite 4100

4100 PRINTER OPERATOR'S GUIDE Part No: 066-00428-02 February 12, 1998 — Rev. F ...

[Page 2] Epson PowerLite 4100

ii Contents ...

[Page 3] Epson PowerLite 4100

Operator's Guide iii Copyright © 2000, Output Technology Corporation All rights reserved under the Berne Convention. TRADEMARKS DEC LA210 is a registered trademark of Digital Equipment Corporation. Epson is a registered trademark of Epson A...

[Page 4] Epson PowerLite 4100

iv Contents IMPORTANT SAFETY PRECAUTIONS DANGER: KEEP HAIR, HANDS, AND CLOTHING AWAY FROM MECHANISM, AND AVOID HOT SURFACES. VORSICHT: HAAR, HÄNDE UND KLEIDUNG VON DEM MECHANISMUS FERNHALTEN, UND HEISSE FLÄCHEN MEIDEN. DANGER: N'APPROCHER N...

[Page 5] Epson PowerLite 4100

Operator's Guide v • DO NOT operate the printer unless its voltage is set to the local line voltage, as described in this manual. • Keep printer vents free from obstructions. • Keep the printer dry. If water is accidentally spilled ...

[Page 6] Epson PowerLite 4100

vi Contents SUPPLIES AND SERVICES Important ! For best results and longest printer life, insist on genuine, factory- approved, ribbon cartridges. (Re-inked or remanufactured ribbon cartridges are not suitable.) Obtain factory-approved ribbon cart...

[Page 7] Epson PowerLite 4100

Operator's Guide vii FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agai...

[Page 8] Epson PowerLite 4100

viii Contents EPA ENERGY STAR PRINTERS PARTNER The 4100 printer complies with voluntary standards for low-power consumption as set forth by the U.S. Environmental Protection Agency. DOC COMPLIANCE STATEMENT This digital apparatus does not exceed the ...

[Page 9] Epson PowerLite 4100

Operator's Guide ix CERTIFICATE OF MANUFACTURER/IMPORTER It is hereby certified that the 4100 Series printers have been suppressed in accordance with the conditions set out in the BMPT- AmtsbiVfg 243/1991 and 46/1992. The operation of some equi...

[Page 10] Epson PowerLite 4100

x Contents Contents Installation See the Kwik Installation and Startup Basics Basic Physical Features ................................................................. 1 Basic Startup and Printing .......................................................

[Page 11] Epson PowerLite 4100

Operator's Guide xi Operations Common Operations ....................................................................21 LoadingPaper .......................................................................21 Adjusting the Printhead Gap ............

[Page 12] Epson PowerLite 4100

xii Contents Configuration, continued Active Interface ............................................................ 63 Serial Options .............................................................. 64 Input Buffer Size ................................

[Page 13] Epson PowerLite 4100

Operator's Guide xiii Configuration, continued Barcode Strike...............................................................91 Barcode Density ............................................................91 System Options ...........................

[Page 14] Epson PowerLite 4100

xiv Contents Troubleshooting, continued Italics (Epson Emulation) .................................................... 123 Print Positioning.................................................................. 123 Paper Problems ...........................

[Page 15] Epson PowerLite 4100

Operator's Guide xv Universal Control Commands Index of Universal Control Sequences .......................................150 Alphabetical Summary of Universal Control Sequences ............151 Form Length ......................................

[Page 16] Epson PowerLite 4100

xvi Contents Epson FX-100 Control Commands, continued Graphics ..................................................................................... 201 Line Spacing .............................................................................. 208 ...

[Page 17] Epson PowerLite 4100

Operator's Guide xvii Index of Control Codes and Control Commands.........................234 Alphabetical Summary ................................................................275 4100 Printer VS DEC LA210 Printer................................

[Page 18] Epson PowerLite 4100

xviii Contents Emulations ...........................................................................A-6 Character Sets.....................................................................A-6 Human-Readable Fonts.........................................

[Page 19] Epson PowerLite 4100

Operator's Guide xix Software Handshaking ......................................................B-15 Hardware Handshaking ....................................................B-17 If You Cannot Make It Work ........................................

[Page 20] Epson PowerLite 4100

xx Contents Appendix D - Character Sets, continued Epson Hebrew Character Map.......................................... D-21 IBM Code Page 437 (U.S.) ............................................... D-23 IBM #2 Code Page 437 (Hebrew).....................

[Page 21] Epson PowerLite 4100

Operator's Guide xxi Appendix E - Barcodes Printing Barcodes .......................................................................E-2 Barcode Format Command ........................................................E-4 P1 Through P8 .............

[Page 22] Epson PowerLite 4100

xxii Contents ...

[Page 23] Epson PowerLite 4100

Basics BASIC PHYSICAL FEATURES 1. See "Operator Access," Page 3. 2. See "Switch Panel," Page 6. The Printer (Front View, Shown With Acoustic Hood) JB0-AB1 ...

[Page 24] Epson PowerLite 4100

2Basics 1. See "Interface Connectors," Page 16. 2. See "Power Receptacle," Page 15. The Printer (Rear View, Shown Without Acoustic Hood) JB0-AC1 ...

[Page 25] Epson PowerLite 4100

Operator's Guide 3 1. Use in adjusting printhead gap when loading paper. See "LoadingPaper" and/or "Adjusting the Printhead Gap," Pages 21 and 27. 2. See "Changing Ribbon Cartridge," Page 99. Operator Access JB0-AD...

[Page 26] Epson PowerLite 4100

4Basics BASIC STARTUP AND PRINTING A Check Paper Supply. If necessary, load paper. See "Loading Paper," Page 21. B Close Operator Access Door. C Turn on printer. Press the l side of the power on/off switch (Page 6). D Check Top of Form S...

[Page 27] Epson PowerLite 4100

Operator's Guide 5 E Check Print Quality. Make sure the ON LINE indicator is lit (Page 8) and the operator access door is closed, and then send a file from the host computer to the printer: • If the print is too light or too dark (smudged)...

[Page 28] Epson PowerLite 4100

6Basics BASIC CONTROLS AND INDICATORS POWER ON/OFF SWITCH This power on/off switch is located at the left-rear corner of the printer. Press the I side of this switch to turn on the printer. Make sure the O side (the off side) is depressed when :...

[Page 29] Epson PowerLite 4100

Operator's Guide 7 SWITCH PANEL The switch panel is located at the right-front corner of the printer. The switch panel contains four indicator lights and four keypad switches. JB0-BD PAPER Paper Out (Fault) Indicator . Glows amber when the pr...

[Page 30] Epson PowerLite 4100

8Basics NLQ Near Letter Quality. Glows green to indicate near letter quality printing is selected. To quickly switch between draft quality and NLQ, press and hold ON LINE and then momentarily press NLQ. POWER Power On Indicator. Glows green to ...

[Page 31] Epson PowerLite 4100

Operator's Guide 9 Top Of Form / NLQ / NEXT Key. With printer off line, press to set top of form. (See "Setting Top of Form," Page 30). Printer beeps once when top of form is set. Press along with ON LINE to switch between near le...

[Page 32] Epson PowerLite 4100

10 Basics Form Feed / BACK Key. With printer off line, press once to eject a page, that is, to print anything still in the output line buffer (if applicable) and then to advance paper to the top of the next form. Hold pressed to move paper continuo...

[Page 33] Epson PowerLite 4100

Operator's Guide 11 + Configuration Menu. While pressing FORM FEED , turn on printer to print out the first configuration menu query. (See Configuration section, Page 49.) + Self Test. While pressing LINE FEED , turn on printer to begin a ...

[Page 34] Epson PowerLite 4100

12 Basics + + + Hex Dump (Narrow Form). While pressing ON LINE , FORM FEED , and LINE FEED , turn on printer to place printer in 17.14 pitch hex dump mode. (See "Hex Dump Mode," Page 132.) To exit hex dump mode, turn off the printer. On-L...

[Page 35] Epson PowerLite 4100

Operator's Guide 13 + Move Up Paper/Speed Exit. While pressing ON LINE , momentarily press LINE FEED to advance paper by one microline ( 1 / 144 in.). Use this for fine positioning the paper when setting top of form. (See "Setting To...

[Page 36] Epson PowerLite 4100

14 Basics + Near Letter Quality. While pressing ON LINE , momentarily press NLQ to switch between near letter quality and draft quality printing modes. ...

[Page 37] Epson PowerLite 4100

Operator's Guide 15 BASIC CONNECTIONS POWER RECEPTACLE The power receptacle is located at the left-rear corner of the printer, below the power on/off switch. DA0-H One end of the power cord plugs into the...

[Page 38] Epson PowerLite 4100

16 Basics INTERFACE CONNECTORS Serial Parallel JB0-AA1 Serial and parallel interface connectors are located near the right-rear corner of the printer. Use one of these connectors to interconnect the printer and host computer. Always turn the printer...

[Page 39] Epson PowerLite 4100

Operator's Guide 17 Serial Interface The serial interface connector is a standard RS-232, 25-pin, D-type connector. Normally, thumbscrews attached to the cable connector are used to lock the cable connector to the printer connector. For more in...

[Page 40] Epson PowerLite 4100

18 Basics Three sets of low-high beeps are heard when a paper jam occurs. 4Sec Four-second solid beep is heard when: • Paper runs out* • Left tractor is too far right • Paper out sensor fails ... Intermittent single beeps are heard when a strin...

[Page 41] Epson PowerLite 4100

Operator's Guide 19 One short beep followed by four short-long beeps indicates the printer has encountered a recoverable memory error. † Five long beeps are heard when the printer encounters a nonrecoverable error. †† ...

[Page 42] Epson PowerLite 4100

20 Basics ...

[Page 43] Epson PowerLite 4100

Operations COMMON OPERATIONS LOADING PAPER: JB0-AF1 Loading Paper ...

[Page 44] Epson PowerLite 4100

22 Operations To load paper, follow these steps: 1. Open operator access door. 2. If you plan on loading the same type of paper, note the setting of the printhead gap adjustment lever and then move printhead gap adjustment lever toward you (away fro...

[Page 45] Epson PowerLite 4100

Operator's Guide 23 Paper Specifications* • Type: standard fanfold, edge perforated. Single-part to 6-part paper. • Sheet Width: 3 in. to 16 in. (approx. 76.2 mm to 406.4 mm), including tractor strips. • Form Length: 0.5 to 31.5 in...

[Page 46] Epson PowerLite 4100

24 Operations Do not let paper drag on edge of stand , table, or desk. Front Feed JB0-AG2 Bottom Feed JB0-AH1 ...

[Page 47] Epson PowerLite 4100

Operator's Guide 25 Left Tractor JB0-L1 6. Align paper on tractor sprockets. Make sure that the paper is straight. 7. Adjust the position of the right tractor so that the paper is neither stressed nor buckled. The sprocket pins should sit comfo...

[Page 48] Epson PowerLite 4100

26 Operations ADJUSTING THE PRINTHEAD GAP Warning! Make sure no article of clothing (necktie, jewelry) is hanging into the operator access during this procedure. 1. Open the operator access door. 2. Make sure the printhead gap adjustment lever is pos...

[Page 49] Epson PowerLite 4100

Operator's Guide 27 Printhead Gap Adjustment Lever JB0-AJ1 Adjust the printhead gap adjustment lever for desired print quality. Note : The ideal setting of the printhead gap adjustment lever for longest ribbon and printhead life is just before ...

[Page 50] Epson PowerLite 4100

28 Operations RUNNING A SELF TEST Warning! If you run self test with the operator access door open, make sure no article of clothing (necktie, jewelry) is hanging into the operator access. + While pressing LINE FEED , turn on printer to begin a ro...

[Page 51] Epson PowerLite 4100

Operator's Guide 29 SETTING TOP OF FORM Note : The configuration menu option for form length must be set correctly before setting the top of form. (The factory default form length is 11 in.: usually set to correspond to 11 in. between horizonta...

[Page 52] Epson PowerLite 4100

30 Operations Normally, the horizontal perforation is chosen as the top of form. For this, move the paper so that the horizontal perforation is even with the "TOF" arrow ( ! ) near the right and left edges of the platen. Locating Top Of Fo...

[Page 53] Epson PowerLite 4100

Operator's Guide 31 SWITCHING NLQ AND DRAFT You can switch back-and-forth between near letter quality (NLQ) and draft quality print modes by pressing and holding ON LINE and then momentarily pressing NLQ : + In NLQ mode, the NLQ indicator lig...

[Page 54] Epson PowerLite 4100

32 Operations Emulations and Printer Drivers When a printer acts like another printer, it is said to emulate that printer. Your printer can emulate an Epson FX-100, IBM Proprinter XL, or DEC LA210 printer. You can switch between emulations, as detail...

[Page 55] Epson PowerLite 4100

Operator's Guide 33 CHANGING EMULATIONS The factory default startup emulation is Epson FX-100 , which means that the printer acts like an Epson FX-100 printer after you turn on the power. You can change the default startup emulation using the c...

[Page 56] Epson PowerLite 4100

34 Operations 3. Again, press NEXT . 4. Continue pressing NEXT • • • until the printer prints: EMULATION 5. Then, press YES . The printer prints out: = Epson FX 100 ? 6. If you intend to change emulations, press NEXT . The printer prints...

[Page 57] Epson PowerLite 4100

Operator's Guide 35 PRINTING THE ACTIVE CHARACTER SET The configuration menu provides a way to print out the active character set. For this feature, the active character set is defined as the menu-selected default character set along with any ac...

[Page 58] Epson PowerLite 4100

36 Operations HELP OPTIONS 2. Respond by pressing YES . The printer prints out: Status Print ? 3. Press NEXT . The printer prints out: Menu Tree ? 4. Again, press NEXT . • • 5. Continue pressing NEXT • • • until the printer prints : ...

[Page 59] Epson PowerLite 4100

Operator's Guide 37 "Z" in all three character sets is 5A which is equivalent to decimal 90, using the hexadecimal-to-decimal conversion chart on Page 43. JB0-AM Printout of Epson U.S. Character Set (Factory Default for Epson Emulation...

[Page 60] Epson PowerLite 4100

38 Operations JB0-AN Printout of IBM #1 U.S. Character Set (Factory Default for IBM Emulation) ...

[Page 61] Epson PowerLite 4100

Operator's Guide 39 JB0-AO Printout of DEC U.S./Multilingual Character Set (Factory Default for DEC Emulation) ...

[Page 62] Epson PowerLite 4100

40 Operations Hexadecimal-To-Decimal Conversion (Along with U.S. PC-8 computer terminal characters.) 0- 1- 2- 3- 4- 5- 6- 7- 0 NUL SP 0 @ P ` p 0 16 32 48 64 80 96 112 -1 • !1AQaq 1 173349658197113 -2 • "2BRbr 2 183450668298114 -3 ♥...

[Page 63] Epson PowerLite 4100

Operator's Guide 41 Hexadecimal-To-Decimal Conversion, continued 8- 9- A- B- C- D- E- F- ÇÉá •• ð •• 0 128 144 160 176 192 208 224 240 üæ í • • Ð ß± -1 129 145 161 177 193 209 225 241 éÆó • • Ê •• -2 130 146...

[Page 64] Epson PowerLite 4100

42 Operations What Is a Character Set? A character set consists of up to 256 printable patterns and printer instructions assigned to 256 possible codes. The character set tells the printer what to do or what to print when each of these codes is rece...

[Page 65] Epson PowerLite 4100

Configuration This section provides details on using the printer’s configuration menu. Among other things, the configuration menu contains the printer’s changeable configuration settings. A new printer is preset at the factory to: • Emulate a...

[Page 66] Epson PowerLite 4100

46 Configuration Formatted data files, such as what MS-Windows, or WordPerfect, or Lotus 1-2-3, or another modern software application would send to the printer, contains control commands * imbedded with the text to change many of the configuration ...

[Page 67] Epson PowerLite 4100

Operator's Guide 47 THE CONFIGURATION MENU The configuration menu consists of 42 changeable default settings, eight report (help) options, a performance aid, and an option to recall original factory default settings. A map of the configuration m...

[Page 68] Epson PowerLite 4100

48 Configuration NAVIGATING THE CONFIGURATION MENU To move through the menu, you must respond to the menu options and queries using the YES , BACK , and NEXT keys: , and For example, in response to "Help Options" above, press YES . Th...

[Page 69] Epson PowerLite 4100

Operator's Guide 49 EXITING THE CONFIGURATION MENU There are three ways to exit the configuration menu: • Turn off the printer. • Press EXIT until the printer advances to the next top of form. • Press ON LINE along with LINE FEED...

[Page 70] Epson PowerLite 4100

50 Configuration ADJUSTING THE PRINTER’S PERFORMANCE The best method for adjusting the printer’s performance to match your needs is to: 1. Make interface changes (physical printer connections). 2. Make emulation changes (printer behavior: IBM, ...

[Page 71] Epson PowerLite 4100

Operator's Guide 51 However, because printer drivers do not or cannot change some printer settings, such as the interface or emulation, those settings are important to the printer’s function. These settings must be correctly set as default se...

[Page 72] Epson PowerLite 4100

52 Configuration CONFIGURATION MAP CONFIGURATION MAP* HELP | Status Print? Non-Default List? Hot Key List? Print Active Character Set? 58 | Menu Tree? Print All Options? Diagnostic Codes? Print Data Byte Map? INTERFACE OPTIONS | Active Int...

[Page 73] Epson PowerLite 4100

Operator's Guide 53 CHARACTER OPTIONS 3 | Epson Character Options 82 | | Epson Control Code Map: Epson IBM #1, Epson IBM #2, Epson 79 | | Epson Character Map 4 : France, Germany, U.K., Denmark, Sweden, Italy (Epson), Sp...

[Page 74] Epson PowerLite 4100

54 Configuration 1 0.5-in. increments, including A4 length of 11 2/3 in. 2 "EMULATION" does not appear as a configuration menu option if "Lock Character Set and Emulation" is "On." 3 "CHARACTER OPTIONS" does ...

[Page 75] Epson PowerLite 4100

Operator's Guide 55 Print All Options? Pressing YES prints out a list of all options and all possible option settings. Hot Key List? Pressing YES prints out a list of all power-on and on-line hot keys. Diagnostic Codes? Pressing YES prints...

[Page 76] Epson PowerLite 4100

56 Configuration Print Active Character Set? Pressing YES prints out a chart of all present character and control code assignments, similar to those illustrated on Pages 37 through 39. (See "Printing the Active Character Set," Page 35, f...

[Page 77] Epson PowerLite 4100

Operator's Guide 57 Print Data Byte Map? Pressing YES prints out the present data byte map. Primarily, the data byte map is a troubleshooting and development tool used in customizing character sets. In content, the present data byte map is si...

[Page 78] Epson PowerLite 4100

58 Configuration Source: This is the memory source of the character or control code. The two possibilities are ROM and RAM: • ROM stands for read only memory which is permanent memory. • RAM stands for random access memory which is temporar...

[Page 79] Epson PowerLite 4100

Operator's Guide 59 Data Byte Map (Partial Printout, Example) JB0-BA INTERFACE OPTIONS Pressing YES prints out the first of the interface options listed below: • Active Interface • • Serial Options • Input Buffer Size Active Interf...

[Page 80] Epson PowerLite 4100

60 Configuration Parallel. Enables communication on the parallel interface connector on the back of the printer. For information concerning parallel communications, see Appendix C. Serial. Enables communication on the serial interface connector on...

[Page 81] Epson PowerLite 4100

Operator's Guide 61 Protocol Pressing YES prints out the present protocol setting: • DTR/X-ON/X-OFF (factory default) • DTR • X-ON/X-OFF • ETX/ACK Protocol refers to the "handshaking" technique used for serial communicat...

[Page 82] Epson PowerLite 4100

62 Configuration DTR Polarity Pressing YES prints out the present setting: • High (factory default) • Low See “Hardware Handshaking” in Appendix B. Robust X-ON Pressing YES prints out the present setting: • Off • On (factory def...

[Page 83] Epson PowerLite 4100

Operator's Guide 63 data from the computer. Although the printer will not print data, the computer can send data to the printer. On: The printer transmits X-OFF to the computer when it goes off line. The printer will not accept or print data. ...

[Page 84] Epson PowerLite 4100

64 Configuration 7 Bits: Limits the printer's ability to handle graphics and restricts it to accessing only the lower character and control data bytes (0-127) in the character sets. Parity Pressing YES prints out the present parity bit status...

[Page 85] Epson PowerLite 4100

Operator's Guide 65 Stop Bits Pressing YES prints out the present stop bit status: • 1 Bit (factory default) • 2 Bits The printer uses the stop bit(s) to detect the space in-between data bytes. The stop bit follows the parity bit if par...

[Page 86] Epson PowerLite 4100

66 Configuration computer using universal control commands. You can then specify up to 128 custom characters. Even if you do not intend to download custom characters, minimizing the input buffer to 532 bytes has some side-effect advantages. Conside...

[Page 87] Epson PowerLite 4100

Operator's Guide 67 PRINT STYLE Pressing YES prints out the first of the print style options listed below: • Near Letter Quality • • Bi-Directional Graphics / NLQ • Bold Print • Italics • Char/Inch • Slash Zero Other prin...

[Page 88] Epson PowerLite 4100

68 Configuration On: The printer prints near letter quality (NLQ) characters in 10 12, and 15 pitch (10, 12, and 15 char/in.). NLQ characters have about two to three times the dot density of draft quality characters. NLQ characters are more attr...

[Page 89] Epson PowerLite 4100

Operator's Guide 69 Bold Print Pressing YES prints out the active interface setting: • Off (factory default) • On Off: The printer prints standard normal-weight characters. On: The printer prints bolded characters. Bold (or emphasize...

[Page 90] Epson PowerLite 4100

70 Configuration Note : Characters can only be italicized in the Epson emulation. Also, barcodes and optical character recognition (OCR) fonts cannot be italicized. Subscript/Superscript Pressing YES enables you to include subscripts and superscr...

[Page 91] Epson PowerLite 4100

Operator's Guide 71 Slash Zero Pressing YES prints out: • Off • On (factory default) Off: The printer prints zeroes without a slash. On: The printer prints zeroes with a slash. Note : Optical character recognition (OCR) zeroes cannot...

[Page 92] Epson PowerLite 4100

72 Configuration Lines/Inch Pressing YES prints out the active line space setting: • 6 lpi (factory default) • 8 lpi This sets the number of lines per vertical inch. For an 11 in. form, the printer prints a maximum of 66 lines at 6 lpi or 8...

[Page 93] Epson PowerLite 4100

Operator's Guide 73 Skip Perf Pressing YES prints out: • Off (factory default) • On Off: The printer prints across the horizontal perforation, unless instructed otherwise by the computer's software application. This is the preferr...

[Page 94] Epson PowerLite 4100

74 Configuration On: The printer automatically supplies a line feed for every carriage return command from the computer. (Sometimes referred to as Auto Line Feed.) CR on LF Pressing YES prints out: • Off • On (factory default) Note : Regar...

[Page 95] Epson PowerLite 4100

Operator's Guide 75 Paper Jam Detect Pressing YES prints out: • Off • On (factory default) The printer uses a paper motion sensor on top of the left tractor to detect paper jams. If the paper is supposed to move but it does not, then t...

[Page 96] Epson PowerLite 4100

76 Configuration EMULATION Note : "Emulation" cannot be changed and does not appear as a configuration menu option if "Lock Character Set and Emulation" (Page 92) is set to "On." Pressing YES prints out the active emu...

[Page 97] Epson PowerLite 4100

Operator's Guide 77 Each emulation has a default character set. The factory default character sets for the 4100 printer are English-language U.S.A. The factory default U.S. Epson, IBM, and DEC character sets are illustrated on Pages 39 through...

[Page 98] Epson PowerLite 4100

78 Configuration #2. Although only one character set can be the default character set for the Epson emulation, you can assign a national-use character map or a code page default for each of the three. Note : Do not confuse the IBM #1 and IBM #2 cha...

[Page 99] Epson PowerLite 4100

Operator's Guide 79 Pressing YES prints out the present Epson national-use character map selection: • United States (factory default) • Japan • France • Norway • Germany • Denmark II • United Kingdom • Spain II • Denmark • ...

[Page 100] Epson PowerLite 4100

80 Configuration Epson IBM #2 Code Page Pressing YES prints out the present Epson emulation code page selection for the IBM #2 character set: • Code Page 437 (U.S.), (factory default) • Code Page 850 (Multilingual) • Code Page 860 (Port...