Konica Minolta BIZHUB 500 User Manual

Download or browse on-line these Operation & User’s Manual for Konica Minolta BIZHUB 500 All in One Printer, Printer.

Konica Minolta BIZHUB 500 Manual Information:

This manual for Konica Minolta BIZHUB 500, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 454 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Konica Minolta BIZHUB 500. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Konica Minolta BIZHUB 500

...

[Page 2] Konica Minolta BIZHUB 500

...

[Page 3] Konica Minolta BIZHUB 500

bizhub 500/420 (Phase 2) Contents-1 Contents 1 Introduction 1.1 Trademarks and Registered Trademarks ...................................... 1-4 License information........................................................................ 1-4 OpenSSL ...

[Page 4] Konica Minolta BIZHUB 500

Contents-2 bizhub 500/420 (Phase 2) 2.4 Connecting to the Network ............................................................ 2-13 Network Connection ..................................................................... 2-13 2.5 Flow Chart of Setup ...

[Page 5] Konica Minolta BIZHUB 500

bizhub 500/420 (Phase 2) Contents-3 Book Scanning (Application)........................................................ 3-67 Booklet Pagination (Application).................................................. 3-70 Annotations (Application) ............

[Page 6] Konica Minolta BIZHUB 500

Contents-4 bizhub 500/420 (Phase 2) 4.7 Setting the Main Scan Mode Screen ............................................. 4-34 Default Tab.................................................................................... 4-34 Program Default............

[Page 7] Konica Minolta BIZHUB 500

bizhub 500/420 (Phase 2) Contents-5 4.18 Enabling LDAP Settings ................................................................. 4-90 Enabling LDAP Parameters.......................................................... 4-90 To specify Enabling LDAP ...

[Page 8] Konica Minolta BIZHUB 500

Contents-6 bizhub 500/420 (Phase 2) 4.29 LPD Settings .................................................................................. 4-137 To specify LPD settings.............................................................. 4-137 4.30 Prefix/Suf...

[Page 9] Konica Minolta BIZHUB 500

bizhub 500/420 (Phase 2) Contents-7 For Internet Explorer .................................................................... 5-10 For Netscape Navigator ............................................................... 5-10 5.3 Logging On and Loggi...

[Page 10] Konica Minolta BIZHUB 500

Contents-8 bizhub 500/420 (Phase 2) 5.15 Account Track Registration (Administrator Mode) ...................... 5-63 Account Track Registration .......................................................... 5-63 To register an account.......................

[Page 11] Konica Minolta BIZHUB 500

bizhub 500/420 (Phase 2) Contents-9 5.30 SSL/TLS ......................................................................................... 5-103 SSL/TLS Setting......................................................................... 5-105 To creat...

[Page 12] Konica Minolta BIZHUB 500

Contents-10 bizhub 500/420 (Phase 2) ...

[Page 13] Konica Minolta BIZHUB 500

1 Introduction ...

[Page 14] Konica Minolta BIZHUB 500

...

[Page 15] Konica Minolta BIZHUB 500

Introduction 1 bizhub 500/420 (Phase 2) 1-3 1 Introduction Thank you for choosing this machine. This user manual contains details on the operation of the network connection and scanner functions of the bizhub 500/420, precautions on its use, and ba...

[Page 16] Konica Minolta BIZHUB 500

1 Introduction 1-4 bizhub 500/420 (Phase 2) 1.1 Trademarks and Registered Trademarks KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub ar...

[Page 17] Konica Minolta BIZHUB 500

Introduction 1 bizhub 500/420 (Phase 2) 1-5 OpenSSL Statement OpenSSL License Copyright © 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided th...

[Page 18] Konica Minolta BIZHUB 500

1 Introduction 1-6 bizhub 500/420 (Phase 2) Original SSLeay License Copyright © 1995-1998 Eric Young ([email protected]) All rights reserved. This package is an SSL implementation written by Eric Young ([email protected]). The implementation was wr...

[Page 19] Konica Minolta BIZHUB 500

Introduction 1 bizhub 500/420 (Phase 2) 1-7 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available v...

[Page 20] Konica Minolta BIZHUB 500

1 Introduction 1-8 bizhub 500/420 (Phase 2) 1.2 About This Manual This user manual covers the bizhub 500/420 network and scanning functions. This section introduces the structure of the manual and notations used for product names, etc. This manual ...

[Page 21] Konica Minolta BIZHUB 500

Introduction 1 bizhub 500/420 (Phase 2) 1-9 1.3 Explanation of manual conventions The marks and text formats used in this manual are described below. Safety advices 6 DANGER Failure to observe instructions highlighted in this manner may result in fa...

[Page 22] Konica Minolta BIZHUB 500

1 Introduction 1-10 bizhub 500/420 (Phase 2) Tips 2 Note Text highlighted in this manner contains useful information and tips to ensure safe use of the machine. 2 Reminder Text highlighted in this manner contains information that should be remind...

[Page 23] Konica Minolta BIZHUB 500

Introduction 1 bizhub 500/420 (Phase 2) 1-11 1.4 User manuals The following user manuals have been prepared for this machine. User manual [Copy Operations] This manual contains details on basic operations and the operating procedures for the various...

[Page 24] Konica Minolta BIZHUB 500

1 Introduction 1-12 bizhub 500/420 (Phase 2) ...

[Page 25] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions ...

[Page 26] Konica Minolta BIZHUB 500

...

[Page 27] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-3 2 Before Using the Scan Functions 2.1 Environment Required for Using the Scan Functions The following conditions are required to use the network and scanning functions of this machine. -...

[Page 28] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-4 bizhub 500/420 (Phase 2) 2.2 Available Scanning Functions "Scanning" refers to the operation of reading the image of a document fed through the ADF or placed on the original glass. The scanning functio...

[Page 29] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-5 Sending the Scanned Data in an E-Mail Message The scanned data can be sent to a specified e-mail address. The destination is specified from the touch panel of this machine, and the scann...

[Page 30] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-6 bizhub 500/420 (Phase 2) Sending the Scanned Data as Files (FTP) The scanned data is uploaded to a specified FTP server. The FTP server address, login password, and other information are entered from the touch ...

[Page 31] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-7 Sending the Scanned Data to a Computer on the Network (SMB) The scanned data can be sent to a shared folder on a specified computer. The name of the destination computer, login password,...

[Page 32] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-8 bizhub 500/420 (Phase 2) Saving the Scanned Data in Boxes The scanned data can be saved in boxes created on the machine’s internal hard disk. The data can be used in other applications. The file name can be e...

[Page 33] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-9 2.3 Settings for Using Network/Scanning Functions It is recommended that the settings described below be specified before using the network/scanning functions. The network settings descr...

[Page 34] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-10 bizhub 500/420 (Phase 2) Registering Destinations and Specifying Their Settings The destinations (recipients) of scanned data must be registered. The following registration methods are available. - Register from...

[Page 35] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-11 Setting the From Address To perform Scan to E-Mail, the From address must be registered. The From address is the address that indicates the sender when data is sent. Normally, it is re...

[Page 36] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-12 bizhub 500/420 (Phase 2) Specifying Program Settings The destination and scan settings can be registered together as a single program. This is convenient for frequently scanning documents and sending data unde...

[Page 37] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-13 2.4 Connecting to the Network The machine can be connected to the network. 2 Reminder The machine can be connected via a parallel or USB connection. However, be sure to connect to the ...

[Page 38] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-14 bizhub 500/420 (Phase 2) 2.5 Flow Chart of Setup and Scanning Operations The sequence from the setup operations required to use the scanning functions to the scanning operation is shown below. Specify scan sett...

[Page 39] Konica Minolta BIZHUB 500

Before Using the Scan Functions 2 bizhub 500/420 (Phase 2) 2-15 2 Note Some settings that can be specified on the control panel can also be specified from a computer over a network using PageScope Web Connection. For details, refer to "Specif...

[Page 40] Konica Minolta BIZHUB 500

2 Before Using the Scan Functions 2-16 bizhub 500/420 (Phase 2) ...

[Page 41] Konica Minolta BIZHUB 500

3 Scanning Documents ...

[Page 42] Konica Minolta BIZHUB 500

...

[Page 43] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-3 3 Scanning Documents 3.1 Control Panel 12345678910 24 23 22 21 20 19 18 17 16 15 14 13 12 11 No. Name Description 1 [Power Save] key Press to enter Low Power mode. While the machine is in Low Power m...

[Page 44] Konica Minolta BIZHUB 500

3 Scanning Documents 3-4 bizhub 500/420 (Phase 2) 7 [Copy] key Press to enter Copy mode. (As a default, the machine is in Copy mode.) While the machine is in Copy mode, the indicator on the [Copy] key lights up in green. For details, refer to the...

[Page 45] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-5 7 CAUTION To prevent damage to the touch panel, do not push down on the touch panel with force. % Also, do not push down on the touch panel using hard or sharp objects. ...

[Page 46] Konica Minolta BIZHUB 500

3 Scanning Documents 3-6 bizhub 500/420 (Phase 2) 3.2 Displaying the Scan Screen Display the Scan mode screen in order to perform scanning operations. Turn the machine on. When the machine is ready to make copies, the Basic screen appears. Press the...

[Page 47] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-7 10 Address number display area Shows the number of specified addresses. 11 [Scan Settings] button Used to specify scan settings. No Name Description ...

[Page 48] Konica Minolta BIZHUB 500

3 Scanning Documents 3-8 bizhub 500/420 (Phase 2) 3.3 Sending Data in an E-Mail Message (Scan to E-Mail) Scan to E-Mail The Scan to E-mail operation is used to send images scanned on this machine to an e-mail address as an attachment. The methods de...

[Page 49] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-9 Using Programs "Program" refers to a set of destination addresses and scan settings that are registered together. This feature is convenient for frequently scanning documents and sending d...

[Page 50] Konica Minolta BIZHUB 500

3 Scanning Documents 3-10 bizhub 500/420 (Phase 2) 3 Touch [Scan Settings] to check the specified scan settings. The specified settings can also be changed. – For details on the scan settings, refer to "Specifying the Scan Settings" on ...

[Page 51] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-11 Selecting Group Addresses "Group" refers to multiple destinations that are registered collectively. The following procedure describes how to send data by selecting a group that has been r...

[Page 52] Konica Minolta BIZHUB 500

3 Scanning Documents 3-12 bizhub 500/420 (Phase 2) 3 Select the desired destinations, and then touch [OK]. 4 Touch [Scan Settings], and then specify the scan settings. – For details on the scan settings, refer to "Specifying the Scan Settings...

[Page 53] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-13 6 Load the document into the ADF or position it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn...

[Page 54] Konica Minolta BIZHUB 500

3 Scanning Documents 3-14 bizhub 500/420 (Phase 2) Selecting Destinations From the Address Book "Address book" refers to the collection of destination addresses that were registered in advance. The following procedure describes how to send...

[Page 55] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-15 3 Touch the button for a destination to select it. The selected buttons are highlighted, and the selected destinations are listed under "Broadcast Destinations". Other destination address...

[Page 56] Konica Minolta BIZHUB 500

3 Scanning Documents 3-16 bizhub 500/420 (Phase 2) Searching the Destination The following methods are available for searching the destination. - Detail Search: Searches the address by entering a section of the name or description of the address. - ...

[Page 57] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-17 If "Manual Destination Input" on the Security Details screen (displayed by touching [Security Setting] on the Administrator Setting screen) is set to "Restrict", an LDAP search ...

[Page 58] Konica Minolta BIZHUB 500

3 Scanning Documents 3-18 bizhub 500/420 (Phase 2) 1 Touch [Scan Settings], and then specify the scan settings. – For details on the scan settings, refer to "Specifying the Scan Settings" on page 3-49. 2 After specifying the settings, to...

[Page 59] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-19 Entering the Addresses Directly "Direct input" refers to the operation of directly entering the destination address from the machine’s control panel. Up to five destinations can be combi...

[Page 60] Konica Minolta BIZHUB 500

3 Scanning Documents 3-20 bizhub 500/420 (Phase 2) 3 Enter the destination address, and then touch [OK]. – To specify an additional address, touch [Next Dest.], and then specify the address. – Frequently entered user names and domain names can b...

[Page 61] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-21 4 Touch [Scan Settings], and then specify the scan settings. – For details on the scan settings, refer to "Specifying the Scan Settings" on page 3-49. 5 After specifying the settings, to...

[Page 62] Konica Minolta BIZHUB 500

3 Scanning Documents 3-22 bizhub 500/420 (Phase 2) 3.4 Sending Data to a Server (Scan to FTP) Scan to FTP The Scan to FTP operation can be used in a network environment with an FTP server. The scanned data is sent to a specified folder in an FTP ser...

[Page 63] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-23 Using Programs "Program" refers to a set of destination FTP servers and scan settings that are registered together. The following procedure describes how to send data by selecting a progr...

[Page 64] Konica Minolta BIZHUB 500

3 Scanning Documents 3-24 bizhub 500/420 (Phase 2) 3 Touch [Scan Settings] to check the specified scan settings. The specified settings can also be changed. – For details on the scan settings, refer to "Specifying the Scan Settings" on ...

[Page 65] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-25 Selecting Group Addresses "Group" refers to multiple destinations that are registered collectively. The following procedure describes how to send data by selecting a group that has been r...

[Page 66] Konica Minolta BIZHUB 500

3 Scanning Documents 3-26 bizhub 500/420 (Phase 2) 3 Select the desired destination, and then touch [OK]. The selected destinations are listed under "Broadcast Destinations". 4 Touch [Scan Settings], and then specify the scan settings. – ...

[Page 67] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-27 6 Load the document into the ADF or position it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn...

[Page 68] Konica Minolta BIZHUB 500

3 Scanning Documents 3-28 bizhub 500/420 (Phase 2) Selecting Destinations From the Address Book "Address book" refers to the collection of destination addresses that were registered in advance. The following procedure describes how to send...

[Page 69] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-29 ? How can the address book be searched for the desired address? % Touch [Detail Search] to search for addresses. The address book can be searched for names or addresses. 3 Touch the button for a des...

[Page 70] Konica Minolta BIZHUB 500

3 Scanning Documents 3-30 bizhub 500/420 (Phase 2) 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or position it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scann...

[Page 71] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-31 Entering the Addresses Directly "Direct input" refers to the operation of directly inputting the destination address from the machine’s control panel. Up to five destinations can be spec...

[Page 72] Konica Minolta BIZHUB 500

3 Scanning Documents 3-32 bizhub 500/420 (Phase 2) 3 Enter the host name, destination folder, user name, and password. – Host Name: Use the keyboard that appears in the touch panel to specify the destination host name or IP address, and then touch...

[Page 73] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-33 6 Enter the destination Information, and then touch [OK]. – To specify an additional address, touch [Next Dest.], and then specify the address. The addresses that were entered are listed under &qu...

[Page 74] Konica Minolta BIZHUB 500

3 Scanning Documents 3-34 bizhub 500/420 (Phase 2) 7 Touch [Scan Settings], and then specify the scan settings. – For details on the scan settings, refer to "Specifying the Scan Settings" on page 3-49. 8 After specifying the settings, to...

[Page 75] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-35 3.5 Sending Data to a PC on the Network (Scan to SMB) Scan to SMB The Scan to SMB operation can be used to directly send the scanned data to a specific computer on the network. To use the Scan to Fi...

[Page 76] Konica Minolta BIZHUB 500

3 Scanning Documents 3-36 bizhub 500/420 (Phase 2) SMB Transmission to Windows File Sharing (Mac OS X)/Samba (Linux/Unix) When performing SMB transmission to Mac OS X, Linux, or Unix, the conditions described below must be meet for the network sett...

[Page 77] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-37 Using Programs "Program" refers to a set of destination computers and scan settings that are registered together. The following procedure describes how to send data by selecting a program...

[Page 78] Konica Minolta BIZHUB 500

3 Scanning Documents 3-38 bizhub 500/420 (Phase 2) 3 Touch [Scan Settings] to check the specified scan settings. The specified settings can also be changed. – For details on the scan settings, refer to "Specifying the Scan Settings" on ...

[Page 79] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-39 Selecting Group Addresses "Group" refers to multiple destinations that are registered collectively. The following procedure describes how to send data by selecting a group that has been r...

[Page 80] Konica Minolta BIZHUB 500

3 Scanning Documents 3-40 bizhub 500/420 (Phase 2) 3 Select the desired destinations, and then touch [OK]. 4 Touch [Scan Settings], and then specify the scan settings. – For details on the scan settings, refer to "Specifying the Scan Settings...

[Page 81] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-41 6 Load the document into the ADF or position it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn...

[Page 82] Konica Minolta BIZHUB 500

3 Scanning Documents 3-42 bizhub 500/420 (Phase 2) Selecting Destinations From the Address Book "Address book" refers to the collection of destination addresses that were registered in advance. The following procedure describes how to send...

[Page 83] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-43 ? How can the address book be searched for the desired address? % Touch [Detail Search] to search for addresses. The address book can be searched for names or addresses. 3 Touch the button for a des...

[Page 84] Konica Minolta BIZHUB 500

3 Scanning Documents 3-44 bizhub 500/420 (Phase 2) 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or position it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scann...

[Page 85] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-45 Entering the Addresses Directly "Direct input" refers to the operation of directly inputting the destination address from the machine’s control panel. Up to five destinations can be spec...

[Page 86] Konica Minolta BIZHUB 500

3 Scanning Documents 3-46 bizhub 500/420 (Phase 2) 3 Enter the destination information. – Host Name: Specify the destination host name (enter using capital letters) or the IP address. Type in the destination name using the keyboard, and then touc...

[Page 87] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-47 5 Touch [Scan Settings], and then specify the scan settings. – For details on the scan settings, refer to "Specifying the Scan Settings" on page 3-49. 6 After specifying the settings, to...

[Page 88] Konica Minolta BIZHUB 500

3 Scanning Documents 3-48 bizhub 500/420 (Phase 2) 2 Note Do not turn off the machine until the scanned jobs disappear from the job list. ! Detail The destination folder can also be specified by touching [Reference], then browsing to a computer o...

[Page 89] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-49 3.6 Specifying the Scan Settings Available Settings Detailed scan settings can be specified by touching [Scan Settings] in the Scan mode screen. The settings that can be specified are as follows: It...

[Page 90] Konica Minolta BIZHUB 500

3 Scanning Documents 3-50 bizhub 500/420 (Phase 2) Application Provides functions for adjusting the image to be scanned, for example, for scanning books and for scan- ning pages. "Book Scanning (Application)" on page 3-67 "Booklet P...

[Page 91] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-51 File Type Select the file type for saving the scanned data. The following two file types are available. The encryption level can be selected if "File Type" is set to "PDF". File ...

[Page 92] Konica Minolta BIZHUB 500

3 Scanning Documents 3-52 bizhub 500/420 (Phase 2) 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [File Type]. 3 Select the file type. 4 Select the scan setting. ...

[Page 93] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-53 5 If "PDF" was selected, the encryption settings can be specified. If necessary, touch [Encrypt]. 6 Specify the encryption settings. – Encryption Level1: Select the encryption level. –...

[Page 94] Konica Minolta BIZHUB 500

3 Scanning Documents 3-54 bizhub 500/420 (Phase 2) Resolution Set the scanning resolution to 200 dpi, 300 dpi, 400 dpi, or 600 dpi. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Resolution]. 3 Select the resolution. 4 Touch [OK], and then...

[Page 95] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-55 Simplex/Duplex Select whether to scan one side of the document or both sides. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Simplex/Duplex]. 3 Select the scan type. 4 Touch [OK], and then...

[Page 96] Konica Minolta BIZHUB 500

3 Scanning Documents 3-56 bizhub 500/420 (Phase 2) Original Type Select the type according to the document. The following four image types are available. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Original Type]. 3 Select the image ty...

[Page 97] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-57 Scan Size Set the paper size to be scanned. The available scan sizes are as follows: ! Detail If the document is read using the ADF, the scan size will be fixed to "Auto". 1 Touch [Scan S...

[Page 98] Konica Minolta BIZHUB 500

3 Scanning Documents 3-58 bizhub 500/420 (Phase 2) 3 Select the size and direction. – Touch [Custom Size] to display a screen for specifying the size. – If the values are in millimeters, use the keypad to specify the size. 4 Touch [OK], and then ...

[Page 99] Konica Minolta BIZHUB 500

Scanning Documents 3 bizhub 500/420 (Phase 2) 3-59 To enlarge/reduce the scan to a preset zoom ratio (Zoom setting) The scan can be enlarged or reduced to a preset zoom ratio, such as one of the standard sizes. 1 Touch [Scan Settings] in the Scan mo...

[Page 100] Konica Minolta BIZHUB 500

3 Scanning Documents 3-60 bizhub 500/420 (Phase 2) – If the values are in millimeters. 4 Touch [OK], and then touch [OK] in the next screen that appears. ...