Kyocera DP-1800 Command Reference Manual

Download or browse on-line these Command Reference Manual for Kyocera DP-1800 All in One Printer, Cell Phone.

Kyocera DP-1800 Manual Information:

This manual for Kyocera DP-1800, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 410 pages, and the size of the file at download is . The document type is Command Reference Manual.

Download Manual

This sample of Kyocera DP-1800 Manual is aimed at the following devices list: KM-C3225, FS-1120D, FS-C5100DN, FS-C1020MFP, KM-4530

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Kyocera DP-1800. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Kyocera DP-1800

Command Reference PRESCRIBE Commands ...

[Page 2] Kyocera DP-1800

ii We shall have no liability or responsibility to customers or any other person or entity with respect to any liability, loss or damage caused or alleged to be caused directly or indirectly by equipment sold or furnished by us, including, but not l...

[Page 3] Kyocera DP-1800

iii Typeface Trademark Acknowledgement All resident fonts in the print system are licensed from Bitstream Inc. and Agfa corporation. For font license information for each model, refer to the User’s Manual. Helvetica, Palatino and Times are registe...

[Page 4] Kyocera DP-1800

iv This page is left blank intentionally ...

[Page 5] Kyocera DP-1800

Contents—i Table of Contents Overview of PRESCRIBE Commands by Function 2 Access Commands ————————————————————————————— 2 Print System Setting Commands ————————————�...

[Page 6] Kyocera DP-1800

Contents—ii CSET — Change symbol SET by symbol-set ID ———————————————— 65 CSTK — select Collator STacKer —————————————————————— 68 CTXT — print Centered TeXT ——...

[Page 7] Kyocera DP-1800

Contents—iii MPTE — MP Tray Empty ————————————————————————— 166 MRP — Move to Relative Position ————————————————————— 167 MRPA — Move to Relative Posi...

[Page 8] Kyocera DP-1800

Contents—iv RWRF R — [Read/Write Resource File] Read ———————————————— 256 RWRF T — [Read/Write Resource File] set Terminate string —————————— 257 RWRF W — [Read/Write Resource File] Write da...

[Page 9] Kyocera DP-1800

Contents—v TPRS — Text PaRSing —————————————————————————— 351 TRSM — TRansparency Separate Mode ——————————————————— 352 UNIT — set UNIT of measurement ...

[Page 10] Kyocera DP-1800

Contents—vi ...

[Page 11] Kyocera DP-1800

PRESCRIBE Command Reference ...

[Page 12] Kyocera DP-1800

PRESCRIBE Command Reference 2 1. Overview of PRESCRIBE Commands by Function The tables in this section list all the printing system commands supported by the various models. Support for certain commands varies depending on the printing system model...

[Page 13] Kyocera DP-1800

Overview of PRESCRIBE Commands by Function 3 Page Control, Text, and Comment Commands The placement commands determine where text will be placed on the page. Margin and Page Portrait/Landscape Orientation Commands These commands are used to set ...

[Page 14] Kyocera DP-1800

PRESCRIBE Command Reference 4 Text Spacing Commands These commands control the line spacing, character spacing, underline spacing, and underline thickness. The SLS and SLPI commands are used to set the line spacing. The SCS and SCPI commands are u...

[Page 15] Kyocera DP-1800

Overview of PRESCRIBE Commands by Function 5 Fonts are more fully explained in Chapter 4 of the Technical Reference manual. Cursor Movement Commands These commands move the cursor to specific positions. Cursor movements can be established for absol...

[Page 16] Kyocera DP-1800

PRESCRIBE Command Reference 6 If an attempt is made to create figures outside of the printable area using these commands, the coordinates are adjusted automatically so that the figures print inside the printable area. As in the example below, this ...

[Page 17] Kyocera DP-1800

Overview of PRESCRIBE Commands by Function 7 Raster Graphics Commands Raster graphics commands can be used to draw any graphic design by specifying the individual dots. The dot resolution is selectable from 75, 100, 150, 200, 300, 600, and 1200 do...

[Page 18] Kyocera DP-1800

PRESCRIBE Command Reference 8 Barcode Commands Barcodes conforming to various specifications can be printed simply by specifying the type of barcode and the barcode data. It is also possible to print barcodes with check digits added. Macro Comman...

[Page 19] Kyocera DP-1800

Overview of PRESCRIBE Commands by Function 9 Debug Commands These commands can be used to check the print data in hexadecimal format for print jobs with unexpected output. External Media Control Commands If an external storage, such as JEIDA Ver...

[Page 20] Kyocera DP-1800

PRESCRIBE Command Reference 10 Control Commands for Option Devices A variety of options, such as feeders, sorters, document finishers, etc., are available for print systems. The commands below provides access to the optional equipment. e-MPS Com...

[Page 21] Kyocera DP-1800

PRESCRIBE Commands 11 2. PRESCRIBE Commands In the command format descriptions below, the command is written in fixed-pitch CAPITAL letters. Parameters are indicated in lowercase italics. Optional parameters, which may be omitted, are enclosed in b...

[Page 22] Kyocera DP-1800

PRESCRIBE Command Reference 12 COLOR ACLI — Add CoLor by Index Format ACLI index, color1, color2, color3; Parameters index: integer from 1 to 255 color1: value for red, integer from 0 to 255, in RGB color space value for lightness, number fro...

[Page 23] Kyocera DP-1800

ACLI 13 File !R! RES; DAM; UNIT C; SFNT ’AntiqueOlive-Bd’, 20; CPAL C; SPAL 1; CID 0, 1; ACLI 1, 0, 0, 255; ACLI 2, 0, 255, 0; ACLI 3, 255, 0, 0; MZP 1, 1; SCOL 1; TEXT ’This line is printed in blue.’; MZP 1, 2.4; SCOL 2; TEXT ’This line...

[Page 24] Kyocera DP-1800

PRESCRIBE Command Reference 14 ALTB A — [ALlocate TaBle] Assign user-defined character table Format ALTB A, table-id; Parameter table-id: number identifying the character table assigned to the resident font, from 1 to 65535 Function The ALT...

[Page 25] Kyocera DP-1800

ALTB C 15 ALTB C — [ALlocate TaBle] Convert character code Format ALTB C, table-id, source-character, target-character; Parameters table-id: number identifying the character table to convert the character, from 1 to 65535 source-character: ch...

[Page 26] Kyocera DP-1800

PRESCRIBE Command Reference 16 ALTB D — [ALlocate TaBle] Delete user-defined character table Format ALTB D, table-id; Parameter table-id: number identifying the character table, from 1 to 65535, to be deleted Function The ALTB D command delet...

[Page 27] Kyocera DP-1800

ALTB E 17 ALTB E — [ALlocate TaBle] End defining combination characters Format ALTB E; Parameter None Function This command signals the end of defining combination characters in an already generated user-defined character table which was s...

[Page 28] Kyocera DP-1800

PRESCRIBE Command Reference 18 ALTB G — [ALlocate TaBle] Generate user-defined table Format ALTB G, table-id, table-format; Parameters table-id: table ID number: 1 to 65535 table-format: 1 = 1-byte, character codes 0 to 255 2 = 2-byte, c...

[Page 29] Kyocera DP-1800

ALTB R 19 ALTB R — [ALlocate TaBle] Release user-defined character table Format ALTB R, table-id; Parameter table-id: number identifying the character table to be released Function The ALTB R command terminates the assignment of the user-de...

[Page 30] Kyocera DP-1800

PRESCRIBE Command Reference 20 ALTB S — [ALlocate TaBle] Start to define the combination character Format ALTB S, table-id, code[, width, height[[, x-coordinate, y-coordinate, [paint-mode]]]; Parameters table-id: number identifying the char...

[Page 31] Kyocera DP-1800

ALTB T 21 ALTB T — [ALlocate TaBle] define combined character by Table Format ALTB T, character-code, width, height, x-coordinate, y-coordinate; Parameters code: character code for which the combined character is defined, or hexadecimal not...

[Page 32] Kyocera DP-1800

PRESCRIBE Command Reference 22 File !R! res; unit c; SFNT ’TimesNewRoman’, 48; ALTB G, 1000, 1; ALTB A, 1000; ALTB S, 1000, 64, 1800, 1000; ALTB T, 77, 700, 700, 0, 700; CMNT M; ALTB T, 65, 700, 700, 630, 700; CMNT A; ALTB T, 85, 700, 700, 1050,...

[Page 33] Kyocera DP-1800

ALTF 23 ALTF — change to ALTernate Font Format ALTF alternate-number; Parameter alternate-number: a number from 0 to 47 Function The ALTF command changes the current font to a font designated by an alternate number. The actual font assigned ...

[Page 34] Kyocera DP-1800

PRESCRIBE Command Reference 24 File !R! RES; SFNT "Helvetica-Nr", 12, 1000; SFNT "TimesNewRoman-It", 11, 1001; SETF 1, 1000; SETF 2, 1001; MCRO BIBLIO; ALTF 1; TEXT %1, E; TEXT " ", E; ALTF 2; TEXT %2, E; TEXT ...

[Page 35] Kyocera DP-1800

AMCR 25 AMCR — call Automatic MaCRo Format AMCR mode, [repeat-count] macro-name, parameter, ...; Parameters mode: E = Enable automatic macro; Save and retain current printing parameters T = Enable automatic macro; Do not save current printing ...

[Page 36] Kyocera DP-1800

PRESCRIBE Command Reference 26 File !R! RES; MCRO CROPMARK; UNIT C; MZP 2.46, 3.96; SCP; SCP; SCP; MRP -.635, 0; DRP -1.9, 0; RPP; MRP 0, -.635; DRP 0, -1.9; RPP; MRP 14.85, 0; SCP; SCP; MRP .635, 0; DRP 1.9, 0; RPP; MRP 0, -.635; DRP 0, -1....

[Page 37] Kyocera DP-1800

APSG 27 APSG — Assign Paper Source Group Format APSG group # (cassette 1), group # (cassette 2), ...group # (cassette 6); Parameters group #: Number representing the group to which the cassette is grouped, from the top (1) towards the bottom (6) c...

[Page 38] Kyocera DP-1800

PRESCRIBE Command Reference 28 ARC — draw filled-in ARC Format ARC inner-radius, outer-radius, start-angle, end-angle; Parameters inner-radius: inner radius of arc outer-radius: outer radius of arc start-angle: starting angle end-angle: ...

[Page 39] Kyocera DP-1800

ARC 29 File !R! RES; UNIT C; MAP 5, 8; PAT 52; ARC 1, 2, -45, 45; MAP 5, 10; PIE 2, 0, 10, 20, 30; ARC 0, 2, 0, 60; PAT 20; ARC 0, 2, 60, 180; PAT 10; ARC 0, 2, 180, 360; PAT 1; NEWP; PMZP 4, 2; PARC 4, 3, 1, 90, 270; PARC 5, 4, 1, 18...

[Page 40] Kyocera DP-1800

PRESCRIBE Command Reference 30 Printout Related Command PARC ...

[Page 41] Kyocera DP-1800

ASFN 31 ASFN — ASsign external characters for FoNt Format ASFN mode, font-number; Parameters mode: A = assign external characters R = release external characters font-number: number identifying the external character font: 1000 to 65535 Fun...

[Page 42] Kyocera DP-1800

PRESCRIBE Command Reference 32 ASTK — Assign STacKer trays Format ASTK tray1, tray2, tray3, ...; Parameters tray1, tray2, tray3, ...: Number representing the tray in the optional sorter which becomes the last (bottom) tray in each group, as c...

[Page 43] Kyocera DP-1800

ASTK 33 File The following command sequence delivers print jobs to trays 4, 5, 6, and 7 (the second group). !R! FRPO S0, 1; CMNT Enter multiple sorter mode; ASTK 3, 7, 9; CMNT Create three groups; MID 2; CMNT Send the output to 2nd grp.; SSTK; ...

[Page 44] Kyocera DP-1800

PRESCRIBE Command Reference 34 BARC — draw BARCode Format BARC type, flag, ’string’[, short, tall [, bar1, bar2, bar3, bar4, space1, space2, space3, space4]]; Parameters type: There are the following barcode types: 0 = UPC A 1 = UPC A wit...

[Page 45] Kyocera DP-1800

BARC 35 43 = CUSTOM CODE (Japan) 1 44 = CODABAR with no check digit (wide gap) flag: Y = Print the string under the barcode N = Do not print the string string: Text to be converted to a barcode. The text must be enclosed with single or double qu...

[Page 46] Kyocera DP-1800

PRESCRIBE Command Reference 36 Table 20 Characters that can be used Type Max Characters to be used Default 0 11 0123456789 0 1 13 0123456789 0 2 16 0123456789 0 3 13 0123456789 0 4 18 0123456789 0 5 22 0123456789 0 6 25 0123456789 0 7 29 0123456789 ...

[Page 47] Kyocera DP-1800

BARC 37 Length of the bars For the UPC and EAN (JAN) barcode type, the length of the short and tall bars can be adjusted. When adjusting the length of the tall or short bars, specify that of both tall and short bars. If the length of only the tall ...

[Page 48] Kyocera DP-1800

PRESCRIBE Command Reference 38 BKLT — print in BooKLeT binding Format BKLT binding; Parameter binding: number representing binding mode: 0 = None 1 = Left-to-right binding 2 = Right-to-left binding Function The BKLT command allows printing a job...

[Page 49] Kyocera DP-1800

BKLT 39 This command is not supported by some photocopier models. File The following command sequence prints a copy of a 12-page A4 document in booklet mode, folding the stack in the middle. The printing system will require A4-R paper to be loaded...

[Page 50] Kyocera DP-1800

PRESCRIBE Command Reference 40 BLK — draw filled-in BLocK Format BLK width, depth[, option]; Parameters width: width of the block depth: depth of the block option: B = Leave the cursor unmoved (Default) H = Move the cursor to the horizonta...

[Page 51] Kyocera DP-1800

BLK 41 File !R! RES; UNIT C; MAP 5, 5; PAT 20; BOX 4, 1; BLK 4, 1; MRP 0, 1.5; BOX 4, 1; BLK 4, 1; MRP .9, .6; SFNT "Helvetica-Nr"; TEXT ’OVERPRINTING’; MRP 0, 5; PAT 29; BOX 1, -4; BLK 1, -4, H; PAT 39; BOX 1, -3; BLK 1, -3...

[Page 52] Kyocera DP-1800

PRESCRIBE Command Reference 42 BOX — draw BOX Format BOX width, depth[, option]; Parameters width: width of the box depth: depth of the box option: B = Leave the cursor unmoved (Default) H = Move the cursor to the horizontally adjacent cor...

[Page 53] Kyocera DP-1800

BOX 43 MAP 4, 0; SCP; SFNT "Helvetica-Nr", 10; BOX 4, 2, L; TEXT ’Text printed with option L’; RPP; BOX 4, 2, N; TEXT ’Text printed with option N’; PAGE; EXIT; Printout ...

[Page 54] Kyocera DP-1800

PRESCRIBE Command Reference 44 CALL — CALL macro Format CALL[ repeat-count] macro-name, parameter-value, ...; Parameters repeat-count: number of times the macro is to be executed macro-name: name defined by a MCRO command parameter-values: ...

[Page 55] Kyocera DP-1800

CALL 45 File !R! RES; UNIT C; SLS .5; CMNT Requires BX and SCREEN macros; CMNT See ENDM command page; MAP 9, 3; CALL BX; MAP 7, 4; CALL 5 BX; MAP 5, 5; CALL 9 BX; MAP 8, 6; CALL SCREEN, 2.2, 1.7; MAP 8.6, 7; TEXT ’Narrow’, L; TEXT ’sc...

[Page 56] Kyocera DP-1800

PRESCRIBE Command Reference 46 CCPY — Carbon CoPY Format CCPY mode; Parameter mode: E = enable carbon copy D = disable carbon copy Function The CCPY command continuously executes different automacros using different paper sources, enabling to ...

[Page 57] Kyocera DP-1800

CCPY 47 File !R! RES; DAM; CCPY D; UNIT C; MCRO COVER; UNIT C; SFNT 'Helvetica-Bd',14; TEXT 'Registration Form', L; SFNT 'Helvetica', 9; TEXT 'Please provide your personal details:'; MRP 0, .2; BOX 6, 1; MR...

[Page 58] Kyocera DP-1800

PRESCRIBE Command Reference 48 Printout ...

[Page 59] Kyocera DP-1800

CDSK 49 CDSK — Check hard DiSK Format CDSK; Parameter None Function The CDSK command verifies data in the hard disk (garbage collection). It deletes garbage jobs such as page image data that were accidentally generated in the hard disk and nor...

[Page 60] Kyocera DP-1800

PRESCRIBE Command Reference 50 COLOR CID — Configure color-Image Data Format CID color-space, encoding; Parameters color-space: 0 = Device-dependent RGB (Default) 1 = Device-dependent CMY 2 = Void 3 = CIE L*a*b encoding: Pixel encoding 1 =...

[Page 61] Kyocera DP-1800

CID 51 File !R! RES; DAM; UNIT C; SFNT ’Helvetica-Bd’, 20; CPAL C, 1; SPAL 1; CID 0, 1; CMNT RGB Color Space used; ACLI 1, 0, 0, 255; MZP 1, 1; SCOL 1; TEXT ’An RGB color palette is used.’ CID 3, 1; CMNT L*a*b Color Space used; ACLI 2, 100, ...

[Page 62] Kyocera DP-1800

PRESCRIBE Command Reference 52 CIR — draw CIRcle Format CIR radius; Parameter radius: radius of the circle Function In standard graphics mode, the CIR command draws a circle centered at the current cursor position. The line thickness used i...

[Page 63] Kyocera DP-1800

CIR 53 Printout ...

[Page 64] Kyocera DP-1800

PRESCRIBE Command Reference 54 CLIP — CLIP current path Format CLIP [clip-mode]; Parameter clip-mode: 1: EO clip 2: Non-zero winding clip Function The CLIP command sets the current path as the clipped path. After this command is issued, no...

[Page 65] Kyocera DP-1800

CLPR 55 CLPR — CLiP Rectangular area Format CLPR [x1, y1, x2, y2]; Parameters x1: x coordinate of the top-left corner of the rectangle y1: y coordinate of the top-left corner of the rectangle x2: x coordinate of the bottom-right corner of ...

[Page 66] Kyocera DP-1800

PRESCRIBE Command Reference 56 File !R! RES; UNIT C; NEWP; SPD 1; PMRA 6, 9, 3, 0; PAT 1; PARC 6, 9, 3, 0, 360; CLPR 3, 6, 9, 12; STRK; PAGE; EXIT; Printout ...

[Page 67] Kyocera DP-1800

CLSP 57 CLSP — CLoSe Path Format CLSP; Parameter None Function The CLSP command closes an open path by adding a line segment extending from the end of the path to the beginning of the path. Simply ending a path at the path’s starting point...

[Page 68] Kyocera DP-1800

PRESCRIBE Command Reference 58 Printout Related Command NEWP ...

[Page 69] Kyocera DP-1800

CMNT 59 CMNT — CoMmeNT Format CMNT string; Parameter string: any character string Function The CMNT command adds a character string, typically a comment explaining the purpose of the following PRESCRIBE commands. The CMNT command statement w...

[Page 70] Kyocera DP-1800

PRESCRIBE Command Reference 60 COLOR CMOD — Color MODe Format CMOD mode; Parameter mode: color mode: 0 = Monochrome 1 = Color (Default) Function The CMOD command switches between monochrome and color modes. In monochrome mode, other color c...

[Page 71] Kyocera DP-1800

COPY 61 COPY — set number of COPIES Format COPY number; Parameter number: number of copies Function The COPY command designates the number of copies for each page in a print job. This copy count value can be changed by sending the printing ...

[Page 72] Kyocera DP-1800

PRESCRIBE Command Reference 62 Printout ...

[Page 73] Kyocera DP-1800

CPAL 63 COLOR CPAL — Control PALette Format CPAL mode[, palette-id]; Parameters mode: palette control mode: A = Delete all palettes S = Delete all stacked palettes D = Delete the palette having the specified ID C = Copy the ac...

[Page 74] Kyocera DP-1800

PRESCRIBE Command Reference 64 CPTH — Character PaTH Format CPTH ’string’; Parameter string: any character string except from ASCII code 31 (hex 1F) and lower Function The CPTH command constructs a path which adds the outlines of charact...

[Page 75] Kyocera DP-1800

CSET 65 CSET — Change symbol SET by symbol-set ID Format CSET symbol-set-id; Parameter symbol-set-id: symbol set ID: 0D = ISO 60 Norway 0E = Roman Extension 0F = ISO 25 French 0G = HP German 0I = ISO 15 Italian 0K = ISO 14 JIS ASCII 0N =...

[Page 76] Kyocera DP-1800

PRESCRIBE Command Reference 66 9R = Windows 3.1 Latin/Cyrillic 9T = PC-Turkish 9U = Windows 3.0 10G = PC-851 Latin/Greek 10J = PS Text 10N = ISO8859/5 Latin/Cyrillic 10R = PC-855 Cyrillic/Serbia 10U = IBM PC-8 11G = PC-869 Latin/Greek 11U = ...

[Page 77] Kyocera DP-1800

CSET 67 Function ‘Symbol set’ refers to a specific group of alphabetic, numeric, and symbolic characters. The CSET command summons the symbol set to suit the various languages with the current font. The factory default symbol set is 0U (US ASC...

[Page 78] Kyocera DP-1800

PRESCRIBE Command Reference 68 CSTK — select Collator STacKer Format CSTK [tray, tray, ...]; or CSTK 0; Parameter tray: number from 1 to the maximum (bottom) Function The CSTK command is effective only when the optional sorter is installed t...

[Page 79] Kyocera DP-1800

CTXT 69 CTXT — print Centered TeXT Format CTXT [,string][,option][,U-option]; Parameters string: any character string option: B = Leave cursor at center of string E = Move cursor at end of string L = Move cursor down one line N = Move cur...

[Page 80] Kyocera DP-1800

PRESCRIBE Command Reference 70 Printout ...

[Page 81] Kyocera DP-1800

DAF 71 DAF — Delete All Fonts Format DAF; Parameter None Function The DAF command deletes all nonresident fonts and the font numbers assigned to scalable fonts by the SFNT command from the printing system’s memory. This enables the user t...

[Page 82] Kyocera DP-1800

PRESCRIBE Command Reference 72 DAM — Delete All Macros Format DAM; Parameter None Function The DAM command deletes all macro definitions made by using the PRESCRIBE MCRO command from the printing system’s memory. This enables the user to ma...

[Page 83] Kyocera DP-1800

DAP 73 DAP — Draw to Absolute Position Format DAP x-coordinate, y-coordinate; Parameters x-coordinate: distance from the left margin y-coordinate: distance from the top margin Function The DAP command draws a line from the current cursor p...

[Page 84] Kyocera DP-1800

PRESCRIBE Command Reference 74 Printout ...

[Page 85] Kyocera DP-1800

DELF 75 DELF — DELete Font Format DELF font-number; Parameter font-number: number identifying the font to be deleted Function The DELF command deletes any designated non-resident font from the printing system’s memory. This enables the use...

[Page 86] Kyocera DP-1800

PRESCRIBE Command Reference 76 DELM — DELete Macro Format DELM macro-name; Parameter macro-name: name defined by a previous MCRO command Function The DELM command deletes a specified macro definition from the printing system’s memory to ma...

[Page 87] Kyocera DP-1800

DELM 77 File !R! UNIT C; MCRO BX; SPD .05; BOX .8, -.8; MRP 1, 0; ENDM; MCRO SCREEN %, width, depth; CMNT Draws box with rounded corners; CMNT Leaves cursor at previous position; SPD .08; SCP; MRP .25, .25; ARC .23, .30, 270, 0; MRP 0, -.2...

[Page 88] Kyocera DP-1800

PRESCRIBE Command Reference 78 DPAT — select Dashed PATtern Format DPAT number; Parameter number: number from 1 to 20 (11 to 20 are for user-defined patterns.) Function The DPAT command specifies the pattern of alternating black and white das...

[Page 89] Kyocera DP-1800

DPAT 79 Printout Related Command SDP ...

[Page 90] Kyocera DP-1800

PRESCRIBE Command Reference 80 DRP — Draw to Relative Position Format DRP x-coordinate, y-coordinate, ...; Parameter x-coordinate/y-coordinate: coordinates as measured from the current cursor position Function The DRP command draws a line fr...

[Page 91] Kyocera DP-1800

DRP 81 Printout Related Command PDRP ...

[Page 92] Kyocera DP-1800

PRESCRIBE Command Reference 82 DRPA — Draw to Relative Position specified by Angle Format DRPA length, angle; Parameters length: length of the line angle: angle in degrees, measured clockwise from the vertical Function The DRPA command d...

[Page 93] Kyocera DP-1800

DRPA 83 Printout ...

[Page 94] Kyocera DP-1800

PRESCRIBE Command Reference 84 DUPX — select/deselect DUPleX mode Format DUPX mode; Parameter mode: a number representing one of the following binding mode: 0 = simplex mode 1 = duplex mode, long-edge binding 2 = duplex mode, short-edge bindin...

[Page 95] Kyocera DP-1800

DXPG 85 DXPG — select DupleX PaGe side Format DXPG side; Parameter side: a number representing the side of the ensuing page: 0 = Select next side (the same as form feed) 1 = Select front side 2 = Select back side Function The DXPG command is...

[Page 96] Kyocera DP-1800

PRESCRIBE Command Reference 86 File The following example selects the duplex mode with short-edge binding, a portrait page orientation which results in text printing on both sides of the page. !R! CMNT Initiates a PRESCRIBE command sequence; RES; ...

[Page 97] Kyocera DP-1800

DZP 87 DZP — Draw to Zero-relative Position Format DZP x-coordinate, y-coordinate; Parameters x-coordinate: distance from the left edge limit of paper y-coordinate: distance from the top edge limit of paper Function The DZP command draws a ...

[Page 98] Kyocera DP-1800

PRESCRIBE Command Reference 88 Printout Related Command PDZP ...

[Page 99] Kyocera DP-1800

EMCR 89 EMCR — Enable MaCRo depending on paper source Format EMCR mode, paper-source [ = print-side], [repeat-count] macro-name [, parameter...]; Parameters mode: E = enable automatic macro D = disable automatic macro paper-source: 0 = mult...

[Page 100] Kyocera DP-1800

PRESCRIBE Command Reference 90 Function The EMCR command allows separate auto macros to be assigned for each of the separate paper sources. In duplex printing, it is also possible to assign separate auto macros for both the front and back sides of...