Download or browse on-line these Owner's Manual for Marcy MP-3500 Home Gym.
This manual for Marcy MP-3500, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 31 pages, and the size of the file at download is . The document type is Owner's Manual.
[Page 1] Marcy MP-3500
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model MP-3500 Retain T...
[Page 2] Marcy MP-3500
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE PACK…�...
[Page 3] Marcy MP-3500
IMPORTANT SAFETY PRECAUTIONS This Gym is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or use your Gym. In particular, n...
[Page 4] Marcy MP-3500
WARNING LABEL PLACEMENT 3 ...
[Page 5] Marcy MP-3500
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 4 ...
[Page 6] Marcy MP-3500
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 5 (Qty 74) ...
[Page 7] Marcy MP-3500
HARDWARE PACK 6 ...
[Page 8] Marcy MP-3500
ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) ...
[Page 9] Marcy MP-3500
DIAGRAM 1 8 ...
[Page 10] Marcy MP-3500
STEP 2 (See Diagram 2) A.) Attach the Upper Frame (#1) onto the two Guide Rods (#17). Secure it with two M10 x ¾” Allen Bolts (#103) and ∅ ¾” Washers (#111). DO NOT tighten the Bolts yet. B.) Place the Upper Frame onto the Vertical Fram...
[Page 11] Marcy MP-3500
STEP 3 (See Diagram 3) A.) Attach the Front Press Base (#2) to the Upper Frame (#1). Secure it with one 6 ¾” Front Press Base Axle (#29), two Ø 1 ¼” Washers (#70), and two M10 Aircraft Nuts (#109). B.) Attach the Front Press (#3) t...
[Page 12] Marcy MP-3500
DIAGRAM 3 11 ...
[Page 13] Marcy MP-3500
STEP 4 (See Diagram 4) A.) Attach the Seat Pad (#88) to the Seat Post (#6). Secure it with two M8 x 1 5/8” Allen Bolts (#113) and Ø 5/8” Washers (#112). B.) Insert the Seat Post into the opening on the Seat Support Frame (#7). Thread th...
[Page 14] Marcy MP-3500
DIAGRAM 4 13 ...
[Page 15] Marcy MP-3500
STEP 5 (See Diagram 5) A.) Slide the Right Butterfly (#10) onto the right axle on the Butterfly Base (#13). B.) Insert the Butterfly Handle (#9) into the pivot on the Right Butterfly. Secure it with one M10 x ¾” Allen Bolt (#103) and ∅ 1 ¼...
[Page 16] Marcy MP-3500
STEP 6 (See Diagram 6 & Upper Cable Loop Diagram) A.) Attach the 167” Upper Cable (#42) to the opening on the front of Upper Frame (#1). Make sure the ball stopper is underneath the Frame. Attach a Pulley (#44) to the Cable. B.) Secu...
[Page 17] Marcy MP-3500
DIAGRAM 6 16 ...
[Page 18] Marcy MP-3500
Upper Cable Loop Diagram 17 ...
[Page 19] Marcy MP-3500
STEP 7 (See Diagram 7 & Lower Cable Loop Diagram) A.) Attach the 215” Lower Cable (#40) to the opening on the Leg Developer (#8). Attach a Pulley (#44) to the opening. Secure it with one M10 x 2 ½” Allen Bolt (#98), two ∅ 7/8”...
[Page 20] Marcy MP-3500
DIAGRAM 7 19 ...
[Page 21] Marcy MP-3500
Lower Cable Loop Diagram 20 ...
[Page 22] Marcy MP-3500
STEP 8 (See Diagram 8 & Butterfly Cable Loop Diagram) A.) Clip one end of the 83” Butterfly Cable (#41) to the open slot on the Right Butterfly (#10). B.) Draw the Cable to the open bracket on the right side of the Vertical Frame (#4). ...
[Page 23] Marcy MP-3500
22 ...
[Page 24] Marcy MP-3500
Butterfly Cable Loop Diagram 23 ...
[Page 25] Marcy MP-3500
STEP 9 (See Diagram 9) A.) Connect the Lat Bar (#24) to the 167” Upper Cable (#42) with two Hooks (#90) and one Short Chain (#75). B.) Attach the Abdominal Strap (#85) to the U-shaped Cable Connector (#48) on the 215” Lower Cable (#40) wit...
[Page 26] Marcy MP-3500
STEP 10 (See Diagram 10) A.) Attach one end of 75” Hip-Thigh Cable (#39) to the bracket on the Rotating Cam Plate (#32). Secure it with one M10 x 1” Allen Bolt (#102), two Ø ¾” Washers (#111), and one M10 Aircraft Nut (#109). B.) Attach t...
[Page 27] Marcy MP-3500
Hip-Thigh Cable Loop Diagram 26 ...
[Page 28] Marcy MP-3500
STEP 11 (See Diagram 11) A.) Attach the two Weight Stack Covers (#46) To Upper Frame (#1) and Rear Base Frame (#15) from each side. B.) Secure the Weight Stack Covers to the Upper Frame and Rear Base Frame with four M10 x ¾” Allen Bolts (#10...
[Page 29] Marcy MP-3500
WEIGHT RESISTANCE CHART WEIGHT PLATE Station 1 2 3 4 5 6 7 8 9 Low Pulley 9 13.5 18 22.5 27 31.5 36 40.5 45 Lat Pull 13.5 18 22.5 27 31.5 36 40.5 45 49.5 Butterfly 4.5 6.75 9 11.25 13.5 15.75 18 20.25 ...
[Page 30] Marcy MP-3500
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Upper Frame 1 61 5 3/8” Grip 6 2 Front Press Base 1 62 Ø 1” End Cap 5 3 Front Press 1 63 2” x 2” End Cap 2 4 Vertical Frame 1 64...
[Page 31] Marcy MP-3500
LIMITED WARRANTY Escalade warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the frame and one year on all other parts and components from the date...
Assembly manual (25 pages)
Owner's manual (28 pages)
Owner's manual (13 pages)
Brochure (1 pages)
Owner's manual (21 pages)