Mazda 2008 6 Owner's Manual

[Page 1] Mazda 2008 Mazda6

Black plate (1,1) Mazda6_8X47-EA-07G_Edition1 Page1 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G ...

[Page 2] Mazda 2008 Mazda6

Black plate (2,1) Mazda6_8X47-EA-07G_Edition1 Page2 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G ...

[Page 3] Mazda 2008 Mazda6

Black plate (3,1) Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind. To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommen...

[Page 4] Mazda 2008 Mazda6

Black plate (4,1) We want to help you get the most driving pleasure from your vehicle. Your owner's manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy yo...

[Page 5] Mazda 2008 Mazda6

Black plate (5,1) Mazda6_8X47-EA-07G_Edition1 Page5 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G Table of Contents Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. 1 Essential Safety Equipment Use of safety...

[Page 6] Mazda 2008 Mazda6

Black plate (6,1) Mazda6_8X47-EA-07G_Edition1 Page6 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G ...

[Page 7] Mazda 2008 Mazda6

Black plate (7,1) 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard and Interior Overview ...... ........................................ 1-2 Exterior Overview ................................. ........

[Page 8] Mazda 2008 Mazda6

Black plate (8,1) *Refer to Navigation System at the end of the manual (if equipped). Power window lock switch ................................................................................ page 3-26 Power window switches .......... ..................

[Page 9] Mazda 2008 Mazda6

Black plate (9,1) Dashboard illumination ..................................................................................... page 5-34 TCS-OFF switch ................................................................................................ p...

[Page 10] Mazda 2008 Mazda6

Black plate (10,1) Sedan/5-Door 1-4 Your Vehicle at a Glance The equipment and installation position varies by vehicle Exterior Overview Mazda6_8X47-EA-07G_Edition1 Page10 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G ...

[Page 11] Mazda 2008 Mazda6

Black plate (11,1) Trunk lid .................................. .......................................................................... page 3-19 Hatch ..................................................................................................

[Page 12] Mazda 2008 Mazda6

Black plate (12,1) Sport Wagon 1-6 Your Vehicle at a Glance The equipment and installation position varies by vehicle Exterior Overview Mazda6_8X47-EA-07G_Edition1 Page12 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G ...

[Page 13] Mazda 2008 Mazda6

Black plate (13,1) Liftgate .............................................................................................................. page 3-13 Antenna ................................................................................................

[Page 14] Mazda 2008 Mazda6

Black plate (14,1) 1-8 Mazda6_8X47-EA-07G_Edition1 Page14 Tuesday, May 29 2007 3:42 PM Form No.8X47-EA-07G ...

[Page 15] Mazda 2008 Mazda6

Black plate (15,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats .................................................................................................

[Page 16] Mazda 2008 Mazda6

Black plate (16,1) Front Seats (Manually Operated Seats) WARNING Do not modify or replac e the front seats: Modifying or repla cing the front seats such as replacing the upholstery or loosening any bolts is dangerous. The front seats contain air bag ...

[Page 17] Mazda 2008 Mazda6

Black plate (17,1) qSeat Recline WARNING Do not drive with the seats reclined: Sitting in a reclined position while the vehicle is moving is dangerous because you don't get the full protection from seat belts. During sudden braking or a collisio...

[Page 18] Mazda 2008 Mazda6

Black plate (18,1) CAUTION When returning a rear-reclined seatback to its upright position, make sure you hold onto the seatback with your other hand while operating the lever. If the seatback is not supported, it will flip forward suddenly and could...

[Page 19] Mazda 2008 Mazda6

Black plate (19,1) NOTE The seat temperature is regulated automatically by a thermostat. Other than turning it on or off, it cannot be adjusted. Front Seats (Electrically Operated Seats) WARNING Do not modify or replac e the front seats: Modifying or...

[Page 20] Mazda 2008 Mazda6

Black plate (20,1) CAUTION Ø The seat-bottom power adjustment is operated by motors. Avoid extended operation because excessive use can damage the motors. Ø To prevent the battery from running down, avoid using the power adjustment when the engine ...

[Page 21] Mazda 2008 Mazda6

Black plate (21,1) Change the seatback angle by pressing the front or rear side of the reclining switch. Release the switch at the desired position. q Height Adjustment (Driver's Seat) The seat height can be adjusted by moving the switch up or d...

[Page 22] Mazda 2008 Mazda6

Black plate (22,1) To raise a head restraint, pull it up to the desired position. To lower the head restraint, press the stop- catch release, then push the head restraint down. Adjust the head restraint so that the top is even with the top of the pas...

[Page 23] Mazda 2008 Mazda6

Black plate (23,1) Rear Seat WARNING Do not stack cargo higher than the seatbacks or place articles on the rear package tray or on the luggage compartment cover: Stacking luggage or other cargo higher than the seatbacks, and placing articles on the r...

[Page 24] Mazda 2008 Mazda6

Black plate (24,1) NOTE When returning a rear seat to its original position, also replace the seat belt to its normal position. Verify that the seat belt pulls out and retracts. q Split-Folding Rear Seatback (Sedan) The seatbacks can be folded down t...

[Page 25] Mazda 2008 Mazda6

Black plate (25,1) 2. After checking that the rear seats are clear, open the trunk and pull the remote handle lever s on the left and right side of the trunk. To return the seatbacks to the upright position 1. Lift the seatbacks upright. 2. Pull on t...

[Page 26] Mazda 2008 Mazda6

Black plate (26,1) To fold down the rear seatbacks and slide forward seat bottoms WARNING Always remove the child-restraint system from the rear seat before operating the remote handle levers for the rear seat: Operating the remote handle levers whil...

[Page 27] Mazda 2008 Mazda6

Black plate (27,1) When using the rear seatback knobs: CAUTION When operating th e rear seatback knob, make sure you support the seatback with your hand. If the seatback is not supported with your hand, it will flip forward suddenly and could cause i...

[Page 28] Mazda 2008 Mazda6

Black plate (28,1) qHead Restraint (5-Door/Sport Wagon) WARNING Always drive with the head restraints installed when seats are being used and make sure they are properly adjusted: Driving with the head restraints adjusted too low or rem oved is dange...

[Page 29] Mazda 2008 Mazda6

Black plate (29,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are d...

[Page 30] Mazda 2008 Mazda6

Black plate (30,1) WARNING Always wear your seat belt and make sure all occupants are properly restrained: Not wearing a seat belt is extremely dangerous. During a collision, occupants not wearing seat belts could hit someone or things inside the veh...

[Page 31] Mazda 2008 Mazda6

Black plate (31,1) CAUTION Belt retraction may become difficult if the belts and rings are soiled, so try to keep them clean. For more details abou t cleaning the seat belts, refer to “Cleaning the Lap/Shoulder Belt Webbing” (page 8-58). qPregnan...

[Page 32] Mazda 2008 Mazda6

Black plate (32,1) qAutomatic Locking Mode Always use the automatic locking mode to keep the child-restraint system from shifting to an unsafe position in the event of an accident. To enable seat belt automatic locking mode, pull it all the way out a...

[Page 33] Mazda 2008 Mazda6

Black plate (33,1) Seat Belt (Except Center- Rear Position) NOTE When using the center-rear seat belt, refer to “Center-Rear Position Seat Belt” (page 2-23). qFastening the Seat Belts 1. Grasp the tongue. 2. Slowly pull out the lap/shoulder belt....

[Page 34] Mazda 2008 Mazda6

Black plate (34,1) qUnfastening the Seat Belts Depress the button on the buckle. If the belt does not fully retract, pull it out and check for kinks or twists. Then make sure it rema ins untwisted as it retracts. Button NOTE If a belt does not fully ...

[Page 35] Mazda 2008 Mazda6

Black plate (35,1) Front Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wea...

[Page 36] Mazda 2008 Mazda6

Black plate (36,1) Have your seat belts changed immediately if the pretensioner or load limiter has been expended: One or both front air bags may deploy, and the corresponding pretensioner(s) may also deploy at the same time. While it is safer to use...

[Page 37] Mazda 2008 Mazda6

Black plate (37,1) q Air Bag/Front Seat Belt Pretensioner Systems Warning Light If the air bag/front seat belt pretensioner system is working properly, the warning light illuminates when the ignition switch is turned to the ON position or after the e...

[Page 38] Mazda 2008 Mazda6

Black plate (38,1) WARNING Fastening the Center-Rear Seat Belt with Only One Buckle: Fastening the center-rear seat belt with only one buckle is dangerous. If only one pair of seat belt tongue and buckle, either tongue (A) and anchor buckle (B) or to...

[Page 39] Mazda 2008 Mazda6

Black plate (39,1) CAUTION Always unfasten the lap portion of the belt before folding the left-rear seatback. Leaving the lap portion of the belt fastened could cause damage to the seat belt, buckle and seatback. NOTE To encourage rear seat passenger...

[Page 40] Mazda 2008 Mazda6

Black plate (40,1) Sport Wagon To stow the seat belt, retract the belt, put tongues (A) and (C) together and insert them into the ceiling recess. (A) (C) Ceiling recess To pull out the seat belt, slide tongue (A) with your finger while moving it down...

[Page 41] Mazda 2008 Mazda6

Black plate (41,1) WARNING Do not use a seat belt extender unless it is necessary: Using a seat belt extender when not necessary is dangerous. The seat belt will be too long and not fit properly. In an accident, the seat belt will not provide adequat...

[Page 42] Mazda 2008 Mazda6

Black plate (42,1) Seat Belt Warning Light/Beep The seat belt warning light illuminates and a beep sound will be heard if the driver's seat belt is not fastened when the ignition switch is turned to the ON position. Conditions of operation Condi...

[Page 43] Mazda 2008 Mazda6

Black plate (43,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to use them. You are required by law to use a child -restraint system for children in the U.S. and Canada. Check your loc...

[Page 44] Mazda 2008 Mazda6

Black plate (44,1) WARNING Use the correct size child-restraint system: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not,...

[Page 45] Mazda 2008 Mazda6

Black plate (45,1) Seating a child in a child-restraint system on the front passenger seat is dangerous: Vehicles equipped with front passen ger seat weight sensors are also equipped with a front passenger air bag deactivation indicator light (page 2...

[Page 46] Mazda 2008 Mazda6

Black plate (46,1) Never use one seat belt on more than one person at a time: Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way cannot spread the impact forces properly and the two passengers could be c...

[Page 47] Mazda 2008 Mazda6

Black plate (47,1) Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seat. The front passenger's seat is clearly the worst choice for any child under 12, and with rear-facing child- restraint systems...

[Page 48] Mazda 2008 Mazda6

Black plate (48,1) 4. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possi ble. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the b...

[Page 49] Mazda 2008 Mazda6

Black plate (49,1) Tether strap position (5-Door/Sport Wagon) Tether strap Route between head restraint upright. WARNING Use the tether and tether anchor only for a child-restraint system: Using the tether or tether ancho r to secure anything but a c...

[Page 50] Mazda 2008 Mazda6

Black plate (50,1) Tether strap position (Sport Wagon) Anchor bracket Tether strap WARNING Use the tether and tether anchor only for a child-restraint system: Child-restraint system anchorages are designed to withstand only those loads imposed by cor...

[Page 51] Mazda 2008 Mazda6

Black plate (51,1) WARNING Always move the front passenger seat as far back as possible if installing a front-facing child-restraint system on it is unavoidable: As your vehicle has front air bags and doubly so if your vehicle has side air bags, a fr...

[Page 52] Mazda 2008 Mazda6

Black plate (52,1) 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the manufacturer's instructions on the child-restraint system for belt routing instructions. 3. To get the retractor into the automatic lo...

[Page 53] Mazda 2008 Mazda6

Black plate (53,1) WARNING Do not seat a child in a child-restraint system on the front passenger seat if the front passenger air bag deactivation indicator light does not illuminated: While it is always better to install any child-restraint system o...

[Page 54] Mazda 2008 Mazda6

Black plate (54,1) LATCH Child-Restraint Systems Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise the seat will bounce around and...

[Page 55] Mazda 2008 Mazda6

Black plate (55,1) qLATCH Child-Restraint System Installation Procedure (Rear Outboard Seats) 1. Make sure the seatback is securely latched by pushing it back until it is fully locked. 2. Expand the area between the seat bottom and the seatback sligh...

[Page 56] Mazda 2008 Mazda6

Black plate (56,1) Tether strap position (5-Door/Sport Wagon) Tether strap Route between head restraint upright. WARNING Use the tether and tether anchor only for a child-restraint system: Using the tether or tether ancho r to secure anything but a c...

[Page 57] Mazda 2008 Mazda6

Black plate (57,1) WARNING Use the tether and tether anchor only for a child-restraint system: Using the tether or tether ancho r to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor an...

[Page 58] Mazda 2008 Mazda6

Black plate (58,1) Anchor bracket location and tether strap position (5-Door) Tether strap Anchor bracket Anchor bracket location and tether strap position (Sport Wagon) Anchor bracket Tether strap 2-44 Essential Safety Equipment Child Restraint Mazd...

[Page 59] Mazda 2008 Mazda6

Black plate (59,1) Supplemental Restraint Systems (SRS) Precautions The front and side supplemental restraint systems (SRS) include up to 6 air bags. Please verify which kinds of air bags are equipped on your vehicle by locating the “SRS AIRBAG” ...

[Page 60] Mazda 2008 Mazda6

Black plate (60,1) WARNING Seat belts must be worn in air bag equipped vehicles: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected...

[Page 61] Mazda 2008 Mazda6

Black plate (61,1) Sit in the center of the seat and wear seat belts properly: Sitting too close to the side air bag modules or placing hands on them is extremely dangerous. The side air bags inflate with great force and speed directly out of the out...

[Page 62] Mazda 2008 Mazda6

Black plate (62,1) Do not touch the components of the supplemental restraint system after the air bags have inflated: Touching the components of the supplemental restraint system after the air bags have inflated is dangerous. Immediately after inflat...

[Page 63] Mazda 2008 Mazda6

Black plate (63,1) Supplemental Restraint System Components The supplemental restraint systems (SRS) have two basic subsystems: l The air bag system with inflators and air bags. l The electrical system with crash sensors and diagnostic module. The ai...

[Page 64] Mazda 2008 Mazda6

Black plate (64,1) qFront Air Bag System Components (1) (6) (10) (7) (6) (9) (5) (4) (3) (2) (8) (11) (1) Driver seat slide position sensor (page 2-52) (2) Front seats (3) Air bag/front seat belt pretension er system warning light (page 2-60) (4) Fro...

[Page 65] Mazda 2008 Mazda6

Black plate (65,1) qSide and Curtain Air Bag System Components Sedan/5-Door Sport Wagon (3) (1) (1) (4) (2) (4) (3) (1) (1) (2) (1) Side and curtain inflators and air bags (2) Front seats (3) Crash sensors and diagnostic module (SAS unit) (4) Side cr...

[Page 66] Mazda 2008 Mazda6

Black plate (66,1) How the Air Bags Work qHow the Front Air Bags Work When air bag crash sensors detect a frontal impact of greater than moderate force, an electrical current is sent to the inflators. Gases are produced to inflate the front air bags ...

[Page 67] Mazda 2008 Mazda6

Black plate (67,1) Front passenger seat weight sensors Your vehicle is equipped with the front passenger seat weight sensors (page 2-37). These sensors are located under both of the front passenger seat rails. These sensors determine the total seated...

[Page 68] Mazda 2008 Mazda6

Black plate (68,1) The front passenger air bag deactivation indicator light illuminates or is off under the following conditions: Total seated weight on the front passenger seat Front passenger air bag deactivation indicator light Front passenger fro...

[Page 69] Mazda 2008 Mazda6

Black plate (69,1) Do not increase the total seated weight on the front passenger seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passe nger seat from the total seated weight of ap...

[Page 70] Mazda 2008 Mazda6

Black plate (70,1) NOTE l The system requires about 10 seconds to alternate between turning the front passenger front and side air bags and seat belt pretensioner system on or off. l The front passenger air bag deactivation indicator light may illumi...

[Page 71] Mazda 2008 Mazda6

Black plate (71,1) qAir Bag Activation/Deactivation NOTE If the front passenger seat weight sensors detect a total seated weight on the front passenger seat is less than approximately 42 kg (93 lb), the front passenger front and side air bags and sea...

[Page 72] Mazda 2008 Mazda6

Black plate (72,1) l Frontal offset impact to the vehicle may not provide the stopping force necessary for air bag deployment. l Rear-ending or running under a truck's tail gate may not provide the stopping force necessary for air bag deployment...

[Page 73] Mazda 2008 Mazda6

Black plate (73,1) l Side impacts involving trees or poles can cause severe cosmetic damage but may not have enough impact force to activate the side and curta in air bags. l Vehicle roll-over may not provide enough side force to deploy the side and ...

[Page 74] Mazda 2008 Mazda6

Black plate (74,1) The diagnostic module continuously monitors the system's readiness. This begins when the ignition switch is turned to the ON position and continues while the vehicle is being driven. q Air Bag/Front Seat Belt Pretensioner Syst...

[Page 75] Mazda 2008 Mazda6

Black plate (75,1) WARNING Do not operate a vehicle with damaged air bag/seat belt pretensioner system components: Expended or damaged air bag/seat belt pretensioner system components must be replaced after any collision which caused them to deploy o...

[Page 76] Mazda 2008 Mazda6

Black plate (76,1) 2-62 Mazda6_8X47-EA-07G_Edition1 Page76 Tuesday, May 29 2007 3:43 PM Form No.8X47-EA-07G ...

[Page 77] Mazda 2008 Mazda6

Black plate (77,1) 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors an d Locks ........................................................................... 3-2 Keys ................

[Page 78] Mazda 2008 Mazda6

Black plate (78,1) Keys WARNING Do not leave the keys in your vehicle with children and keep them in a place where your children will not find or play with them: Leaving children in a vehicle with the key is dangerous. This could result in someone be...

[Page 79] Mazda 2008 Mazda6

Black plate (79,1) Keyless Entry System This system remotely locks and unlocks the doors and the hatch/liftgate, and opens the trunk lid, and opens the power windows. It can also help you signal for attention. Press the buttons slowly and carefully. ...

[Page 80] Mazda 2008 Mazda6

Black plate (80,1) 5-Door/Sport Wagon Lock button Unlock button Panic button Operation indicator light NOTE l (U.S.A.) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not c...

[Page 81] Mazda 2008 Mazda6

Black plate (81,1) NOTE (Without theft-deterrent system) The hazard warning lights will flash twice to indicate that all doors and the hatch/liftgate are unlocked. (With theft-deterrent system) l The hazard warning lights will not flash. l The hazard...

[Page 82] Mazda 2008 Mazda6

Black plate (82,1) 2. Insert a small screwdriver into the slot and push the tab to remove the key from the transmitter. Tab 3. Insert a small screwdriver into the slot and gently pry open the transmitter. 4. Press the portion of the battery indicated...

[Page 83] Mazda 2008 Mazda6

Black plate (83,1) CAUTION Radio equipment like this is governed by laws in the United States. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Door...

[Page 84] Mazda 2008 Mazda6

Black plate (84,1) Always close all the windo ws, lock the doors and take the key with you when leaving your vehicle unattended: (Except sedan) Leaving your vehicle unlocked is dangerous as children could lock themselves in a hot vehicle, which could...

[Page 85] Mazda 2008 Mazda6

Black plate (85,1) NOTE l Lockout prevention keeps you from locking the driver's door with the key in the ignition switch. If you try to lock the driver's door when the key is in the ignition switch and any door is open, the door lock immed...

[Page 86] Mazda 2008 Mazda6

Black plate (86,1) qRear Door Child Safety Locks These locks are intended to help prevent children from accidentally opening the rear doors. Use them both whenever a child rides in the vehicle. If you slide the child safety lock to the lock position ...

[Page 87] Mazda 2008 Mazda6

Black plate (87,1) qOpening and Closing the Hatch To open the hatch, pull up on the handle. NOTE If the vehicle battery is dead or there is a malfunction in the electrical system and the hatch cannot be unlocked, perform the following manual procedur...

[Page 88] Mazda 2008 Mazda6

Black plate (88,1) qLuggage Strap The luggage compartment can be accessed by opening the hatch when the straps are attached to the sides of the hatch. Strap qLuggage Compartment Cover WARNING Don't place anything on top of the cover: Placing lug...

[Page 89] Mazda 2008 Mazda6

Black plate (89,1) Liftgate (Sport Wagon) WARNING Never allow a person to ride in the luggage compartment: Allowing a person to ride in the luggage compartment is dangerous. The person in the luggage compartmen t could be seriously injured or killed ...

[Page 90] Mazda 2008 Mazda6

Black plate (90,1) NOTE If the vehicle battery is dead or there is a malfunction in the electrical system and the liftgate cannot be unlocked, perform the following procedure as an emergency measure to unlock it: 1. Remove the cap on the interior sur...

[Page 91] Mazda 2008 Mazda6

Black plate (91,1) 2. Set the right side of the retainer bar onto the retainer loop on the right side of the luggage compartment. Retainer loop 3. Slowly pull out the cover towards you and insert the cover ends into the hook retainers at the rear of ...

[Page 92] Mazda 2008 Mazda6

Black plate (92,1) NOTE The width of the net anchors can be shortened by pushing both sides inward. Net anchor Dividing the luggage compartment from the rear seat WARNING Do not use the luggage compartment net to secure objects in the luggage compart...

[Page 93] Mazda 2008 Mazda6

Black plate (93,1) 2. Slowly pull out the net in the upward direction, insert the left and right net anchors into the ceiling retainers, and slide them to the position indicated in the figure. Net anchor Net To remove the net: 1. Lift the net slightl...

[Page 94] Mazda 2008 Mazda6

Black plate (94,1) 2. Remove the retainer bar from the rear seatback position. 3. Insert the retainer bar anchors into the left side of each rear seatback retainer (back of the seatback). Retainer bar Rear seat Retainer 4. Slide the retainer bar in t...

[Page 95] Mazda 2008 Mazda6

Black plate (95,1) Trunk Lid (Sedan) WARNING Never allow a person to ride in the trunk: Allowing a person to ride in the trunk is dangerous. In addition, the person in the trunk could be seriously injured or killed during sudden braking or a collisio...

[Page 96] Mazda 2008 Mazda6

Black plate (96,1) Opening the trunk lid with the key Insert the key into the slot and turn it clockwise. Open Opening the trunk lid with the transmitter The trunk lid can be opened by operating the keyless entry system transmitter, refer to Keyless ...

[Page 97] Mazda 2008 Mazda6

Black plate (97,1) Inside Trunk Release Lever (Sedan) Your vehicle is equipped with an inside trunk release handle that provides a means of escape for children and adults in the event they become locked inside the trunk. No matter how careful adults ...

[Page 98] Mazda 2008 Mazda6

Black plate (98,1) qOpening the Trunk Lid from the Inside Slide the inside trunk release lever in the direction of the arrow. The lever is made of material that will glow for hours in the darkness of the trunk following a brief exposure to ambient li...

[Page 99] Mazda 2008 Mazda6

Black plate (99,1) q Operating the Front Power Windows NOTE l Each passenger power window can be operated with each door switch when the power window lock switch on the driver's door is in the unlocked position (page 3-26). l Each passenger powe...

[Page 100] Mazda 2008 Mazda6

Black plate (100,1) NOTE (POWER WINDOW INITIALIZATION PROCEDURE) If the battery was disconnected during vehicle maintenance, or for other reasons such as a switch continues to be operated after the window is fully open/close, the power windows will n...