Miele T 4819 Ci Operating Instructions Manual

Download or browse on-line these Operating Instructions Manual for Miele T 4819 Ci Dryer.

Miele T 4819 Ci Manual Information:

This manual for Miele T 4819 Ci, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 68 pages, and the size of the file at download is . The document type is Operating Instructions Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Miele T 4819 Ci. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Miele T 4819 Ci

Operating instructions for condenser tumble dryer T 4819 Ci To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 844 000 en-GB ...

[Page 2] Miele T 4819 Ci

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc are disposed of safely and kep...

[Page 3] Miele T 4819 Ci

Caring for the environment..........................................2 Warning and Safety instructions .....................................6 Operating the tumble dryer.........................................14 Control panel ............................

[Page 4] Miele T 4819 Ci

Cleaning and care ................................................26 Emptying the condensed water container ..............................26 Cleaning the fluff filters .............................................27 Cleaning them whilst dry ............

[Page 5] Miele T 4819 Ci

Fitting a door front panel made by another manufacturer...................46 Preparing the front panel .........................................46 Preparing the fixing points ........................................47 Fitting a plinth facing ...........

[Page 6] Miele T 4819 Ci

~ It is essential to read these instructions. This tumble dryer conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the tumble dryer, pl...

[Page 7] Miele T 4819 Ci

~ The tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are are supervised whilst using it or have been shown how to use it in a safe way and understand the haza...

[Page 8] Miele T 4819 Ci

Technical safety ~ Before setting up the tumble dryer, check it for any externally visible damage. Do not install or use a damaged tumble dryer. ~ Before connecting the tumble dryer, ensure that the connection data on the data plate (voltage and freq...

[Page 9] Miele T 4819 Ci

~ Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can the safety standards of the tumble dryer be guaranteed. ~ The tumble dryer must be isolated from the electricity supply in the event...

[Page 10] Miele T 4819 Ci

Correct use ~ To prevent the risk of fire, the following textiles must not be dried in this appliance: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, o...

[Page 11] Miele T 4819 Ci

~ Danger. This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device). If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust. ~...

[Page 12] Miele T 4819 Ci

~ The dryer must not be used without the fluff filters in place or if the fluff filters are damaged in any way. ~ The fluff filters must be cleaned regularly. ~ The dryer must not be used without the condenser unit in place. ~ The fluff filters must ...

[Page 13] Miele T 4819 Ci

Accessories ~ Only use genuine Miele original spare parts and accessories with this tumble dryer. If non-Miele parts are used, guarantee, performance and product liability claims may be invalidated. Miele cannot be held liable for damage caused by no...

[Page 14] Miele T 4819 Ci

Control panel a Low temperature button Delicate fabrics are dried at a lower temperature. b Drying level button with indicator lights to show the drying level selected. c Display See next page. d Delay start button This button is used for: - Delaying...

[Page 15] Miele T 4819 Ci

The display shows: – Programme duration – Programme stage Drying Cooling down Finish – Check and fault messages The following are also selected via the display: – Duration of the Warm air and Cool air programmes – Delay start You can select...

[Page 16] Miele T 4819 Ci

Garment care label symbols Drying q Normal/higher temperature r Reduced temperature: Select Low temperature (for delicate textiles) s Do not tumble dry Ironing I Very hot H Hot G Warm J Do not iron Tips on drying – Always observe the maximum recomm...

[Page 17] Miele T 4819 Ci

Brief instructions The headings numbered (A, B, C ...) show the operating sequence and can be used as a brief guide to using your dryer. A Sort the laundry To ensure an even drying result sort laundry according to: . . . the drying level required . ....

[Page 18] Miele T 4819 Ci

D Select a programme ^ Select the programme you want. The indicator for the programme selected will light up. A drying level or extra option indicator may also light up and the duration may also be displayed. Drying level programmes – Cottons, Mini...

[Page 19] Miele T 4819 Ci

F Start the programme The Start/Stop button will flash when a programme is being selected. The flashing indicates that a programme can be started. ^ Press the Start/Stop button. The Start/Stop button will now light up constantly. The Perfect Dry indi...

[Page 20] Miele T 4819 Ci

Extra options Low temperature Delicate and minimum iron fabrics with the r symbol on the care label (e.g. acrylic garments) are dried at a lower temperature. The programme duration is longer. On some programmes Low temperature is permanently activate...

[Page 21] Miele T 4819 Ci

Cottons Max. load 6 kg* Extra dry, Normal** Fabric Single and multi-layered cotton fabrics such as towelling, T-shirts, underwear, flannelette bed linen and baby clothes Note – Select Extra dry for multi-layered and very thick fabrics. – Do not u...

[Page 22] Miele T 4819 Ci

Woollens handcare Max. load 2 kg* Fabric Woollen fabrics Note – This programme only fluffs up woollen garments. They are not dried completely by this programme. – Remove garments as soon as the programme has finished and leave to finish drying at...

[Page 23] Miele T 4819 Ci

Shirts Max. load 2 kg* Normal, Hand iron Fabric Shirts and blouses. Low temperature Select the Low temperature option for delicate fabrics with the r symbol on the care label. Cool air Max. load 6 kg* Fabric Any item which only needs airing. Warm air...

[Page 24] Miele T 4819 Ci

Once a programme has started - changing the programme You cannot change to another programme once a programme has started (this prevents unintentional alterations). You will need to cancel the current programme before you can select a new one. - canc...

[Page 25] Miele T 4819 Ci

The system lock prevents the dryer being used without your knowledge. It can be activated if wished. The dryer's electronics are then locked. The dryer can still be switched on but a programme cannot be started. – If an attempt is made to star...

[Page 26] Miele T 4819 Ci

Emptying the condensed water container The condensed water will be collected in the condensed water container unless the dryer has been connected for external drainage (see "Installation"). Empty the condensed water container after every dr...

[Page 27] Miele T 4819 Ci

Cleaning the fluff filters The fluff which is created by the drying process is collected by the fluff filters in the door and the door opening. Clean the filters after each drying programme*. Cleaning them whilst dry Tip: You can also use a vacuum cl...

[Page 28] Miele T 4819 Ci

Cleaning them with water If there is a great deal of compacted fluff on any of the filters, they can be removed and cleaned under hot running water. ^ Open the door and pull the fluff filter out of the door as described previously. The two filters in...

[Page 29] Miele T 4819 Ci

Cleaning the tumble dryer Disconnect the tumble dryer from the mains electricity supply. Miele branded cleaning and conditioning products are available to order via the internet on www.miele-shop.com. ^ Clean the housing and control panel with a slig...

[Page 30] Miele T 4819 Ci

Cleaning the condenser unit Detergent residue, hair and fine fluff from the dryer can get through the fluff filters and block the condenser unit. Dust from the room in which the dryer is installed can also get into the condenser unit and cause a bloc...

[Page 31] Miele T 4819 Ci

^ Pull the condenser unit out of its housing by the handle. Checking the condenser unit ^ Hold the condenser unit up to the light as shown. ^ Check to see if there is any fluff inside it. The arrows in the illustration above indicate where to look. I...

[Page 32] Miele T 4819 Ci

^ Then flush the unit through from the front. ^ Check the condenser unit again for any visible fluff and if necessary flush it through again until it has all gone. ^ Repeat as required. ^ Also make sure the rubber seals are clean. The rubber seals mu...

[Page 33] Miele T 4819 Ci

With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. , Repair work to electrical appliances should only b...

[Page 34] Miele T 4819 Ci

Problem Possible cause Remedy The Clean out airways indicator light comes on. The dryer is not working efficiently or economically. Possible cause: the filters are clogged with fluff or with detergent residues. – Cleaning the filters is usually all...

[Page 35] Miele T 4819 Ci

Problem Possible cause Remedy The Start/Stop button is flashing slowly and the display is dark. The dryer is in Standby mode. This is quite normal and not indicative of any fault. See "Programmable functions". Sometimes a programme cannot b...

[Page 36] Miele T 4819 Ci

An unsatisfactory drying result Problem Possible cause Remedy The laundry is not sufficiently dry. The load consisted of different fabrics. – Finish drying using the Warm air programme. – Select a different programme next time *. Items made of sy...

[Page 37] Miele T 4819 Ci

Other problems Problem Possible cause Remedy The drying process goes on too long or even switches off. In some circumstances, the Clean out airways indicator light still comes on, even though the filters are clean. Please check all the possible cause...

[Page 38] Miele T 4819 Ci

Problem Possible cause Remedy Water leaks from the dryer after the condenser unit has been cleaned. – The inner cover of the condenser unit has not been locked properly and/or the condenser unit has not been positioned correctly. – Fluff has coll...

[Page 39] Miele T 4819 Ci

Changing the lamp Disconnect the tumble dryer from the mains electricity supply. ^ Open the door. You will find the interior light cover at the top of the drum aperture. ^ Insert a suitable tool, such as a wide bladed screwdriver, under the side edge...

[Page 40] Miele T 4819 Ci

Repairs In the event of any faults which you cannot remedy yourself, please contact – your Miele dealer or – the Miele Service Department (see back cover for contact details). When contacting your dealer or the Service Department, please quote th...

[Page 41] Miele T 4819 Ci

Front view a Mains connection cable b Condensed water container c Control panel d Door (can be fitted with a decor panel) e Service panel for condenser unit f Four height adjustable screw feet g External drainage options (e.g. via wash basin, wash ba...

[Page 42] Miele T 4819 Ci

Installation site , Make sure the dryer door can be opened without hindrance after installation. Building under a continous worktop / in a kitchen run This tumble dryer is specially designed for installation under a continuous worktop run in a fitted...

[Page 43] Miele T 4819 Ci

Levelling the appliance ^ Turn the 4 screw feet to adjust the dryer to the correct height and level. Longer screw feet are available as an optional accessory. Unscrew and remove the feet supplied with the appliance before fitting the longer screw fee...

[Page 44] Miele T 4819 Ci

Matching the fascia panel to the height of adjacent drawer fronts The fascia panel can be aligned with the drawer fronts by adjusting the spacer bars. ^ Using a socket spanner, turn clockwise or anti-clockwise until the required height is reached. If...

[Page 45] Miele T 4819 Ci

Fitting the front panel The appliance front can be fitted with a door panel to match other kitchen units. If fitted in a Miele kitchen, the door panel can be ordered pre-drilled with the necessary fixing holes. If fitted in a non-Miele kitchen, a sui...

[Page 46] Miele T 4819 Ci

Fitting a door front panel made by another manufacturer Preparing the front panel A Measure distance X for drilling the hinge holes. – with spacer bars: – without spacer bars: (the front panel must be correspondingly higher) B Mark the two hinge ...

[Page 47] Miele T 4819 Ci

For right hand hinging only: – front panel shown decor side face down, upper edge at the bottom: if width (b) increases, measurement a must also be increased b = 592 mm N a = 21.5 mm b = 593 mm N a = 22.0 mm b = 594 mm N a = 22.5 mm b = 595 mm N a ...

[Page 48] Miele T 4819 Ci

Fitting a plinth facing The gap between the lower edge of the tumble dryer plinth and the floor can be closed up using a suitable kitchen furniture plinth facing. The tumble dryer plinth has a special groove in which a plinth facing can be fitted. Pl...

[Page 49] Miele T 4819 Ci

External condensed water outlet General notes When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer. The condensed water can also be drained off directly if the dryer ...

[Page 50] Miele T 4819 Ci

External drainage via a sink or gully ^ See "Front view" illustration. , If you want to drain the water off into a sink you will need to secure the hose carefully, e.g. by tying it to a tap to make sure it cannot slip during use. Otherwise ...

[Page 51] Miele T 4819 Ci

1 Adapter 2 Nut 3 Hose clip 4 Extension hose (accessory) 5 Non-return valve (accessory) 6 Tumble dryer drain hose ^ Fit adapter 1 to the sink drain outlet using nut 2. If this nut has a flat disc in it you should take the disc out first. ^ Attach the...

[Page 52] Miele T 4819 Ci

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Ensure power is not supplied to the applia...

[Page 53] Miele T 4819 Ci

Load 1 Final spin speed in a domestic washing machine Residual moisture Energy Duration kg rpm % kWh min. Cottons Normal 2 6.0 3.0 1000 1000 60 60 3.58 2.00 99 59 Cottons Normal 6.0 6.0 6.0 6.0 1200 1400 1600 1800 53 50 44 43 3.25 3.10 2.75 2.70 91 8...

[Page 54] Miele T 4819 Ci

Height 820 mm Width 595 mm Depth 575 mm Suitable for stacking Yes Weight 54 kg Drum volume 100 litres Maximum capacity 6 kg dry weight Capacity of condensed water container approx. 3.5 litres Drain hose length 950 mm Maximum delivery head 1.5 m Maxim...

[Page 55] Miele T 4819 Ci

Altering the residual moisture level in the Cottons programme The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default residu...

[Page 56] Miele T 4819 Ci

Altering the residual moisture level in the Minimum iron programme The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default r...

[Page 57] Miele T 4819 Ci

Anti-crease Anti-crease helps prevent creasing, if laundry is not normally removed im - mediately after the end of a programme. The anti-crease function – is activated when the tumble dryer is delivered. You can shorten the duration of the anti-cre...

[Page 58] Miele T 4819 Ci

Altering the volume of the buzzer The buzzer has two volumes. Follow the steps (A,B,C ...) to programme and store in memory. Before you begin, ensure that: – The tumble dryer is switched off. – The door is closed. A Press the Start/Stop button an...

[Page 59] Miele T 4819 Ci

Altering the standard drying level in the Automatic plus programme The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default r...

[Page 60] Miele T 4819 Ci

Extending the cooling down time The cooling down phase which takes place before the end of a programme can be extended by 5 or 10 minutes, if required. This makes the garments easier to handle. The cooling down time can only be extended for programme...

[Page 61] Miele T 4819 Ci

Standby To save energy, the display and the programme sequence/check lights go out after 10 minutes and the Start/Stop button starts flashing slowly. To come out of standby mode ^ Turn the programme selector or press a button. Neither will have any e...

[Page 62] Miele T 4819 Ci

Before you begin, ensure that: – The tumble dryer is switched off. – The door is closed. A Press the Start/Stop button and keep it pressed in whilst carrying out steps B-C. B Switch the dryer on. Wait until the Start/Stop button lights up constan...

[Page 63] Miele T 4819 Ci

Memory function The electronics will memorise any extra options selected for a programme. The duration selected for the Warm air or Cool air timed drying programmes will also be stored in memory. These settings will be selected automatically the next...

[Page 64] Miele T 4819 Ci

Clean out airways indicator Fluff should be removed after drying. The Clean out airways indicator will remind you to clean the filters when a certain amount of fluff has collected in the filters. You can decide at what level of fluff this reminder sh...

[Page 65] Miele T 4819 Ci

Keypad tone An audible tone sounds each time a button is pressed. Follow the steps (A,B,C ...) to programme and store in memory. Before you begin, ensure that: – The tumble dryer is switched off. – The door is closed. A Press the Start/Stop butto...

[Page 66] Miele T 4819 Ci

Adjusting the dryer's electronics for very soft water , In some areas of the UK, water is extremely soft which can affect the sensitivity of the control electronics. If the dryer is installed in an area of very soft water, you should contact you...

[Page 67] Miele T 4819 Ci

Extending the range of the drying levels You can extend the range of the drying levels for many of the programmes: Machine iron+ (drier than Machine iron). Slightly dry (drier than Hand iron). Normal+ (drier than Normal). This programmable function i...

[Page 68] Miele T 4819 Ci

M.-Nr. 07 844 000 / 06 Alteration rights reserved/0113 ...