Download or browse on-line these Operation & User’s Manual for Optoma PRO160S Projector.
This manual for Optoma PRO160S, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 60 pages, and the size of the file at download is . The document type is Operation & User’s Manual.
In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Optoma PRO160S. Just click one of the links below to go to the selected manual:
Pages: 2
Pages: 5
[Page 1] Optoma PRO160S
1 English Table of Contents ............................1 Usage Notice ...................................2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings .................
[Page 2] Optoma PRO160S
2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suf�...
[Page 3] Optoma PRO160S
3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt and damage...
[Page 4] Optoma PRO160S
4 English Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC...
[Page 5] Optoma PRO160S
5 English Usage Notice Eye Safety Warnings ▀■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students w...
[Page 6] Optoma PRO160S
6 English Introduction Documentation : User’s Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) Due to different applications in each Country, some regions may have different accessories. ...
[Page 7] Optoma PRO160S
7 English Introduction VGA-IN / SCART / YPbPr VGA-OUT HDMI S-VIDEO VIDEO RS-232 AUDIO-IN AUDIO-OUT Product Overview Main Unit 2 4 6 6 3 1 5 8 7 6 1. Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens 5. IR Receiver 6. Tilt-Adjustment Feet ...
[Page 8] Optoma PRO160S
8 English Introduction 1. Power/Standby 2. Menu 3. Source 4. Enter 5. Re-Sync 6. Temp LED 7. Lamp LED 8. Power LED 9. Four Directional Select Keys 10. Keystone Correction Control Panel 2 1 6 7 8 5 10 3 4 9 ...
[Page 9] Optoma PRO160S
9 English Introduction Input/Output Connections 1. VGA-In/SCART/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr/ SCART) 2. VGA-Out Connector (Monitor Loop-through Output) 3. HDMI Connector 4. S-Video Input Connector 5. Com...
[Page 10] Optoma PRO160S
10 English Introduction HDMI Remote Control 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. No function 5. No function 6. Re-Sync 7. No function 8. Volume +/- 9. ZOOM 10. AV mute 11. Video 12. No function 13. No...
[Page 11] Optoma PRO160S
11 English Installation Connect to Computer/Notebook Connecting the Projector Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory 1............................
[Page 12] Optoma PRO160S
12 English Installation Connect to Video Sources Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory VGA-IN / SCART / YPbPr VGA-OUT HDMI S-VIDEO VIDEO RS-2...
[Page 13] Optoma PRO160S
13 English Installation Powering the projector On / Off Turn on the projector rst and then select the signal sources. Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When conn...
[Page 14] Optoma PRO160S
14 English Installation Contact the nearest service center if the projector displays these symptoms. See pages 57-58 for more information. Warning Indicator When the warning indicators (see below) come on, the projector will automatic...
[Page 15] Optoma PRO160S
15 English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the project...
[Page 16] Optoma PRO160S
16 English Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. SVGA/XGA series: The projector will focus at distances from 3.28 to 39.4 feet (1.0 to 12.0 meters). WXGA serie...
[Page 17] Optoma PRO160S
17 English Installation This table is for user’s reference only. SVGA/XGA This table is for user’s reference only. WXGA Diagonal length (inch) size of 4:3 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (inch) (m) (fee...
[Page 18] Optoma PRO160S
18 English User Controls Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 13-14. RE-SYNC Automatically synchronize the projector to the input source. Enter Conrm your item selection. SOURCE Press “S...
[Page 19] Optoma PRO160S
19 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. L Button No function. R Button No function. Page + No function. Page - No function. Enter Conrm you...
[Page 20] Optoma PRO160S
20 English User Controls Using the Remote Control AV mute Momentarily turns off/on the audio and video. S-Video Press “S-Video” to choose S-Video source. VGA Press “VGA” to choose VGA sources. Video Press “Video” to choose Composite vi...
[Page 21] Optoma PRO160S
21 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD men...
[Page 22] Optoma PRO160S
22 English User Controls Menu Tree Main Menu Sub Menu Settings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / Standard 0~10 Color Temp. Warm / Medium / Cold Colo...
[Page 23] Optoma PRO160S
23 English User Controls Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. (#1) “Color” and “Tint” are only supported in Video mode. (#2) ...
[Page 24] Optoma PRO160S
24 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Moive: For home the...
[Page 25] Optoma PRO160S
25 English User Controls Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color. P...
[Page 26] Optoma PRO160S
26 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Gr...
[Page 27] Optoma PRO160S
27 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB or YUV. Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Ent...
[Page 28] Optoma PRO160S
28 English User Controls DISPLAY Format Use this function to choose your desired aspect ratio. SVGA/XGA 4:3: This format is for 4×3 input sources. 16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide ...
[Page 29] Optoma PRO160S
29 English User Controls WXGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widesc...
[Page 30] Optoma PRO160S
30 English User Controls Each I/O has different setting of “Edge Mask”. “Edge Mask” and “Zoom” can’t work at same time. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove v...
[Page 31] Optoma PRO160S
31 English User Controls 3D Mode Off: Select “Off” to turn 3D settings off for 3D images. DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images. IR: Select “IR” to use optimized settings for...
[Page 32] Optoma PRO160S
32 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Projection Front-...
[Page 33] Optoma PRO160S
33 English User Controls Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Screen Type Choose the screen type from16:10 or 16:9. Project...
[Page 34] Optoma PRO160S
34 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the singal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto- matic, the phase, frequency items will appear for user to ...
[Page 35] Optoma PRO160S
35 English User Controls SETUP | Security Security On: Choose “On” to use security verication when the turning on the projector. Off: Choose “Off” to be able to switch on the projector without password verication. Secur...
[Page 36] Optoma PRO160S
36 English User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local ofce for support. ...
[Page 37] Optoma PRO160S
37 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. Neutral: Neutr...
[Page 38] Optoma PRO160S
38 English User Controls Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans...
[Page 39] Optoma PRO160S
39 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or o...
[Page 40] Optoma PRO160S
40 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours...
[Page 41] Optoma PRO160S
41 English Appendices No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken. ...
[Page 42] Optoma PRO160S
42 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display...
[Page 43] Optoma PRO160S
43 English Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 16. The image is stretched wh...
[Page 44] Optoma PRO160S
44 English Appendices The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Check that “Keypad Lock” is not activated b...
[Page 45] Optoma PRO160S
45 English Appendices On Screen Messages Temperature warning: Fan failed: Lamp warning: Out of display range: If the remote control does not work Check the operating angle of the remote control is within ±15°...
[Page 46] Optoma PRO160S
46 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service...
[Page 47] Optoma PRO160S
47 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on t...
[Page 48] Optoma PRO160S
48 English Appendices For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models. 120Hz input signals may be dependent on graphics cards support. Please note that using resolu- tions ...
[Page 49] Optoma PRO160S
49 English Appendices XGA 1024 × 768 75 60.00 V V XGA 1024 × 768 85 68.70 V XGA 1024 × 768 120 - V 1152 × 864 60 - V 1152 × 864 70 - V 1152 × 864 75 - V 1152 × 864 85 - V 1152 × 870 75 - V V HD 1280 x 720 50 - V V HD 1280 x 720 60 45.00 V V ...
[Page 50] Optoma PRO160S
50 English Appendices Video Compatibility Computer Compatibility Mode Resolution V-Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 75 60.24 MAC 115...
[Page 51] Optoma PRO160S
51 English Appendices RS232 Pin Assignments Pin no. Spec. (from projector side) 1 TXD 2 RXD 3 GND RS232 Commands and Protocol Function List 3 1 2 RS232 shell is grounded. ...
[Page 52] Optoma PRO160S
52 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII...
[Page 53] Optoma PRO160S
53 English Appendices --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX45 n...
[Page 54] Optoma PRO160S
54 English Appendices --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX100 ...
[Page 55] Optoma PRO160S
55 English Appendices --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ~XX150 ...
[Page 56] Optoma PRO160S
56 English Appendices Please note that damage resulting from incorrect installation will void the warranty. Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a ...
[Page 57] Optoma PRO160S
57 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www.optomausa.com [email protected] Canada 2420 Meadowpine Blvd., Suite #105 ...
[Page 58] Optoma PRO160S
58 English Appendices Latin America 3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www.optoma.com.br www.optoma.com.mx Korea WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOREA +82+2+34430005...
[Page 59] Optoma PRO160S
59 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the F...
[Page 60] Optoma PRO160S
60 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device co...
Specifications (2 pages)
Datasheet (1 pages)
Brochure (18 pages)
Brochure & specs (2 pages)